Re: [alsa-devel] [PATCH v6] sound/soc/codecs: add LAPIS Semiconductor ML26124
On Tue, Mar 06, 2012 at 07:49:16PM +0900, Tomoya MORINAGA wrote:
On Tue, Mar 06, 2012 19:00 Mark Brown broonie@opensource.wolfsonmicro.com:
This is not what the above prototype says, the above prototype has only one register in it. You need to make this *much* clearer for the registers it's affecting.
Sorry, I couldn't understand your saying / concern. Do you mean I shouldn't use ml26124_update_bits() but snd_soc_update_bits() ?
Ideally you should be using the framework features. If there is some reason why you can't you need to make it much clearer what the reason is so people reading the code can understand.
On Tue, Mar 6, 2012 at 9:12 PM, Mark Brown broonie@opensource.wolfsonmicro.com wrote:
This is not what the above prototype says, the above prototype has only one register in it. You need to make this *much* clearer for the registers it's affecting.
Sorry, I couldn't understand your saying / concern. Do you mean I shouldn't use ml26124_update_bits() but snd_soc_update_bits() ?
Ideally you should be using the framework features. If there is some reason why you can't you need to make it much clearer what the reason is so people reading the code can understand.
If possible, I want to use framework features. However, I judged it is not possible. Let me confirm again. As I said before, all ML26124 registers need to be accessed by different address when read and write. Like below R W $00h $01h Sampling setting $02h $03h PLL setting ...
Even so, can I use framework features ?
thanks,
On Wed, Mar 07, 2012 at 11:16:50AM +0900, Tomoya MORINAGA wrote:
If possible, I want to use framework features. However, I judged it is not possible. Let me confirm again. As I said before, all ML26124 registers need to be accessed by different address when read and write. Like below R W $00h $01h Sampling setting $02h $03h PLL setting ...
Even so, can I use framework features ?
No, in which case (to repeat what I said previously) you need to make the code *much* clearer so the reader can understand what it is doing and why it's having to open code this stuff.
On Wed, Mar 7, 2012 at 8:48 PM, Mark Brown broonie@opensource.wolfsonmicro.com wrote:
If possible, I want to use framework features. However, I judged it is not possible. Let me confirm again. As I said before, all ML26124 registers need to be accessed by different address when read and write. Like below R W $00h $01h Sampling setting $02h $03h PLL setting ... Even so, can I use framework features ?
No, in which case (to repeat what I said previously) you need to make the code *much* clearer so the reader can understand what it is doing and why it's having to open code this stuff.
I understand you agree to use ml26124_update_bits(), right ? If so, do you mean that I should just add explanation (like as I explained before) why the function() is necessary to above prototype of ml26124_update_bits() ?
thanks.
On Thu, Mar 08, 2012 at 11:24:36AM +0900, Tomoya MORINAGA wrote:
If so, do you mean that I should just add explanation (like as I explained before) why the function() is necessary to above prototype of ml26124_update_bits() ?
Probably also make the interface clearer about the fact that it operates on multiple registers too.
ML26124-01HB/ML26124-02GD is 16bit monaural audio CODEC which has high resistance to voltage noise. On chip regulator realizes power supply rejection ratio be over 90dB so more than 50dB is improved than ever. ML26124-01HB/ ML26124-02GD can deliver stable audio performance without being affected by noise from the power supply circuit and peripheral components. The chip also includes a composite video signal output, which can be applied to various portable device requirements. The ML26124 is realized these functions into very small package the size is only 2.56mm x 2.46mm therefore can be construct high quality sound system easily. ML26124-01HB is 25pin WCSP package; ML26124-02GD is 32pin WQFN package.
