[PATCH 00/10] ALSA: aloop: Support selection of snd_timer
With the following patch set any sound timer can be used as timer source for the aloop devices if selected. It can be select by the additional timer_source kernel module parameter: -2 the jiffies timer will be used as done without this patch (default) -1 the sound timer will be selected depending on the linked sound cards (snd_pcm_link()). The sound timer of the first linked card which is not a aloop device nor a dummy device will be used. 0..N Select the sound timer by the card number.
This patch set is required for forwarding audio data between a HW sound card and an aloop device without the usage of an asynchronous sample rate converter.
Best regards,
Timo
From: Timo Wischer twischer@de.adit-jv.com
Describe the unit of the variables used to calculate the hw pointer depending on jiffies ticks.
Signed-off-by: Timo Wischer twischer@de.adit-jv.com --- sound/drivers/aloop.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/sound/drivers/aloop.c b/sound/drivers/aloop.c index 8c3fbe1..70145e6 100644 --- a/sound/drivers/aloop.c +++ b/sound/drivers/aloop.c @@ -116,8 +116,10 @@ struct loopback_pcm { /* flags */ unsigned int period_update_pending :1; /* timer stuff */ - unsigned int irq_pos; /* fractional IRQ position */ - unsigned int period_size_frac; + unsigned int irq_pos; /* fractional IRQ position in jiffies + * ticks + */ + unsigned int period_size_frac; /* period size in jiffies ticks */ unsigned int last_drift; unsigned long last_jiffies; struct timer_list timer;
From: Timo Wischer twischer@de.adit-jv.com
This is required for additional timer implementations which could detect errors and want to throw them.
Signed-off-by: Timo Wischer twischer@de.adit-jv.com --- sound/drivers/aloop.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/sound/drivers/aloop.c b/sound/drivers/aloop.c index 70145e6..f0c7b5b 100644 --- a/sound/drivers/aloop.c +++ b/sound/drivers/aloop.c @@ -169,7 +169,7 @@ static inline unsigned int get_rate_shift(struct loopback_pcm *dpcm) }
/* call in cable->lock */ -static void loopback_timer_start(struct loopback_pcm *dpcm) +static int loopback_timer_start(struct loopback_pcm *dpcm) { unsigned long tick; unsigned int rate_shift = get_rate_shift(dpcm); @@ -185,6 +185,8 @@ static void loopback_timer_start(struct loopback_pcm *dpcm) tick = dpcm->period_size_frac - dpcm->irq_pos; tick = (tick + dpcm->pcm_bps - 1) / dpcm->pcm_bps; mod_timer(&dpcm->timer, jiffies + tick); + + return 0; }
/* call in cable->lock */ @@ -265,7 +267,7 @@ static int loopback_trigger(struct snd_pcm_substream *substream, int cmd) struct snd_pcm_runtime *runtime = substream->runtime; struct loopback_pcm *dpcm = runtime->private_data; struct loopback_cable *cable = dpcm->cable; - int err, stream = 1 << substream->stream; + int err = 0, stream = 1 << substream->stream;
switch (cmd) { case SNDRV_PCM_TRIGGER_START: @@ -278,7 +280,7 @@ static int loopback_trigger(struct snd_pcm_substream *substream, int cmd) spin_lock(&cable->lock); cable->running |= stream; cable->pause &= ~stream; - loopback_timer_start(dpcm); + err = loopback_timer_start(dpcm); spin_unlock(&cable->lock); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) loopback_active_notify(dpcm); @@ -306,7 +308,7 @@ static int loopback_trigger(struct snd_pcm_substream *substream, int cmd) spin_lock(&cable->lock); dpcm->last_jiffies = jiffies; cable->pause &= ~stream; - loopback_timer_start(dpcm); + err = loopback_timer_start(dpcm); spin_unlock(&cable->lock); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) loopback_active_notify(dpcm); @@ -314,7 +316,7 @@ static int loopback_trigger(struct snd_pcm_substream *substream, int cmd) default: return -EINVAL; } - return 0; + return err; }
static void params_change(struct snd_pcm_substream *substream)
From: Timo Wischer twischer@de.adit-jv.com
This is required for additional timer implementations which could detect errors and want to throw them.
Signed-off-by: Timo Wischer twischer@de.adit-jv.com --- sound/drivers/aloop.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/sound/drivers/aloop.c b/sound/drivers/aloop.c index f0c7b5b..11e8ed6 100644 --- a/sound/drivers/aloop.c +++ b/sound/drivers/aloop.c @@ -190,15 +190,19 @@ static int loopback_timer_start(struct loopback_pcm *dpcm) }
/* call in cable->lock */ -static inline void loopback_timer_stop(struct loopback_pcm *dpcm) +static inline int loopback_timer_stop(struct loopback_pcm *dpcm) { del_timer(&dpcm->timer); dpcm->timer.expires = 0; + + return 0; }
-static inline void loopback_timer_stop_sync(struct loopback_pcm *dpcm) +static inline int loopback_timer_stop_sync(struct loopback_pcm *dpcm) { del_timer_sync(&dpcm->timer); + + return 0; }
#define CABLE_VALID_PLAYBACK (1 << SNDRV_PCM_STREAM_PLAYBACK) @@ -289,7 +293,7 @@ static int loopback_trigger(struct snd_pcm_substream *substream, int cmd) spin_lock(&cable->lock); cable->running &= ~stream; cable->pause &= ~stream; - loopback_timer_stop(dpcm); + err = loopback_timer_stop(dpcm); spin_unlock(&cable->lock); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) loopback_active_notify(dpcm); @@ -298,7 +302,7 @@ static int loopback_trigger(struct snd_pcm_substream *substream, int cmd) case SNDRV_PCM_TRIGGER_SUSPEND: spin_lock(&cable->lock); cable->pause |= stream; - loopback_timer_stop(dpcm); + err = loopback_timer_stop(dpcm); spin_unlock(&cable->lock); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) loopback_active_notify(dpcm); @@ -337,9 +341,11 @@ static int loopback_prepare(struct snd_pcm_substream *substream) struct snd_pcm_runtime *runtime = substream->runtime; struct loopback_pcm *dpcm = runtime->private_data; struct loopback_cable *cable = dpcm->cable; - int bps, salign; + int err, bps, salign;
- loopback_timer_stop_sync(dpcm); + err = loopback_timer_stop_sync(dpcm); + if (err < 0) + return err;
salign = (snd_pcm_format_width(runtime->format) * runtime->channels) / 8;
From: Timo Wischer twischer@de.adit-jv.com
to allow the usage of timer callbacks from interrupt context. For example the sound timer.
