At Wed, 4 Sep 2013 16:37:12 -0400, mengdong.lin@intel.com wrote:

From: Mengdong Lin mengdong.lin@intel.com

When Gfx driver reconnects a port and transcoder, the pin amplifier will be muted. To enable sound, the pin amp need to be unmuted.

This patch

• moves pin amp unmuting from stream preparing to hdmi_setup_audio_infoframe(). So if port:transcoder reconnection happens during stream playback, the ELDV unsol event can stil trigger pin's amp unmuting when re-setting up audio info frame.

• remove reading pin amp status before unmuting for speed-up, since pin amp should always be unmuted.

• rename haswell_verify_pin_D0() to haswell_verify_D0(), since the convertor power state is also fixed here.

This patch is mostly based on suggestion of David Henningsson.

Cc: David Henningsson david.henningsson@canonical.com Signed-off-by: Mengdong Lin mengdong.lin@intel.com

David, could you check this one whether it still works?

This is not so intrusive change, so I'd like to merge it for 3.12 once when confirmed that it doesn't regress.

thanks,

Takashi

diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 974b55c..3d8cd044 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -896,6 +896,11 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec, if (!channels) return;

• if (is_haswell(codec))

• snd_hda_codec_write(codec, pin_nid, 0,
  

• 			    AC_VERB_SET_AMP_GAIN_MUTE,
  

• 			    AMP_OUT_UNMUTE);
  

• eld = &per_pin->sink_eld; if (!eld->monitor_present) return;

@@ -1035,10 +1040,10 @@ static void hdmi_unsol_event(struct hda_codec *codec, unsigned int res) hdmi_non_intrinsic_event(codec, res); }

-static void haswell_verify_pin_D0(struct hda_codec *codec, +static void haswell_verify_D0(struct hda_codec *codec, hda_nid_t cvt_nid, hda_nid_t nid) {

• int pwr, lamp, ramp;

• int pwr;

  /* For Haswell, the converter 1/2 may keep in D3 state after bootup,

  • thus pins could only choose converter 0 for use. Make sure the

@@ -1054,25 +1059,6 @@ static void haswell_verify_pin_D0(struct hda_codec *codec, pwr = (pwr & AC_PWRST_ACTUAL) >> AC_PWRST_ACTUAL_SHIFT; snd_printd("Haswell HDMI audio: Power for pin 0x%x is now D%d\n", nid, pwr); }

• lamp = snd_hda_codec_read(codec, nid, 0,

• 		  AC_VERB_GET_AMP_GAIN_MUTE,
  

• 		  AC_AMP_GET_LEFT | AC_AMP_GET_OUTPUT);
  

• ramp = snd_hda_codec_read(codec, nid, 0,

• 		  AC_VERB_GET_AMP_GAIN_MUTE,
  

• 		  AC_AMP_GET_RIGHT | AC_AMP_GET_OUTPUT);
  

• if (lamp != ramp) {

• snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
  

• 		    AC_AMP_SET_RIGHT | AC_AMP_SET_OUTPUT | lamp);
  

• lamp = snd_hda_codec_read(codec, nid, 0,
  

• 		  AC_VERB_GET_AMP_GAIN_MUTE,
  

• 		  AC_AMP_GET_LEFT | AC_AMP_GET_OUTPUT);
  

• ramp = snd_hda_codec_read(codec, nid, 0,
  

• 		  AC_VERB_GET_AMP_GAIN_MUTE,
  

• 		  AC_AMP_GET_RIGHT | AC_AMP_GET_OUTPUT);
  

• snd_printd("Haswell HDMI audio: Mute after set on pin 0x%x: [0x%x 0x%x]\n", nid, lamp, ramp);
  

• }

}

/* @@ -1090,7 +1076,7 @@ static int hdmi_setup_stream(struct hda_codec *codec, hda_nid_t cvt_nid, int new_pinctl = 0;

if (is_haswell(codec))

• haswell_verify_pin_D0(codec, cvt_nid, pin_nid);
  

• haswell_verify_D0(codec, cvt_nid, pin_nid);
  
  

  if (snd_hda_query_pin_caps(codec, pin_nid) & AC_PINCAP_HBR) { pinctl = snd_hda_codec_read(codec, pin_nid, 0,

@@ -1361,13 +1347,9 @@ static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll) * changed during the stream playback */ if (is_haswell(codec) &&

•     eld->eld_valid && !old_eld_valid && per_pin->setup) {
  

• 	snd_hda_codec_write(codec, pin_nid, 0,
  

• 			    AC_VERB_SET_AMP_GAIN_MUTE,
  

• 			    AMP_OUT_UNMUTE);
  

•     eld->eld_valid && !old_eld_valid && per_pin->setup)
  hdmi_setup_audio_infoframe(codec, per_pin,
  			   per_pin->non_pcm);
  

• }
  

  } mutex_unlock(&pin_eld->lock);

-- 1.8.1.2