When DSP boots with timeout error, reinitialize, transfer and boot firmware to recover audio. Signed-off-by: Szymon Mielczarek <szymonx.mielczarek@intel.com> --- sound/soc/intel/skylake/bxt-sst.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c index 440bca7afbf1..a2844bdca1b8 100644 --- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -455,13 +455,18 @@ static int bxt_set_dsp_D0(struct sst_dsp *ctx, unsigned int core_id) /* If core 1 was turned on for booting core 0, turn it off */ skl_dsp_core_power_down(ctx, SKL_DSP_CORE_MASK(1)); if (ret == 0) { - dev_err(ctx->dev, "%s: DSP boot timeout\n", __func__); - dev_err(ctx->dev, "Error code=0x%x: FW status=0x%x\n", + dev_warn(ctx->dev, + "DSP boot timeout: Error code=0x%x: FW status=0x%x\n", sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE), sst_dsp_shim_read(ctx, BXT_ADSP_FW_STATUS)); - dev_err(ctx->dev, "Failed to set core0 to D0 state\n"); - ret = -EIO; - goto err; + + ret = bxt_sst_init_fw(skl->dev, skl); + dev_warn(ctx->dev, "Reload fw status: %d\n", ret); + if (ret < 0) { + dev_err(ctx->dev, "Failed to set core0 to D0 state\n"); + ret = -EIO; + goto err; + } } } -- 2.17.1