Signed-off-by: Timo Wischer twischer@de.adit-jv.com --- sound/drivers/aloop.c | 33 +++++++++++++++++++-------------- 1 file changed, 19 insertions(+), 14 deletions(-)
diff --git a/sound/drivers/aloop.c b/sound/drivers/aloop.c index 11e8ed6..c6217c4 100644 --- a/sound/drivers/aloop.c +++ b/sound/drivers/aloop.c @@ -272,6 +272,7 @@ static int loopback_trigger(struct snd_pcm_substream *substream, int cmd) struct loopback_pcm *dpcm = runtime->private_data; struct loopback_cable *cable = dpcm->cable; int err = 0, stream = 1 << substream->stream; + unsigned long flags;
switch (cmd) { case SNDRV_PCM_TRIGGER_START: @@ -281,39 +282,39 @@ static int loopback_trigger(struct snd_pcm_substream *substream, int cmd) dpcm->last_jiffies = jiffies; dpcm->pcm_rate_shift = 0; dpcm->last_drift = 0; - spin_lock(&cable->lock); + spin_lock_irqsave(&cable->lock, flags); cable->running |= stream; cable->pause &= ~stream; err = loopback_timer_start(dpcm); - spin_unlock(&cable->lock); + spin_unlock_irqrestore(&cable->lock, flags); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) loopback_active_notify(dpcm); break; case SNDRV_PCM_TRIGGER_STOP: - spin_lock(&cable->lock); + spin_lock_irqsave(&cable->lock, flags); cable->running &= ~stream; cable->pause &= ~stream; err = loopback_timer_stop(dpcm); - spin_unlock(&cable->lock); + spin_unlock_irqrestore(&cable->lock, flags); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) loopback_active_notify(dpcm); break; case SNDRV_PCM_TRIGGER_PAUSE_PUSH: case SNDRV_PCM_TRIGGER_SUSPEND: - spin_lock(&cable->lock); + spin_lock_irqsave(&cable->lock, flags); cable->pause |= stream; err = loopback_timer_stop(dpcm); - spin_unlock(&cable->lock); + spin_unlock_irqrestore(&cable->lock, flags); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) loopback_active_notify(dpcm); break; case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: case SNDRV_PCM_TRIGGER_RESUME: - spin_lock(&cable->lock); + spin_lock_irqsave(&cable->lock, flags); dpcm->last_jiffies = jiffies; cable->pause &= ~stream; err = loopback_timer_start(dpcm); - spin_unlock(&cable->lock); + spin_unlock_irqrestore(&cable->lock, flags); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) loopback_active_notify(dpcm); break; @@ -557,12 +558,13 @@ static snd_pcm_uframes_t loopback_pointer(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; struct loopback_pcm *dpcm = runtime->private_data; + unsigned long flags; snd_pcm_uframes_t pos;
- spin_lock(&dpcm->cable->lock); + spin_lock_irqsave(&dpcm->cable->lock, flags); loopback_pos_update(dpcm->cable); pos = dpcm->buf_pos; - spin_unlock(&dpcm->cable->lock); + spin_unlock_irqrestore(&dpcm->cable->lock, flags); return bytes_to_frames(runtime, pos); }
@@ -679,10 +681,12 @@ static void free_cable(struct snd_pcm_substream *substream) if (!cable) return; if (cable->streams[!substream->stream]) { + unsigned long flags; + /* other stream is still alive */ - spin_lock_irq(&cable->lock); + spin_lock_irqsave(&cable->lock, flags); cable->streams[substream->stream] = NULL; - spin_unlock_irq(&cable->lock); + spin_unlock_irqrestore(&cable->lock, flags); } else { /* free the cable */ loopback->cables[substream->number][dev] = NULL; @@ -698,6 +702,7 @@ static int loopback_open(struct snd_pcm_substream *substream) struct loopback_cable *cable = NULL; int err = 0; int dev = get_cable_index(substream); + unsigned long flags;
mutex_lock(&loopback->cable_lock); dpcm = kzalloc(sizeof(*dpcm), GFP_KERNEL); @@ -753,9 +758,9 @@ static int loopback_open(struct snd_pcm_substream *substream) else runtime->hw = cable->hw;
- spin_lock_irq(&cable->lock); + spin_lock_irqsave(&cable->lock, flags); cable->streams[substream->stream] = dpcm; - spin_unlock_irq(&cable->lock); + spin_unlock_irqrestore(&cable->lock, flags);
unlock: if (err < 0) {
From: Timo Wischer twischer@de.adit-jv.com
This commit only refectors the implementation. It does not change the behaviour. It is required to support other timers (e.g sound timer).
Signed-off-by: Timo Wischer twischer@de.adit-jv.com --- sound/drivers/aloop.c | 113 +++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 94 insertions(+), 19 deletions(-)
diff --git a/sound/drivers/aloop.c b/sound/drivers/aloop.c index c6217c4..422d130 100644 --- a/sound/drivers/aloop.c +++ b/sound/drivers/aloop.c @@ -69,8 +69,39 @@ MODULE_PARM_DESC(pcm_notify, "Break capture when PCM format/rate/channels change
#define NO_PITCH 100000
+struct loopback_cable; struct loopback_pcm;
+struct loopback_ops { + /* optional + * call in loopback->cable_lock + */ + int (*open)(struct loopback_pcm *dpcm); + /* required + * call in cable->lock + */ + int (*start)(struct loopback_pcm *dpcm); + /* required + * call in cable->lock + */ + int (*stop)(struct loopback_pcm *dpcm); + /* optional */ + int (*stop_sync)(struct loopback_pcm *dpcm); + /* optional */ + int (*close_substream)(struct loopback_pcm *dpcm); + /* optional + * call in loopback->cable_lock + */ + int (*close_cable)(struct loopback_pcm *dpcm); + /* optional + * call in cable->lock + */ + unsigned int (*pos_update)(struct loopback_cable *cable); + /* optional */ + void (*dpcm_info)(struct loopback_pcm *dpcm, + struct snd_info_buffer *buffer); +}; + struct loopback_cable { spinlock_t lock; struct loopback_pcm *streams[2]; @@ -79,6 +110,8 @@ struct loopback_cable { unsigned int valid; unsigned int running; unsigned int pause; + /* timer specific */ + struct loopback_ops *ops; };
struct loopback_setup { @@ -285,7 +318,7 @@ static int loopback_trigger(struct snd_pcm_substream *substream, int cmd) spin_lock_irqsave(&cable->lock, flags); cable->running |= stream; cable->pause &= ~stream; - err = loopback_timer_start(dpcm); + err = cable->ops->start(dpcm); spin_unlock_irqrestore(&cable->lock, flags); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) loopback_active_notify(dpcm); @@ -294,7 +327,7 @@ static int loopback_trigger(struct snd_pcm_substream *substream, int cmd) spin_lock_irqsave(&cable->lock, flags); cable->running &= ~stream; cable->pause &= ~stream; - err = loopback_timer_stop(dpcm); + err = cable->ops->stop(dpcm); spin_unlock_irqrestore(&cable->lock, flags); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) loopback_active_notify(dpcm); @@ -303,7 +336,7 @@ static int loopback_trigger(struct snd_pcm_substream *substream, int cmd) case SNDRV_PCM_TRIGGER_SUSPEND: spin_lock_irqsave(&cable->lock, flags); cable->pause |= stream; - err = loopback_timer_stop(dpcm); + err = cable->ops->stop(dpcm); spin_unlock_irqrestore(&cable->lock, flags); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) loopback_active_notify(dpcm); @@ -313,7 +346,7 @@ static int loopback_trigger(struct snd_pcm_substream *substream, int cmd) spin_lock_irqsave(&cable->lock, flags); dpcm->last_jiffies = jiffies; cable->pause &= ~stream; - err = loopback_timer_start(dpcm); + err = cable->ops->start(dpcm); spin_unlock_irqrestore(&cable->lock, flags); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) loopback_active_notify(dpcm); @@ -344,9 +377,11 @@ static int loopback_prepare(struct snd_pcm_substream *substream) struct loopback_cable *cable = dpcm->cable; int err, bps, salign;
- err = loopback_timer_stop_sync(dpcm); - if (err < 0) - return err; + if (cable->ops->stop_sync) { + err = cable->ops->stop_sync(dpcm); + if (err < 0) + return err; + }
salign = (snd_pcm_format_width(runtime->format) * runtime->channels) / 8; @@ -554,6 +589,18 @@ static void loopback_timer_function(struct timer_list *t) spin_unlock_irqrestore(&dpcm->cable->lock, flags); }
