[alsa-devel] [PATCH v2] ASoC: Intel: bytcr_rt5651: Add support for externar amplifier enable GPIO
The rt5651 does not have a built-in speaker amplifier, so it is often used together with an external amplifier. On Cherry Trail boards this external amplifier's enable pin is driven through a GPIO, which is given as the first GPIO in the ACPI resources of the codec fwnode.
This commit adds support to the bytcr_rt5651 for this GPIO, fixing the speaker not working on CHT devices with a rt5651 codec.
Cc: Carlo Caione carlo@endlessm.com Signed-off-by: Hans de Goede hdegoede@redhat.com --- Changes in v2: -Handle the ext amp GPIO entirely in the machine driver, the ext-amp is not part of the codec, so it should not be controlled by the codec driver --- sound/soc/intel/boards/bytcr_rt5651.c | 65 +++++++++++++++++++++++++-- 1 file changed, 62 insertions(+), 3 deletions(-)
diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index d920725ce603..5301205496be 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -26,6 +26,8 @@ #include <linux/clk.h> #include <linux/device.h> #include <linux/dmi.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio/machine.h> #include <linux/slab.h> #include <asm/cpu_device_id.h> #include <asm/intel-family.h> @@ -86,6 +88,7 @@ enum {
struct byt_rt5651_private { struct clk *mclk; + struct gpio_desc *ext_amp_gpio; struct snd_soc_jack jack; };
@@ -208,6 +211,20 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, return 0; }
+static int rt5651_ext_amp_power_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_card *card = w->dapm->card; + struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); + + if (SND_SOC_DAPM_EVENT_ON(event)) + gpiod_set_value_cansleep(priv->ext_amp_gpio, 1); + else + gpiod_set_value_cansleep(priv->ext_amp_gpio, 0); + + return 0; +} + static const struct snd_soc_dapm_widget byt_rt5651_widgets[] = { SND_SOC_DAPM_HP("Headphone", NULL), SND_SOC_DAPM_MIC("Headset Mic", NULL), @@ -217,7 +234,9 @@ static const struct snd_soc_dapm_widget byt_rt5651_widgets[] = { SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, platform_clock_control, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), - + SND_SOC_DAPM_SUPPLY("Ext Amp Power", SND_SOC_NOPM, 0, 0, + rt5651_ext_amp_power_event, + SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU), };
static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = { @@ -225,6 +244,7 @@ static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = { {"Headset Mic", NULL, "Platform Clock"}, {"Internal Mic", NULL, "Platform Clock"}, {"Speaker", NULL, "Platform Clock"}, + {"Speaker", NULL, "Ext Amp Power"}, {"Line In", NULL, "Platform Clock"},
{"Headset Mic", NULL, "micbias1"}, /* lowercase for rt5651 */ @@ -678,6 +698,18 @@ static const struct x86_cpu_id baytrail_cpu_ids[] = { {} };
+static const struct x86_cpu_id cherrytrail_cpu_ids[] = { + { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_AIRMONT }, /* Braswell */ + {} +}; + +static const struct acpi_gpio_params ext_amp_enable_gpios = { 0, 0, false }; + +static const struct acpi_gpio_mapping byt_rt5651_gpios[] = { + { "ext-amp-enable-gpios", &ext_amp_enable_gpios, 1 }, + { }, +}; + struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */ u64 aif_value; /* 1: AIF1, 2: AIF2 */ u64 mclock_value; /* usually 25MHz (0x17d7940), ignored */ @@ -793,9 +825,36 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
/* Must be called before register_card, also see declaration comment. */ ret_val = byt_rt5651_add_codec_device_props(codec_dev); - put_device(codec_dev); - if (ret_val) + if (ret_val) { + put_device(codec_dev); return ret_val; + } + + /* Cherry Trail devices use an external amplifier enable gpio */ + if (x86_match_cpu(cherrytrail_cpu_ids)) { + devm_acpi_dev_add_driver_gpios(codec_dev, byt_rt5651_gpios); + priv->ext_amp_gpio = devm_fwnode_get_index_gpiod_from_child( + &pdev->dev, "ext-amp-enable", 0, + codec_dev->fwnode, + GPIOD_OUT_LOW, "speaker-amp"); + if (IS_ERR(priv->ext_amp_gpio)) { + ret_val = PTR_ERR(priv->ext_amp_gpio); + switch (ret_val) { + case -ENOENT: + priv->ext_amp_gpio = NULL; + break; + default: + dev_err(&pdev->dev, "Failed to get ext-amp-enable GPIO: %d\n", + ret_val); + /* fall through */ + case -EPROBE_DEFER: + put_device(codec_dev); + return ret_val; + } + } + } + + put_device(codec_dev);
log_quirks(&pdev->dev);
Hi,
On 01-07-18 20:31, Hans de Goede wrote:
The rt5651 does not have a built-in speaker amplifier, so it is often used together with an external amplifier. On Cherry Trail boards this external amplifier's enable pin is driven through a GPIO, which is given as the first GPIO in the ACPI resources of the codec fwnode.
