[alsa-devel] [PATCH 3/3] ASoC: rt1011: improve readability and remove redundant code
From: Shuming Fan shumingf@realtek.com
1. remove !component->card->instantiated statement in kcontrol 2. goto the end of fucntion if "ret = -EINVAL" in rt1011_set_dai_fmt() 3. fix typo 4. add the range check for temperature_calib from device property 5. remove unnecessary tabs using spaces instead
Signed-off-by: Shuming Fan shumingf@realtek.com --- sound/soc/codecs/rt1011.c | 72 ++++++++++++++++++--------------------- 1 file changed, 34 insertions(+), 38 deletions(-)
diff --git a/sound/soc/codecs/rt1011.c b/sound/soc/codecs/rt1011.c index dcd397a83cb4..10bbdb37d689 100644 --- a/sound/soc/codecs/rt1011.c +++ b/sound/soc/codecs/rt1011.c @@ -61,7 +61,6 @@ static const struct reg_sequence init_list[] = { { RT1011_DAC_SET_1, 0xe702 }, { RT1011_DAC_SET_3, 0x2004 }, }; -#define RT1011_INIT_REG_LEN ARRAY_SIZE(init_list)
static const struct reg_default rt1011_reg[] = { {0x0000, 0x0000}, @@ -684,7 +683,8 @@ static int rt1011_reg_init(struct snd_soc_component *component) { struct rt1011_priv *rt1011 = snd_soc_component_get_drvdata(component);
- regmap_multi_reg_write(rt1011->regmap, init_list, RT1011_INIT_REG_LEN); + regmap_multi_reg_write(rt1011->regmap, + init_list, ARRAY_SIZE(init_list)); return 0; }
@@ -989,7 +989,7 @@ static SOC_ENUM_SINGLE_DECL(rt1011_din_source_enum, RT1011_CROSS_BQ_SET_1, 5,
static const char * const rt1011_tdm_data_out_select[] = { "TDM_O_LR", "BQ1", "DVOL", "BQ10", "ALC", "DMIX", "ADC_SRC_LR", - "ADC_O_LR", "ADC_MONO", "RSPK_BPF_LR", "DMIX_ADD", "ENVELOPE_FS", + "ADC_O_LR", "ADC_MONO", "RSPK_BPF_LR", "DMIX_ADD", "ENVELOPE_FS", "SEP_O_GAIN", "ALC_BK_GAIN", "STP_V_C", "DMIX_ABST" };
@@ -1002,7 +1002,7 @@ static SOC_ENUM_SINGLE_DECL(rt1011_tdm2_l_dac1_enum, RT1011_TDM2_SET_4, 12, rt1011_tdm_l_ch_data_select);
static SOC_ENUM_SINGLE_DECL(rt1011_tdm1_adc1_dat_enum, - RT1011_ADCDAT_OUT_SOURCE, 0, rt1011_tdm_data_out_select); + RT1011_ADCDAT_OUT_SOURCE, 0, rt1011_tdm_data_out_select); static SOC_ENUM_SINGLE_DECL(rt1011_tdm1_adc1_loc_enum, RT1011_TDM1_SET_2, 0, rt1011_tdm_l_ch_data_select);
@@ -1024,9 +1024,9 @@ static const char * const rt1011_tdm_adc_swap_select[] = { "L/R", "R/L", "L/L", "R/R" };
-static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc1_1_enum, RT1011_TDM1_SET_3, 6, +static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc1_1_enum, RT1011_TDM1_SET_3, 6, rt1011_tdm_adc_swap_select); -static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc2_1_enum, RT1011_TDM1_SET_3, 4, +static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc2_1_enum, RT1011_TDM1_SET_3, 4, rt1011_tdm_adc_swap_select);