+static void loopback_jiffies_timer_dpcm_info(struct loopback_pcm *dpcm, + struct snd_info_buffer *buffer) +{ + snd_iprintf(buffer, " update_pending:\t%u\n", + dpcm->period_update_pending); + snd_iprintf(buffer, " irq_pos:\t\t%u\n", dpcm->irq_pos); + snd_iprintf(buffer, " period_frac:\t%u\n", dpcm->period_size_frac); + snd_iprintf(buffer, " last_jiffies:\t%lu (%lu)\n", + dpcm->last_jiffies, jiffies); + snd_iprintf(buffer, " timer_expires:\t%lu\n", dpcm->timer.expires); +} + static snd_pcm_uframes_t loopback_pointer(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; @@ -562,7 +609,8 @@ static snd_pcm_uframes_t loopback_pointer(struct snd_pcm_substream *substream) snd_pcm_uframes_t pos;
spin_lock_irqsave(&dpcm->cable->lock, flags); - loopback_pos_update(dpcm->cable); + if (dpcm->cable->ops->pos_update) + dpcm->cable->ops->pos_update(dpcm->cable); pos = dpcm->buf_pos; spin_unlock_irqrestore(&dpcm->cable->lock, flags); return bytes_to_frames(runtime, pos); @@ -688,12 +736,33 @@ static void free_cable(struct snd_pcm_substream *substream) cable->streams[substream->stream] = NULL; spin_unlock_irqrestore(&cable->lock, flags); } else { + struct loopback_pcm *dpcm = substream->runtime->private_data; + + if (cable->ops && cable->ops->close_cable && dpcm) + cable->ops->close_cable(dpcm); /* free the cable */ loopback->cables[substream->number][dev] = NULL; kfree(cable); } }
+static int loopback_jiffies_timer_open(struct loopback_pcm *dpcm) +{ + timer_setup(&dpcm->timer, loopback_timer_function, 0); + + return 0; +} + +static struct loopback_ops loopback_jiffies_timer_ops = { + .open = loopback_jiffies_timer_open, + .start = loopback_timer_start, + .stop = loopback_timer_stop, + .stop_sync = loopback_timer_stop_sync, + .close_substream = loopback_timer_stop_sync, + .pos_update = loopback_pos_update, + .dpcm_info = loopback_jiffies_timer_dpcm_info, +}; + static int loopback_open(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; @@ -712,7 +781,6 @@ static int loopback_open(struct snd_pcm_substream *substream) } dpcm->loopback = loopback; dpcm->substream = substream; - timer_setup(&dpcm->timer, loopback_timer_function, 0);
cable = loopback->cables[substream->number][dev]; if (!cable) { @@ -723,9 +791,17 @@ static int loopback_open(struct snd_pcm_substream *substream) } spin_lock_init(&cable->lock); cable->hw = loopback_pcm_hardware; + cable->ops = &loopback_jiffies_timer_ops; loopback->cables[substream->number][dev] = cable; } dpcm->cable = cable; + runtime->private_data = dpcm; + + if (cable->ops->open) { + err = cable->ops->open(dpcm); + if (err < 0) + goto unlock; + }
snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
@@ -751,7 +827,9 @@ static int loopback_open(struct snd_pcm_substream *substream) if (err < 0) goto unlock;
- runtime->private_data = dpcm; + /* loopback_runtime_free() has not to be called if kfree(dpcm) was + * already called here. Otherwise it will end up with a double free. + */ runtime->private_free = loopback_runtime_free; if (get_notify(dpcm)) runtime->hw = loopback_pcm_hardware; @@ -775,12 +853,14 @@ static int loopback_close(struct snd_pcm_substream *substream) { struct loopback *loopback = substream->private_data; struct loopback_pcm *dpcm = substream->runtime->private_data; + int err = 0;
- loopback_timer_stop_sync(dpcm); + if (dpcm->cable->ops->close_substream) + err = dpcm->cable->ops->close_substream(dpcm); mutex_lock(&loopback->cable_lock); free_cable(substream); mutex_unlock(&loopback->cable_lock); - return 0; + return err; }
static const struct snd_pcm_ops loopback_pcm_ops = { @@ -1103,13 +1183,8 @@ static void print_dpcm_info(struct snd_info_buffer *buffer, snd_iprintf(buffer, " bytes_per_sec:\t%u\n", dpcm->pcm_bps); snd_iprintf(buffer, " sample_align:\t%u\n", dpcm->pcm_salign); snd_iprintf(buffer, " rate_shift:\t\t%u\n", dpcm->pcm_rate_shift); - snd_iprintf(buffer, " update_pending:\t%u\n", - dpcm->period_update_pending); - snd_iprintf(buffer, " irq_pos:\t\t%u\n", dpcm->irq_pos); - snd_iprintf(buffer, " period_frac:\t%u\n", dpcm->period_size_frac); - snd_iprintf(buffer, " last_jiffies:\t%lu (%lu)\n", - dpcm->last_jiffies, jiffies); - snd_iprintf(buffer, " timer_expires:\t%lu\n", dpcm->timer.expires); + if (dpcm->cable->ops->dpcm_info) + dpcm->cable->ops->dpcm_info(dpcm, buffer); }
static void print_substream_info(struct snd_info_buffer *buffer,
From: Timo Wischer twischer@de.adit-jv.com
This commit does not change the behaviour. It only seperates the jiffies timer specific implementation from the generic part.
Signed-off-by: Timo Wischer twischer@de.adit-jv.com --- sound/drivers/aloop.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-)
diff --git a/sound/drivers/aloop.c b/sound/drivers/aloop.c index 422d130..3105757 100644 --- a/sound/drivers/aloop.c +++ b/sound/drivers/aloop.c @@ -202,7 +202,7 @@ static inline unsigned int get_rate_shift(struct loopback_pcm *dpcm) }
/* call in cable->lock */ -static int loopback_timer_start(struct loopback_pcm *dpcm) +static int loopback_jiffies_timer_start(struct loopback_pcm *dpcm) { unsigned long tick; unsigned int rate_shift = get_rate_shift(dpcm); @@ -223,7 +223,7 @@ static int loopback_timer_start(struct loopback_pcm *dpcm) }
/* call in cable->lock */ -static inline int loopback_timer_stop(struct loopback_pcm *dpcm) +static inline int loopback_jiffies_timer_stop(struct loopback_pcm *dpcm) { del_timer(&dpcm->timer); dpcm->timer.expires = 0; @@ -231,7 +231,7 @@ static inline int loopback_timer_stop(struct loopback_pcm *dpcm) return 0; }
-static inline int loopback_timer_stop_sync(struct loopback_pcm *dpcm) +static inline int loopback_jiffies_timer_stop_sync(struct loopback_pcm *dpcm) { del_timer_sync(&dpcm->timer);
@@ -517,7 +517,8 @@ static inline void bytepos_finish(struct loopback_pcm *dpcm, }
/* call in cable->lock */ -static unsigned int loopback_pos_update(struct loopback_cable *cable) +static unsigned int loopback_jiffies_timer_pos_update + (struct loopback_cable *cable) { struct loopback_pcm *dpcm_play = cable->streams[SNDRV_PCM_STREAM_PLAYBACK]; @@ -570,14 +571,15 @@ static unsigned int loopback_pos_update(struct loopback_cable *cable) return running; }
-static void loopback_timer_function(struct timer_list *t) +static void loopback_jiffies_timer_function(struct timer_list *t) { struct loopback_pcm *dpcm = from_timer(dpcm, t, timer); unsigned long flags;
spin_lock_irqsave(&dpcm->cable->lock, flags); - if (loopback_pos_update(dpcm->cable) & (1 << dpcm->substream->stream)) { - loopback_timer_start(dpcm); + if (loopback_jiffies_timer_pos_update(dpcm->cable) & + (1 << dpcm->substream->stream)) { + loopback_jiffies_timer_start(dpcm); if (dpcm->period_update_pending) { dpcm->period_update_pending = 0; spin_unlock_irqrestore(&dpcm->cable->lock, flags); @@ -748,18 +750,18 @@ static void free_cable(struct snd_pcm_substream *substream)
static int loopback_jiffies_timer_open(struct loopback_pcm *dpcm) { - timer_setup(&dpcm->timer, loopback_timer_function, 0); + timer_setup(&dpcm->timer, loopback_jiffies_timer_function, 0);
return 0; }
static struct loopback_ops loopback_jiffies_timer_ops = { .open = loopback_jiffies_timer_open, - .start = loopback_timer_start, - .stop = loopback_timer_stop, - .stop_sync = loopback_timer_stop_sync, - .close_substream = loopback_timer_stop_sync, - .pos_update = loopback_pos_update, + .start = loopback_jiffies_timer_start, + .stop = loopback_jiffies_timer_stop, + .stop_sync = loopback_jiffies_timer_stop_sync, + .close_substream = loopback_jiffies_timer_stop_sync, + .pos_update = loopback_jiffies_timer_pos_update, .dpcm_info = loopback_jiffies_timer_dpcm_info, };
From: Timo Wischer twischer@de.adit-jv.com
so all functions can use the same.