Signed-off-by: Tomoya MORINAGA tomoya.rohm@gmail.com --- V7 - Add explanation of "ml26124_update_bits()" - Use module_i2c_driver() - ml26124_set_dai_clkdiv() moved to ml26124_set_dai_sysclk() - VMID_ON moved to SND_SOC_BIAS_STANDBY - Deleted redundant regcache_sync - Modified SND_SOC_I2C to SND_SOC_REGMAP of snd_soc_codec_set_cache_io() - Deleted "-codec" post-fix --- sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/ml26124.c | 707 ++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/ml26124.h | 132 ++++++++ 4 files changed, 845 insertions(+), 0 deletions(-) create mode 100644 sound/soc/codecs/ml26124.c create mode 100644 sound/soc/codecs/ml26124.h
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 6508e8b..e314a66 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -42,6 +42,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_MAX9850 if I2C select SND_SOC_MAX9768 if I2C select SND_SOC_MAX9877 if I2C + select SND_SOC_ML26124 if I2C select SND_SOC_PCM3008 select SND_SOC_RT5631 if I2C select SND_SOC_SGTL5000 if I2C @@ -436,5 +437,8 @@ config SND_SOC_MAX9768 config SND_SOC_MAX9877 tristate
+config SND_SOC_ML26124 + tristate + config SND_SOC_TPA6130A2 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 6662eb0..9108ee9 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -29,6 +29,7 @@ snd-soc-max9768-objs := max9768.o snd-soc-max98088-objs := max98088.o snd-soc-max98095-objs := max98095.o snd-soc-max9850-objs := max9850.o +snd-soc-ml26124-objs := ml26124.o snd-soc-pcm3008-objs := pcm3008.o snd-soc-rt5631-objs := rt5631.o snd-soc-sgtl5000-objs := sgtl5000.o @@ -135,6 +136,7 @@ obj-$(CONFIG_SND_SOC_MAX9768) += snd-soc-max9768.o obj-$(CONFIG_SND_SOC_MAX98088) += snd-soc-max98088.o obj-$(CONFIG_SND_SOC_MAX98095) += snd-soc-max98095.o obj-$(CONFIG_SND_SOC_MAX9850) += snd-soc-max9850.o +obj-$(CONFIG_SND_SOC_ML26124) += snd-soc-ml26124.o obj-$(CONFIG_SND_SOC_PCM3008) += snd-soc-pcm3008.o obj-$(CONFIG_SND_SOC_RT5631) += snd-soc-rt5631.o obj-$(CONFIG_SND_SOC_SGTL5000) += snd-soc-sgtl5000.o diff --git a/sound/soc/codecs/ml26124.c b/sound/soc/codecs/ml26124.c new file mode 100644 index 0000000..db016c1 --- /dev/null +++ b/sound/soc/codecs/ml26124.c @@ -0,0 +1,707 @@ +/* + * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/tlv.h> +#include "ml26124.h" + +#define DVOL_CTL_DVMUTE_ON BIT(4) /* Digital volume MUTE On */ +#define DVOL_CTL_DVMUTE_OFF 0 /* Digital volume MUTE Off */ +#define ML26124_SAI_NO_DELAY BIT(1) +#define ML26124_SAI_FRAME_SYNC (BIT(5) | BIT(0)) /* For mono (Telecodec) */ +#define ML26134_CACHESIZE 79 +#define ML26124_VMID BIT(0) +#define ML26124_RATES (SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_32000 |\ + SNDRV_PCM_RATE_48000) +#define ML26124_FORMATS SNDRV_PCM_FMTBIT_S16_LE +#define ML26124_NUM_REGISTER ML26134_CACHESIZE + +struct ml26124_priv { + u32 mclk; + u32 channels; + struct regmap *regmap; +}; + +struct clk_coeff { + u32 mclk; + u32 rate; + u8 pllnl; + u8 pllnh; + u8 pllml; + u8 pllmh; + u8 plldiv; +}; + +/* ML26124 configuration */ +static const DECLARE_TLV_DB_SCALE(digital_tlv, -7150, 50, 0); + +static const DECLARE_TLV_DB_SCALE(alclvl, -2250, 150, 0); +static const DECLARE_TLV_DB_SCALE(mingain, -1200, 600, 0); +static const DECLARE_TLV_DB_SCALE(maxgain, -675, 600, 0); +static const DECLARE_TLV_DB_SCALE(boost_vol, -1200, 75, 0); +static const DECLARE_TLV_DB_SCALE(ngth, -7650, 150, 0); + +static const char * const ml26124_companding[] = {"16bit PCM", "u-law", + "A-law"}; + +static const struct soc_enum ml26124_adc_companding_enum + = SOC_ENUM_SINGLE(ML26124_SAI_TRANS_CTL, 6, 3, ml26124_companding); + +static const struct soc_enum ml26124_dac_companding_enum + = SOC_ENUM_SINGLE(ML26124_SAI_RCV_CTL, 6, 3, ml26124_companding); + +static