[alsa-devel] [PATCH 1/4] ASoC: dapm: Add new widgets to the end of the widget list
Currently new widgets are appended to the beginning of the cards widget list. This has the effect that widgets that are created while iterating over the widget list in snd_soc_dapm_new_widgets() (like e.g. the auto-disable widgets) are not covered during that invocation of the function. If no further invocations of snd_soc_dapm_new_widgets() happen these widgets will not be fully initialized and e.g. no debugfs entries are created for them.
By adding new widgets to the end of the widget list we make sure that widgets that are created in snd_soc_dapm_new_widgets() will still be handled during the same snd_soc_dapm_new_widgets() invocation and are always fully initialized.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- This series depends on Charles' mux auto-disable series. --- sound/soc/soc-dapm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 79e6cf4..5c159f4 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -3252,7 +3252,7 @@ snd_soc_dapm_new_control(struct snd_soc_dapm_context *dapm, INIT_LIST_HEAD(&w->sinks); INIT_LIST_HEAD(&w->list); INIT_LIST_HEAD(&w->dirty); - list_add(&w->list, &dapm->card->widgets); + list_add_tail(&w->list, &dapm->card->widgets);
w->inputs = -1; w->outputs = -1;
A demux is conceptually similar to a mux. Where a mux has multiple input and one output and selects one of the inputs to be connected to the output, the demux has one input and multiple outputs and selects one of the outputs to which the input gets connected.
This similarity makes it straight forward to support them in DAPM using the existing mux support, we only need to swap sinks and sources when initially setting up the paths.
The only slightly tricky part is that there can only be one control per path. Since mixers/muxes are at the sink of a path and a demux is at the source and both types want a control it is not possible to directly connect a demux output to a mixer/mux input. The patch adds some sanity checks to make sure that this does not happen.
Drivers who want to model hardware which directly connects a demux output to a mixer/mux input can do this by inserting a dummy widget between the two. E.g.:
{ "Dummy", "Demux Control", "Demux" }, { "Mixer", "Mixer Control", "Dummy" },
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- include/sound/soc-dapm.h | 5 +++ sound/soc/soc-dapm.c | 112 ++++++++++++++++++++++++++++++++++++++++------- 2 files changed, 102 insertions(+), 15 deletions(-)
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index b659d9f..bfc415e 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -107,6 +107,10 @@ struct device; { .id = snd_soc_dapm_mux, .name = wname, \ SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ .kcontrol_news = wcontrols, .num_kcontrols = 1} +#define SND_SOC_DAPM_DEMUX(wname, wreg, wshift, winvert, wcontrols) \ +{ .id = snd_soc_dapm_demux, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ + .kcontrol_news = wcontrols, .num_kcontrols = 1}
/* Simplified versions of above macros, assuming wncontrols = ARRAY_SIZE(wcontrols) */ #define SOC_PGA_ARRAY(wname, wreg, wshift, winvert,\ @@ -452,6 +456,7 @@ enum snd_soc_dapm_type { snd_soc_dapm_input = 0, /* input pin */ snd_soc_dapm_output, /* output pin */ snd_soc_dapm_mux, /* selects 1 analog signal from many inputs */ + snd_soc_dapm_demux, /* connects the input to one of multiple outputs */ snd_soc_dapm_mixer, /* mixes several analog signals together */ snd_soc_dapm_mixer_named_ctl, /* mixer with named controls */ snd_soc_dapm_pga, /* programmable gain/attenuation (volume) */ diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 5c159f4..a2e5f22 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -70,6 +70,7 @@ static int dapm_up_seq[] = { [snd_soc_dapm_aif_out] = 4, [snd_soc_dapm_mic] = 5, [snd_soc_dapm_mux] = 6, + [snd_soc_dapm_demux] = 6, [snd_soc_dapm_dac] = 7, [snd_soc_dapm_switch] = 8, [snd_soc_dapm_mixer] = 8, @@ -100,6 +101,7 @@ static int dapm_down_seq[] = { [snd_soc_dapm_mic] = 7, [snd_soc_dapm_micbias] = 8, [snd_soc_dapm_mux] = 9, + [snd_soc_dapm_demux] = 9, [snd_soc_dapm_aif_in] = 10, [snd_soc_dapm_aif_out] = 10, [snd_soc_dapm_dai_in] = 10, @@ -356,6 +358,7 @@ static int dapm_kcontrol_data_alloc(struct snd_soc_dapm_widget *widget, } } break; + case snd_soc_dapm_demux: case snd_soc_dapm_mux: e = (struct soc_enum *)kcontrol->private_value;