Signed-off-by: Timo Wischer twischer@de.adit-jv.com --- sound/drivers/aloop.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/sound/drivers/aloop.c b/sound/drivers/aloop.c index 3105757..85a1519 100644 --- a/sound/drivers/aloop.c +++ b/sound/drivers/aloop.c @@ -69,6 +69,10 @@ MODULE_PARM_DESC(pcm_notify, "Break capture when PCM format/rate/channels change
#define NO_PITCH 100000
+#define CABLE_VALID_PLAYBACK BIT(SNDRV_PCM_STREAM_PLAYBACK) +#define CABLE_VALID_CAPTURE BIT(SNDRV_PCM_STREAM_CAPTURE) +#define CABLE_VALID_BOTH (CABLE_VALID_PLAYBACK | CABLE_VALID_CAPTURE) + struct loopback_cable; struct loopback_pcm;
@@ -238,10 +242,6 @@ static inline int loopback_jiffies_timer_stop_sync(struct loopback_pcm *dpcm) return 0; }
-#define CABLE_VALID_PLAYBACK (1 << SNDRV_PCM_STREAM_PLAYBACK) -#define CABLE_VALID_CAPTURE (1 << SNDRV_PCM_STREAM_CAPTURE) -#define CABLE_VALID_BOTH (CABLE_VALID_PLAYBACK|CABLE_VALID_CAPTURE) - static int loopback_check_format(struct loopback_cable *cable, int stream) { struct snd_pcm_runtime *runtime, *cruntime;
From: Timo Wischer twischer@de.adit-jv.com
to do synchronous audio forwarding between hardware sound card and aloop devices. Such an audio route could look like the following: Sound card -> Loopback application -> ALSA loop device -> arecord
In this case the loopback device should use the sound timer of the sound card. Without this patch the loopback application has to implement an adaptive sample rate converter to align the different clocks of the different ALSA devices.
The used sound card can be selected when loading the module: $ modprobe snd_aloop enable=1 timer_source=[card] [card] can be replaced by the name of the sound card (e.g. I82801AAICH) or a card number (e.g. 0).
Signed-off-by: Timo Wischer twischer@de.adit-jv.com --- sound/drivers/aloop.c | 410 +++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 409 insertions(+), 1 deletion(-)
diff --git a/sound/drivers/aloop.c b/sound/drivers/aloop.c index 85a1519..a411aeb 100644 --- a/sound/drivers/aloop.c +++ b/sound/drivers/aloop.c @@ -36,12 +36,14 @@ #include <linux/wait.h> #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/stringify.h> #include <sound/core.h> #include <sound/control.h> #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/info.h> #include <sound/initval.h> +#include <sound/timer.h>
MODULE_AUTHOR("Jaroslav Kysela perex@perex.cz"); MODULE_DESCRIPTION("A loopback soundcard"); @@ -49,12 +51,15 @@ MODULE_LICENSE("GPL"); MODULE_SUPPORTED_DEVICE("{{ALSA,Loopback soundcard}}");
#define MAX_PCM_SUBSTREAMS 8 +#define TIMER_SRC_JIFFIES -1
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */ static bool enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 0}; static int pcm_substreams[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 8}; static int pcm_notify[SNDRV_CARDS]; +static char *timer_source[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = + __stringify(TIMER_SRC_JIFFIES)};
module_param_array(index, int, NULL, 0444); MODULE_PARM_DESC(index, "Index value for loopback soundcard."); @@ -67,6 +72,12 @@ MODULE_PARM_DESC(pcm_substreams, "PCM substreams # (1-8) for loopback driver."); module_param_array(pcm_notify, int, NULL, 0444); MODULE_PARM_DESC(pcm_notify, "Break capture when PCM format/rate/channels changes.");
+/* This parameter has to be kept read only because switch between jiffies and + * sound timer is not supported. + */ +module_param_array(timer_source, charp, NULL, 0444); +MODULE_PARM_DESC(timer_source, "Sound card number of timer to be used (>=0). -2 jiffies timer [default]."); + #define NO_PITCH 100000
#define CABLE_VALID_PLAYBACK BIT(SNDRV_PCM_STREAM_PLAYBACK) @@ -116,6 +127,13 @@ struct loopback_cable { unsigned int pause; /* timer specific */ struct loopback_ops *ops; + /* When loopback.timer_source > TIMER_SRC_JIFFIES */ + struct { + int owner; + struct snd_timer_id id; + struct tasklet_struct event_tasklet; + struct snd_timer_instance *instance; + } snd_timer; };
struct loopback_setup { @@ -136,6 +154,8 @@ struct loopback { struct loopback_cable *cables[MAX_PCM_SUBSTREAMS][2]; struct snd_pcm *pcm[2]; struct loopback_setup setup[MAX_PCM_SUBSTREAMS][2]; + char *timer_source_name; + int timer_source; };
struct loopback_pcm { @@ -159,6 +179,7 @@ struct loopback_pcm { unsigned int period_size_frac; /* period size in jiffies ticks */ unsigned int last_drift; unsigned long last_jiffies; + /* When loopback.timer_source <= TIMER_SRC_JIFFIES */ struct timer_list timer; };
@@ -227,6 +248,31 @@ static int loopback_jiffies_timer_start(struct loopback_pcm *dpcm) }
/* call in cable->lock */ +static int loopback_snd_timer_start(struct loopback_pcm *dpcm) +{ + int err; + + /* Loopback device has to use same period as timer card. Therefore + * wake up for each snd_pcm_period_elapsed() call of timer card. + */ + err = snd_timer_start(dpcm->cable->snd_timer.instance, 1); + if (err < 0) { + /* do not report error if trying to start but already + * running. For example called by opposit substream + * of the same cable + */ + if (err == -EBUSY) + return 0; + + pcm_err(dpcm->substream->pcm, "snd_timer_start(card %d) failed with %d", + dpcm->cable->snd_timer.id.card, err); + return err; + } + + return 0; +} + +/* call in cable->lock */ static inline int loopback_jiffies_timer_stop(struct loopback_pcm *dpcm) { del_timer(&dpcm->timer); @@ -235,6 +281,24 @@ static inline int loopback_jiffies_timer_stop(struct loopback_pcm *dpcm) return 0; }
+/* call in cable->lock */ +static int loopback_snd_timer_stop(struct loopback_pcm *dpcm) +{ + int err; + + /* only stop if both devices (playback and capture) are not running */ + if (dpcm->cable->running) + return 0; + err = snd_timer_stop(dpcm->cable->snd_timer.instance); + if (err < 0) { + pcm_err(dpcm->substream->pcm, "snd_timer_stop(card %d) failed with %d", + dpcm->cable->snd_timer.id.card, err); + return err; + } + + return 0; +} + static inline int loopback_jiffies_timer_stop_sync(struct loopback_pcm *dpcm) { del_timer_sync(&dpcm->timer); @@ -242,6 +306,29 @@ static inline int loopback_jiffies_timer_stop_sync(struct loopback_pcm *dpcm) return 0; }
+/* call in loopback->cable_lock */ +static int loopback_snd_timer_close_cable(struct loopback_pcm *dpcm) +{ + int err; + + /* wait till drain tasklet has finished if requested */ + tasklet_kill(&dpcm->cable->snd_timer.event_tasklet); + + /* will only be called from free_cable() when other stream was + * already closed. Other stream cannot be reopened as long as + * loopback->cable_lock is locked. Therefore no need to lock + * cable->lock; + */ + err = snd_timer_close(dpcm->cable->snd_timer.instance); + if (err < 0) { + pcm_err(dpcm->substream->pcm, "snd_timer_close(card %d) = %d", + dpcm->cable->snd_timer.id.card, err); + } + memset(&dpcm->cable->snd_timer, 0, sizeof(dpcm->cable->snd_timer)); + + return err; +} + static int loopback_check_format(struct loopback_cable *cable, int stream) { struct snd_pcm_runtime *runtime, *cruntime; @@ -368,6 +455,13 @@ static void params_change(struct snd_pcm_substream *substream) cable->hw.rate_max = runtime->rate; cable->hw.channels_min = runtime->channels; cable->hw.channels_max = runtime->channels; + + if (dpcm->loopback->timer_source > TIMER_SRC_JIFFIES) { + cable->hw.period_bytes_min = + frames_to_bytes(runtime, runtime->period_size); + cable->hw.period_bytes_max = cable->hw.period_bytes_min; + } + }
static int loopback_prepare(struct snd_pcm_substream *substream) @@ -591,6 +685,160 @@ static void loopback_jiffies_timer_function(struct timer_list *t) spin_unlock_irqrestore(&dpcm->cable->lock, flags); }
