[PATCH v2 0/2] ASoC: fsl_xcvr: Support i.MX95 platform
On i.MX95 wakeup domain, there is one instance of Audio XCVR supporting SPDIF mode with a connection to the Audio XCVR physical interface.
changes in v2: - Merge patch 1&2, 3&4 from v1 together. - Add more comments in commit message - Add constaint for clocks used on i.mx95 - Add 'select SND_SOC_FSL_UTILS' for compiling issue.
Shengjiu Wang (2): ASoC: dt-bindings: fsl,xcvr: Add compatible string for i.MX95 ASoC: fsl_xcvr: Add support for i.MX95 platform
.../devicetree/bindings/sound/fsl,xcvr.yaml | 55 ++++++-- sound/soc/fsl/Kconfig | 1 + sound/soc/fsl/fsl_xcvr.c | 128 ++++++++++++------ sound/soc/fsl/fsl_xcvr.h | 91 +++++++++++++ 4 files changed, 222 insertions(+), 53 deletions(-)
Add compatible string "fsl,imx95-xcvr" for i.MX95 platform.
The difference between each platform is in below table.
+---------+--------+----------+--------+ | SOC | PHY | eARC/ARC | SPDIF | +---------+--------+----------+--------+ | i.MX8MP | V1 | Yes | Yes | +---------+--------+----------+--------+ | i.MX93 | N/A | N/A | Yes | +---------+--------+----------+--------+ | i.MX95 | V2 | N/A | Yes | +---------+--------+----------+--------+
On i.MX95, there are two PLL clock sources, they are the parent clocks of the XCVR root clock. one is for 8kHz series rates, named as 'pll8k', another one is for 11kHz series rates, named as 'pll11k'. They are optional clocks, if there are such clocks, then the driver can switch between them to support more accurate sample rates.
As 'pll8k' and 'pll11k' are optional, then add 'minItems: 4' for clocks and clock-names properties.
Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com --- .../devicetree/bindings/sound/fsl,xcvr.yaml | 55 +++++++++++++++---- 1 file changed, 45 insertions(+), 10 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml index 0eb0c1ba8710..70bcde33e986 100644 --- a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml @@ -22,6 +22,7 @@ properties: enum: - fsl,imx8mp-xcvr - fsl,imx93-xcvr + - fsl,imx95-xcvr
reg: items: @@ -44,18 +45,12 @@ properties: minItems: 1
clocks: - items: - - description: Peripheral clock - - description: PHY clock - - description: SPBA clock - - description: PLL clock + minItems: 4 + maxItems: 6
clock-names: - items: - - const: ipg - - const: phy - - const: spba - - const: pll_ipg + minItems: 4 + maxItems: 6
dmas: items: @@ -97,6 +92,46 @@ allOf: properties: interrupts: maxItems: 1 + - if: + properties: + compatible: + contains: + enum: + - fsl,imx95-xcvr + then: + properties: + clocks: + items: + - description: Peripheral clock + - description: PHY clock + - description: SPBA clock + - description: PLL clock + - description: PLL clock source for 8kHz series + - description: PLL clock source for 11kHz series + minItems: 4 + clock-names: + items: + - const: ipg + - const: phy + - const: spba + - const: pll_ipg + - const: pll8k + - const: pll11k + minItems: 4 + else: + properties: + clocks: + items: + - description: Peripheral clock + - description: PHY clock + - description: SPBA clock + - description: PLL clock + clock-names: + items: + - const: ipg + - const: phy + - const: spba + - const: pll_ipg
additionalProperties: false
On Tue, May 14, 2024 at 11:12:08AM +0800, Shengjiu Wang wrote:
Add compatible string "fsl,imx95-xcvr" for i.MX95 platform.
The difference between each platform is in below table.
+---------+--------+----------+--------+ | SOC | PHY | eARC/ARC | SPDIF | +---------+--------+----------+--------+ | i.MX8MP | V1 | Yes | Yes | +---------+--------+----------+--------+ | i.MX93 | N/A | N/A | Yes | +---------+--------+----------+--------+ | i.MX95 | V2 | N/A | Yes | +---------+--------+----------+--------+
On i.MX95, there are two PLL clock sources, they are the parent clocks of the XCVR root clock. one is for 8kHz series rates, named as 'pll8k', another one is for 11kHz series rates, named as 'pll11k'. They are optional clocks, if there are such clocks, then the driver can switch between them to support more accurate sample rates.