static void rt1011_reset(struct regmap *regmap) @@ -1092,9 +1092,9 @@ static bool rt1011_validate_bq_drc_coeff(unsigned short reg) { if ((reg == RT1011_DAC_SET_1) | (reg >= RT1011_ADC_SET && reg <= RT1011_ADC_SET_1) | - (reg == RT1011_ADC_SET_4) | (reg == RT1011_ADC_SET_5) | + (reg == RT1011_ADC_SET_4) | (reg == RT1011_ADC_SET_5) | (reg == RT1011_MIXER_1) | - (reg == RT1011_A_TIMING_1) | (reg >= RT1011_POWER_7 && + (reg == RT1011_A_TIMING_1) | (reg >= RT1011_POWER_7 && reg <= RT1011_POWER_8) | (reg == RT1011_CLASS_D_POS) | (reg == RT1011_ANALOG_CTRL) | (reg >= RT1011_SPK_TEMP_PROTECT_0 && @@ -1163,9 +1163,6 @@ static int rt1011_bq_drc_coeff_put(struct snd_kcontrol *kcontrol, (struct rt1011_bq_drc_params *)ucontrol->value.integer.value; unsigned int i, mode_idx = 0;
- if (!component->card->instantiated) - return 0; - if (strstr(ucontrol->id.name, "AdvanceMode Initial Set")) mode_idx = RT1011_ADVMODE_INITIAL_SET; else if (strstr(ucontrol->id.name, "AdvanceMode SEP BQ Coeff")) @@ -1236,9 +1233,6 @@ static int rt1011_r0_cali_put(struct snd_kcontrol *kcontrol, struct snd_soc_component *component = snd_kcontrol_chip(kcontrol); struct rt1011_priv *rt1011 = snd_soc_component_get_drvdata(component);
- if (!component->card->instantiated) - return 0; - rt1011->cali_done = 0; if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF && ucontrol->value.integer.value[0]) @@ -1284,9 +1278,6 @@ static int rt1011_r0_load_mode_put(struct snd_kcontrol *kcontrol, if (ucontrol->value.integer.value[0] == rt1011->r0_reg) return 0;
- if (!component->card->instantiated) - return 0; - if (ucontrol->value.integer.value[0] == 0) return -EINVAL;
@@ -1298,7 +1289,7 @@ static int rt1011_r0_load_mode_put(struct snd_kcontrol *kcontrol, r0_integer = format / rt1011->r0_reg / 128; r0_factor = ((format / rt1011->r0_reg * 100) / 128) - (r0_integer * 100); - dev_info(dev, "New r0 resistance about %d.%02d ohm, reg=0x%X\n", + dev_info(dev, "New r0 resistance about %d.%02d ohm, reg=0x%X\n", r0_integer, r0_factor, rt1011->r0_reg);
if (rt1011->r0_reg) @@ -1640,6 +1631,7 @@ static int rt1011_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) break; default: ret = -EINVAL; + goto _set_fmt_err_; }
switch (fmt & SND_SOC_DAIFMT_INV_MASK) { @@ -1650,6 +1642,7 @@ static int rt1011_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) break; default: ret = -EINVAL; + goto _set_fmt_err_; }
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { @@ -1666,6 +1659,7 @@ static int rt1011_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) break; default: ret = -EINVAL; + goto _set_fmt_err_; }
switch (dai->id) { @@ -1683,6 +1677,7 @@ static int rt1011_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) ret = -EINVAL; }
+_set_fmt_err_: snd_soc_dapm_mutex_unlock(dapm); return ret; } @@ -1778,7 +1773,8 @@ static int rt1011_set_component_pll(struct snd_soc_component *component,
ret = rl6231_pll_calc(freq_in, freq_out, &pll_code); if (ret < 0) { - dev_err(component->dev, "Unsupport input clock %d\n", freq_in); + dev_err(component->dev, "Unsupported input clock %d\n", + freq_in); return ret; }