This commit adds support to the bytcr_rt5651 for this GPIO, fixing the speaker not working on CHT devices with a rt5651 codec.
Cc: Carlo Caione carlo@endlessm.com Signed-off-by: Hans de Goede hdegoede@redhat.com
Self nack, I forgot that I did 2 preparation patches for this and I should have send out the whole set not just the final patch.
I will resend this as part of a set shortly.
Regards,
Hans
Changes in v2: -Handle the ext amp GPIO entirely in the machine driver, the ext-amp is not part of the codec, so it should not be controlled by the codec driver
sound/soc/intel/boards/bytcr_rt5651.c | 65 +++++++++++++++++++++++++-- 1 file changed, 62 insertions(+), 3 deletions(-)
diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index d920725ce603..5301205496be 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -26,6 +26,8 @@ #include <linux/clk.h> #include <linux/device.h> #include <linux/dmi.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio/machine.h> #include <linux/slab.h> #include <asm/cpu_device_id.h> #include <asm/intel-family.h> @@ -86,6 +88,7 @@ enum {
struct byt_rt5651_private { struct clk *mclk;
- struct gpio_desc *ext_amp_gpio; struct snd_soc_jack jack; };
@@ -208,6 +211,20 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, return 0; }
+static int rt5651_ext_amp_power_event(struct snd_soc_dapm_widget *w,
- struct snd_kcontrol *kcontrol, int event)
+{
- struct snd_soc_card *card = w->dapm->card;
- struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card);
- if (SND_SOC_DAPM_EVENT_ON(event))
gpiod_set_value_cansleep(priv->ext_amp_gpio, 1);- else
gpiod_set_value_cansleep(priv->ext_amp_gpio, 0);- return 0;
+}
- static const struct snd_soc_dapm_widget byt_rt5651_widgets[] = { SND_SOC_DAPM_HP("Headphone", NULL), SND_SOC_DAPM_MIC("Headset Mic", NULL),
@@ -217,7 +234,9 @@ static const struct snd_soc_dapm_widget byt_rt5651_widgets[] = { SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, platform_clock_control, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
SND_SOC_DAPM_SUPPLY("Ext Amp Power", SND_SOC_NOPM, 0, 0,
rt5651_ext_amp_power_event,SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU),};
static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = {
@@ -225,6 +244,7 @@ static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = { {"Headset Mic", NULL, "Platform Clock"}, {"Internal Mic", NULL, "Platform Clock"}, {"Speaker", NULL, "Platform Clock"},
{"Speaker", NULL, "Ext Amp Power"}, {"Line In", NULL, "Platform Clock"},
{"Headset Mic", NULL, "micbias1"}, /* lowercase for rt5651 */
@@ -678,6 +698,18 @@ static const struct x86_cpu_id baytrail_cpu_ids[] = { {} };
+static const struct x86_cpu_id cherrytrail_cpu_ids[] = {
- { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_AIRMONT }, /* Braswell */
- {}
+};
+static const struct acpi_gpio_params ext_amp_enable_gpios = { 0, 0, false };
+static const struct acpi_gpio_mapping byt_rt5651_gpios[] = {
- { "ext-amp-enable-gpios", &ext_amp_enable_gpios, 1 },
- { },
+};
- struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */ u64 aif_value; /* 1: AIF1, 2: AIF2 */ u64 mclock_value; /* usually 25MHz (0x17d7940), ignored */
@@ -793,9 +825,36 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
/* Must be called before register_card, also see declaration comment. */ ret_val = byt_rt5651_add_codec_device_props(codec_dev);
- put_device(codec_dev);
- if (ret_val)
if (ret_val) {
put_device(codec_dev);return ret_val;
}
/* Cherry Trail devices use an external amplifier enable gpio */
if (x86_match_cpu(cherrytrail_cpu_ids)) {
devm_acpi_dev_add_driver_gpios(codec_dev, byt_rt5651_gpios);priv->ext_amp_gpio = devm_fwnode_get_index_gpiod_from_child(&pdev->dev, "ext-amp-enable", 0,codec_dev->fwnode,GPIOD_OUT_LOW, "speaker-amp");if (IS_ERR(priv->ext_amp_gpio)) {ret_val = PTR_ERR(priv->ext_amp_gpio);switch (ret_val) {case -ENOENT:priv->ext_amp_gpio = NULL;break;default:dev_err(&pdev->dev, "Failed to get ext-amp-enable GPIO: %d\n",ret_val);/* fall through */case -EPROBE_DEFER:put_device(codec_dev);return ret_val;}}}
put_device(codec_dev);
log_quirks(&pdev->dev);
The patch
ASoC: Intel: bytcr_rt5651: Add support for externar amplifier enable GPIO
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 5f6fb23d2e114506ddb8437a3e65f4a20d081013 Mon Sep 17 00:00:00 2001
From: Hans de Goede hdegoede@redhat.com Date: Sun, 1 Jul 2018 20:36:31 +0200 Subject: [PATCH] ASoC: Intel: bytcr_rt5651: Add support for externar amplifier enable GPIO
The rt5651 does not have a built-in speaker amplifier, so it is often used together with an external amplifier. On Cherry Trail boards this external amplifier's enable pin is driven through a GPIO, which is given as the first GPIO in the ACPI resources of the codec fwnode.