As 'pll8k' and 'pll11k' are optional, then add 'minItems: 4' for clocks and clock-names properties.
Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com
.../devicetree/bindings/sound/fsl,xcvr.yaml | 55 +++++++++++++++---- 1 file changed, 45 insertions(+), 10 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml index 0eb0c1ba8710..70bcde33e986 100644 --- a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml @@ -22,6 +22,7 @@ properties: enum: - fsl,imx8mp-xcvr - fsl,imx93-xcvr
- fsl,imx95-xcvr
reg: items:
@@ -44,18 +45,12 @@ properties: minItems: 1
clocks:
- items:
- description: Peripheral clock
- description: PHY clock
- description: SPBA clock
- description: PLL clock
Leave these here and add pll8k and pll11k.
- minItems: 4
Keep this.
maxItems: 6
clock-names:
- items:
- const: ipg
- const: phy
- const: spba
- const: pll_ipg
- minItems: 4
- maxItems: 6
Same here.
dmas: items: @@ -97,6 +92,46 @@ allOf: properties: interrupts: maxItems: 1
- if:
properties:
compatible:
contains:
enum:
- fsl,imx95-xcvr
- then:
properties:
clocks:
items:
- description: Peripheral clock
- description: PHY clock
- description: SPBA clock
- description: PLL clock
- description: PLL clock source for 8kHz series
- description: PLL clock source for 11kHz series
minItems: 4
clock-names:
items:
- const: ipg
- const: phy
- const: spba
- const: pll_ipg
- const: pll8k
- const: pll11k
minItems: 4
Drop all this.
- else:
properties:
clocks:
items:
- description: Peripheral clock
- description: PHY clock
- description: SPBA clock
- description: PLL clock
clock-names:
items:
- const: ipg
- const: phy
- const: spba
- const: pll_ipg
And for this case, you just need 'maxItems: 4'.
Rob
On Tue, May 21, 2024 at 12:16 AM Rob Herring robh@kernel.org wrote:
On Tue, May 14, 2024 at 11:12:08AM +0800, Shengjiu Wang wrote:
Add compatible string "fsl,imx95-xcvr" for i.MX95 platform.
The difference between each platform is in below table.
+---------+--------+----------+--------+ | SOC | PHY | eARC/ARC | SPDIF | +---------+--------+----------+--------+ | i.MX8MP | V1 | Yes | Yes | +---------+--------+----------+--------+ | i.MX93 | N/A | N/A | Yes | +---------+--------+----------+--------+ | i.MX95 | V2 | N/A | Yes | +---------+--------+----------+--------+
On i.MX95, there are two PLL clock sources, they are the parent clocks of the XCVR root clock. one is for 8kHz series rates, named as 'pll8k', another one is for 11kHz series rates, named as 'pll11k'. They are optional clocks, if there are such clocks, then the driver can switch between them to support more accurate sample rates.
As 'pll8k' and 'pll11k' are optional, then add 'minItems: 4' for clocks and clock-names properties.
Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com
.../devicetree/bindings/sound/fsl,xcvr.yaml | 55 +++++++++++++++---- 1 file changed, 45 insertions(+), 10 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml index 0eb0c1ba8710..70bcde33e986 100644 --- a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml @@ -22,6 +22,7 @@ properties: enum: - fsl,imx8mp-xcvr - fsl,imx93-xcvr
- fsl,imx95-xcvr
reg: items:
@@ -44,18 +45,12 @@ properties: minItems: 1
clocks:
- items:
- description: Peripheral clock
- description: PHY clock
- description: SPBA clock
- description: PLL clock
Leave these here and add pll8k and pll11k.
- minItems: 4
Keep this.
maxItems: 6
clock-names:
- items:
- const: ipg
- const: phy
- const: spba
- const: pll_ipg
- minItems: 4
- maxItems: 6
Same here.
dmas: items: @@ -97,6 +92,46 @@ allOf: properties: interrupts: maxItems: 1
- if:
properties:
compatible:
contains:
enum:
- fsl,imx95-xcvr
- then:
properties:
clocks:
items:
- description: Peripheral clock
- description: PHY clock
- description: SPBA clock
- description: PLL clock
- description: PLL clock source for 8kHz series
- description: PLL clock source for 11kHz series
minItems: 4
clock-names:
items:
- const: ipg
- const: phy
- const: spba
- const: pll_ipg
- const: pll8k
- const: pll11k
minItems: 4
Drop all this.
