[alsa-devel] [PATCH v4] ASoC: ics43432: Add codec driver for InvenSense ICS-43432 (fwd)
Add support for the InvenSense ICS-43432 I2S MEMS microphone.
This is a non-software-configurable MEMS microphone with I2S output.
Tested on a setup with a single ICS-43432, although the device itself supports stereo operation using a hardware pin controlling left vs. right channel output.
Signed-off-by: Ricard Wanderlof ricardw@axis.com --- V4: Updated commit message that the driver has been tested with real hardware, after off-list comment on V3.
V3: Fixed MODULE_LICENSE string.
V2: Update after comments from Lars-Peter: set rate to CONTINUOUS and let ALSA figure out the details, also removing hw_params as it is then not needed. I've left the checks in dai_set_fmt, as (IIUC) there currently doesn't seem to be a way for the ALSA framework to handle format constraints using the codec configuration struct.
.../devicetree/bindings/sound/ics43432.txt | 17 ++++ .../devicetree/bindings/vendor-prefixes.txt | 1 + sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/ics43432.c | 101 ++++++++++++++++++++ 5 files changed, 125 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ics43432.txt create mode 100644 sound/soc/codecs/ics43432.c
diff --git a/Documentation/devicetree/bindings/sound/ics43432.txt b/Documentation/devicetree/bindings/sound/ics43432.txt new file mode 100644 index 0000000..b02e3a6 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ics43432.txt @@ -0,0 +1,17 @@ +Invensense ICS-43432 MEMS microphone with I2S output. + +There are no software configuration options for this device, indeed, the only +host connection is the I2S interface. Apart from requirements on clock +frequency (460 kHz to 3.379 MHz according to the data sheet) there must be +64 clock cycles in each stereo output frame; 24 of the 32 available bits +contain audio data. A hardware pin determines if the device outputs data +on the left or right channel of the I2S frame. + +Required properties: + - compatible : Must be "invensense,ics43432" + +Example: + + ics43432: ics43432 { + compatible = "invensense,ics43432"; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 8033919..7966637 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -103,6 +103,7 @@ img Imagination Technologies Ltd. innolux Innolux Corporation intel Intel Corporation intercontrol Inter Control Group +invensense InvenSense Inc. isee ISEE 2007 S.L. isil Intersil karo Ka-Ro electronics GmbH diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 061c465..d696c85 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -62,6 +62,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_BT_SCO select SND_SOC_ES8328_SPI if SPI_MASTER select SND_SOC_ES8328_I2C if I2C + select SND_SOC_ICS43432 select SND_SOC_ISABELLE if I2C select SND_SOC_JZ4740_CODEC select SND_SOC_LM4857 if I2C @@ -444,6 +445,9 @@ config SND_SOC_ES8328_SPI tristate select SND_SOC_ES8328
+config SND_SOC_ICS43432 + tristate + config SND_SOC_ISABELLE tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index abe2d7e..23a2caf 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -55,6 +55,7 @@ snd-soc-dmic-objs := dmic.o snd-soc-es8328-objs := es8328.o snd-soc-es8328-i2c-objs := es8328-i2c.o snd-soc-es8328-spi-objs := es8328-spi.o +snd-soc-ics43432-objs := ics43432.o snd-soc-isabelle-objs := isabelle.o snd-soc-jz4740-codec-objs := jz4740.o snd-soc-l3-objs := l3.o @@ -240,6 +241,7 @@ obj-$(CONFIG_SND_SOC_DMIC) += snd-soc-dmic.o obj-$(CONFIG_SND_SOC_ES8328) += snd-soc-es8328.o obj-$(CONFIG_SND_SOC_ES8328_I2C)+= snd-soc-es8328-i2c.o obj-$(CONFIG_SND_SOC_ES8328_SPI)+= snd-soc-es8328-spi.o +obj-$(CONFIG_SND_SOC_ICS43432) += snd-soc-ics43432.o obj-$(CONFIG_SND_SOC_ISABELLE) += snd-soc-isabelle.o obj-$(CONFIG_SND_SOC_JZ4740_CODEC) += snd-soc-jz4740-codec.o obj-$(CONFIG_SND_SOC_L3) += snd-soc-l3.o diff --git a/sound/soc/codecs/ics43432.c b/sound/soc/codecs/ics43432.c new file mode 100644 index 0000000..fe0af4a --- /dev/null +++ b/sound/soc/codecs/ics43432.c @@ -0,0 +1,101 @@ +/* + * I2S MEMS microphone driver for InvenSense ICS-43432 + * + * - Non configurable. + * - I2S interface, 64 BCLs per frame, 32 bits per channel, 24 bit data + * + * Copyright (c) 2015 Axis Communications AB + * + * Licensed under GPL2. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/initval.h> +#include <sound/tlv.h> + +#define ICS43432_RATE_MIN 7190 /* Hz, from data sheet */ +#define ICS43432_RATE_MAX 52800 /* Hz, from data sheet */ + +static int ics43432_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + break; + default: + return -EINVAL; + } + + return 0; +} + +#define ICS43432_FORMATS (SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32) + +static const struct snd_soc_dai_ops ics43432_dai_ops = { + .set_fmt = ics43432_set_dai_fmt, +}; + +static struct snd_soc_dai_driver ics43432_dai = { + .name = "ics43432-hifi", + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rate_min = ICS43432_RATE_MIN, + .rate_max = ICS43432_RATE_MAX, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .formats = ICS43432_FORMATS, + }, + .ops = &ics43432_dai_ops, +}; + +static struct snd_soc_codec_driver ics43432_codec_driver = { +}; + +static int ics43432_probe(struct platform_device *pdev) +{ + return snd_soc_register_codec(&pdev->dev, &ics43432_codec_driver, + &ics43432_dai, 1); +} + +static int ics43432_remove(struct platform_device *pdev) +{ + snd_soc_unregister_codec(&pdev->dev); + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id ics43432_ids[] = { + { .compatible = "invensense,ics43432", }, + { } +}; +MODULE_DEVICE_TABLE(of, ics43432_dt_ids); +#endif + +static struct platform_driver ics43432_driver = { + .driver = { + .name = "ics43432", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(ics43432_ids), + }, + .probe = ics43432_probe, + .remove = ics43432_remove, +}; + +module_platform_driver(ics43432_driver); + +MODULE_DESCRIPTION("ASoC ICS43432 driver"); +MODULE_AUTHOR("Ricard Wanderlof ricardw@axis.com"); +MODULE_LICENSE("GPLv2");
On Mon, Aug 24, 2015 at 02:03:14PM +0200, Ricard Wanderlof wrote:
+static int ics43432_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{
- switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
- case SND_SOC_DAIFMT_NB_NF:
break;
- default:
return -EINVAL;
- }
I've asked you several times to implement format checking in the core if you think it's useful to add :(
On Tue, 25 Aug 2015, Mark Brown wrote:
On Mon, Aug 24, 2015 at 02:03:14PM +0200, Ricard Wanderlof wrote:
+static int ics43432_set_dai_fmt(struct snd_soc_dai *dai, unsigned int +fmt) {
- switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
- case SND_SOC_DAIFMT_NB_NF:
break;
- default:
return -EINVAL;
- }
I've asked you several times to implement format checking in the core if you think it's useful to add :(
Sorry, I misunderstood the outcome of the discussion with you and Lars-Peter, to the point that it was better to have that type of checking in the core, but in the absence of that (since apparently no one has had the need to had it before) it was better to have the check at the driver level than not at all.
I'll take it out of the driver and repost.
/Ricard
participants (2)
-
Mark Brown
-
Ricard Wanderlof