const struct snd_kcontrol_new ml26124_snd_controls[] = { + SOC_SINGLE_TLV("Capture Digital Volume", ML26124_RECORD_DIG_VOL, 0, + 0xff, 1, digital_tlv), + SOC_SINGLE_TLV("Playback Digital Volume", ML26124_PLBAK_DIG_VOL, 0, + 0xff, 1, digital_tlv), + SOC_SINGLE_TLV("Digital Boost Volume", ML26124_DIGI_BOOST_VOL, 0, + 0x3f, 0, boost_vol), + SOC_SINGLE_TLV("EQ Band0 Volume", ML26124_EQ_GAIN_BRAND0, 0, + 0xff, 1, digital_tlv), + SOC_SINGLE_TLV("EQ Band1 Volume", ML26124_EQ_GAIN_BRAND1, 0, + 0xff, 1, digital_tlv), + SOC_SINGLE_TLV("EQ Band2 Volume", ML26124_EQ_GAIN_BRAND2, 0, + 0xff, 1, digital_tlv), + SOC_SINGLE_TLV("EQ Band3 Volume", ML26124_EQ_GAIN_BRAND3, 0, + 0xff, 1, digital_tlv), + SOC_SINGLE_TLV("EQ Band4 Volume", ML26124_EQ_GAIN_BRAND4, 0, + 0xff, 1, digital_tlv), + SOC_SINGLE_TLV("ALC Target Level", ML26124_ALC_TARGET_LEV, 0, + 0xf, 1, alclvl), + SOC_SINGLE_TLV("ALC Min Input Volume", ML26124_ALC_MAXMIN_GAIN, 0, + 7, 0, mingain), + SOC_SINGLE_TLV("ALC Max Input Volume", ML26124_ALC_MAXMIN_GAIN, 4, + 7, 1, maxgain), + SOC_SINGLE_TLV("Playback Limiter Min Input Volume", + ML26124_PL_MAXMIN_GAIN, 0, 7, 0, mingain), + SOC_SINGLE_TLV("Playback Limiter Max Input Volume", + ML26124_PL_MAXMIN_GAIN, 4, 7, 1, maxgain), + SOC_SINGLE_TLV("Playback Boost Volume", ML26124_PLYBAK_BOST_VOL, 0, + 0x3f, 0, boost_vol), + SOC_SINGLE("DC High Pass Filter Switch", ML26124_FILTER_EN, 0, 1, 0), + SOC_SINGLE("Noise High Pass Filter Switch", ML26124_FILTER_EN, 1, 1, 0), + SOC_SINGLE("ZC Switch", ML26124_PW_ZCCMP_PW_MNG, 1, + 1, 0), + SOC_SINGLE("EQ Band0 Switch", ML26124_FILTER_EN, 2, 1, 0), + SOC_SINGLE("EQ Band1 Switch", ML26124_FILTER_EN, 3, 1, 0), + SOC_SINGLE("EQ Band2 Switch", ML26124_FILTER_EN, 4, 1, 0), + SOC_SINGLE("EQ Band3 Switch", ML26124_FILTER_EN, 5, 1, 0), + SOC_SINGLE("EQ Band4 Switch", ML26124_FILTER_EN, 6, 1, 0), + SOC_SINGLE("Play Limiter", ML26124_DVOL_CTL, 0, 1, 0), + SOC_SINGLE("Capture Limiter", ML26124_DVOL_CTL, 1, 1, 0), + SOC_SINGLE("Digital Volume Fade Switch", ML26124_DVOL_CTL, 3, 1, 0), + SOC_SINGLE("Digital Switch", ML26124_DVOL_CTL, 4, 1, 0), + SOC_ENUM("DAC Companding", ml26124_dac_companding_enum), + SOC_ENUM("ADC Companding", ml26124_adc_companding_enum), +}; + +static const struct snd_kcontrol_new ml26124_output_mixer_controls[] = { + SOC_DAPM_SINGLE("DAC Switch", ML26124_SPK_AMP_OUT, 1, 1, 0), + SOC_DAPM_SINGLE("Line in Switch", ML26124_SPK_AMP_OUT, 3, 1, 0), + SOC_DAPM_SINGLE("PGA Switch", ML26124_SPK_AMP_OUT, 5, 1, 0), +}; + +/* Input mux */ +static const char * const ml26124_input_select[] = {"Analog MIC SingleEnded in", + "Analog MIC Differential in", + "Digital MIC in"}; + +static const struct soc_enum ml26124_insel_enum = + SOC_ENUM_SINGLE(ML26124_MIC_IF_CTL, 0, 2, ml26124_input_select); + +static const struct snd_kcontrol_new ml26124_input_mux_controls = + SOC_DAPM_ENUM("Input Select", ml26124_insel_enum); + +static const struct snd_kcontrol_new ml26124_line_control = + SOC_DAPM_SINGLE("Switch", ML26124_PW_LOUT_PW_MNG, 1, 1, 0); + +static const struct snd_soc_dapm_widget ml26124_dapm_widgets[] = { + SND_SOC_DAPM_SUPPLY("MCLK", ML26124_CLK_EN, 0, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("PLL", ML26124_CLK_EN, 1, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("RUN-REC", ML26124_REC_PLYBAK_RUN, 0, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("RUN-PLAY", ML26124_REC_PLYBAK_RUN, 1, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("MICBIAS", ML26124_PW_REF_PW_MNG, 2, 0, NULL, 0), + SND_SOC_DAPM_MIXER("Output Mixer", ML26124_PW_SPAMP_PW_MNG, 0, 0, + &ml26124_output_mixer_controls[0], + ARRAY_SIZE(ml26124_output_mixer_controls)), + SND_SOC_DAPM_DAC("DAC", "Playback", ML26124_PW_DAC_PW_MNG, 1, 