+/* call in cable->lock */ +static int loopback_snd_timer_check_resolution(struct snd_pcm_runtime *runtime, + unsigned long resolution) +{ + if (resolution != runtime->timer_resolution) { + struct loopback_pcm *dpcm = runtime->private_data; + struct loopback_cable *cable = dpcm->cable; + /* Worst case estimation of possible values for resolution + * resolution <= (512 * 1024) frames / 8kHz in nsec + * resolution <= 65.536.000.000 nsec + * + * period_size <= 65.536.000.000 nsec / 1000nsec/usec * 192kHz + + * 500.000 + * period_size <= 12.582.912.000.000 <64bit + * / 1.000.000 usec/sec + */ + const snd_pcm_uframes_t period_size_usec = resolution / 1000 * + runtime->rate; + /* round to nearest sample rate */ + const snd_pcm_uframes_t period_size = (period_size_usec + 500 * + 1000) / (1000 * 1000); + + pcm_err(dpcm->substream->pcm, "Period size (%lu frames) of loopback device is not corresponding to timer resolution (%lu nsec = %lu frames) of card %d. Use period size of %lu frames for loopback device.", + runtime->period_size, resolution, + period_size, cable->snd_timer.id.card, period_size); + return -EINVAL; + } + return 0; +} + +static void loopback_snd_timer_period_elapsed + (struct loopback_cable * const cable, const int event, + const unsigned long resolution) +{ + struct loopback_pcm *dpcm_play = + cable->streams[SNDRV_PCM_STREAM_PLAYBACK]; + struct loopback_pcm *dpcm_capt = + cable->streams[SNDRV_PCM_STREAM_CAPTURE]; + struct snd_pcm_runtime *valid_runtime; + unsigned int running, elapsed_bytes; + unsigned long flags; + + spin_lock_irqsave(&cable->lock, flags); + running = cable->running ^ cable->pause; + /* no need to do anything if no stream is running */ + if (!running) { + spin_unlock_irqrestore(&cable->lock, flags); + return; + } + + if (event == SNDRV_TIMER_EVENT_MSTOP) { + if (!dpcm_play || !dpcm_play->substream || + !dpcm_play->substream->runtime || + !dpcm_play->substream->runtime->status || + dpcm_play->substream->runtime->status->state != + SNDRV_PCM_STATE_DRAINING) { + spin_unlock_irqrestore(&cable->lock, flags); + return; + } + } + + valid_runtime = (running & (1 << SNDRV_PCM_STREAM_PLAYBACK)) ? + dpcm_play->substream->runtime : + dpcm_capt->substream->runtime; + + /* resolution is only valid for SNDRV_TIMER_EVENT_TICK events */ + if (event == SNDRV_TIMER_EVENT_TICK) { + /* The hardware rules guarantee that playback and capture period + * are the same. Therefore only one device has to be checked + * here. + */ + if (loopback_snd_timer_check_resolution(valid_runtime, + resolution) < 0) { + spin_unlock_irqrestore(&cable->lock, flags); + if (cable->running & (1 << SNDRV_PCM_STREAM_PLAYBACK)) + snd_pcm_stop_xrun(dpcm_play->substream); + if (cable->running & (1 << SNDRV_PCM_STREAM_CAPTURE)) + snd_pcm_stop_xrun(dpcm_capt->substream); + return; + } + } + + elapsed_bytes = frames_to_bytes(valid_runtime, + valid_runtime->period_size); + /* The same timer interrupt is used for playback and capture device */ + if ((running & (1 << SNDRV_PCM_STREAM_PLAYBACK)) && + (running & (1 << SNDRV_PCM_STREAM_CAPTURE))) { + copy_play_buf(dpcm_play, dpcm_capt, elapsed_bytes); + bytepos_finish(dpcm_play, elapsed_bytes); + bytepos_finish(dpcm_capt, elapsed_bytes); + } else if (running & (1 << SNDRV_PCM_STREAM_PLAYBACK)) { + bytepos_finish(dpcm_play, elapsed_bytes); + } else if (running & (1 << SNDRV_PCM_STREAM_CAPTURE)) { + clear_capture_buf(dpcm_capt, elapsed_bytes); + bytepos_finish(dpcm_capt, elapsed_bytes); + } + spin_unlock_irqrestore(&cable->lock, flags); + + if (running & (1 << SNDRV_PCM_STREAM_PLAYBACK)) + snd_pcm_period_elapsed(dpcm_play->substream); + if (running & (1 << SNDRV_PCM_STREAM_CAPTURE)) + snd_pcm_period_elapsed(dpcm_capt->substream); +} + +static void loopback_snd_timer_function(struct snd_timer_instance *timeri, + unsigned long resolution, + unsigned long ticks) +{ + struct loopback_cable *cable = timeri->callback_data; + + loopback_snd_timer_period_elapsed(cable, SNDRV_TIMER_EVENT_TICK, + resolution); +} + +static void loopback_snd_timer_tasklet(unsigned long arg) +{ + struct snd_timer_instance *timeri = (struct snd_timer_instance *)arg; + struct loopback_cable *cable = timeri->callback_data; + + loopback_snd_timer_period_elapsed(cable, SNDRV_TIMER_EVENT_MSTOP, 0); +} + +static void loopback_snd_timer_event(struct snd_timer_instance * const timeri, + const int event, + struct timespec * const tstamp, + const unsigned long resolution) +{ + /* Do not lock cable->lock here because timer->lock is already hold. + * There are other functions which first lock cable->lock and than + * timer->lock e.g. + * loopback_trigger() + * spin_lock(&cable->lock) + * loopback_snd_timer_start() + * snd_timer_start() + * spin_lock(&timer->lock) + * Therefore when using the oposit order of locks here it could result + * in a deadlock. + */ + + if (event == SNDRV_TIMER_EVENT_MSTOP) { + struct loopback_cable *cable = timeri->callback_data; + + /* sound card of the timer was stopped. Therefore there will not + * be any further timer callbacks. Due to this forward audio + * data from here if in draining state. When still in running + * state the streaming will be aborted by the usual timeout. It + * should not be aborted here because may be the timer sound + * card does only a recovery and the timer is back soon. + * This tasklet triggers loopback_snd_timer_tasklet() + */ + tasklet_schedule(&cable->snd_timer.event_tasklet); + } +} + static void loopback_jiffies_timer_dpcm_info(struct loopback_pcm *dpcm, struct snd_info_buffer *buffer) { @@ -603,6 +851,18 @@ static void loopback_jiffies_timer_dpcm_info(struct loopback_pcm *dpcm, snd_iprintf(buffer, " timer_expires:\t%lu\n", dpcm->timer.expires); }
+static void loopback_snd_timer_dpcm_info(struct loopback_pcm *dpcm, + struct snd_info_buffer *buffer) +{ + snd_iprintf(buffer, " sound timer:\thw:%d,%d,%d\n", + dpcm->cable->snd_timer.id.card, + dpcm->cable->snd_timer.id.device, + dpcm->cable->snd_timer.id.subdevice); + snd_iprintf(buffer, " owner:\t\t%s\n", + (dpcm->cable->snd_timer.owner == SNDRV_PCM_STREAM_CAPTURE) ? + "capture" : "playback"); +} + static snd_pcm_uframes_t loopback_pointer(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; @@ -721,6 +981,23 @@ static int rule_channels(struct snd_pcm_hw_params *params, return snd_interval_refine(hw_param_interval(params, rule->var), &t); }
+static int rule_period_bytes(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct loopback_pcm *dpcm = rule->private; + struct loopback_cable *cable = dpcm->cable; + struct snd_interval t; + + mutex_lock(&dpcm->loopback->cable_lock); + t.min = cable->hw.period_bytes_min; + t.max = cable->hw.period_bytes_max; + mutex_unlock(&dpcm->loopback->cable_lock); + t.openmin = 0; + t.openmax = 0; + t.integer = 0; + return snd_interval_refine(hw_param_interval(params, rule->var), &t); +} + static void free_cable(struct snd_pcm_substream *substream) { struct loopback *loopback = substream->private_data; @@ -765,6 +1042,112 @@ static struct loopback_ops loopback_jiffies_timer_ops = { .dpcm_info = loopback_jiffies_timer_dpcm_info, };
