[alsa-devel] hdmi-codec: modifying params in hw_params() callback
Hi all,
While looking at hdmi-codec issues, I spotted this code:
static int hdmi_codec_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { ... if (params_width(params) > 24) params->msbits = 24;
params->msbits is a parameter that is negotiated and refined by libasound, and is part of the ALSA constraint system. The "Writing an ALSA driver" documentation says about the hw_params callback:
"This is called when the hardware parameter (``hw_params``) is set up by the application, that is, once when the buffer size, the period size, the format, etc. are defined for the pcm substream."
which suggests we should only be reading the parameters, not writing to them.
What's more is that the msbits is a parameter that is refined with userspace, so surely the above should be a declared constraint?
Digging a bit deeper, ASoC passes a private copy of the params to each codec - a copy is made, then fixups for TDM slots are applied, followed by any topology fixups by the DAI link (be_hw_params_fixup) before the codec driver's hw_params() callback is made. Afterwards, ASoC reads back the rate, channels and physical (memory) width and stores them in the codec's DAI structure. The msbits are not read.
hdmi-codec also seems to do nothing with the msbits parameter other than the above code.
So, all in all, it seems that the above code limiting msbits is redundant - nothing will read this modified value. Can we kill it?
Thanks.
On 28/02/2019 14:15, Russell King - ARM Linux admin wrote:
Hi all,
While looking at hdmi-codec issues, I spotted this code:
static int hdmi_codec_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { ... if (params_width(params) > 24) params->msbits = 24;
params->msbits is a parameter that is negotiated and refined by libasound, and is part of the ALSA constraint system. The "Writing an ALSA driver" documentation says about the hw_params callback:
"This is called when the hardware parameter (``hw_params``) is set up by the application, that is, once when the buffer size, the period size, the format, etc. are defined for the pcm substream."
which suggests we should only be reading the parameters, not writing to them.
What's more is that the msbits is a parameter that is refined with userspace, so surely the above should be a declared constraint?
Certainly not a constraint. While HDMI can only pass up to 24-bit per sample audio the most (or at least the two I have worked with) encoders can take 32-bit wide (and probably wider) samples trough i2s. So the system can play 32-bit samples, just the 4 LSB is ignored.
Actually there is very little difference between the case of playing 32-bit stereo audio with matching i2s bclk ratio, and playing 24-bit stereo audio with 64-bit bclk ratio. Especially when the 4 LSB is anyway ignored like in HDMI audio case.
Digging a bit deeper, ASoC passes a private copy of the params to each codec - a copy is made, then fixups for TDM slots are applied, followed by any topology fixups by the DAI link (be_hw_params_fixup) before the codec driver's hw_params() callback is made. Afterwards, ASoC reads back the rate, channels and physical (memory) width and stores them in the codec's DAI structure. The msbits are not read.
hdmi-codec also seems to do nothing with the msbits parameter other than the above code.
So, all in all, it seems that the above code limiting msbits is redundant - nothing will read this modified value. Can we kill it?
It certainly looks that way, so yes. In any case struct snd_soc_dai_driver .playback.sig_bits = 24 should be all that is needed.
Regards, Jyri
On Thu, Feb 28, 2019 at 02:54:29PM +0200, Jyri Sarha wrote:
On 28/02/2019 14:15, Russell King - ARM Linux admin wrote:
Hi all,
While looking at hdmi-codec issues, I spotted this code:
static int hdmi_codec_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { ... if (params_width(params) > 24) params->msbits = 24;
params->msbits is a parameter that is negotiated and refined by libasound, and is part of the ALSA constraint system. The "Writing an ALSA driver" documentation says about the hw_params callback:
"This is called when the hardware parameter (``hw_params``) is set up by the application, that is, once when the buffer size, the period size, the format, etc. are defined for the pcm substream."
which suggests we should only be reading the parameters, not writing to them.
What's more is that the msbits is a parameter that is refined with userspace, so surely the above should be a declared constraint?
Certainly not a constraint. While HDMI can only pass up to 24-bit per sample audio the most (or at least the two I have worked with) encoders can take 32-bit wide (and probably wider) samples trough i2s. So the system can play 32-bit samples, just the 4 LSB is ignored.