This commit adds support to the bytcr_rt5651 for this GPIO, fixing the speaker not working on CHT devices with a rt5651 codec.
Cc: Carlo Caione carlo@endlessm.com Signed-off-by: Hans de Goede hdegoede@redhat.com Acked-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/intel/boards/bytcr_rt5651.c | 65 +++++++++++++++++++++++++-- 1 file changed, 62 insertions(+), 3 deletions(-)
diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index d920725ce603..5301205496be 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -26,6 +26,8 @@ #include <linux/clk.h> #include <linux/device.h> #include <linux/dmi.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio/machine.h> #include <linux/slab.h> #include <asm/cpu_device_id.h> #include <asm/intel-family.h> @@ -86,6 +88,7 @@ enum {
struct byt_rt5651_private { struct clk *mclk; + struct gpio_desc *ext_amp_gpio; struct snd_soc_jack jack; };
@@ -208,6 +211,20 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, return 0; }
+static int rt5651_ext_amp_power_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_card *card = w->dapm->card; + struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); + + if (SND_SOC_DAPM_EVENT_ON(event)) + gpiod_set_value_cansleep(priv->ext_amp_gpio, 1); + else + gpiod_set_value_cansleep(priv->ext_amp_gpio, 0); + + return 0; +} + static const struct snd_soc_dapm_widget byt_rt5651_widgets[] = { SND_SOC_DAPM_HP("Headphone", NULL), SND_SOC_DAPM_MIC("Headset Mic", NULL), @@ -217,7 +234,9 @@ static const struct snd_soc_dapm_widget byt_rt5651_widgets[] = { SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, platform_clock_control, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), - + SND_SOC_DAPM_SUPPLY("Ext Amp Power", SND_SOC_NOPM, 0, 0, + rt5651_ext_amp_power_event, + SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU), };
static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = { @@ -225,6 +244,7 @@ static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = { {"Headset Mic", NULL, "Platform Clock"}, {"Internal Mic", NULL, "Platform Clock"}, {"Speaker", NULL, "Platform Clock"}, + {"Speaker", NULL, "Ext Amp Power"}, {"Line In", NULL, "Platform Clock"},
{"Headset Mic", NULL, "micbias1"}, /* lowercase for rt5651 */ @@ -678,6 +698,18 @@ static const struct x86_cpu_id baytrail_cpu_ids[] = { {} };
+static const struct x86_cpu_id cherrytrail_cpu_ids[] = { + { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_AIRMONT }, /* Braswell */ + {} +}; + +static const struct acpi_gpio_params ext_amp_enable_gpios = { 0, 0, false }; + +static const struct acpi_gpio_mapping byt_rt5651_gpios[] = { + { "ext-amp-enable-gpios", &ext_amp_enable_gpios, 1 }, + { }, +}; + struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */ u64 aif_value; /* 1: AIF1, 2: AIF2 */ u64 mclock_value; /* usually 25MHz (0x17d7940), ignored */ @@ -793,9 +825,36 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
/* Must be called before register_card, also see declaration comment. */ ret_val = byt_rt5651_add_codec_device_props(codec_dev); - put_device(codec_dev); - if (ret_val) + if (ret_val) { + put_device(codec_dev); return ret_val; + } + + /* Cherry Trail devices use an external amplifier enable gpio */ + if (x86_match_cpu(cherrytrail_cpu_ids)) { + devm_acpi_dev_add_driver_gpios(codec_dev, byt_rt5651_gpios); + priv->ext_amp_gpio = devm_fwnode_get_index_gpiod_from_child( + &pdev->dev, "ext-amp-enable", 0, + codec_dev->fwnode, + GPIOD_OUT_LOW, "speaker-amp"); + if (IS_ERR(priv->ext_amp_gpio)) { + ret_val = PTR_ERR(priv->ext_amp_gpio); + switch (ret_val) { + case -ENOENT: + priv->ext_amp_gpio = NULL; + break; + default: + dev_err(&pdev->dev, "Failed to get ext-amp-enable GPIO: %d\n", + ret_val); + /* fall through */ + case -EPROBE_DEFER: + put_device(codec_dev); + return ret_val; + } + } + } + + put_device(codec_dev);
log_quirks(&pdev->dev);
participants (2)
-
Hans de Goede -
Mark Brown