@@ -1982,14 +1978,14 @@ static int rt1011_set_tdm_slot(struct snd_soc_dai *dai,
snd_soc_component_update_bits(component, RT1011_TDM1_SET_1, RT1011_I2S_CH_TX_MASK | RT1011_I2S_CH_RX_MASK | - RT1011_I2S_CH_TX_LEN_MASK | RT1011_I2S_CH_RX_LEN_MASK, val); + RT1011_I2S_CH_TX_LEN_MASK | RT1011_I2S_CH_RX_LEN_MASK, val); snd_soc_component_update_bits(component, RT1011_TDM2_SET_1, RT1011_I2S_CH_TX_MASK | RT1011_I2S_CH_RX_MASK | - RT1011_I2S_CH_TX_LEN_MASK | RT1011_I2S_CH_RX_LEN_MASK, val); + RT1011_I2S_CH_TX_LEN_MASK | RT1011_I2S_CH_RX_LEN_MASK, val); snd_soc_component_update_bits(component, RT1011_TDM1_SET_2, - RT1011_TDM_I2S_DOCK_EN_1_MASK, tdm_en); + RT1011_TDM_I2S_DOCK_EN_1_MASK, tdm_en); snd_soc_component_update_bits(component, RT1011_TDM2_SET_2, - RT1011_TDM_I2S_DOCK_EN_2_MASK, tdm_en); + RT1011_TDM_I2S_DOCK_EN_2_MASK, tdm_en); if (tx_slotnum) snd_soc_component_update_bits(component, RT1011_TDM_TOTAL_SET, RT1011_ADCDAT1_PIN_CONFIG | RT1011_ADCDAT2_PIN_CONFIG, @@ -2114,7 +2110,7 @@ static const struct snd_soc_component_driver soc_component_dev_rt1011 = { .remove = rt1011_remove, .suspend = rt1011_suspend, .resume = rt1011_resume, - .set_bias_level = rt1011_set_bias_level, + .set_bias_level = rt1011_set_bias_level, .controls = rt1011_snd_controls, .num_controls = ARRAY_SIZE(rt1011_snd_controls), .dapm_widgets = rt1011_dapm_widgets, @@ -2123,9 +2119,9 @@ static const struct snd_soc_component_driver soc_component_dev_rt1011 = { .num_dapm_routes = ARRAY_SIZE(rt1011_dapm_routes), .set_sysclk = rt1011_set_component_sysclk, .set_pll = rt1011_set_component_pll, - .use_pmdown_time = 1, - .endianness = 1, - .non_legacy_dai_naming = 1, + .use_pmdown_time = 1, + .endianness = 1, + .non_legacy_dai_naming = 1, };
static const struct regmap_config rt1011_regmap = { @@ -2227,17 +2223,17 @@ static int rt1011_calibrate(struct rt1011_priv *rt1011, unsigned char cali_flag) dc_offset = value << 16; regmap_read(rt1011->regmap, RT1011_EFUSE_ADC_OFFSET_15_0, &value); dc_offset |= (value & 0xffff); - dev_info(dev, "ADC offset=0x%x\n", dc_offset); + dev_info(dev, "ADC offset=0x%x\n", dc_offset); regmap_read(rt1011->regmap, RT1011_EFUSE_DAC_OFFSET_G0_20_16, &value); dc_offset = value << 16; regmap_read(rt1011->regmap, RT1011_EFUSE_DAC_OFFSET_G0_15_0, &value); dc_offset |= (value & 0xffff); - dev_info(dev, "Gain0 offset=0x%x\n", dc_offset); + dev_info(dev, "Gain0 offset=0x%x\n", dc_offset); regmap_read(rt1011->regmap, RT1011_EFUSE_DAC_OFFSET_G1_20_16, &value); dc_offset = value << 16; regmap_read(rt1011->regmap, RT1011_EFUSE_DAC_OFFSET_G1_15_0, &value); dc_offset |= (value & 0xffff); - dev_info(dev, "Gain1 offset=0x%x\n", dc_offset); + dev_info(dev, "Gain1 offset=0x%x\n", dc_offset);