+static int loopback_timer_source_by_name(const char * const name, + int * const number) +{ + return kstrtoint(name, 10, number); +} + +static int loopback_snd_card_by_name(const char * const name) +{ + int number; + + if (loopback_timer_source_by_name(name, &number) >= 0) + return number; + + for (number = 0; number < ARRAY_SIZE(snd_cards); number++) { + const struct snd_card * const card = snd_cards[number]; + + if (card && strcmp(card->id, name) == 0) + return number; + } + + return -EINVAL; +} + +/* call in loopback->cable_lock */ +static int loopback_snd_timer_open(struct loopback_pcm *dpcm) +{ + int err = 0; + unsigned long flags; + struct snd_timer_id tid = { + .dev_class = SNDRV_TIMER_CLASS_PCM, + .dev_sclass = SNDRV_TIMER_SCLASS_APPLICATION, + .card = loopback_snd_card_by_name + (dpcm->loopback->timer_source_name), + .device = 0, + .subdevice = 0, + }; + struct snd_timer_instance *timer = NULL; + + spin_lock_irqsave(&dpcm->cable->lock, flags); + dpcm->cable->snd_timer.owner = dpcm->substream->stream; + dpcm->cable->snd_timer.id = tid; + + /* check if timer was already opened. It is only opened once + * per playback and capture subdevice (aka cable). + */ + if (dpcm->cable->snd_timer.instance) + goto unlock; + + /* snd_timer_close() and snd_timer_open() should not be called with + * locked spinlock because both functions can block on a mutex. The + * mutex loopback->cable_lock is kept locked. Therefore snd_timer_open() + * cannot be called a second time by the other device of the same cable. + * Therefore the following issue cannot happen: + * [proc1] Call loopback_timer_open() -> + * Unlock cable->lock for snd_timer_close/open() call + * [proc2] Call loopback_timer_open() -> snd_timer_open(), + * snd_timer_start() + * [proc1] Call snd_timer_open() and overwrite running timer + * instance + */ + spin_unlock_irqrestore(&dpcm->cable->lock, flags); + err = snd_timer_open(&timer, dpcm->loopback->card->id, + &dpcm->cable->snd_timer.id, + current->pid); + if (err < 0) { + pcm_err(dpcm->substream->pcm, "Opening sound timer of card %d failed with %d", + dpcm->cable->snd_timer.id.card, err); + return err; + } + spin_lock_irqsave(&dpcm->cable->lock, flags); + + /* The callback has to be called from another tasklet. If + * SNDRV_TIMER_IFLG_FAST is specified it will be called from the + * snd_pcm_period_elapsed() call of the selected sound card. + * snd_pcm_period_elapsed() helds snd_pcm_stream_lock_irqsave(). + * Due to our callback loopback_snd_timer_function() also calls + * snd_pcm_period_elapsed() which calls snd_pcm_stream_lock_irqsave(). + * This would end up in a dead lock. + */ + timer->flags |= SNDRV_TIMER_IFLG_AUTO; + timer->callback = loopback_snd_timer_function; + timer->callback_data = (void *)dpcm->cable; + timer->ccallback = loopback_snd_timer_event; + dpcm->cable->snd_timer.instance = timer; + + /* initialise a tasklet used for draining */ + tasklet_init(&dpcm->cable->snd_timer.event_tasklet, + loopback_snd_timer_tasklet, (unsigned long)timer); + +unlock: + spin_unlock_irqrestore(&dpcm->cable->lock, flags); + + return err; +} + +/* stop_sync() is not required for sound timer because it does not need to be + * restarted in loopback_prepare() on Xrun recovery + */ +static struct loopback_ops loopback_snd_timer_ops = { + .open = loopback_snd_timer_open, + .start = loopback_snd_timer_start, + .stop = loopback_snd_timer_stop, + .close_cable = loopback_snd_timer_close_cable, + .dpcm_info = loopback_snd_timer_dpcm_info, +}; + static int loopback_open(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; @@ -793,7 +1176,10 @@ static int loopback_open(struct snd_pcm_substream *substream) } spin_lock_init(&cable->lock); cable->hw = loopback_pcm_hardware; - cable->ops = &loopback_jiffies_timer_ops; + if (loopback->timer_source <= TIMER_SRC_JIFFIES) + cable->ops = &loopback_jiffies_timer_ops; + else + cable->ops = &loopback_snd_timer_ops; loopback->cables[substream->number][dev] = cable; } dpcm->cable = cable; @@ -829,6 +1215,19 @@ static int loopback_open(struct snd_pcm_substream *substream) if (err < 0) goto unlock;
+ /* In case of sound timer the period time of both devices of the same + * loop has to be the same. This rule only takes effect if a sound timer + * was chosen via the kernel parameter. + */ + if (loopback->timer_source > TIMER_SRC_JIFFIES) { + err = snd_pcm_hw_rule_add(runtime, 0, + SNDRV_PCM_HW_PARAM_PERIOD_BYTES, + rule_period_bytes, dpcm, + SNDRV_PCM_HW_PARAM_PERIOD_BYTES, -1); + if (err < 0) + goto unlock; + } + /* loopback_runtime_free() has not to be called if kfree(dpcm) was * already called here. Otherwise it will end up with a double free. */ @@ -1250,6 +1649,15 @@ static int loopback_probe(struct platform_device *devptr) pcm_substreams[dev] = MAX_PCM_SUBSTREAMS; loopback->card = card; + loopback->timer_source_name = timer_source[dev]; + /* If it was not a number a sound card name was specified. Therefore a + * the sound timer of this card should be used. The right card name will + * be converted in loopback_snd_timer_open() + */ + if (loopback_timer_source_by_name(loopback->timer_source_name, + &loopback->timer_source) < 0) + loopback->timer_source = 0; + mutex_init(&loopback->cable_lock);
err = loopback_pcm_new(loopback, 0, pcm_substreams[dev]);
From: Timo Wischer twischer@de.adit-jv.com
snd_pcm_link() can be called by the user as long as the device is not yet started. Therefore currently a driver which wants to iterate over the linked substreams has to do this at the start trigger. But the start trigger should not block for a long time. Therefore there is no callback which can be used to iterate over the linked substreams without delaying the start trigger. This patch introduces a new callback function which will be called after the linked substream list was updated by snd_pcm_link(). This callback function is allowed to block for a longer time without interfering the synchronized start up of linked substreams.
Signed-off-by: Timo Wischer twischer@de.adit-jv.com --- include/sound/pcm.h | 1 + sound/core/pcm_native.c | 29 +++++++++++++++++++++++++++++ 2 files changed, 30 insertions(+)
diff --git a/include/sound/pcm.h b/include/sound/pcm.h index 18bd8c3..a7e5dd2 100644 --- a/include/sound/pcm.h +++ b/include/sound/pcm.h @@ -90,6 +90,7 @@ struct snd_pcm_ops { unsigned long offset); int (*mmap)(struct snd_pcm_substream *substream, struct vm_area_struct *vma); int (*ack)(struct snd_pcm_substream *substream); + int (*link_changed)(struct snd_pcm_substream *substream); };
/* diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index f731f90..57a8a66 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -1981,6 +1981,27 @@ static bool is_pcm_file(struct file *file) /* * PCM link handling */ +/* Note: call with snd_pcm_link_rwsem locked */ +static int snd_pcm_link_changed(struct snd_pcm_substream * const substream) +{ + struct snd_pcm_substream *s; + + /* snd_pcm_link_rwsem is down whenever the link_list is changed. + * Therefore this lock is sufficent for the iteration. + */ + snd_pcm_group_for_each_entry(s, substream) { + int err; + + if (!s->ops->link_changed) + continue; + err = s->ops->link_changed(s); + if (err < 0) + return err; + } + + return 0; +} + static int snd_pcm_link(struct snd_pcm_substream *substream, int fd) { int res = 0; @@ -2030,6 +2051,9 @@ static int snd_pcm_link(struct snd_pcm_substream *substream, int fd) snd_pcm_group_assign(substream1, target_group); snd_pcm_stream_unlock(substream1); snd_pcm_group_unlock_irq(target_group, nonatomic); + + if (res >= 0) + res = snd_pcm_link_changed(substream); _end: up_write(&snd_pcm_link_rwsem); _nolock: @@ -2076,6 +2100,11 @@ static int snd_pcm_unlink(struct snd_pcm_substream *substream) snd_pcm_group_unlock_irq(group, nonatomic); if (do_free) kfree(group); + if (res >= 0) + res = snd_pcm_link_changed(substream); + /* Also signal substream which was removed */ + if (res >= 0 && substream->ops->link_changed) + res = substream->ops->link_changed(substream);
_end: up_write(&snd_pcm_link_rwsem);
From: Timo Wischer twischer@de.adit-jv.com
If there is a hardware sound card linked to the loopback device the sound timer of the hardware sound card will be used for this loopback device. Such a link will be created when snd_pcm_link() was called. Linked dummy and loopback devices will be ignored.