0), + SND_SOC_DAPM_ADC("ADC", "Capture", ML26124_PW_IN_PW_MNG, 1, 0), + SND_SOC_DAPM_PGA("PGA", ML26124_PW_IN_PW_MNG, 3, 0, NULL, 0), + SND_SOC_DAPM_MUX("Input Mux", SND_SOC_NOPM, 0, 0, + &ml26124_input_mux_controls), + SND_SOC_DAPM_SWITCH("Line Out Enable", SND_SOC_NOPM, 0, 0, + &ml26124_line_control), + SND_SOC_DAPM_INPUT("MDIN"), + SND_SOC_DAPM_INPUT("MIN"), + SND_SOC_DAPM_INPUT("LIN"), + SND_SOC_DAPM_OUTPUT("SPOUT"), + SND_SOC_DAPM_OUTPUT("LOUT"), +}; + +static const struct snd_soc_dapm_route ml26124_intercon[] = { + /* Supply */ + {"DAC", NULL, "MCLK"}, + {"ADC", NULL, "MCLK"}, + {"DAC", NULL, "PLL"}, + {"ADC", NULL, "PLL"}, + {"DAC", NULL, "RUN-PLAY"}, + {"ADC", NULL, "RUN-REC"}, + + /* output mixer */ + {"Output Mixer", "PGA Switch", "PGA"}, + {"Output Mixer", "DAC Switch", "DAC"}, + {"Output Mixer", "Line in Switch", "LIN"}, + + /* outputs */ + {"LOUT", NULL, "Output Mixer"}, + {"SPOUT", NULL, "Output Mixer"}, + + /* input */ + {"Input Mux", "Analog MIC SingleEnded in", "MIN"}, + {"Input Mux", "Analog MIC Differential in", "MIN"}, + {"ADC", NULL, "Input Mux"}, +}; + +/* PLLOutputFreq(Hz) = InputMclkFreq(Hz) * PLLM / (PLLN * PLLDIV) */ +static const struct clk_coeff coeff_div[] = { + {12288000, 16000, 0xc, 0x0, 0x20, 0x0, 0x4}, + {12288000, 32000, 0xc, 0x0, 0x20, 0x0, 0x4}, + {12288000, 48000, 0xc, 0x0, 0x30, 0x0, 0x4}, +}; + +static struct reg_default ml26124_reg[] = { + /* CLOCK control Register */ + {0x00, 0x00 }, /* Sampling Rate */ + {0x02, 0x00}, /* PLL NL */ + {0x04, 0x00}, /* PLLNH */ + {0x06, 0x00}, /* PLLML */ + {0x08, 0x00}, /* MLLMH */ + {0x0a, 0x00}, /* PLLDIV */ + {0x0c, 0x00}, /* Clock Enable */ + {0x0e, 0x00}, /* CLK Input/Output Control */ + + /* System Control Register */ + {0x10, 0x00}, /* Software RESET */ + {0x12, 0x00}, /* Record/Playback Run */ + {0x14, 0x00}, /* Mic Input/Output control */ + + /* Power Management Register */ + {0x20, 0x00}, /* Reference Power Management */ + {0x22, 0x00}, /* Input Power Management */ + {0x24, 0x00}, /* DAC Power Management */ + {0x26, 0x00}, /* SP-AMP Power Management */ + {0x28, 0x00}, /* LINEOUT Power Management */ + {0x2a, 0x00}, /* VIDEO Power Management */ + {0x2e, 0x00}, /* AC-CMP Power Management */ + + /* Analog reference Control Register */ + {0x30, 0x04}, /* MICBIAS Voltage Control */ + + /* Input/Output Amplifier Control Register */ + {0x32, 0x10}, /* MIC Input Volume */ + {0x38, 0x00}, /* Mic Boost Volume */ + {0x3a, 0x33}, /* Speaker AMP Volume */ + {0x48, 0x00}, /* AMP Volume Control Function Enable */ + {0x4a, 0x00}, /* Amplifier Volume Fader Control */ + + /* Analog Path Control Register */ + {0x54, 0x00}, /* Speaker AMP Output Control */ + {0x5a, 0x00}, /* Mic IF Control */ + {0xe8, 0x01}, /* Mic Select Control */ + + /* Audio Interface Control Register */ + {0x60, 0x00}, /* SAI-Trans Control */ + {0x62, 0x00}, /* SAI-Receive Control */ + {0x64, 0x00}, /* SAI Mode select */ + + /* DSP Control Register */ + {0x66, 0x01}, /* Filter Func Enable */ + {0x68, 0x00}, /* Volume Control Func Enable */ + {0x6A, 0x00}, /* Mixer & Volume Control*/ + {0x6C, 0xff}, /* Record Digital Volume */ + {0x70, 0xff}, /* Playback Digital Volume */ + {0x72, 0x10}, /* Digital Boost Volume */ + {0x74, 0xe7}, /* EQ gain Band0 */ + {0x76, 0xe7}, /* EQ gain Band1 */ + {0x78, 0xe7}, /* EQ gain Band2 */ + {0x7A, 0xe7}, /* EQ gain Band3 */ + {0x7C, 0xe7}, /* EQ gain Band4 */ + {0x7E, 0x00}, /* HPF2 CutOff*/ + {0x80, 0x00}, /* EQ Band0 Coef0L */ + {0x82, 0x00}, /* EQ Band0 Coef0H */ + {0x84, 0x00}, /* EQ Band0 Coef0L */ + {0x86, 0x00}, /* EQ Band0 Coef0H */ + {0x88, 0x00}, /* EQ Band1 Coef0L */ + {0x8A, 0x00}, /* EQ Band1 Coef0H */ + {0x8C, 0x00}, /* EQ Band1 Coef0L */ + {0x8E, 0x00}, /* EQ Band1 Coef0H */ + {0x90, 0x00}, /* EQ Band2 Coef0L */ + {0x92, 