For the configuration of the automatic volume control block (AVC), which reduces loud signals and amplifies low level signals for easier listening, following controls are added: + AVC Threshold Volume: threshold where audio is compressed when the measured level is above or expanded when below + AVC Max Gain Volume: maximum gain which can be applied when the measured audio level is below threshold + AVC Hard Limiter Switch: when enabled the signal is limited to the programmed threshold. + AVC Integrator Response

These controls use the DAP_AVC_CTRL and DAP_AVC_THRESHOLD registers for configuration.

This patch depends on "ASoC: sgtl5000: add avc enable control"

Following 2 checkpatch.pl strict checks are ignored because the indentation style is different for the struct snd_kcontrol_new definition: patch:144: CHECK: Alignment should match open parenthesis patch:147: CHECK: Alignment should match open parenthesis

Signed-off-by: Richard Leitner richard.leitner@skidata.com --- sound/soc/codecs/sgtl5000.c | 85 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 85 insertions(+)

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 0477f2e..2bb3235 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -74,6 +74,20 @@ static const struct reg_default sgtl5000_reg_defaults[] = { { SGTL5000_DAP_AVC_DECAY, 0x0050 }, };

+/* AVC: Threshold dB -> register: pre-calculated values */ +static const u16 avc_thr_db2reg[97] = { + 0x5168, 0x488E, 0x40AA, 0x39A1, 0x335D, 0x2DC7, 0x28CC, 0x245D, 0x2068, + 0x1CE2, 0x19BE, 0x16F1, 0x1472, 0x1239, 0x103E, 0x0E7A, 0x0CE6, 0x0B7F, + 0x0A3F, 0x0922, 0x0824, 0x0741, 0x0677, 0x05C3, 0x0522, 0x0493, 0x0414, + 0x03A2, 0x033D, 0x02E3, 0x0293, 0x024B, 0x020B, 0x01D2, 0x019F, 0x0172, + 0x014A, 0x0126, 0x0106, 0x00E9, 0x00D0, 0x00B9, 0x00A5, 0x0093, 0x0083, + 0x0075, 0x0068, 0x005D, 0x0052, 0x0049, 0x0041, 0x003A, 0x0034, 0x002E, + 0x0029, 0x0025, 0x0021, 0x001D, 0x001A, 0x0017, 0x0014, 0x0012, 0x0010, + 0x000E, 0x000D, 0x000B, 0x000A, 0x0009, 0x0008, 0x0007, 0x0006, 0x0005, + 0x0005, 0x0004, 0x0004, 0x0003, 0x0003, 0x0002, 0x0002, 0x0002, 0x0002, + 0x0001, 0x0001, 0x0001, 0x0001, 0x0001, 0x0001, 0x0000, 0x0000, 0x0000, + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000}; + /* regulator supplies for sgtl5000, VDDD is an optional external supply */ enum sgtl5000_regulator_supplies { VDDA, @@ -382,6 +396,63 @@ static int dac_put_volsw(struct snd_kcontrol *kcontrol, return 0; }

+/* + * custom function to get AVC threshold + * + * The threshold dB is calculated by rearranging the calculation from the + * avc_put_threshold function: register_value = 10^(dB/20) * 0.636 * 2^15 ==> + * dB = ( fls(register_value) - 14.347 ) * 6.02 + * + * As this calculation is expensive and the threshold dB values may not exeed + * 0 to 96 we use pre-calculated values. + */ +static int avc_get_threshold(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + int db, i; + u16 reg = snd_soc_read(codec, SGTL5000_DAP_AVC_THRESHOLD); + + /* register value 0 => -96dB */ + if (!reg) { + ucontrol->value.integer.value[0] = 96; + ucontrol->value.integer.value[1] = 96; + return 0; + } + + /* get dB from register value (rounded down) */ + for (i = 0; avc_thr_db2reg[i] > reg; i++) + ; + db = i; + + ucontrol->value.integer.value[0] = db; + ucontrol->value.integer.value[1] = db; + + return 0; +} + +/* + * custom function to put AVC threshold + * + * The register value is calculated by following formula: + * register_value = 10^(dB/20) * 0.636 * 2^15 + * As this calculation is expensive and the threshold dB values may not exeed + * 0 to 96 we use pre-calculated values. + */ +static int avc_put_threshold(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + int db; + u16 reg; + + db = clamp((int)ucontrol->value.integer.value[0], 0, 96); + reg = avc_thr_db2reg[db]; + snd_soc_write(codec, SGTL5000_DAP_AVC_THRESHOLD, reg); + + return 0; +} + static const DECLARE_TLV_DB_SCALE(capture_6db_attenuate, -600, 600, 0);

/* tlv for mic gain, 0db 20db 30db 40db */ @@ -396,6 +467,12 @@ static const DECLARE_TLV_DB_SCALE(headphone_volume, -5150, 50, 0); /* tlv for lineout volume, 31 steps of .5db each */ static const DECLARE_TLV_DB_SCALE(lineout_volume, -1550, 50, 0);

+/* tlv for dap avc max gain, 0db, 6db, 12db */ +static const DECLARE_TLV_DB_SCALE(avc_max_gain, 0, 600, 0); + +/* tlv for dap avc threshold, */ +static const DECLARE_TLV_DB_MINMAX(avc_threshold, 0, 9600); + static const struct snd_kcontrol_new sgtl5000_snd_controls[] = { /* SOC_DOUBLE_S8_TLV with invert */ { @@ -435,7 +512,15 @@ static const struct snd_kcontrol_new sgtl5000_snd_controls[] = { lineout_volume), SOC_SINGLE("Lineout Playback Switch", SGTL5000_CHIP_ANA_CTRL, 8, 1, 1),

+ /* Automatic Volume Control (DAP AVC) */ SOC_SINGLE("AVC Enable Switch", SGTL5000_DAP_AVC_CTRL, 0, 1, 0), + SOC_SINGLE("AVC Hard Limiter Switch", SGTL5000_DAP_AVC_CTRL, 5, 1, 0), + SOC_SINGLE_TLV("AVC Max Gain Volume", SGTL5000_DAP_AVC_CTRL, 12, 2, 0, + avc_max_gain), + SOC_SINGLE("AVC Integrator Response", SGTL5000_DAP_AVC_CTRL, 8, 3, 0), + SOC_SINGLE_EXT_TLV("AVC Threshold Volume", SGTL5000_DAP_AVC_THRESHOLD, + 0, 96, 0, avc_get_threshold, avc_put_threshold, + avc_threshold), };

/* mute the codec used by alsa core */