This feature can be enabled when loading the module with the following command: $ modprobe snd_aloop enable=1 timer_source=-1
Signed-off-by: Timo Wischer twischer@de.adit-jv.com --- sound/drivers/aloop.c | 187 ++++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 172 insertions(+), 15 deletions(-)
diff --git a/sound/drivers/aloop.c b/sound/drivers/aloop.c index a411aeb..e2f1d64 100644 --- a/sound/drivers/aloop.c +++ b/sound/drivers/aloop.c @@ -51,7 +51,8 @@ MODULE_LICENSE("GPL"); MODULE_SUPPORTED_DEVICE("{{ALSA,Loopback soundcard}}");
#define MAX_PCM_SUBSTREAMS 8 -#define TIMER_SRC_JIFFIES -1 +#define TIMER_SRC_JIFFIES -2 +#define TIMER_SRC_AUTODETECT -1
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */ @@ -76,7 +77,7 @@ MODULE_PARM_DESC(pcm_notify, "Break capture when PCM format/rate/channels change * sound timer is not supported. */ module_param_array(timer_source, charp, NULL, 0444); -MODULE_PARM_DESC(timer_source, "Sound card number of timer to be used (>=0). -2 jiffies timer [default]."); +MODULE_PARM_DESC(timer_source, "Sound card number of timer to be used (>=0). -2 jiffies timer [default]. -1 auto detect sound timer.");
#define NO_PITCH 100000
@@ -252,6 +253,14 @@ static int loopback_snd_timer_start(struct loopback_pcm *dpcm) { int err;
+ /* only in auto detect mode the sound timer will not be opened when the + * device was opened. It will be opened on the first snd_pcm_link() call + */ + if (!dpcm->cable->snd_timer.instance) { + pcm_err(dpcm->substream->pcm, "Sound timer not auto detected. At least one application of the same loopback cable has to call snd_pcm_link() to detect the sound timer."); + return -EINVAL; + } + /* Loopback device has to use same period as timer card. Therefore * wake up for each snd_pcm_period_elapsed() call of timer card. */ @@ -286,6 +295,10 @@ static int loopback_snd_timer_stop(struct loopback_pcm *dpcm) { int err;
+ /* no need to stop the timer if it was not yet opened */ + if (!dpcm->cable->snd_timer.instance) + return 0; + /* only stop if both devices (playback and capture) are not running */ if (dpcm->cable->running) return 0; @@ -307,10 +320,15 @@ static inline int loopback_jiffies_timer_stop_sync(struct loopback_pcm *dpcm) }
/* call in loopback->cable_lock */ -static int loopback_snd_timer_close_cable(struct loopback_pcm *dpcm) +static int loopback_snd_timer_close(struct loopback_pcm *dpcm, + struct snd_timer_instance * const timer) { int err;
+ /* no need to close the timer if it was not yet opened */ + if (!timer) + return 0; + /* wait till drain tasklet has finished if requested */ tasklet_kill(&dpcm->cable->snd_timer.event_tasklet);
@@ -319,7 +337,7 @@ static int loopback_snd_timer_close_cable(struct loopback_pcm *dpcm) * loopback->cable_lock is locked. Therefore no need to lock * cable->lock; */ - err = snd_timer_close(dpcm->cable->snd_timer.instance); + err = snd_timer_close(timer); if (err < 0) { pcm_err(dpcm->substream->pcm, "snd_timer_close(card %d) = %d", dpcm->cable->snd_timer.id.card, err); @@ -329,6 +347,12 @@ static int loopback_snd_timer_close_cable(struct loopback_pcm *dpcm) return err; }
+/* call in loopback->cable_lock */ +static int loopback_snd_timer_close_cable(struct loopback_pcm *dpcm) +{ + return loopback_snd_timer_close(dpcm, dpcm->cable->snd_timer.instance); +} + static int loopback_check_format(struct loopback_cable *cable, int stream) { struct snd_pcm_runtime *runtime, *cruntime; @@ -1065,11 +1089,11 @@ static int loopback_snd_card_by_name(const char * const name) return -EINVAL; }
-/* call in loopback->cable_lock */ -static int loopback_snd_timer_open(struct loopback_pcm *dpcm) +/* call in cable->lock */ +static int loopback_snd_timer_source_update(struct loopback_pcm *dpcm) { - int err = 0; - unsigned long flags; + int changed = 0; + struct snd_pcm_substream *s; struct snd_timer_id tid = { .dev_class = SNDRV_TIMER_CLASS_PCM, .dev_sclass = SNDRV_TIMER_SCLASS_APPLICATION, @@ -1078,18 +1102,109 @@ static int loopback_snd_timer_open(struct loopback_pcm *dpcm) .device = 0, .subdevice = 0, }; - struct snd_timer_instance *timer = NULL;
- spin_lock_irqsave(&dpcm->cable->lock, flags); + /* Enforce kernel module parameter if not auto detect */ + if (tid.card != TIMER_SRC_AUTODETECT) { + dpcm->cable->snd_timer.owner = dpcm->substream->stream; + dpcm->cable->snd_timer.id = tid; + return 0; + } + + /* find the first HW device which is linked to this loop device */ + snd_pcm_group_for_each_entry(s, dpcm->substream) { + /* ignore all linked devices also using jiffies timer */ + if (strcmp(s->pcm->card->driver, "Loopback") == 0) + continue; + if (strcmp(s->pcm->card->driver, "Dummy") == 0) + continue; + + tid.card = s->pcm->card->number; + tid.device = s->pcm->device; + tid.subdevice = s->number; + break; + } + + /* check if a sound timer could already be detected */ + if (tid.card < 0) + return -ENODEV; + + /* check if timer source has changed */ + changed = (dpcm->cable->snd_timer.id.card != tid.card || + dpcm->cable->snd_timer.id.device != tid.device || + dpcm->cable->snd_timer.id.subdevice != tid.subdevice); + /* Do not change anything if we are the second device + * which calls snd_pcm_link() + */ + if (changed) { + if (dpcm->cable->snd_timer.owner > 0 && + dpcm->cable->snd_timer.owner != dpcm->substream->stream) { + pcm_warn(dpcm->substream->pcm, "Both devices of the same loopback cable are requesting different sound timers. May be the wrong one is used. (used hw:%d,%d,%d reqested hw:%d,%d,%d)", + dpcm->cable->snd_timer.id.card, + dpcm->cable->snd_timer.id.device, + dpcm->cable->snd_timer.id.subdevice, tid.card, + tid.device, tid.subdevice); + return 0; + } else if (dpcm->cable->running) { + pcm_warn(dpcm->substream->pcm, "Another sound timer was requested but at least one device is already running. May be the wrong one is used. (used hw:%d,%d,%d reqested hw:%d,%d,%d)", + dpcm->cable->snd_timer.id.card, + dpcm->cable->snd_timer.id.device, + dpcm->cable->snd_timer.id.subdevice, tid.card, + tid.device, tid.subdevice); + return 0; + } + } + + /* always return a valid timer id with defined classes. Also in case + * when it looks like card has not changed because hw:0,0,0 should be + * used + */ dpcm->cable->snd_timer.owner = dpcm->substream->stream; dpcm->cable->snd_timer.id = tid;
- /* check if timer was already opened. It is only opened once - * per playback and capture subdevice (aka cable). + return changed; +} + +/* call in loopback->cable_lock */ +static int loopback_snd_timer_open(struct loopback_pcm *dpcm) +{ + int err = 0; + unsigned long flags; + struct snd_timer_instance *timer = NULL; + + spin_lock_irqsave(&dpcm->cable->lock, flags); + err = loopback_snd_timer_source_update(dpcm); + if (err < 0) { + /* Could not yet detect the right sound timer because no valid + * snd_pcm_link() exists. This should not be handled as an error + * because the right timer will be opened with the call to + * snd_pcm_link(). + */ + if (err == -ENODEV) + err = 0; + goto unlock; + } + /* do not reopen the timer if it is already opened and nothing has + * changed */ - if (dpcm->cable->snd_timer.instance) + if (dpcm->cable->snd_timer.instance && err < 1) goto unlock;