- else:
properties:
clocks:
items:
- description: Peripheral clock
- description: PHY clock
- description: SPBA clock
- description: PLL clock
clock-names:
items:
- const: ipg
- const: phy
- const: spba
- const: pll_ipg
And for this case, you just need 'maxItems: 4'.
Thanks for the comments.
I will address them in the next version.
Best regards Shengjiu Wang
On i.MX95, the XCVR uses a new PLL in the PHY, which is General Purpose (GP) PLL. Add GP PLL configuration support in the driver and add the 'pll_ver' flag to distinguish different PLL on different platforms.
The XCVR also use PHY but limited for SPDIF only case Add 'use_phy' flag to distinguish these platforms.
When there are 'pll8k' and 'pll11k' clock existing, the clock source of 'phy_clk' can be changed for different sample rate requirement.
Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com Reviewed-by: Chancel Liu chancel.liu@nxp.com --- sound/soc/fsl/Kconfig | 1 + sound/soc/fsl/fsl_xcvr.c | 128 ++++++++++++++++++++++++++------------- sound/soc/fsl/fsl_xcvr.h | 91 ++++++++++++++++++++++++++++ 3 files changed, 177 insertions(+), 43 deletions(-)
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index 270726c134b3..9a371d4496c2 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -103,6 +103,7 @@ config SND_SOC_FSL_XCVR select REGMAP_MMIO select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n select SND_SOC_GENERIC_DMAENGINE_PCM + select SND_SOC_FSL_UTILS help Say Y if you want to add Audio Transceiver (XCVR) support for NXP iMX CPUs. XCVR is a digital module that supports HDMI2.1 eARC, diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c index c46f64557a7f..6b1715ac67c5 100644 --- a/sound/soc/fsl/fsl_xcvr.c +++ b/sound/soc/fsl/fsl_xcvr.c @@ -15,14 +15,22 @@ #include <sound/pcm_params.h>
#include "fsl_xcvr.h" +#include "fsl_utils.h" #include "imx-pcm.h"
#define FSL_XCVR_CAPDS_SIZE 256
+enum fsl_xcvr_pll_verison { + PLL_MX8MP, + PLL_MX95, +}; + struct fsl_xcvr_soc_data { const char *fw_name; bool spdif_only; bool use_edma; + bool use_phy; + enum fsl_xcvr_pll_verison pll_ver; };
struct fsl_xcvr { @@ -33,6 +41,8 @@ struct fsl_xcvr { struct clk *pll_ipg_clk; struct clk *phy_clk; struct clk *spba_clk; + struct clk *pll8k_clk; + struct clk *pll11k_clk; struct reset_control *reset; u8 streams; u32 mode; @@ -262,10 +272,10 @@ static int fsl_xcvr_ai_write(struct fsl_xcvr *xcvr, u8 reg, u32 data, bool phy) static int fsl_xcvr_en_phy_pll(struct fsl_xcvr *xcvr, u32 freq, bool tx) { struct device *dev = &xcvr->pdev->dev; - u32 i, div = 0, log2; + u32 i, div = 0, log2, val; int ret;
- if (xcvr->soc_data->spdif_only) + if (!xcvr->soc_data->use_phy) return 0;
for (i = 0; i < ARRAY_SIZE(fsl_xcvr_pll_cfg); i++) { @@ -288,45 +298,62 @@ static int fsl_xcvr_en_phy_pll(struct fsl_xcvr *xcvr, u32 freq, bool tx) return ret; }
