[PATCH] ASoC: codecs: lpass-wsa-macro: fix RX MIX input controls
Attempting to use the RX MIX path at 48kHz plays at 96kHz, because these controls are incorrectly toggling the first bit of the register, which is part of the FS_RATE field.
Fix the problem by using the same method used by the "WSA RX_MIX EC0_MUX" control, which is to use SND_SOC_NOPM as the register and use an enum in the shift field instead.
Fixes: 2c4066e5d428 ("ASoC: codecs: lpass-wsa-macro: add dapm widgets and route") Signed-off-by: Jonathan Marek jonathan@marek.ca --- sound/soc/codecs/lpass-wsa-macro.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/sound/soc/codecs/lpass-wsa-macro.c b/sound/soc/codecs/lpass-wsa-macro.c index f399f4dff5511..bd2561f9fb9fa 100644 --- a/sound/soc/codecs/lpass-wsa-macro.c +++ b/sound/soc/codecs/lpass-wsa-macro.c @@ -1211,14 +1211,16 @@ static int wsa_macro_enable_mix_path(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); - u16 gain_reg; + u16 path_reg, gain_reg; int val;
- switch (w->reg) { - case CDC_WSA_RX0_RX_PATH_MIX_CTL: + switch (w->shift) { + case WSA_MACRO_RX_MIX0: + path_reg = CDC_WSA_RX0_RX_PATH_MIX_CTL; gain_reg = CDC_WSA_RX0_RX_VOL_MIX_CTL; break; - case CDC_WSA_RX1_RX_PATH_MIX_CTL: + case WSA_MACRO_RX_MIX1: + path_reg = CDC_WSA_RX1_RX_PATH_MIX_CTL; gain_reg = CDC_WSA_RX1_RX_VOL_MIX_CTL; break; default: @@ -1231,7 +1233,7 @@ static int wsa_macro_enable_mix_path(struct snd_soc_dapm_widget *w, snd_soc_component_write(component, gain_reg, val); break; case SND_SOC_DAPM_POST_PMD: - snd_soc_component_update_bits(component, w->reg, + snd_soc_component_update_bits(component, path_reg, CDC_WSA_RX_PATH_MIX_CLK_EN_MASK, CDC_WSA_RX_PATH_MIX_CLK_DISABLE); break; @@ -2068,14 +2070,14 @@ static const struct snd_soc_dapm_widget wsa_macro_dapm_widgets[] = { SND_SOC_DAPM_MUX("WSA_RX0 INP0", SND_SOC_NOPM, 0, 0, &rx0_prim_inp0_mux), SND_SOC_DAPM_MUX("WSA_RX0 INP1", SND_SOC_NOPM, 0, 0, &rx0_prim_inp1_mux), SND_SOC_DAPM_MUX("WSA_RX0 INP2", SND_SOC_NOPM, 0, 0, &rx0_prim_inp2_mux), - SND_SOC_DAPM_MUX_E("WSA_RX0 MIX INP", CDC_WSA_RX0_RX_PATH_MIX_CTL, - 0, 0, &rx0_mix_mux, wsa_macro_enable_mix_path, + SND_SOC_DAPM_MUX_E("WSA_RX0 MIX INP", SND_SOC_NOPM, WSA_MACRO_RX_MIX0, + 0, &rx0_mix_mux, wsa_macro_enable_mix_path, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_MUX("WSA_RX1 INP0", SND_SOC_NOPM, 0, 0, &rx1_prim_inp0_mux), SND_SOC_DAPM_MUX("WSA_RX1 INP1", SND_SOC_NOPM, 0, 0, &rx1_prim_inp1_mux), SND_SOC_DAPM_MUX("WSA_RX1 INP2", SND_SOC_NOPM, 0, 0, &rx1_prim_inp2_mux), - SND_SOC_DAPM_MUX_E("WSA_RX1 MIX INP", CDC_WSA_RX1_RX_PATH_MIX_CTL, - 0, 0, &rx1_mix_mux, wsa_macro_enable_mix_path, + SND_SOC_DAPM_MUX_E("WSA_RX1 MIX INP", SND_SOC_NOPM, WSA_MACRO_RX_MIX1, + 0, &rx1_mix_mux, wsa_macro_enable_mix_path, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
SND_SOC_DAPM_MIXER_E("WSA_RX INT0 MIX", SND_SOC_NOPM, 0, 0, NULL, 0,
Thanks Jonathan for testing the Mix path!