0x00}, /* EQ Band2 Coef0H */ + {0x94, 0x00}, /* EQ Band2 Coef0L */ + {0x96, 0x00}, /* EQ Band2 Coef0H */ + {0x98, 0x00}, /* EQ Band3 Coef0L */ + {0x9A, 0x00}, /* EQ Band3 Coef0H */ + {0x9C, 0x00}, /* EQ Band3 Coef0L */ + {0x9E, 0x00}, /* EQ Band3 Coef0H */ + {0xA0, 0x00}, /* EQ Band4 Coef0L */ + {0xA2, 0x00}, /* EQ Band4 Coef0H */ + {0xA4, 0x00}, /* EQ Band4 Coef0L */ + {0xA6, 0x00}, /* EQ Band4 Coef0H */ + + /* ALC Control Register */ + {0xb0, 0x00}, /* ALC Mode */ + {0xb2, 0x02}, /* ALC Attack Time */ + {0xb4, 0x03}, /* ALC Decay Time */ + {0xb6, 0x00}, /* ALC Hold Time */ + {0xb8, 0x0b}, /* ALC Target Level */ + {0xba, 0x70}, /* ALC Max/Min Gain */ + {0xbc, 0x00}, /* Noise Gate Threshold */ + {0xbe, 0x00}, /* ALC ZeroCross TimeOut */ + + /* Playback Limiter Control Register */ + {0xc0, 0x04}, /* PL Attack Time */ + {0xc2, 0x05}, /* PL Decay Time */ + {0xc4, 0x0d}, /* PL Target Level */ + {0xc6, 0x70}, /* PL Max/Min Gain */ + {0xc8, 0x10}, /* Playback Boost Volume */ + {0xca, 0x00}, /* PL ZeroCross TimeOut */ + + /* Video Amplifier Control Register */ + {0xd0, 0x01}, /* VIDEO AMP Gain Control */ + {0xd2, 0x01}, /* VIDEO AMP Setup 1 */ + {0xd4, 0x01}, /* VIDEO AMP Control2 */ +}; + +/** + * ml26124_update_bits - Update ML26124 register bit(s) + * @codec: audio codec + * @reg: codec register address (Must be specified read address, + * namely even number) + * @mask: register mask + * @value: new value + * + * Writes new register value. + * All ML26124's registers have a different address in writing and reading. + * So, standard snd_soc_update_bits() can't be used. + * + * Returns 1 for change, 0 for no change, or negative error code. + * + */ +static int ml26124_update_bits(struct snd_soc_codec *codec, unsigned short reg, + unsigned int mask, unsigned int value) +{ + int change; + unsigned int old, new; + int ret; + + ret = snd_soc_read(codec, reg); + if (ret < 0) + return ret; + + old = ret; + new = (old & ~mask) | (value & mask); + change = old != new; + if (change) { + ret = snd_soc_write(codec, reg + 1, new); + if (ret < 0) + return ret; + } + + return change; +} + +/* Get sampling rate value of sampling rate setting register (0x0) */ +static inline int get_srate(int rate) +{ + int srate; + + switch (rate) { + case 16000: + srate = 3; + break; + case 32000: + srate = 6; + break; + case 48000: + srate = 8; + break; + default: + return -EINVAL; + } + return srate; +} + +static inline int get_coeff(int mclk, int rate) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(coeff_div); i++) { + if (coeff_div[i].rate == rate && coeff_div[i].mclk == mclk) + return i; + } + return -EINVAL; +} +#define ML26124_USE_MCLK_IN BIT(2) +static int ml26124_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct ml26124_priv *priv = snd_soc_codec_get_drvdata(codec); + int i = get_coeff(priv->mclk, params_rate(hw_params)); + + priv->channels = params_channels(hw_params); + + ml26124_update_bits(codec, ML26124_CLK_CTL, + BIT(2), ML26124_USE_MCLK_IN); + + switch (params_rate(hw_params)) { + case 16000: + ml26124_update_bits(codec, ML26124_SMPLING_RATE, 0xf, + get_srate(coeff_div[i].rate)); + ml26124_update_bits(codec, ML26124_PLLNL, 0xff, + coeff_div[i].pllnl); + ml26124_update_bits(codec, ML26124_PLLNH, 0x1, + coeff_div[i].pllnh); + ml26124_update_bits(codec, ML26124_PLLML, 0xff, + coeff_div[i].pllml); + ml26124_update_bits(codec, ML26124_PLLMH, 0x3f, + coeff_div[i].pllmh); + ml26124_update_bits(codec, ML26124_PLLDIV, 0x1f, + coeff_div[i].plldiv); + break; + case 32000: + ml26124_update_bits(codec, ML26124_SMPLING_RATE, 0xf, + get_srate(coeff_div[i].rate)); + ml26124_update_bits(codec, ML26124_PLLNL, 0xff, + coeff_div[i].pllnl); + ml26124_update_bits(codec, ML26124_PLLNH, 