- /* PLL: BANDGAP_SET: EN_VBG (enable bandgap) */ - fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_BANDGAP_SET, - FSL_XCVR_PLL_BANDGAP_EN_VBG, 0); - - /* PLL: CTRL0: DIV_INTEGER */ - fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0, fsl_xcvr_pll_cfg[i].mfi, 0); - /* PLL: NUMERATOR: MFN */ - fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_NUM, fsl_xcvr_pll_cfg[i].mfn, 0); - /* PLL: DENOMINATOR: MFD */ - fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_DEN, fsl_xcvr_pll_cfg[i].mfd, 0); - /* PLL: CTRL0_SET: HOLD_RING_OFF, POWER_UP */ - fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_SET, - FSL_XCVR_PLL_CTRL0_HROFF | FSL_XCVR_PLL_CTRL0_PWP, 0); - udelay(25); - /* PLL: CTRL0: Clear Hold Ring Off */ - fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_CLR, - FSL_XCVR_PLL_CTRL0_HROFF, 0); - udelay(100); - if (tx) { /* TX is enabled for SPDIF only */ - /* PLL: POSTDIV: PDIV0 */ - fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_PDIV, - FSL_XCVR_PLL_PDIVx(log2, 0), 0); - /* PLL: CTRL_SET: CLKMUX0_EN */ - fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_SET, - FSL_XCVR_PLL_CTRL0_CM0_EN, 0); - } else if (xcvr->mode == FSL_XCVR_MODE_EARC) { /* eARC RX */ - /* PLL: POSTDIV: PDIV1 */ - fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_PDIV, - FSL_XCVR_PLL_PDIVx(log2, 1), 0); - /* PLL: CTRL_SET: CLKMUX1_EN */ - fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_SET, - FSL_XCVR_PLL_CTRL0_CM1_EN, 0); - } else { /* SPDIF / ARC RX */ - /* PLL: POSTDIV: PDIV2 */ - fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_PDIV, - FSL_XCVR_PLL_PDIVx(log2, 2), 0); - /* PLL: CTRL_SET: CLKMUX2_EN */ + switch (xcvr->soc_data->pll_ver) { + case PLL_MX8MP: + /* PLL: BANDGAP_SET: EN_VBG (enable bandgap) */ + fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_BANDGAP_SET, + FSL_XCVR_PLL_BANDGAP_EN_VBG, 0); + + /* PLL: CTRL0: DIV_INTEGER */ + fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0, fsl_xcvr_pll_cfg[i].mfi, 0); + /* PLL: NUMERATOR: MFN */ + fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_NUM, fsl_xcvr_pll_cfg[i].mfn, 0); + /* PLL: DENOMINATOR: MFD */ + fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_DEN, fsl_xcvr_pll_cfg[i].mfd, 0); + /* PLL: CTRL0_SET: HOLD_RING_OFF, POWER_UP */ fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_SET, - FSL_XCVR_PLL_CTRL0_CM2_EN, 0); + FSL_XCVR_PLL_CTRL0_HROFF | FSL_XCVR_PLL_CTRL0_PWP, 0); + udelay(25); + /* PLL: CTRL0: Clear Hold Ring Off */ + fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_CLR, + FSL_XCVR_PLL_CTRL0_HROFF, 0); + udelay(100); + if (tx) { /* TX is enabled for SPDIF only */ + /* PLL: POSTDIV: PDIV0 */ + fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_PDIV, + FSL_XCVR_PLL_PDIVx(log2, 0), 0); + /* PLL: CTRL_SET: CLKMUX0_EN */ + fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_SET, + FSL_XCVR_PLL_CTRL0_CM0_EN, 