@@ -639,9 +642,10 @@ out:
/* connect mux widget to its interconnecting audio paths */ static int dapm_connect_mux(struct snd_soc_dapm_context *dapm, - struct snd_soc_dapm_path *path, const char *control_name) + struct snd_soc_dapm_path *path, const char *control_name, + struct snd_soc_dapm_widget *w) { - const struct snd_kcontrol_new *kcontrol = &path->sink->kcontrol_news[0]; + const struct snd_kcontrol_new *kcontrol = &w->kcontrol_news[0]; struct soc_enum *e = (struct soc_enum *)kcontrol->private_value; unsigned int val, item; int i; @@ -781,6 +785,7 @@ static int dapm_create_or_share_mixmux_kcontrol(struct snd_soc_dapm_widget *w, wname_in_long_name = false; kcname_in_long_name = true; break; + case snd_soc_dapm_demux: case snd_soc_dapm_mux: wname_in_long_name = true; kcname_in_long_name = false; @@ -886,17 +891,32 @@ static int dapm_new_mux(struct snd_soc_dapm_widget *w) { struct snd_soc_dapm_context *dapm = w->dapm; struct snd_soc_dapm_path *path; + struct list_head *paths; + const char *type; int ret;
+ switch (w->id) { + case snd_soc_dapm_mux: + paths = &w->sources; + type = "mux"; + break; + case snd_soc_dapm_demux: + paths = &w->sinks; + type = "demux"; + break; + default: + return -EINVAL; + } + if (w->num_kcontrols != 1) { dev_err(dapm->dev, - "ASoC: mux %s has incorrect number of controls\n", + "ASoC: %s %s has incorrect number of controls\n", type, w->name); return -EINVAL; }
- if (list_empty(&w->sources)) { - dev_err(dapm->dev, "ASoC: mux %s has no paths\n", w->name); + if (list_empty(paths)) { + dev_err(dapm->dev, "ASoC: %s %s has no paths\n", type, w->name); return -EINVAL; }
@@ -904,9 +924,16 @@ static int dapm_new_mux(struct snd_soc_dapm_widget *w) if (ret < 0) return ret;
- list_for_each_entry(path, &w->sources, list_sink) { - if (path->name) - dapm_kcontrol_add_path(w->kcontrols[0], path); + if (w->id == snd_soc_dapm_mux) { + list_for_each_entry(path, &w->sources, list_sink) { + if (path->name) + dapm_kcontrol_add_path(w->kcontrols[0], path); + } + } else { + list_for_each_entry(path, &w->sinks, list_source) { + if (path->name) + dapm_kcontrol_add_path(w->kcontrols[0], path); + } }
return 0; @@ -2414,6 +2441,50 @@ static void dapm_update_widget_flags(struct snd_soc_dapm_widget *w) } }
+static int snd_soc_dapm_check_dynamic_path(struct snd_soc_dapm_context *dapm, + struct snd_soc_dapm_widget *source, struct snd_soc_dapm_widget *sink, + const char *control) +{ + bool dynamic_source = false; + bool dynamic_sink = false; + + if (!control) + return 0; + + switch (source->id) { + case snd_soc_dapm_demux: + dynamic_source = true; + break; + default: + break; + } + + switch (sink->id) { + case snd_soc_dapm_mux: + case snd_soc_dapm_switch: + case snd_soc_dapm_mixer: + case snd_soc_dapm_mixer_named_ctl: + dynamic_sink = true; + break; + default: + break; + } + + if (dynamic_source && dynamic_sink) { + dev_err(dapm->dev, + "Direct connection between demux and mixer/mux not supported for path %s -> [%s] -> %s\n", + source->name, control, sink->name); + return -EINVAL; + } else if (!dynamic_source && !dynamic_sink) { + dev_err(dapm->dev, + "Control not supported for path %s -> [%s] -> %s\n", + source->name, control, sink->name); + return -EINVAL; + } + + return 0; +} + static int snd_soc_dapm_add_path(struct snd_soc_dapm_context *dapm, struct snd_soc_dapm_widget *wsource, struct snd_soc_dapm_widget *wsink, const char *control, @@ -2444,6 +2515,10 @@ static int snd_soc_dapm_add_path(struct snd_soc_dapm_context *dapm, return -EINVAL; }