On 05/03/2021 00:50, Jonathan Marek wrote:
Attempting to use the RX MIX path at 48kHz plays at 96kHz, because these controls are incorrectly toggling the first bit of the register, which is part of the FS_RATE field.
Yes bit 0 is part of PCM RATE!
Fix the problem by using the same method used by the "WSA RX_MIX EC0_MUX" control, which is to use SND_SOC_NOPM as the register and use an enum in the shift field instead.
Fixes: 2c4066e5d428 ("ASoC: codecs: lpass-wsa-macro: add dapm widgets and route") Signed-off-by: Jonathan Marek jonathan@marek.ca
This looks good to me.
Reviewed-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org
sound/soc/codecs/lpass-wsa-macro.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/sound/soc/codecs/lpass-wsa-macro.c b/sound/soc/codecs/lpass-wsa-macro.c index f399f4dff5511..bd2561f9fb9fa 100644 --- a/sound/soc/codecs/lpass-wsa-macro.c +++ b/sound/soc/codecs/lpass-wsa-macro.c @@ -1211,14 +1211,16 @@ static int wsa_macro_enable_mix_path(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
- u16 gain_reg;
- u16 path_reg, gain_reg; int val;
- switch (w->reg) {
- case CDC_WSA_RX0_RX_PATH_MIX_CTL:
- switch (w->shift) {
- case WSA_MACRO_RX_MIX0:
path_reg = CDC_WSA_RX0_RX_PATH_MIX_CTL;
- case CDC_WSA_RX1_RX_PATH_MIX_CTL:
- case WSA_MACRO_RX_MIX1:
path_reg = CDC_WSA_RX1_RX_PATH_MIX_CTL;@@ -1231,7 +1233,7 @@ static int wsa_macro_enable_mix_path(struct snd_soc_dapm_widget *w, snd_soc_component_write(component, gain_reg, val); break; case SND_SOC_DAPM_POST_PMD:
snd_soc_component_update_bits(component, w->reg,
snd_soc_component_update_bits(component, path_reg, CDC_WSA_RX_PATH_MIX_CLK_EN_MASK, CDC_WSA_RX_PATH_MIX_CLK_DISABLE);@@ -2068,14 +2070,14 @@ static const struct snd_soc_dapm_widget wsa_macro_dapm_widgets[] = { SND_SOC_DAPM_MUX("WSA_RX0 INP0", SND_SOC_NOPM, 0, 0, &rx0_prim_inp0_mux), SND_SOC_DAPM_MUX("WSA_RX0 INP1", SND_SOC_NOPM, 0, 0, &rx0_prim_inp1_mux), SND_SOC_DAPM_MUX("WSA_RX0 INP2", SND_SOC_NOPM, 0, 0, &rx0_prim_inp2_mux),
- SND_SOC_DAPM_MUX_E("WSA_RX0 MIX INP", CDC_WSA_RX0_RX_PATH_MIX_CTL,
0, 0, &rx0_mix_mux, wsa_macro_enable_mix_path,
- SND_SOC_DAPM_MUX_E("WSA_RX0 MIX INP", SND_SOC_NOPM, WSA_MACRO_RX_MIX0,
0, &rx0_mix_mux, wsa_macro_enable_mix_path, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
- SND_SOC_DAPM_MUX_E("WSA_RX1 MIX INP", CDC_WSA_RX1_RX_PATH_MIX_CTL,
0, 0, &rx1_mix_mux, wsa_macro_enable_mix_path,
SND_SOC_DAPM_MUX_E("WSA_RX1 MIX INP", SND_SOC_NOPM, WSA_MACRO_RX_MIX1,
0, &rx1_mix_mux, wsa_macro_enable_mix_path, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),SND_SOC_DAPM_MIXER_E("WSA_RX INT0 MIX", SND_SOC_NOPM, 0, 0, NULL, 0,
On Thu, 4 Mar 2021 19:50:48 -0500, Jonathan Marek wrote:
Attempting to use the RX MIX path at 48kHz plays at 96kHz, because these controls are incorrectly toggling the first bit of the register, which is part of the FS_RATE field.
Fix the problem by using the same method used by the "WSA RX_MIX EC0_MUX" control, which is to use SND_SOC_NOPM as the register and use an enum in the shift field instead.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: codecs: lpass-wsa-macro: fix RX MIX input controls commit: 810c4ac485e9de34624469a1c5ad1453699b993c
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
participants (3)
-
Jonathan Marek -
Mark Brown -
Srinivas Kandagatla