From: Hans de Goede hdegoede@redhat.com

[ Upstream commit 92d3360108f1839ca40451bad20ff67dd24a1964 ]

Add a quirk mechanism to allow specifying that active-high jack-detection should be used on platforms where this info is not available in devicetree.

And add an entry for the Cyberbook T116 tablet to the DMI table, so that jack-detection will work properly on this tablet.

Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20211002211459.110124-2-hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/nau8824.c | 40 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+)

diff --git a/sound/soc/codecs/nau8824.c b/sound/soc/codecs/nau8824.c index f946ef65a4c19..f7018f2dd21fd 100644 --- a/sound/soc/codecs/nau8824.c +++ b/sound/soc/codecs/nau8824.c @@ -8,6 +8,7 @@

#include <linux/module.h> #include <linux/delay.h> +#include <linux/dmi.h> #include <linux/init.h> #include <linux/i2c.h> #include <linux/regmap.h> @@ -27,6 +28,12 @@

#include "nau8824.h"

+#define NAU8824_JD_ACTIVE_HIGH BIT(0) + +static int nau8824_quirk; +static int quirk_override = -1; +module_param_named(quirk, quirk_override, uint, 0444); +MODULE_PARM_DESC(quirk, "Board-specific quirk override");

static int nau8824_config_sysclk(struct nau8824 *nau8824, int clk_id, unsigned int freq); @@ -1845,6 +1852,34 @@ static int nau8824_read_device_properties(struct device *dev, return 0; }

+/* Please keep this list alphabetically sorted */ +static const struct dmi_system_id nau8824_quirk_table[] = { + { + /* Cyberbook T116 rugged tablet */ + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Default string"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"), + DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "20170531"), + }, + .driver_data = (void *)(NAU8824_JD_ACTIVE_HIGH), + }, + {} +}; + +static void nau8824_check_quirks(void) +{ + const struct dmi_system_id *dmi_id; + + if (quirk_override != -1) { + nau8824_quirk = quirk_override; + return; + } + + dmi_id = dmi_first_match(nau8824_quirk_table); + if (dmi_id) + nau8824_quirk = (unsigned long)dmi_id->driver_data; +} + static int nau8824_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -1869,6 +1904,11 @@ static int nau8824_i2c_probe(struct i2c_client *i2c, nau8824->irq = i2c->irq; sema_init(&nau8824->jd_sem, 1);

+ nau8824_check_quirks(); + + if (nau8824_quirk & NAU8824_JD_ACTIVE_HIGH) + nau8824->jkdet_polarity = 0; + nau8824_print_device_properties(nau8824);

ret = regmap_read(nau8824->regmap, NAU8824_REG_I2C_DEVICE_ID, &value);