0); + } else if (xcvr->mode == FSL_XCVR_MODE_EARC) { /* eARC RX */ + /* PLL: POSTDIV: PDIV1 */ + fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_PDIV, + FSL_XCVR_PLL_PDIVx(log2, 1), 0); + /* PLL: CTRL_SET: CLKMUX1_EN */ + fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_SET, + FSL_XCVR_PLL_CTRL0_CM1_EN, 0); + } else { /* SPDIF / ARC RX */ + /* PLL: POSTDIV: PDIV2 */ + fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_PDIV, + FSL_XCVR_PLL_PDIVx(log2, 2), 0); + /* PLL: CTRL_SET: CLKMUX2_EN */ + fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_SET, + FSL_XCVR_PLL_CTRL0_CM2_EN, 0); + } + break; + case PLL_MX95: + val = fsl_xcvr_pll_cfg[i].mfi << FSL_XCVR_GP_PLL_DIV_MFI_SHIFT | div; + fsl_xcvr_ai_write(xcvr, FSL_XCVR_GP_PLL_DIV, val, 0); + val = fsl_xcvr_pll_cfg[i].mfn << FSL_XCVR_GP_PLL_NUMERATOR_MFN_SHIFT; + fsl_xcvr_ai_write(xcvr, FSL_XCVR_GP_PLL_NUMERATOR, val, 0); + fsl_xcvr_ai_write(xcvr, FSL_XCVR_GP_PLL_DENOMINATOR, + fsl_xcvr_pll_cfg[i].mfd, 0); + val = FSL_XCVR_GP_PLL_CTRL_POWERUP | FSL_XCVR_GP_PLL_CTRL_CLKMUX_EN; + fsl_xcvr_ai_write(xcvr, FSL_XCVR_GP_PLL_CTRL, val, 0); + break; + default: + dev_err(dev, "Error for PLL version %d\n", xcvr->soc_data->pll_ver); + return -EINVAL; }
if (xcvr->mode == FSL_XCVR_MODE_EARC) { /* eARC mode */ @@ -362,6 +389,8 @@ static int fsl_xcvr_en_aud_pll(struct fsl_xcvr *xcvr, u32 freq)
freq = xcvr->soc_data->spdif_only ? freq / 5 : freq; clk_disable_unprepare(xcvr->phy_clk); + fsl_asoc_reparent_pll_clocks(dev, xcvr->phy_clk, + xcvr->pll8k_clk, xcvr->pll11k_clk, freq); ret = clk_set_rate(xcvr->phy_clk, freq); if (ret < 0) { dev_err(dev, "Error while setting AUD PLL rate: %d\n", ret); @@ -373,7 +402,7 @@ static int fsl_xcvr_en_aud_pll(struct fsl_xcvr *xcvr, u32 freq) return ret; }
- if (xcvr->soc_data->spdif_only) + if (!xcvr->soc_data->use_phy) return 0; /* Release AI interface from reset */ ret = regmap_write(xcvr->regmap, FSL_XCVR_PHY_AI_CTRL_SET, @@ -1017,7 +1046,7 @@ static bool fsl_xcvr_readable_reg(struct device *dev, unsigned int reg) { struct fsl_xcvr *xcvr = dev_get_drvdata(dev);
- if (xcvr->soc_data->spdif_only) + if (!xcvr->soc_data->use_phy) if ((reg >= FSL_XCVR_IER && reg <= FSL_XCVR_PHY_AI_RDATA) || reg > FSL_XCVR_TX_DPTH_BCRR) return false; @@ -1090,7 +1119,7 @@ static bool fsl_xcvr_writeable_reg(struct device *dev, unsigned int reg) { struct fsl_xcvr *xcvr = dev_get_drvdata(dev);
- if (xcvr->soc_data->spdif_only) + if (!xcvr->soc_data->use_phy) if (reg >= FSL_XCVR_IER && reg <= FSL_XCVR_PHY_AI_RDATA) return false; switch (reg) { @@ -1234,6 +1263,8 @@ static irqreturn_t irq0_isr(int irq, void *devid)
static const struct fsl_xcvr_soc_data fsl_xcvr_imx8mp_data = { .fw_name = "imx/xcvr/xcvr-imx8mp.bin", + .use_phy = true, + .pll_ver = PLL_MX8MP, };