0x1, + coeff_div[i].pllnh); + ml26124_update_bits(codec, ML26124_PLLML, 0xff, + coeff_div[i].pllml); + ml26124_update_bits(codec, ML26124_PLLMH, 0x3f, + coeff_div[i].pllmh); + ml26124_update_bits(codec, ML26124_PLLDIV, 0x1f, + coeff_div[i].plldiv); + break; + case 48000: + ml26124_update_bits(codec, ML26124_SMPLING_RATE, 0xf, + get_srate(coeff_div[i].rate)); + ml26124_update_bits(codec, ML26124_PLLNL, 0xff, + coeff_div[i].pllnl); + ml26124_update_bits(codec, ML26124_PLLNH, 0x1, + coeff_div[i].pllnh); + ml26124_update_bits(codec, ML26124_PLLML, 0xff, + coeff_div[i].pllml); + ml26124_update_bits(codec, ML26124_PLLMH, 0x3f, + coeff_div[i].pllmh); + ml26124_update_bits(codec, ML26124_PLLDIV, 0x1f, + coeff_div[i].plldiv); + break; + default: + pr_err("%s:this rate is no support for ml26124\n", __func__); + return -EINVAL; + } + + return 0; +} + +static int ml26124_mute(struct snd_soc_dai *dai, int mute) +{ + struct snd_soc_codec *codec = dai->codec; + if (mute) + ml26124_update_bits(codec, ML26124_DVOL_CTL, BIT(4), + DVOL_CTL_DVMUTE_ON); + else + ml26124_update_bits(codec, ML26124_DVOL_CTL, BIT(4), + DVOL_CTL_DVMUTE_OFF); + + return 0; +} + +static int ml26124_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + unsigned char mode; + struct snd_soc_codec *codec = codec_dai->codec; + struct ml26124_priv *priv = snd_soc_codec_get_drvdata(codec); + unsigned char mask = ML26124_SAI_NO_DELAY | ML26124_SAI_FRAME_SYNC; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + mode = 1; + break; + case SND_SOC_DAIFMT_CBS_CFS: + mode = 0; + break; + default: + return -EINVAL; + } + ml26124_update_bits(codec, ML26124_SAI_MODE_SEL, BIT(0), mode); + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + break; + default: + return -EINVAL; + } + + /* clock inversion */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + default: + return -EINVAL; + } + + /* SAI configuration */ + if (priv->channels == 1) { + ml26124_update_bits(codec, ML26124_SAI_TRANS_CTL, mask, + ML26124_SAI_NO_DELAY | ML26124_SAI_FRAME_SYNC); + ml26124_update_bits(codec, ML26124_SAI_RCV_CTL, mask, + ML26124_SAI_NO_DELAY | ML26124_SAI_FRAME_SYNC); + } else { + ml26124_update_bits(codec, ML26124_SAI_TRANS_CTL, mask, + ML26124_SAI_NO_DELAY); + ml26124_update_bits(codec, ML26124_SAI_RCV_CTL, mask, + ML26124_SAI_NO_DELAY); + } + + + return 0; +} + +static int ml26124_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct ml26124_priv *priv = snd_soc_codec_get_drvdata(codec); + + switch (clk_id) { + case ML26124_USE_PLL: + ml26124_update_bits(codec, ML26124_CLK_CTL, + BIT(0) | BIT(1), 0); + break; + case ML26124_USE_MCLKI_256FS: + ml26124_update_bits(codec, ML26124_CLK_CTL, + BIT(0) | BIT(1), 1); + break; + case ML26124_USE_MCLKI_512FS: + ml26124_update_bits(codec, ML26124_CLK_CTL, + BIT(0) | BIT(1), 2); + break; + case ML26124_USE_MCLKI_1024FS: + ml26124_update_bits(codec, ML26124_CLK_CTL, + BIT(0) | BIT(1), 3); + break; + default: + return -EINVAL; + } + + switch (freq) { + case 12288000: + priv->mclk = freq; + break; + default: + return -EINVAL; + } + return 0; +} + +static int ml26124_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + struct ml26124_priv *priv = snd_soc_codec_get_drvdata(codec); + switch (level) { + case SND_SOC_BIAS_ON: + break; + case SND_SOC_BIAS_PREPARE: + break; + case SND_SOC_BIAS_STANDBY: + /* VMID ON */ + ml26124_update_bits(codec, ML26124_PW_REF_PW_MNG, + ML26124_VMID, ML26124_VMID); + msleep(500); + if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) + regcache_sync(priv->regmap); + break; + case SND_SOC_BIAS_OFF: + /* VMID OFF */ + ml26124_update_bits(codec, ML26124_PW_REF_PW_MNG, + ML26124_VMID, 0); + break; + } + codec->dapm.bias_level = level; + return 0; +} + +static const struct snd_soc_dai_ops