if (cali_flag) { @@ -2257,7 +2253,7 @@ static int rt1011_calibrate(struct rt1011_priv *rt1011, unsigned char cali_flag) while (count < chk_cnt) { msleep(100); regmap_read(rt1011->regmap, - RT1011_INIT_RECIPROCAL_SYN_24_16, &value); + RT1011_INIT_RECIPROCAL_SYN_24_16, &value); r0[count%3] = value << 16; regmap_read(rt1011->regmap, RT1011_INIT_RECIPROCAL_SYN_15_0, &value); @@ -2272,7 +2268,7 @@ static int rt1011_calibrate(struct rt1011_priv *rt1011, unsigned char cali_flag) break; } if (count > chk_cnt) { - dev_err(dev, "Calibrate R0 Failure\n"); + dev_err(dev, "Calibrate R0 Failure\n"); ret = -EAGAIN; } else { format = 2147483648U; /* 2^24 * 128 */ @@ -2281,7 +2277,7 @@ static int rt1011_calibrate(struct rt1011_priv *rt1011, unsigned char cali_flag) - (r0_integer * 100); rt1011->r0_reg = r0[0]; rt1011->cali_done = 1; - dev_info(dev, "r0 resistance about %d.%02d ohm, reg=0x%X\n", + dev_info(dev, "r0 resistance about %d.%02d ohm, reg=0x%X\n", r0_integer, r0_factor, r0[0]); } } @@ -2346,7 +2342,8 @@ static void rt1011_calibration_work(struct work_struct *work) rt1011_reg_init(component);
/* Apply temperature and calibration data from device property */ - if (rt1011->temperature_calib) { + if (rt1011->temperature_calib <= 0xff && + rt1011->temperature_calib > 0) { snd_soc_component_update_bits(component, RT1011_STP_INITIAL_RESISTANCE_TEMP, 0x3ff, (rt1011->temperature_calib << 2)); @@ -2359,7 +2356,7 @@ static void rt1011_calibration_work(struct work_struct *work) r0_integer = format / rt1011->r0_reg / 128; r0_factor = ((format / rt1011->r0_reg * 100) / 128) - (r0_integer * 100); - dev_info(component->dev, "DP r0 resistance about %d.%02d ohm, reg=0x%X\n", + dev_info(component->dev, "DP r0 resistance about %d.%02d ohm, reg=0x%X\n", r0_integer, r0_factor, rt1011->r0_reg);
rt1011_r0_load(rt1011); @@ -2380,7 +2377,7 @@ static int rt1011_parse_dp(struct rt1011_priv *rt1011, struct device *dev) }
static int rt1011_i2c_probe(struct i2c_client *i2c, - const struct i2c_device_id *id) + const struct i2c_device_id *id) { struct rt1011_priv *rt1011; int ret; @@ -2388,7 +2385,7 @@ static int rt1011_i2c_probe(struct i2c_client *i2c,
rt1011 = devm_kzalloc(&i2c->dev, sizeof(struct rt1011_priv), GFP_KERNEL); - if (rt1011 == NULL) + if (!rt1011) return -ENOMEM;
i2c_set_clientdata(i2c, rt1011); @@ -2425,7 +2422,6 @@ static void rt1011_i2c_shutdown(struct i2c_client *client) rt1011_reset(rt1011->regmap); }
- static struct i2c_driver rt1011_i2c_driver = { .driver = { .name = "rt1011",
On Wed, Oct 30, 2019 at 04:56:17PM +0800, shumingf@realtek.com wrote:
From: Shuming Fan shumingf@realtek.com
- remove !component->card->instantiated statement in kcontrol
- goto the end of fucntion if "ret = -EINVAL" in rt1011_set_dai_fmt()
- fix typo
- add the range check for temperature_calib from device property
- remove unnecessary tabs using spaces instead
These should all be separate changes rather than mixed up into a single change, this makes it much easier to review the changes.
participants (2)
-
Mark Brown
-
shumingf@realtek.com