Add support for OMAP4 Digital Microphone interface.

Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com --- sound/soc/omap/Kconfig | 3 + sound/soc/omap/Makefile | 2 + sound/soc/omap/omap-dmic.c | 549 ++++++++++++++++++++++++++++++++++++++++++++ sound/soc/omap/omap-dmic.h | 69 ++++++ 4 files changed, 623 insertions(+), 0 deletions(-) create mode 100644 sound/soc/omap/omap-dmic.c create mode 100644 sound/soc/omap/omap-dmic.h

diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig index fe83d0d..052254a 100644 --- a/sound/soc/omap/Kconfig +++ b/sound/soc/omap/Kconfig @@ -2,6 +2,9 @@ config SND_OMAP_SOC tristate "SoC Audio for the Texas Instruments OMAP chips" depends on ARCH_OMAP

+config SND_OMAP_SOC_DMIC + tristate + config SND_OMAP_SOC_MCBSP tristate select OMAP_MCBSP diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile index 052fd75..1fd723f 100644 --- a/sound/soc/omap/Makefile +++ b/sound/soc/omap/Makefile @@ -1,10 +1,12 @@ # OMAP Platform Support snd-soc-omap-objs := omap-pcm.o +snd-soc-omap-dmic-objs := omap-dmic.o snd-soc-omap-mcbsp-objs := omap-mcbsp.o snd-soc-omap-mcpdm-objs := omap-mcpdm.o snd-soc-omap-hdmi-objs := omap-hdmi.o