ml26124_dai_ops = { + .hw_params = ml26124_hw_params, + .digital_mute = ml26124_mute, + .set_fmt = ml26124_set_dai_fmt, + .set_sysclk = ml26124_set_dai_sysclk, +}; + +static struct snd_soc_dai_driver ml26124_dai = { + .name = "ml26124-hifi", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + .rates = ML26124_RATES, + .formats = ML26124_FORMATS,}, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rates = ML26124_RATES, + .formats = ML26124_FORMATS,}, + .ops = &ml26124_dai_ops, + .symmetric_rates = 1, +}; + +#ifdef CONFIG_PM +static int ml26124_suspend(struct snd_soc_codec *codec, pm_message_t state) +{ + ml26124_set_bias_level(codec, SND_SOC_BIAS_OFF); + + return 0; +} + +static int ml26124_resume(struct snd_soc_codec *codec) +{ + ml26124_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + return 0; +} +#else +#define ml26124_suspend NULL +#define ml26124_resume NULL +#endif + +static int ml26124_probe(struct snd_soc_codec *codec) +{ + int ret; + struct ml26124_priv *priv = snd_soc_codec_get_drvdata(codec); + codec->control_data = priv->regmap; + + ret = snd_soc_codec_set_cache_io(codec, 8, 8, SND_SOC_REGMAP); + if (ret < 0) { + dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); + return ret; + } + + /* Software Reset */ + ml26124_update_bits(codec, ML26124_SW_RST, 0x01, 1); + ml26124_update_bits(codec, ML26124_SW_RST, 0x01, 0); + + ml26124_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + return 0; +} + +/* power down chip */ +static struct snd_soc_codec_driver soc_codec_dev_ml26124 = { + .probe = ml26124_probe, + .suspend = ml26124_suspend, + .resume = ml26124_resume, + .set_bias_level = ml26124_set_bias_level, + .dapm_widgets = ml26124_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(ml26124_dapm_widgets), + .dapm_routes = ml26124_intercon, + .num_dapm_routes = ARRAY_SIZE(ml26124_intercon), + .controls = ml26124_snd_controls, + .num_controls = ARRAY_SIZE(ml26124_snd_controls), +}; + +static const struct regmap_config ml26124_i2c_regmap = { + .val_bits = 8, + .reg_bits = 8, + .max_register = ML26124_NUM_REGISTER, + .reg_defaults = ml26124_reg, + .num_reg_defaults = ARRAY_SIZE(ml26124_reg), + .cache_type = REGCACHE_RBTREE, +}; + +static __devinit int ml26124_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct ml26124_priv *priv; + int ret; + + priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + i2c_set_clientdata(i2c, priv); + + priv->regmap = regmap_init_i2c(i2c, &ml26124_i2c_regmap); + if (IS_ERR(priv->regmap)) { + ret = PTR_ERR(priv->regmap); + dev_err(&i2c->dev, "regmap_init_i2c() failed: %d\n", ret); + return ret; + } + + return snd_soc_register_codec(&i2c->dev, + &soc_codec_dev_ml26124, &ml26124_dai, 1); +} + +static __devexit int ml26124_i2c_remove(struct i2c_client *client) +{ + struct ml26124_priv *priv = i2c_get_clientdata(client); + + snd_soc_unregister_codec(&client->dev); + regmap_exit(priv->regmap); + return 0; +} + +static const struct i2c_device_id ml26124_i2c_id[] = { + { "ml26124", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ml26124_i2c_id); + +static struct i2c_driver ml26124_i2c_driver = { + .driver = { + .name = "ml26124", + .owner = THIS_MODULE, + }, + .probe = ml26124_i2c_probe, + .remove = __devexit_p(ml26124_i2c_remove), + .id_table = ml26124_i2c_id, +}; + +module_i2c_driver(ml26124_i2c_driver); + +MODULE_AUTHOR("Tomoya MORINAGA tomoya.rohm@gmail.com"); +MODULE_DESCRIPTION("LAPIS Semiconductor ML26124 ALSA SoC codec driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/ml26124.h b/sound/soc/codecs/ml26124.h new file mode 100644 index 0000000..d4a8df5 --- /dev/null +++ b/sound/soc/codecs/ml26124.h @@ -0,0 +1,132 @@ +/* + * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef ML26124_H +#define