+ /* Avoids that any function accesses an invalid timer instance when + * reopening the sound timer. Reopening the sound timer is only + * supported in TIMER_SRC_AUTODETECT mode. snd_pcm_start() will fail on + * the second device when the first device currently reopens the_timer: + * [proc1] Calls snd_pcm_link() -> loopback_timer_open() -> + * Unlock cable->lock for snd_timer_close/open() call + * [proc2] Calls snd_pcm_start() when timer reopening is in progress + * But this is fine because snd_pcm_start() would also fail if + * snd_pcm_link() was not called from any device of the same cable in + * TIMER_SRC_AUTODETECT mode. Therefore the user has to guarantee in + * TIMER_SRC_AUTODETECT mode that snd_pcm_link() is called before anyone + * calls snd_pcm_start() of the same cable. + */ + timer = dpcm->cable->snd_timer.instance; + dpcm->cable->snd_timer.instance = NULL; + /* snd_timer_close() and snd_timer_open() should not be called with * locked spinlock because both functions can block on a mutex. The * mutex loopback->cable_lock is kept locked. Therefore snd_timer_open() @@ -1103,6 +1218,10 @@ static int loopback_snd_timer_open(struct loopback_pcm *dpcm) * instance */ spin_unlock_irqrestore(&dpcm->cable->lock, flags); + /* close timer if there is already something open */ + err = loopback_snd_timer_close(dpcm, timer); + if (err < 0) + return err; err = snd_timer_open(&timer, dpcm->loopback->card->id, &dpcm->cable->snd_timer.id, current->pid); @@ -1137,6 +1256,19 @@ static int loopback_snd_timer_open(struct loopback_pcm *dpcm) return err; }
+static int loopback_snd_timer_link_changed(struct snd_pcm_substream *substream) +{ + int err; + struct loopback_pcm *dpcm = substream->runtime->private_data; + + mutex_lock(&dpcm->loopback->cable_lock); + /* Try to reopen the timer here if the link_list has changed. */ + err = loopback_snd_timer_open(dpcm); + mutex_unlock(&dpcm->loopback->cable_lock); + + return err; +} + /* stop_sync() is not required for sound timer because it does not need to be * restarted in loopback_prepare() on Xrun recovery */ @@ -1148,6 +1280,13 @@ static struct loopback_ops loopback_snd_timer_ops = { .dpcm_info = loopback_snd_timer_dpcm_info, };
+static struct loopback_ops loopback_snd_timer_auto_ops = { + .start = loopback_snd_timer_start, + .stop = loopback_snd_timer_stop, + .close_cable = loopback_snd_timer_close_cable, + .dpcm_info = loopback_snd_timer_dpcm_info, +}; + static int loopback_open(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; @@ -1178,6 +1317,8 @@ static int loopback_open(struct snd_pcm_substream *substream) cable->hw = loopback_pcm_hardware; if (loopback->timer_source <= TIMER_SRC_JIFFIES) cable->ops = &loopback_jiffies_timer_ops; + else if (loopback->timer_source == TIMER_SRC_AUTODETECT) + cable->ops = &loopback_snd_timer_auto_ops; else cable->ops = &loopback_snd_timer_ops; loopback->cables[substream->number][dev] = cable; @@ -1276,18 +1417,34 @@ static const struct snd_pcm_ops loopback_pcm_ops = { .page = snd_pcm_lib_get_vmalloc_page, };
+static const struct snd_pcm_ops loopback_pcm_auto_ops = { + .open = loopback_open, + .close = loopback_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = loopback_hw_params, + .hw_free = loopback_hw_free, + .prepare = loopback_prepare, + .trigger = loopback_trigger, + .pointer = loopback_pointer, + .page = snd_pcm_lib_get_vmalloc_page, + .link_changed = loopback_snd_timer_link_changed, +}; + static int loopback_pcm_new(struct loopback *loopback, int device, int substreams) { struct snd_pcm *pcm; int err; + const struct snd_pcm_ops * const ops = + (loopback->timer_source == TIMER_SRC_AUTODETECT) ? + &loopback_pcm_auto_ops : &loopback_pcm_ops;
err = snd_pcm_new(loopback->card, "Loopback PCM", device, substreams, substreams, &pcm); if (err < 0) return err; - snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &loopback_pcm_ops); - snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &loopback_pcm_ops); + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, ops); + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, ops);
pcm->private_data = loopback; pcm->info_flags = 0;
On Tue, 26 Mar 2019 08:49:33 +0100, twischer@de.adit-jv.com wrote:
From: Timo Wischer twischer@de.adit-jv.com
snd_pcm_link() can be called by the user as long as the device is not yet started. Therefore currently a driver which wants to iterate over the linked substreams has to do this at the start trigger. But the start trigger should not block for a long time. Therefore there is no callback which can be used to iterate over the linked substreams without delaying the start trigger. This patch introduces a new callback function which will be called after the linked substream list was updated by snd_pcm_link(). This callback function is allowed to block for a longer time without interfering the synchronized start up of linked substreams.
Signed-off-by: Timo Wischer twischer@de.adit-jv.com
Well, the idea appears interesting, but I'm afraid that the implementation is still racy. The place you're calling the new callback isn't protected, hence the stream can be triggered while calling it. That is, even during operating your loopback link_changed callback, another thread is able to start the stream.
thanks,
Takashi
On 3/26/19 09:35, Takashi Iwai wrote:
On Tue, 26 Mar 2019 08:49:33 +0100, twischer@de.adit-jv.com wrote:
From: Timo Wischer twischer@de.adit-jv.com
snd_pcm_link() can be called by the user as long as the device is not yet started. Therefore currently a driver which wants to iterate over the linked substreams has to do this at the start trigger. But the start trigger should not block for a long time. Therefore there is no callback which can be used to iterate over the linked substreams without delaying the start trigger. This patch introduces a new callback function which will be called after the linked substream list was updated by snd_pcm_link(). This callback function is allowed to block for a longer time without interfering the synchronized start up of linked substreams.
Signed-off-by: Timo Wischer twischer@de.adit-jv.com
Well, the idea appears interesting, but I'm afraid that the implementation is still racy. The place you're calling the new callback isn't protected, hence the stream can be triggered while calling it. That is, even during operating your loopback link_changed callback, another thread is able to start the stream.
Hi Takashi,
As far as I got you mean the following scenario:
* snd_pcm_link() is called for a HW sound card o loopback_snd_timer_link_changed() o loopback_snd_timer_open() o spin_lock_irqsave(&dpcm->cable->lock, flags); * snd_pcm_start() called for aloop sound card o loopback_trigger() o spin_lock(&cable->lock) -> has to wait till loopback_snd_timer_open() calls spin_unlock_irqrestore()
So far snd_pcm_start() has to wait for loopback_snd_timer_open().
* loopback_snd_timer_open() will continue with o dpcm->cable->snd_timer.instance = NULL; o spin_unlock_irqrestore() * loopback_trigger() can enter the lock o loopback_snd_timer_start() will fail with -EINVAL due to (loopback_trigger == NULL)
At least this will not result into memory corruption due to race or any other wired behavior. But my expectation is that snd_pcm_link(hw, aloop) or snd_pcm_link(aloop, hw) is only called by the application calling snd_pcm_start(aloop) because the same aloop device cannot be opened by multiple applications at the same time.
Do you see an use case where one application would call snd_pcm_start() in parallel with snd_pcm_link() (somehow configuring the device)? May be we should add an additional synchronization mechanism in pcm_native.c to avoid call of snd_pcm_link() in parallel with snd_pcm_start().
thanks,
Takashi
participants (1)
-
Takashi Iwai
-
Timo Wischer
-
twischer@de.adit-jv.com