obj-$(CONFIG_SND_OMAP_SOC) += snd-soc-omap.o +obj-$(CONFIG_SND_OMAP_SOC_DMIC) += snd-soc-omap-dmic.o obj-$(CONFIG_SND_OMAP_SOC_MCBSP) += snd-soc-omap-mcbsp.o obj-$(CONFIG_SND_OMAP_SOC_MCPDM) += snd-soc-omap-mcpdm.o obj-$(CONFIG_SND_OMAP_SOC_HDMI) += snd-soc-omap-hdmi.o diff --git a/sound/soc/omap/omap-dmic.c b/sound/soc/omap/omap-dmic.c new file mode 100644 index 0000000..9c73c0c --- /dev/null +++ b/sound/soc/omap/omap-dmic.c @@ -0,0 +1,549 @@ +/* + * omap-dmic.c -- OMAP ASoC DMIC DAI driver + * + * Copyright (C) 2010 - 2011 Texas Instruments + * + * Author: David Lambert dlambert@ti.com + * Misael Lopez Cruz misael.lopez@ti.com + * Liam Girdwood lrg@ti.com + * Peter Ujfalusi peter.ujfalusi@ti.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/pm_runtime.h> +#include <plat/dma.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/soc.h> + +#include "omap-pcm.h" +#include "omap-dmic.h" + +struct omap_dmic { + struct device *dev; + void __iomem *io_base; + struct clk *fclk; + int fclk_freq; + int out_freq; + int clk_div; + int sysclk; + int threshold; + u32 ch_enabled; + bool active; + struct mutex mutex; +}; + +/* + * Stream DMA parameters + */ +static struct omap_pcm_dma_data omap_dmic_dai_dma_params = { + .name = "DMIC capture", + .data_type = OMAP_DMA_DATA_TYPE_S32, + .sync_mode = OMAP_DMA_SYNC_PACKET, +}; + +static inline void omap_dmic_write(struct omap_dmic *dmic, u16 reg, u32 val) +{ + __raw_writel(val, dmic->io_base + reg); +} + +static inline int omap_dmic_read(struct omap_dmic *dmic, u16 reg) +{ + return __raw_readl(dmic->io_base + reg); +} + +static inline void omap_dmic_start(struct omap_dmic *dmic) +{ + u32 ctrl = omap_dmic_read(dmic, OMAP_DMIC_CTRL_REG); + + /* Configure DMA controller */ + omap_dmic_write(dmic, OMAP_DMIC_DMAENABLE_SET_REG, + OMAP_DMIC_DMA_ENABLE); + + omap_dmic_write(dmic, OMAP_DMIC_CTRL_REG, ctrl | dmic->ch_enabled); +} + +static inline void omap_dmic_stop(struct omap_dmic *dmic) +{ + u32 ctrl = omap_dmic_read(dmic, OMAP_DMIC_CTRL_REG); + omap_dmic_write(dmic, OMAP_DMIC_CTRL_REG, + ctrl & ~OMAP_DMIC_UP_ENABLE_MASK); + + /* Disable DMA request generation */ + omap_dmic_write(dmic, OMAP_DMIC_DMAENABLE_CLR_REG, + OMAP_DMIC_DMA_ENABLE); + +} + +static inline int dmic_is_enabled(struct omap_dmic *dmic) +{ + return omap_dmic_read(dmic, OMAP_DMIC_CTRL_REG) & + OMAP_DMIC_UP_ENABLE_MASK; +} + +static int omap_dmic_dai_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai); + int ret = 0; + + mutex_lock(&dmic->mutex); + + if (!dai->active) { + pm_runtime_get_sync(dmic->dev); + snd_pcm_hw_constraint_msbits(substream->runtime, 0, 32, 24); + dmic->active = 1; + } else { + ret = -EBUSY; + } + + mutex_unlock(&dmic->mutex); + + return ret; +} + +static void omap_dmic_dai_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai); + + mutex_lock(&dmic->mutex); + + if (!dai->active) { + pm_runtime_put_sync(dmic->dev); + dmic->active = 0; + } + + mutex_unlock(&dmic->mutex); +} + +static int omap_dmic_select_divider(struct omap_dmic *dmic, int sample_rate) +{ + int divider = -EINVAL; + + /* + * 192KHz rate is only supported with 19.2MHz/3.84MHz clock + * configuration. + */ + if (sample_rate == 192000) { + if (dmic->fclk_freq == 19200000 && dmic->out_freq == 3840000) + divider = 0x6; /* Divider: 5 (192KHz sampling rate) */ + else + dev_err(dmic->dev, + "invalid clock configuration for 192KHz\n"); + + return divider; + } + + switch (dmic->out_freq) { + case 1536000: + if (dmic->fclk_freq != 24576000) + goto div_err; + divider = 0x4; /* Divider: 16 */ + break; + case 2400000: + switch (dmic->fclk_freq) { + case 12000000: + divider = 0x5; /* Divider: 5 */ + break; + case 