+ ret = snd_soc_dapm_check_dynamic_path(dapm, wsource, wsink, control); + if (ret) + return ret; + path = kzalloc(sizeof(struct snd_soc_dapm_path), GFP_KERNEL); if (!path) return -ENOMEM; @@ -2463,10 +2538,19 @@ static int snd_soc_dapm_add_path(struct snd_soc_dapm_context *dapm, if (control == NULL) { path->connect = 1; } else { - /* connect dynamic paths */ + switch (wsource->id) { + case snd_soc_dapm_demux: + ret = dapm_connect_mux(dapm, path, control, wsource); + if (ret) + goto err; + break; + default: + break; + } + switch (wsink->id) { case snd_soc_dapm_mux: - ret = dapm_connect_mux(dapm, path, control); + ret = dapm_connect_mux(dapm, path, control, wsink); if (ret != 0) goto err; break; @@ -2478,11 +2562,7 @@ static int snd_soc_dapm_add_path(struct snd_soc_dapm_context *dapm, goto err; break; default: - dev_err(dapm->dev, - "Control not supported for path %s -> [%s] -> %s\n", - wsource->name, control, wsink->name); - ret = -EINVAL; - goto err; + break; } }
@@ -2815,6 +2895,7 @@ int snd_soc_dapm_new_widgets(struct snd_soc_card *card) dapm_new_mixer(w); break; case snd_soc_dapm_mux: + case snd_soc_dapm_demux: dapm_new_mux(w); break; case snd_soc_dapm_pga: @@ -3219,6 +3300,7 @@ snd_soc_dapm_new_control(struct snd_soc_dapm_context *dapm, w->power_check = dapm_always_on_check_power; break; case snd_soc_dapm_mux: + case snd_soc_dapm_demux: case snd_soc_dapm_switch: case snd_soc_dapm_mixer: case snd_soc_dapm_mixer_named_ctl:
Use a DAPM auto-disable demux to model the Mode control which affects the routing of the input pin to the output pins. This allows us to remove the custom code for handling the Mode control.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/codecs/lm4857.c | 100 ++++++++++++---------------------------------- 1 file changed, 26 insertions(+), 74 deletions(-)
diff --git a/sound/soc/codecs/lm4857.c b/sound/soc/codecs/lm4857.c index 79ad4cb..dac9165 100644 --- a/sound/soc/codecs/lm4857.c +++ b/sound/soc/codecs/lm4857.c @@ -23,11 +23,6 @@ #include <sound/soc.h> #include <sound/tlv.h>
-struct lm4857 { - struct regmap *regmap; - uint8_t mode; -}; - static const struct reg_default lm4857_default_regs[] = { { 0x0, 0x00 }, { 0x1, 0x00 }, @@ -46,64 +41,33 @@ static const struct reg_default lm4857_default_regs[] = { #define LM4857_WAKEUP 5 #define LM4857_EPGAIN 4
-static int lm4857_get_mode(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); - struct lm4857 *lm4857 = snd_soc_codec_get_drvdata(codec); - - ucontrol->value.integer.value[0] = lm4857->mode; - - return 0; -} - -static int lm4857_set_mode(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) -{ - struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); - struct lm4857 *lm4857 = snd_soc_codec_get_drvdata(codec); - uint8_t value = ucontrol->value.integer.value[0]; - - lm4857->mode = value; - - if (codec->dapm.bias_level == SND_SOC_BIAS_ON) - regmap_update_bits(lm4857->regmap, LM4857_CTRL, 0x0F, value + 6); - - return 1; -} - -static int lm4857_set_bias_level(struct snd_soc_codec *codec, - enum snd_soc_bias_level level) -{ - struct lm4857 *lm4857 = snd_soc_codec_get_drvdata(codec); - - switch (level) { - case SND_SOC_BIAS_ON: - regmap_update_bits(lm4857->regmap, LM4857_CTRL, 0x0F, - lm4857->mode + 6); - break; - case SND_SOC_BIAS_STANDBY: - regmap_update_bits(lm4857->regmap, LM4857_CTRL, 0x0F, 0); - break; - default: - break; - } - - return 0; -} +static const unsigned int lm4857_mode_values[] = { + 0, + 6, + 7, + 8, + 9, +};
-static const char *lm4857_mode[] = { +static const char * const lm4857_mode_texts[] = { + "Off", "Earpiece", "Loudspeaker", "Loudspeaker + Headphone", "Headphone", };
-static SOC_ENUM_SINGLE_EXT_DECL(lm4857_mode_enum, lm4857_mode); +static SOC_VALUE_ENUM_SINGLE_AUTODISABLE_DECL(lm4857_mode_enum, + LM4857_CTRL, 0, 0xf, lm4857_mode_texts, lm4857_mode_values); + +static const struct snd_kcontrol_new lm4857_mode_ctrl = + SOC_DAPM_ENUM("Mode", lm4857_mode_enum);
