When DSP boots with timeout error try to reload firmware to keep best user expeirience. Signed-off-by: Szymon Mielczarek <szymonx.mielczarek@intel.com> Signed-off-by: Pawel Harlozinski <pawel.harlozinski@linux.intel.com> --- sound/soc/intel/skylake/bxt-sst.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c index 440bca7afbf1..dd0260557530 100644 --- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -455,13 +455,19 @@ static int bxt_set_dsp_D0(struct sst_dsp *ctx, unsigned int core_id) /* If core 1 was turned on for booting core 0, turn it off */ skl_dsp_core_power_down(ctx, SKL_DSP_CORE_MASK(1)); if (ret == 0) { - dev_err(ctx->dev, "%s: DSP boot timeout\n", __func__); - dev_err(ctx->dev, "Error code=0x%x: FW status=0x%x\n", + dev_warn(ctx->dev, + "DSP boot timeout: Error code=0x%x: FW status=0x%x\n", sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE), sst_dsp_shim_read(ctx, BXT_ADSP_FW_STATUS)); - dev_err(ctx->dev, "Failed to set core0 to D0 state\n"); - ret = -EIO; - goto err; + dev_warn(ctx->dev,"Reloading FW\n"); + + ret = bxt_sst_init_fw(skl->dev, skl); + if (ret < 0) { + dev_err(ctx->dev, "Reload fw failed: %d\n", ret); + dev_err(ctx->dev, "Failed to set core0 to D0 state\n"); + ret = -EIO; + goto err; + } } } @@ -486,7 +492,6 @@ static int bxt_set_dsp_D0(struct sst_dsp *ctx, unsigned int core_id) if (core_id == SKL_DSP_CORE0_ID) core_mask |= SKL_DSP_CORE_MASK(1); skl_dsp_disable_core(ctx, core_mask); - return ret; } -- 2.17.1