19200000: + divider = 0x0; /* Divider: 8 */ + break; + case 24000000: + divider = 0x2; /* Divider: 10 */ + break; + default: + goto div_err; + } + break; + case 3072000: + if (dmic->fclk_freq != 24576000) + goto div_err; + divider = 0x3; /* Divider: 8 */ + break; + case 3840000: + if (dmic->fclk_freq != 19200000) + goto div_err; + divider = 0x1; /* Divider: 5 (96KHz sampling rate) */ + break; + default: + dev_err(dmic->dev, "invalid out frequency: %dHz\n", + dmic->out_freq); + break; + } + + return divider; + +div_err: + dev_err(dmic->dev, "invalid out frequency %dHz for %dHz input\n", + dmic->out_freq, dmic->fclk_freq); + return -EINVAL; +} + +static int omap_dmic_dai_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai); + int channels; + + dmic->clk_div = omap_dmic_select_divider(dmic, params_rate(params)); + if (dmic->clk_div < 0) { + dev_err(dmic->dev, "no valid divider for %dHz from %dHz\n", + dmic->out_freq, dmic->fclk_freq); + return -EINVAL; + } + + dmic->ch_enabled = 0; + channels = params_channels(params); + switch (channels) { + case 6: + dmic->ch_enabled |= OMAP_DMIC_UP3_ENABLE; + case 4: + dmic->ch_enabled |= OMAP_DMIC_UP2_ENABLE; + case 2: + dmic->ch_enabled |= OMAP_DMIC_UP1_ENABLE; + break; + default: + dev_err(dmic->dev, "invalid number of legacy channels\n"); + return -EINVAL; + } + + /* packet size is threshold * channels */ + omap_dmic_dai_dma_params.packet_size = dmic->threshold * channels; + snd_soc_dai_set_dma_data(dai, substream, &omap_dmic_dai_dma_params); + + return 0; +} + +static int omap_dmic_dai_prepare(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai); + u32 ctrl; + + /* Configure uplink threshold */ + omap_dmic_write(dmic, OMAP_DMIC_FIFO_CTRL_REG, dmic->threshold); + + ctrl = omap_dmic_read(dmic, OMAP_DMIC_CTRL_REG); + + /* Set dmic out format */ + ctrl &= ~(OMAP_DMIC_FORMAT | OMAP_DMIC_POLAR_MASK); + ctrl |= (OMAP_DMICOUTFORMAT_LJUST | OMAP_DMIC_POLAR1 | + OMAP_DMIC_POLAR2 | OMAP_DMIC_POLAR3); + + /* Configure dmic clock divider */ + ctrl &= ~OMAP_DMIC_CLK_DIV_MASK; + ctrl |= OMAP_DMIC_CLK_DIV(dmic->clk_div); + + omap_dmic_write(dmic, OMAP_DMIC_CTRL_REG, ctrl); + + omap_dmic_write(dmic, OMAP_DMIC_CTRL_REG, + ctrl | OMAP_DMICOUTFORMAT_LJUST | OMAP_DMIC_POLAR1 | + OMAP_DMIC_POLAR2 | OMAP_DMIC_POLAR3); + + return 0; +} + +static int omap_dmic_dai_trigger(struct snd_pcm_substream *substream, + int cmd, struct snd_soc_dai *dai) +{ + struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + omap_dmic_start(dmic); + break; + case SNDRV_PCM_TRIGGER_STOP: + omap_dmic_stop(dmic); + break; + default: + break; + } + + return 0; +} + +static int omap_dmic_select_fclk(struct omap_dmic *dmic, int clk_id, + unsigned int freq) +{ + struct clk *parent_clk; + char *parent_clk_name; + int ret = 0; + + switch (freq) { + case 12000000: + case 19200000: + case 24000000: + case 24576000: + break; + default: + dev_err(dmic->dev, "invalid input frequency: %dHz\n", freq); + dmic->fclk_freq = 0; + return -EINVAL; + } + + if (dmic->sysclk == clk_id) { + dmic->fclk_freq = freq; + return 0; + } + + /* re-parent not allowed if a stream is ongoing */ + if (dmic->active && dmic_is_enabled(dmic)) { + dev_err(dmic->dev, "can't re-parent when DMIC active\n"); + return -EBUSY; + } + + switch (clk_id) { + case OMAP_DMIC_SYSCLK_PAD_CLKS: + parent_clk_name = "pad_clks_ck"; + break; + case OMAP_DMIC_SYSCLK_SLIMBLUS_CLKS: + parent_clk_name = "slimbus_clk"; + break; + case OMAP_DMIC_SYSCLK_SYNC_MUX_CLKS: + parent_clk_name = "dmic_sync_mux_ck"; + break; + default: + dev_err(dmic->dev, "fclk clk_id (%d) not supported\n", clk_id); + return -EINVAL; + } + + parent_clk = clk_get(dmic->dev, parent_clk_name); + if (IS_ERR(parent_clk)) { + dev_err(dmic->dev, "can't get %s\n", parent_clk_name); + return -ENODEV; + } + + mutex_lock(&dmic->mutex); + if (dmic->active) { + /* disable clock while reparenting */ + pm_runtime_put_sync(dmic->dev); + ret = clk_set_parent(dmic->fclk, parent_clk); + pm_runtime_get_sync(dmic->dev); + } else { + ret = clk_set_parent(dmic->fclk, parent_clk); + } + mutex_unlock(&dmic->mutex); + + if (ret < 0) { + dev_err(dmic->dev, "re-parent failed\n"); + goto err_busy; + } + + dmic->sysclk = clk_id; + dmic->fclk_freq = freq; + +err_busy: + clk_put(parent_clk); + + return ret; +} + +static int omap_dmic_select_outclk(struct omap_dmic *dmic, int clk_id, + unsigned int freq) +{ + int ret = 0; + + if (clk_id != OMAP_DMIC_ABE_DMIC_CLK) { + dev_err(dmic->dev, "output clk_id (%d) not supported\n", + clk_id); + return -EINVAL; + } + + switch (freq) { + case 1536000: + case 2400000: + case 3072000: + case 3840000: + dmic->out_freq = freq; + break; + default: + dev_err(dmic->dev, "invalid out frequency: %dHz\n", freq); + dmic->out_freq = 0; + ret = -EINVAL; + } + + return ret; +} + +static int omap_dmic_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, + unsigned int freq, int dir) +{ + struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai); + + if (dir == SND_SOC_CLOCK_IN) + return omap_dmic_select_fclk(dmic, clk_id, freq); + else if (dir == SND_SOC_CLOCK_OUT) + return omap_dmic_select_outclk(dmic, clk_id, freq); + + dev_err(dmic->dev, "invalid clock direction (%d)\n", dir); + return -EINVAL; +} + +static const struct snd_soc_dai_ops omap_dmic_dai_ops = { + .startup = omap_dmic_dai_startup, + .shutdown = omap_dmic_dai_shutdown, + .hw_params = omap_dmic_dai_hw_params, + .prepare = omap_dmic_dai_prepare, + .trigger = omap_dmic_dai_trigger, + .set_sysclk = omap_dmic_set_dai_sysclk, +}; + +static int omap_dmic_probe(struct snd_soc_dai *dai) +{ + struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai); + + pm_runtime_enable(dmic->dev); + + /* Disable lines while request is ongoing */ + pm_runtime_get_sync(dmic->dev); + omap_dmic_write(dmic, OMAP_DMIC_CTRL_REG, 0x00); + pm_runtime_put_sync(dmic->dev); + + /* Configure DMIC threshold value */ + dmic->threshold = OMAP_DMIC_THRES_MAX - 3; + return 0; +} + +static int omap_dmic_remove(struct snd_soc_dai *dai) +{ + struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai); + + pm_runtime_disable(dmic->dev); + + return 0; +} + +static struct snd_soc_dai_driver omap_dmic_dai = { + .name = "omap-dmic", + .probe = omap_dmic_probe, + .remove = omap_dmic_remove, + .capture = { + .channels_min = 2, + .channels_max = 6, + .rates = SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S32_LE, + }, + .ops = &omap_dmic_dai_ops, +}; + +static __devinit int asoc_dmic_probe(struct platform_device *pdev) +{ + struct omap_dmic *dmic; + struct resource *res; + int ret; + + dmic = devm_kzalloc(&pdev->dev, sizeof(struct omap_dmic), GFP_KERNEL); + if (!dmic) + return -ENOMEM; + + platform_set_drvdata(pdev, dmic); + dmic->dev = &pdev->dev; + dmic->sysclk = OMAP_DMIC_SYSCLK_SYNC_MUX_CLKS; + + mutex_init(&dmic->mutex); + + dmic->fclk = clk_get(dmic->dev, "dmic_fck"); + if (IS_ERR(dmic->fclk)) { + dev_err(dmic->dev, "cant get dmic_fck\n"); + return -ENODEV; + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dma"); + if (!res) { + dev_err(dmic->dev, "invalid dma memory resource\n"); + ret = -ENODEV; + goto err_put_clk; + } + omap_dmic_dai_dma_params.port_addr = res->start + OMAP_DMIC_DATA_REG; + + res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (!res) { + dev_err(dmic->dev, "invalid dma resource\n"); + ret = -ENODEV; + goto