static const struct fsl_xcvr_soc_data fsl_xcvr_imx93_data = { @@ -1241,9 +1272,17 @@ static const struct fsl_xcvr_soc_data fsl_xcvr_imx93_data = { .use_edma = true, };
+static const struct fsl_xcvr_soc_data fsl_xcvr_imx95_data = { + .spdif_only = true, + .use_phy = true, + .use_edma = true, + .pll_ver = PLL_MX95, +}; + static const struct of_device_id fsl_xcvr_dt_ids[] = { { .compatible = "fsl,imx8mp-xcvr", .data = &fsl_xcvr_imx8mp_data }, { .compatible = "fsl,imx93-xcvr", .data = &fsl_xcvr_imx93_data}, + { .compatible = "fsl,imx95-xcvr", .data = &fsl_xcvr_imx95_data}, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, fsl_xcvr_dt_ids); @@ -1287,6 +1326,9 @@ static int fsl_xcvr_probe(struct platform_device *pdev) return PTR_ERR(xcvr->pll_ipg_clk); }
+ fsl_asoc_get_pll_clocks(dev, &xcvr->pll8k_clk, + &xcvr->pll11k_clk); + xcvr->ram_addr = devm_platform_ioremap_resource_byname(pdev, "ram"); if (IS_ERR(xcvr->ram_addr)) return PTR_ERR(xcvr->ram_addr); diff --git a/sound/soc/fsl/fsl_xcvr.h b/sound/soc/fsl/fsl_xcvr.h index 044058fc6aa2..882428592e1a 100644 --- a/sound/soc/fsl/fsl_xcvr.h +++ b/sound/soc/fsl/fsl_xcvr.h @@ -291,4 +291,95 @@ #define FSL_XCVR_RX_CS_BUFF_1 0xA0 /* Second RX CS buffer */ #define FSL_XCVR_CAP_DATA_STR 0x300 /* Capabilities data structure */
+/* GP PLL Registers */ +#define FSL_XCVR_GP_PLL_CTRL 0x00 +#define FSL_XCVR_GP_PLL_CTRL_SET 0x04 +#define FSL_XCVR_GP_PLL_CTRL_CLR 0x08 +#define FSL_XCVR_GP_PLL_CTRL_TOG 0x0C +#define FSL_XCVR_GP_PLL_ANA_PRG 0x10 +#define FSL_XCVR_GP_PLL_ANA_PRG_SET 0x14 +#define FSL_XCVR_GP_PLL_ANA_PRG_CLR 0x18 +#define FSL_XCVR_GP_PLL_ANA_PRG_TOG 0x1C +#define FSL_XCVR_GP_PLL_TEST 0x20 +#define FSL_XCVR_GP_PLL_TEST_SET 0x24 +#define FSL_XCVR_GP_PLL_TEST_CLR 0x28 +#define FSL_XCVR_GP_PLL_TEST_TOG 0x2C +#define FSL_XCVR_GP_PLL_SPREAD_SPECTRUM 0x30 +#define FSL_XCVR_GP_PLL_SPREAD_SPECTRUM_SET 0x34 +#define FSL_XCVR_GP_PLL_SPREAD_SPECTRUM_CLR 0x38 +#define FSL_XCVR_GP_PLL_SPREAD_SPECTRUM_TOG 0x3C +#define FSL_XCVR_GP_PLL_NUMERATOR 0x40 +#define FSL_XCVR_GP_PLL_NUMERATOR_SET 0x44 +#define FSL_XCVR_GP_PLL_NUMERATOR_CLR 0x48 +#define FSL_XCVR_GP_PLL_NUMERATOR_TOG 0x4C +#define FSL_XCVR_GP_PLL_DENOMINATOR 0x50 +#define FSL_XCVR_GP_PLL_DENOMINATOR_SET 0x54 +#define FSL_XCVR_GP_PLL_DENOMINATOR_CLR 0x58 +#define FSL_XCVR_GP_PLL_DENOMINATOR_TOG 0x5C +#define FSL_XCVR_GP_PLL_DIV 0x60 +#define FSL_XCVR_GP_PLL_DIV_SET 0x64 +#define FSL_XCVR_GP_PLL_DIV_CLR 0x68 +#define FSL_XCVR_GP_PLL_DIV_TOG 0x6C +#define FSL_XCVR_GP_PLL_DFS_CTRL0 0x70 +#define FSL_XCVR_GP_PLL_DFS_CTRL0_SET 0x74 +#define FSL_XCVR_GP_PLL_DFS_CTRL0_CLR 0x78 +#define FSL_XCVR_GP_PLL_DFS_CTRL0_TOG 0x7C +#define FSL_XCVR_GP_PLL_DFS_DIV0 0x80 +#define FSL_XCVR_GP_PLL_DFS_DIV0_SET 0x84 +#define FSL_XCVR_GP_PLL_DFS_DIV0_CLR 0x88 +#define FSL_XCVR_GP_PLL_DFS_DIV0_TOG 0x8C +#define FSL_XCVR_GP_PLL_DFS_CTRL1 0x90 +#define FSL_XCVR_GP_PLL_DFS_CTRL1_SET 0x94 +#define