You have not explained why "not a constraint". From the explanation that Mark gave me on IRC, msbits is the number of bits that the codec respects, whereas the sample bits is the number of bits in the sample. If sample bits - msbits != 0, then that is the number of bits ignored. Mark basically described it as "feel free to send me more than 24 bits but I'm ignoring the LSBs".
If the msbits is limited to 24, then userspace gets to know about that limitation when negotiating with ALSA if it is a constraint. If it isn't a constraint, userspace has no way to know.
Actually there is very little difference between the case of playing 32-bit stereo audio with matching i2s bclk ratio, and playing 24-bit stereo audio with 64-bit bclk ratio. Especially when the 4 LSB is anyway ignored like in HDMI audio case.
You mean 8 LSB throughout the above two paragraphs.
Digging a bit deeper, ASoC passes a private copy of the params to each codec - a copy is made, then fixups for TDM slots are applied, followed by any topology fixups by the DAI link (be_hw_params_fixup) before the codec driver's hw_params() callback is made. Afterwards, ASoC reads back the rate, channels and physical (memory) width and stores them in the codec's DAI structure. The msbits are not read.
hdmi-codec also seems to do nothing with the msbits parameter other than the above code.
So, all in all, it seems that the above code limiting msbits is redundant - nothing will read this modified value. Can we kill it?
It certainly looks that way, so yes. In any case struct snd_soc_dai_driver .playback.sig_bits = 24 should be all that is needed.
This sets a constraint to limit msbits to 24 for any sample width in core ASoC code, doing exactly what you said "certainly not" to above.
It also means that the quoted code in hdmi-codec's hw_params() is redundant for another reason.
See the description of: snd_pcm_hw_constraint_msbits() in sound/core/pcm_lib.c, soc_pcm_set_msb() and soc_pcm_apply_msb() in sound/soc/soc-pcm.c.
Can you please clarify, because there seems to be some confusion.
Thanks.
On 28/02/2019 15:10, Russell King - ARM Linux admin wrote:
On Thu, Feb 28, 2019 at 02:54:29PM +0200, Jyri Sarha wrote:
On 28/02/2019 14:15, Russell King - ARM Linux admin wrote:
Hi all,
While looking at hdmi-codec issues, I spotted this code:
static int hdmi_codec_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { ... if (params_width(params) > 24) params->msbits = 24;
params->msbits is a parameter that is negotiated and refined by libasound, and is part of the ALSA constraint system. The "Writing an ALSA driver" documentation says about the hw_params callback:
"This is called when the hardware parameter (``hw_params``) is set up by the application, that is, once when the buffer size, the period size, the format, etc. are defined for the pcm substream."
which suggests we should only be reading the parameters, not writing to them.
What's more is that the msbits is a parameter that is refined with userspace, so surely the above should be a declared constraint?
Certainly not a constraint. While HDMI can only pass up to 24-bit per sample audio the most (or at least the two I have worked with) encoders can take 32-bit wide (and probably wider) samples trough i2s. So the system can play 32-bit samples, just the 4 LSB is ignored.
You have not explained why "not a constraint". From the explanation that Mark gave me on IRC, msbits is the number of bits that the codec respects, whereas the sample bits is the number of bits in the sample. If sample bits - msbits != 0, then that is the number of bits ignored. Mark basically described it as "feel free to send me more than 24 bits but I'm ignoring the LSBs".
If the msbits is limited to 24, then userspace gets to know about that limitation when negotiating with ALSA if it is a constraint. If it isn't a constraint, userspace has no way to know.
Actually there is very little difference between the case of playing 32-bit stereo audio with matching i2s bclk ratio, and playing 24-bit stereo audio with 64-bit bclk ratio. Especially when the 4 LSB is anyway ignored like in HDMI audio case.
You mean 8 LSB throughout the above two paragraphs.
Digging a bit deeper, ASoC passes a private copy of the params to each codec - a copy is made, then fixups for TDM slots are applied, followed by any topology fixups by the DAI link (be_hw_params_fixup) before the codec driver's hw_params() callback is made. Afterwards, ASoC reads back the rate, channels and physical (memory) width and stores them in the codec's DAI structure. The msbits are not read.
hdmi-codec also seems to do nothing with the msbits parameter other than the above code.
So, all in all, it seems that the above code limiting msbits is redundant - nothing will read this modified value. Can we kill it?