static const struct snd_soc_dapm_widget lm4857_dapm_widgets[] = { SND_SOC_DAPM_INPUT("IN"),
+ SND_SOC_DAPM_DEMUX("Mode", SND_SOC_NOPM, 0, 0, &lm4857_mode_ctrl), + SND_SOC_DAPM_OUTPUT("LS"), SND_SOC_DAPM_OUTPUT("HP"), SND_SOC_DAPM_OUTPUT("EP"), @@ -125,24 +89,18 @@ static const struct snd_kcontrol_new lm4857_controls[] = { LM4857_WAKEUP, 1, 0), SOC_SINGLE("Earpiece 6dB Playback Switch", LM4857_CTRL, LM4857_EPGAIN, 1, 0), - - SOC_ENUM_EXT("Mode", lm4857_mode_enum, - lm4857_get_mode, lm4857_set_mode), };
-/* There is a demux between the input signal and the output signals. - * Currently there is no easy way to model it in ASoC and since it does not make - * much of a difference in practice simply connect the input direclty to the - * outputs. */ static const struct snd_soc_dapm_route lm4857_routes[] = { - {"LS", NULL, "IN"}, - {"HP", NULL, "IN"}, - {"EP", NULL, "IN"}, + { "Mode", NULL, "IN" }, + { "LS", "Loudspeaker", "Mode" }, + { "LS", "Loudspeaker + Headphone", "Mode" }, + { "HP", "Headphone", "Mode" }, + { "HP", "Loudspeaker + Headphone", "Mode" }, + { "EP", "Earpiece", "Mode" }, };
static struct snd_soc_codec_driver soc_codec_dev_lm4857 = { - .set_bias_level = lm4857_set_bias_level, - .controls = lm4857_controls, .num_controls = ARRAY_SIZE(lm4857_controls), .dapm_widgets = lm4857_dapm_widgets, @@ -165,17 +123,11 @@ static const struct regmap_config lm4857_regmap_config = { static int lm4857_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { - struct lm4857 *lm4857; - - lm4857 = devm_kzalloc(&i2c->dev, sizeof(*lm4857), GFP_KERNEL); - if (!lm4857) - return -ENOMEM; - - i2c_set_clientdata(i2c, lm4857); + struct regmap *regmap;
- lm4857->regmap = devm_regmap_init_i2c(i2c, &lm4857_regmap_config); - if (IS_ERR(lm4857->regmap)) - return PTR_ERR(lm4857->regmap); + regmap = devm_regmap_init_i2c(i2c, &lm4857_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap);
return snd_soc_register_codec(&i2c->dev, &soc_codec_dev_lm4857, NULL, 0); }
The driver does not use any CODEC specific constructs anymore. Convert it to snd_soc_component.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/codecs/lm4857.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/sound/soc/codecs/lm4857.c b/sound/soc/codecs/lm4857.c index dac9165..99ffc49 100644 --- a/sound/soc/codecs/lm4857.c +++ b/sound/soc/codecs/lm4857.c @@ -100,7 +100,7 @@ static const struct snd_soc_dapm_route lm4857_routes[] = { { "EP", "Earpiece", "Mode" }, };
-static struct snd_soc_codec_driver soc_codec_dev_lm4857 = { +static struct snd_soc_component_driver lm4857_component_driver = { .controls = lm4857_controls, .num_controls = ARRAY_SIZE(lm4857_controls), .dapm_widgets = lm4857_dapm_widgets, @@ -129,13 +129,8 @@ static int lm4857_i2c_probe(struct i2c_client *i2c, if (IS_ERR(regmap)) return PTR_ERR(regmap);
- return snd_soc_register_codec(&i2c->dev, &soc_codec_dev_lm4857, NULL, 0); -} - -static int lm4857_i2c_remove(struct i2c_client *i2c) -{ - snd_soc_unregister_codec(&i2c->dev); - return 0; + return devm_snd_soc_register_component(&i2c->dev, + &lm4857_component_driver, NULL, 0); }
static const struct i2c_device_id lm4857_i2c_id[] = { @@ -150,7 +145,6 @@ static struct i2c_driver lm4857_i2c_driver = { .owner = THIS_MODULE, }, .probe = lm4857_i2c_probe, - .remove = lm4857_i2c_remove, .id_table = lm4857_i2c_id, };
On Fri, May 01, 2015 at 06:02:42PM +0200, Lars-Peter Clausen wrote:
Currently new widgets are appended to the beginning of the cards widget list. This has the effect that widgets that are created while iterating
Applied, thanks.
On Fri, May 01, 2015 at 06:02:42PM +0200, Lars-Peter Clausen wrote:
Currently new widgets are appended to the beginning of the cards widget list. This has the effect that widgets that are created while iterating
Applied all, thanks.
participants (2)
-
Lars-Peter Clausen
-
Mark Brown