FSL_XCVR_GP_PLL_DFS_CTRL1_CLR 0x98 +#define FSL_XCVR_GP_PLL_DFS_CTRL1_TOG 0x9C +#define FSL_XCVR_GP_PLL_DFS_DIV1 0xA0 +#define FSL_XCVR_GP_PLL_DFS_DIV1_SET 0xA4 +#define FSL_XCVR_GP_PLL_DFS_DIV1_CLR 0xA8 +#define FSL_XCVR_GP_PLL_DFS_DIV1_TOG 0xAC +#define FSL_XCVR_GP_PLL_DFS_CTRL2 0xB0 +#define FSL_XCVR_GP_PLL_DFS_CTRL2_SET 0xB4 +#define FSL_XCVR_GP_PLL_DFS_CTRL2_CLR 0xB8 +#define FSL_XCVR_GP_PLL_DFS_CTRL2_TOG 0xBC +#define FSL_XCVR_GP_PLL_DFS_DIV2 0xC0 +#define FSL_XCVR_GP_PLL_DFS_DIV2_SET 0xC4 +#define FSL_XCVR_GP_PLL_DFS_DIV2_CLR 0xC8 +#define FSL_XCVR_GP_PLL_DFS_DIV2_TOG 0xCC +#define FSL_XCVR_GP_PLL_DFS_CTRL3 0xD0 +#define FSL_XCVR_GP_PLL_DFS_CTRL3_SET 0xD4 +#define FSL_XCVR_GP_PLL_DFS_CTRL3_CLR 0xD8 +#define FSL_XCVR_GP_PLL_DFS_CTRL3_TOG 0xDC +#define FSL_XCVR_GP_PLL_DFS_DIV3 0xE0 +#define FSL_XCVR_GP_PLL_DFS_DIV3_SET 0xE4 +#define FSL_XCVR_GP_PLL_DFS_DIV3_CLR 0xE8 +#define FSL_XCVR_GP_PLL_DFS_DIV3_TOG 0xEC +#define FSL_XCVR_GP_PLL_STATUS 0xF0 +#define FSL_XCVR_GP_PLL_STATUS_SET 0xF4 +#define FSL_XCVR_GP_PLL_STATUS_CLR 0xF8 +#define FSL_XCVR_GP_PLL_STATUS_TOG 0xFC + +/* GP PLL Control Register */ +#define FSL_XCVR_GP_PLL_CTRL_LBYPASS BIT(31) +#define FSL_XCVR_GP_PLL_CTRL_HCS BIT(16) +#define FSL_XCVR_GP_PLL_CTRL_MSD BIT(12) +#define FSL_XCVR_GP_PLL_CTRL_DITHER_EN3 BIT(11) +#define FSL_XCVR_GP_PLL_CTRL_DITHER_EN2 BIT(10) +#define FSL_XCVR_GP_PLL_CTRL_DITHER_EN1 BIT(9) +#define FSL_XCVR_GP_PLL_CTRL_SPREADCTL BIT(8) +#define FSL_XCVR_GP_PLL_CTRL_CLKMUX_BYPASS BIT(2) +#define FSL_XCVR_GP_PLL_CTRL_CLKMUX_EN BIT(1) +#define FSL_XCVR_GP_PLL_CTRL_POWERUP BIT(0) + +/* GP PLL Numerator Register */ +#define FSL_XCVR_GP_PLL_NUMERATOR_MFN_SHIFT 2 +#define FSL_XCVR_GP_PLL_NUMERATOR_MFN GENMASK(31, 2) + +/* GP PLL Denominator Register */ +#define FSL_XCVR_GP_PLL_DENOMINATOR_MFD GENMASK(29, 0) + +/* GP PLL Dividers Register */ +#define FSL_XCVR_GP_PLL_DIV_MFI_SHIFT 16 +#define FSL_XCVR_GP_PLL_DIV_MFI GENMASK(24, 16) +#define FSL_XCVR_GP_PLL_DIV_RDIV GENMASK(15, 13) +#define FSL_XCVR_GP_PLL_DIV_ODIV GENMASK(7, 0) + #endif /* __FSL_XCVR_H */
On Tue, 14 May 2024 11:12:07 +0800, Shengjiu Wang wrote:
On i.MX95 wakeup domain, there is one instance of Audio XCVR supporting SPDIF mode with a connection to the Audio XCVR physical interface.
changes in v2:
- Merge patch 1&2, 3&4 from v1 together.
- Add more comments in commit message
- Add constaint for clocks used on i.mx95
- Add 'select SND_SOC_FSL_UTILS' for compiling issue.
[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/2] ASoC: dt-bindings: fsl,xcvr: Add compatible string for i.MX95 commit: fc1277335ffa0d180c76ddccf5fe27fc75674e67 [2/2] ASoC: fsl_xcvr: Add support for i.MX95 platform commit: f13b349e3c70320ef5a86edfc888a6feb612abb0
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
participants (4)
-
Mark Brown
-
Rob Herring
-
Shengjiu Wang
-
Shengjiu Wang