It certainly looks that way, so yes. In any case struct snd_soc_dai_driver .playback.sig_bits = 24 should be all that is needed.
This sets a constraint to limit msbits to 24 for any sample width in core ASoC code, doing exactly what you said "certainly not" to above.
It also means that the quoted code in hdmi-codec's hw_params() is redundant for another reason.
See the description of: snd_pcm_hw_constraint_msbits() in sound/core/pcm_lib.c, soc_pcm_set_msb() and soc_pcm_apply_msb() in sound/soc/soc-pcm.c.
Can you please clarify, because there seems to be some confusion.
If I understand right, the only confusion here is around the term "constraint". I did not follow that you meant in strictly alsa-term. Yes we should set msbits pcm_lib constraint to 24 (as hdmi-codec aready does), because HDMI interface can not deliver more than 24 bits per sample, and any extra LSB bit will be ignored.
On Thu, Feb 28, 2019 at 04:35:29PM +0200, Jyri Sarha wrote:
On 28/02/2019 15:10, Russell King - ARM Linux admin wrote:
On Thu, Feb 28, 2019 at 02:54:29PM +0200, Jyri Sarha wrote:
On 28/02/2019 14:15, Russell King - ARM Linux admin wrote:
Hi all,
While looking at hdmi-codec issues, I spotted this code:
static int hdmi_codec_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { ... if (params_width(params) > 24) params->msbits = 24;
params->msbits is a parameter that is negotiated and refined by libasound, and is part of the ALSA constraint system. The "Writing an ALSA driver" documentation says about the hw_params callback:
"This is called when the hardware parameter (``hw_params``) is set up by the application, that is, once when the buffer size, the period size, the format, etc. are defined for the pcm substream."
which suggests we should only be reading the parameters, not writing to them.
What's more is that the msbits is a parameter that is refined with userspace, so surely the above should be a declared constraint?
Certainly not a constraint. While HDMI can only pass up to 24-bit per sample audio the most (or at least the two I have worked with) encoders can take 32-bit wide (and probably wider) samples trough i2s. So the system can play 32-bit samples, just the 4 LSB is ignored.
You have not explained why "not a constraint". From the explanation that Mark gave me on IRC, msbits is the number of bits that the codec respects, whereas the sample bits is the number of bits in the sample. If sample bits - msbits != 0, then that is the number of bits ignored. Mark basically described it as "feel free to send me more than 24 bits but I'm ignoring the LSBs".
If the msbits is limited to 24, then userspace gets to know about that limitation when negotiating with ALSA if it is a constraint. If it isn't a constraint, userspace has no way to know.
Actually there is very little difference between the case of playing 32-bit stereo audio with matching i2s bclk ratio, and playing 24-bit stereo audio with 64-bit bclk ratio. Especially when the 4 LSB is anyway ignored like in HDMI audio case.
You mean 8 LSB throughout the above two paragraphs.
Digging a bit deeper, ASoC passes a private copy of the params to each codec - a copy is made, then fixups for TDM slots are applied, followed by any topology fixups by the DAI link (be_hw_params_fixup) before the codec driver's hw_params() callback is made. Afterwards, ASoC reads back the rate, channels and physical (memory) width and stores them in the codec's DAI structure. The msbits are not read.
hdmi-codec also seems to do nothing with the msbits parameter other than the above code.
So, all in all, it seems that the above code limiting msbits is redundant - nothing will read this modified value. Can we kill it?
It certainly looks that way, so yes. In any case struct snd_soc_dai_driver .playback.sig_bits = 24 should be all that is needed.
This sets a constraint to limit msbits to 24 for any sample width in core ASoC code, doing exactly what you said "certainly not" to above.
It also means that the quoted code in hdmi-codec's hw_params() is redundant for another reason.
See the description of: snd_pcm_hw_constraint_msbits() in sound/core/pcm_lib.c, soc_pcm_set_msb() and soc_pcm_apply_msb() in sound/soc/soc-pcm.c.
Can you please clarify, because there seems to be some confusion.
If I understand right, the only confusion here is around the term "constraint". I did not follow that you meant in strictly alsa-term. Yes we should set msbits pcm_lib constraint to 24 (as hdmi-codec aready does), because HDMI interface can not deliver more than 24 bits per sample, and any extra LSB bit will be ignored.
Right, so we can remove the above code then?
