Fix setting SDnFMT based on High Definition Audio Specification Rev. 1.0a page 48. Bits per Sample (BITS): 000 = 8 bits. The data will be packed in memory in 8-bit containers on 16-bit boundaries. 001 = 16 bits. The data will be packed in memory in 16-bit containers on 16-bit boundaries. 010 = 20 bits. The data will be packed in memory in 32-bit containers on 32-bit boundaries. 011 = 24 bits. The data will be packed in memory in 32-bit containers on 32-bit boundaries. 100 = 32 bits. The data will be packed in memory in 32-bit containers on 32-bit boundaries. 101-111 = Reserved Set SDnFMT depending on which format was given, as maxbps only describes container size. Henceforth split cases for formats 20, 24, 32 bits. For format SNDRV_PCM_FORMAT_FLOAT_LE width is equal 32 so as previously it will end up with mask for 32 bits. Signed-off-by: Pawel Harlozinski <pawel.harlozinski@linux.intel.com> --- sound/hda/hdac_device.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/sound/hda/hdac_device.c b/sound/hda/hdac_device.c index 333220f0f8af..2ccf79866f99 100644 --- a/sound/hda/hdac_device.c +++ b/sound/hda/hdac_device.c @@ -762,14 +762,13 @@ unsigned int snd_hdac_calc_stream_format(unsigned int rate, val |= AC_FMT_BITS_16; break; case 20: + val |= AC_FMT_BITS_20; + break; case 24: + val |= AC_FMT_BITS_24; + break; case 32: - if (maxbps >= 32 || format == SNDRV_PCM_FORMAT_FLOAT_LE) - val |= AC_FMT_BITS_32; - else if (maxbps >= 24) - val |= AC_FMT_BITS_24; - else - val |= AC_FMT_BITS_20; + val |= AC_FMT_BITS_32; break; default: return 0; -- 2.17.1