err_put_clk; + } + omap_dmic_dai_dma_params.dma_req = res->start; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mpu"); + if (!res) { + dev_err(dmic->dev, "invalid memory resource\n"); + ret = -ENODEV; + goto err_put_clk; + } + + if (!devm_request_mem_region(&pdev->dev, res->start, + resource_size(res), pdev->name)) { + dev_err(dmic->dev, "memory region already claimed\n"); + ret = -ENODEV; + goto err_put_clk; + } + + dmic->io_base = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + if (!dmic->io_base) { + ret = -ENOMEM; + goto err_put_clk; + } + + ret = snd_soc_register_dai(&pdev->dev, &omap_dmic_dai); + if (ret) + goto err_put_clk; + + return 0; + +err_put_clk: + clk_put(dmic->fclk); + return ret; +} + +static int __devexit asoc_dmic_remove(struct platform_device *pdev) +{ + struct omap_dmic *dmic = platform_get_drvdata(pdev); + + snd_soc_unregister_dai(&pdev->dev); + clk_put(dmic->fclk); + + return 0; +} + +static struct platform_driver asoc_dmic_driver = { + .driver = { + .name = "omap-dmic", + .owner = THIS_MODULE, + }, + .probe = asoc_dmic_probe, + .remove = __devexit_p(asoc_dmic_remove), +}; + +module_platform_driver(asoc_dmic_driver); + +MODULE_ALIAS("platform:omap-dmic"); +MODULE_AUTHOR("Peter Ujfalusi peter.ujfalusi@ti.com"); +MODULE_DESCRIPTION("OMAP DMIC ASoC Interface"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/omap/omap-dmic.h b/sound/soc/omap/omap-dmic.h new file mode 100644 index 0000000..231e728 --- /dev/null +++ b/sound/soc/omap/omap-dmic.h @@ -0,0 +1,69 @@ +/* + * omap-dmic.h -- OMAP Digital Microphone Controller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _OMAP_DMIC_H +#define _OMAP_DMIC_H + +#define OMAP_DMIC_REVISION_REG 0x00 +#define OMAP_DMIC_SYSCONFIG_REG 0x10 +#define OMAP_DMIC_IRQSTATUS_RAW_REG 0x24 +#define OMAP_DMIC_IRQSTATUS_REG 0x28 +#define OMAP_DMIC_IRQENABLE_SET_REG 0x2C +#define OMAP_DMIC_IRQENABLE_CLR_REG 0x30 +#define OMAP_DMIC_IRQWAKE_EN_REG 0x34 +#define OMAP_DMIC_DMAENABLE_SET_REG 0x38 +#define OMAP_DMIC_DMAENABLE_CLR_REG 0x3C +#define OMAP_DMIC_DMAWAKEEN_REG 0x40 +#define OMAP_DMIC_CTRL_REG 0x44 +#define OMAP_DMIC_DATA_REG 0x48 +#define OMAP_DMIC_FIFO_CTRL_REG 0x4C +#define OMAP_DMIC_FIFO_DMIC1R_DATA_REG 0x50 +#define OMAP_DMIC_FIFO_DMIC1L_DATA_REG 0x54 +#define OMAP_DMIC_FIFO_DMIC2R_DATA_REG 0x58 +#define OMAP_DMIC_FIFO_DMIC2L_DATA_REG 0x5C +#define OMAP_DMIC_FIFO_DMIC3R_DATA_REG 0x60 +#define OMAP_DMIC_FIFO_DMIC3L_DATA_REG 0x64 + +/* IRQSTATUS_RAW, IRQSTATUS, IRQENABLE_SET, IRQENABLE_CLR bit fields */ +#define OMAP_DMIC_IRQ (1 << 0) +#define OMAP_DMIC_IRQ_FULL (1 << 1) +#define OMAP_DMIC_IRQ_ALMST_EMPTY (1 << 2) +#define OMAP_DMIC_IRQ_EMPTY (1 << 3) +#define OMAP_DMIC_IRQ_MASK 0x07 + +/* DMIC_DMAENABLE bit fields */ +#define OMAP_DMIC_DMA_ENABLE 0x1 + +/* DMIC_CTRL bit fields */ +#define OMAP_DMIC_UP1_ENABLE (1 << 0) +#define OMAP_DMIC_UP2_ENABLE (1 << 1) +#define OMAP_DMIC_UP3_ENABLE (1 << 2) +#define OMAP_DMIC_UP_ENABLE_MASK 0x7 +#define OMAP_DMIC_FORMAT (1 << 3) +#define OMAP_DMIC_POLAR1 (1 << 4) +#define OMAP_DMIC_POLAR2 (1 << 5) +#define OMAP_DMIC_POLAR3 (1 << 6) +#define OMAP_DMIC_POLAR_MASK (0x7 << 4) +#define OMAP_DMIC_CLK_DIV(x) (((x) & 0x7) << 7) +#define OMAP_DMIC_CLK_DIV_MASK (0x7 << 7) +#define OMAP_DMIC_RESET (1 << 10) + +#define OMAP_DMICOUTFORMAT_LJUST (0 << 3) +#define OMAP_DMICOUTFORMAT_RJUST (1 << 3) + +/* DMIC_FIFO_CTRL bit fields */ +#define OMAP_DMIC_THRES_MAX 0xF + +enum omap_dmic_clk { + OMAP_DMIC_SYSCLK_PAD_CLKS, /* PAD_CLKS */ + OMAP_DMIC_SYSCLK_SLIMBLUS_CLKS, /* SLIMBUS_CLK */ + OMAP_DMIC_SYSCLK_SYNC_MUX_CLKS, /* DMIC_SYNC_MUX_CLK */ + OMAP_DMIC_ABE_DMIC_CLK, /* abe_dmic_clk */ +}; + +#endif