On 28/02/2019 16:39, Russell King - ARM Linux admin wrote:
On Thu, Feb 28, 2019 at 04:35:29PM +0200, Jyri Sarha wrote:
On 28/02/2019 15:10, Russell King - ARM Linux admin wrote:
On Thu, Feb 28, 2019 at 02:54:29PM +0200, Jyri Sarha wrote:
On 28/02/2019 14:15, Russell King - ARM Linux admin wrote:
Hi all,
While looking at hdmi-codec issues, I spotted this code:
static int hdmi_codec_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { ... if (params_width(params) > 24) params->msbits = 24;
params->msbits is a parameter that is negotiated and refined by libasound, and is part of the ALSA constraint system. The "Writing an ALSA driver" documentation says about the hw_params callback:
"This is called when the hardware parameter (``hw_params``) is set up by the application, that is, once when the buffer size, the period size, the format, etc. are defined for the pcm substream."
which suggests we should only be reading the parameters, not writing to them.
What's more is that the msbits is a parameter that is refined with userspace, so surely the above should be a declared constraint?
Certainly not a constraint. While HDMI can only pass up to 24-bit per sample audio the most (or at least the two I have worked with) encoders can take 32-bit wide (and probably wider) samples trough i2s. So the system can play 32-bit samples, just the 4 LSB is ignored.
You have not explained why "not a constraint". From the explanation that Mark gave me on IRC, msbits is the number of bits that the codec respects, whereas the sample bits is the number of bits in the sample. If sample bits - msbits != 0, then that is the number of bits ignored. Mark basically described it as "feel free to send me more than 24 bits but I'm ignoring the LSBs".
If the msbits is limited to 24, then userspace gets to know about that limitation when negotiating with ALSA if it is a constraint. If it isn't a constraint, userspace has no way to know.
Actually there is very little difference between the case of playing 32-bit stereo audio with matching i2s bclk ratio, and playing 24-bit stereo audio with 64-bit bclk ratio. Especially when the 4 LSB is anyway ignored like in HDMI audio case.
You mean 8 LSB throughout the above two paragraphs.
Digging a bit deeper, ASoC passes a private copy of the params to each codec - a copy is made, then fixups for TDM slots are applied, followed by any topology fixups by the DAI link (be_hw_params_fixup) before the codec driver's hw_params() callback is made. Afterwards, ASoC reads back the rate, channels and physical (memory) width and stores them in the codec's DAI structure. The msbits are not read.
hdmi-codec also seems to do nothing with the msbits parameter other than the above code.
So, all in all, it seems that the above code limiting msbits is redundant - nothing will read this modified value. Can we kill it?
It certainly looks that way, so yes. In any case struct snd_soc_dai_driver .playback.sig_bits = 24 should be all that is needed.
This sets a constraint to limit msbits to 24 for any sample width in core ASoC code, doing exactly what you said "certainly not" to above.
It also means that the quoted code in hdmi-codec's hw_params() is redundant for another reason.
See the description of: snd_pcm_hw_constraint_msbits() in sound/core/pcm_lib.c, soc_pcm_set_msb() and soc_pcm_apply_msb() in sound/soc/soc-pcm.c.
Can you please clarify, because there seems to be some confusion.
If I understand right, the only confusion here is around the term "constraint". I did not follow that you meant in strictly alsa-term. Yes we should set msbits pcm_lib constraint to 24 (as hdmi-codec aready does), because HDMI interface can not deliver more than 24 bits per sample, and any extra LSB bit will be ignored.
Right, so we can remove the above code then?
Yes, you correctly pointed out that this piece of code does nothing and is conceptually wrong:
if (params_width(params) > 24) params->msbits = 24;
Yes. It can be removed.
Russell King - ARM Linux admin wrote:
While looking at hdmi-codec issues, I spotted this code:
static int hdmi_codec_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { ... if (params_width(params) > 24) params->msbits = 24;
[...] What's more is that the msbits is a parameter that is refined with userspace, so surely the above should be a declared constraint?
Yes, there should be a call to "snd_pcm_hw_constraint_msbits" somewhere.
So, all in all, it seems that the above code limiting msbits is redundant - nothing will read this modified value. Can we kill it?
Yes.
Regards, Clemens
participants (3)
-
Clemens Ladisch -
Jyri Sarha -
Russell King - ARM Linux admin