The patch

ASoC: wm8960: add kcontrol to select ADC data output

has been applied to the asoc tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks, Mark

From 4a5893cf67062be4f70196c3fe45cfda950ea308 Mon Sep 17 00:00:00 2001

From: Zidan Wang zidan.wang@freescale.com Date: Thu, 24 Dec 2015 14:58:03 +0800 Subject: [PATCH] ASoC: wm8960: add kcontrol to select ADC data output

add kcontrol to select ADC data output.

Signed-off-by: Zidan Wang zidan.wang@freescale.com Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/codecs/wm8960.c | 9 +++++++++ 1 file changed, 9 insertions(+)

diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c index 0563753..328bde0 100644 --- a/sound/soc/codecs/wm8960.c +++ b/sound/soc/codecs/wm8960.c @@ -147,6 +147,12 @@ static const char *wm8960_3d_upper_cutoff[] = {"High", "Low"}; static const char *wm8960_3d_lower_cutoff[] = {"Low", "High"}; static const char *wm8960_alcfunc[] = {"Off", "Right", "Left", "Stereo"}; static const char *wm8960_alcmode[] = {"ALC", "Limiter"}; +static const char *wm8960_adc_data_output_sel[] = { + "Left Data = Left ADC; Right Data = Right ADC", + "Left Data = Left ADC; Right Data = Left ADC", + "Left Data = Right ADC; Right Data = Right ADC", + "Left Data = Right ADC; Right Data = Left ADC", +};

static const struct soc_enum wm8960_enum[] = { SOC_ENUM_SINGLE(WM8960_DACCTL1, 5, 4, wm8960_polarity), @@ -155,6 +161,7 @@ static const struct soc_enum wm8960_enum[] = { SOC_ENUM_SINGLE(WM8960_3D, 5, 2, wm8960_3d_lower_cutoff), SOC_ENUM_SINGLE(WM8960_ALC1, 7, 4, wm8960_alcfunc), SOC_ENUM_SINGLE(WM8960_ALC3, 8, 2, wm8960_alcmode), + SOC_ENUM_SINGLE(WM8960_ADDCTL1, 2, 4, wm8960_adc_data_output_sel), };

static const int deemph_settings[] = { 0, 32000, 44100, 48000 }; @@ -295,6 +302,8 @@ SOC_SINGLE_TLV("Right Output Mixer Boost Bypass Volume", WM8960_BYPASS2, 4, 7, 1, bypass_tlv), SOC_SINGLE_TLV("Right Output Mixer RINPUT3 Volume", WM8960_ROUTMIX, 4, 7, 1, bypass_tlv), + +SOC_ENUM("ADC Data Output Select", wm8960_enum[6]), };

static const struct snd_kcontrol_new wm8960_lin_boost[] = {