Add platform device registration for OMAP4 DMIC.

Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com --- arch/arm/mach-omap2/devices.c | 22 ++++++++++++++++++++++ 1 files changed, 22 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index c15cfad..35d5dff 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -336,6 +336,27 @@ static void omap_init_mcpdm(void) static inline void omap_init_mcpdm(void) {} #endif

+#if defined(CONFIG_SND_OMAP_SOC_DMIC) || \ + defined(CONFIG_SND_OMAP_SOC_DMIC_MODULE) + +static void omap_init_dmic(void) +{ + struct omap_hwmod *oh; + struct platform_device *pdev; + + oh = omap_hwmod_lookup("dmic"); + if (!oh) { + printk(KERN_ERR "Could not look up mcpdm hw_mod\n"); + return; + } + + pdev = omap_device_build("omap-dmic", -1, oh, NULL, 0, NULL, 0, 0); + WARN(IS_ERR(pdev), "Can't build omap_device for omap-dmic.\n"); +} +#else +static inline void omap_init_dmic(void) {} +#endif + #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)

#include <plat/mcspi.h> @@ -681,6 +702,7 @@ static int __init omap2_init_devices(void) */ omap_init_audio(); omap_init_mcpdm(); + omap_init_dmic(); omap_init_camera(); omap_init_mbox(); omap_init_mcspi();

OMAP4 SDP/Blaze boards have onboard digital microphones. Register the platform device for the dmic-codec to be able to use the microphones.

Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com --- arch/arm/mach-omap2/board-4430sdp.c | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 5156468..503bf28 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -372,11 +372,17 @@ static struct platform_device sdp4430_vbat = { }, };

+static struct platform_device sdp4430_dmic_codec = { + .name = "dmic-codec", + .id = -1, +}; + static struct platform_device *sdp4430_devices[] __initdata = { &sdp4430_gpio_keys_device, &sdp4430_leds_gpio, &sdp4430_leds_pwm, &sdp4430_vbat, + &sdp4430_dmic_codec, };

static struct omap_musb_board_data musb_board_data = {