ML26124_H + +/* Clock Control Register */ +#define ML26124_SMPLING_RATE 0x00 +#define ML26124_PLLNL 0x02 +#define ML26124_PLLNH 0x04 +#define ML26124_PLLML 0x06 +#define ML26124_PLLMH 0x08 +#define ML26124_PLLDIV 0x0a +#define ML26124_CLK_EN 0x0c +#define ML26124_CLK_CTL 0x0e + +/* System Control Register */ +#define ML26124_SW_RST 0x10 +#define ML26124_REC_PLYBAK_RUN 0x12 +#define ML26124_MIC_TIM 0x14 + +/* Power Mnagement Register */ +#define ML26124_PW_REF_PW_MNG 0x20 +#define ML26124_PW_IN_PW_MNG 0x22 +#define ML26124_PW_DAC_PW_MNG 0x24 +#define ML26124_PW_SPAMP_PW_MNG 0x26 +#define ML26124_PW_LOUT_PW_MNG 0x28 +#define ML26124_PW_VOUT_PW_MNG 0x2a +#define ML26124_PW_ZCCMP_PW_MNG 0x2e + +/* Analog Reference Control Register */ +#define ML26124_PW_MICBIAS_VOL 0x30 + +/* Input/Output Amplifier Control Register */ +#define ML26124_PW_MIC_IN_VOL 0x32 +#define ML26124_PW_MIC_BOST_VOL 0x38 +#define ML26124_PW_SPK_AMP_VOL 0x3a +#define ML26124_PW_AMP_VOL_FUNC 0x48 +#define ML26124_PW_AMP_VOL_FADE 0x4a + +/* Analog Path Control Register */ +#define ML26124_SPK_AMP_OUT 0x54 +#define ML26124_MIC_IF_CTL 0x5a +#define ML26124_MIC_SELECT 0xe8 + +/* Audio Interface Control Register */ +#define ML26124_SAI_TRANS_CTL 0x60 +#define ML26124_SAI_RCV_CTL 0x62 +#define ML26124_SAI_MODE_SEL 0x64 + +/* DSP Control Register */ +#define ML26124_FILTER_EN 0x66 +#define ML26124_DVOL_CTL 0x68 +#define ML26124_MIXER_VOL_CTL 0x6a +#define ML26124_RECORD_DIG_VOL 0x6c +#define ML26124_PLBAK_DIG_VOL 0x70 +#define ML26124_DIGI_BOOST_VOL 0x72 +#define ML26124_EQ_GAIN_BRAND0 0x74 +#define ML26124_EQ_GAIN_BRAND1 0x76 +#define ML26124_EQ_GAIN_BRAND2 0x78 +#define ML26124_EQ_GAIN_BRAND3 0x7a +#define ML26124_EQ_GAIN_BRAND4 0x7c +#define ML26124_HPF2_CUTOFF 0x7e +#define ML26124_EQBRAND0_F0L 0x80 +#define ML26124_EQBRAND0_F0H 0x82 +#define ML26124_EQBRAND0_F1L 0x84 +#define ML26124_EQBRAND0_F1H 0x86 +#define ML26124_EQBRAND1_F0L 0x88 +#define ML26124_EQBRAND1_F0H 0x8a +#define ML26124_EQBRAND1_F1L 0x8c +#define ML26124_EQBRAND1_F1H 0x8e +#define ML26124_EQBRAND2_F0L 0x90 +#define ML26124_EQBRAND2_F0H 0x92 +#define ML26124_EQBRAND2_F1L 0x94 +#define ML26124_EQBRAND2_F1H 0x96 +#define ML26124_EQBRAND3_F0L 0x98 +#define ML26124_EQBRAND3_F0H 0x9a +#define ML26124_EQBRAND3_F1L 0x9c +#define ML26124_EQBRAND3_F1H 0x9e +#define ML26124_EQBRAND4_F0L 0xa0 +#define ML26124_EQBRAND4_F0H 0xa2 +#define ML26124_EQBRAND4_F1L 0xa4 +#define ML26124_EQBRAND4_F1H 0xa6 + +/* ALC Control Register */ +#define ML26124_ALC_MODE 0xb0 +#define ML26124_ALC_ATTACK_TIM 0xb2 +#define ML26124_ALC_DECAY_TIM 0xb4 +#define ML26124_ALC_HOLD_TIM 0xb6 +#define ML26124_ALC_TARGET_LEV 0xb8 +#define ML26124_ALC_MAXMIN_GAIN 0xba +#define ML26124_NOIS_GATE_THRSH 0xbc +#define ML26124_ALC_ZERO_TIMOUT 0xbe + +/* Playback Limiter Control Register */ +#define ML26124_PL_ATTACKTIME 0xc0 +#define ML26124_PL_DECAYTIME 0xc2 +#define ML26124_PL_TARGETTIME 0xc4 +#define ML26124_PL_MAXMIN_GAIN 0xc6 +#define ML26124_PLYBAK_BOST_VOL 0xc8 +#define ML26124_PL_0CROSS_TIMOUT 0xca + +/* Video Amplifer Control Register */ +#define ML26124_VIDEO_AMP_GAIN_CTL 0xd0 +#define ML26124_VIDEO_AMP_SETUP1 0xd2 +#define ML26124_VIDEO_AMP_CTL2 0xd4 + +/* Clock select for machine driver */ +#define ML26124_USE_PLL 0 +#define ML26124_USE_MCLKI_256FS 1 +#define ML26124_USE_MCLKI_512FS 2 +#define ML26124_USE_MCLKI_1024FS 3 + +enum ml26124_regs { + ML26124_MCLK = 0, +}; + +#endif
On Fri, Mar 09, 2012 at 03:37:06PM +0900, Tomoya MORINAGA wrote:
A substantial improvement on previous versions but there's still a few issues, though they're now fairly small.
- /* SAI configuration */
- if (priv->channels == 1) {
ml26124_update_bits(codec, ML26124_SAI_TRANS_CTL, mask,ML26124_SAI_NO_DELAY | ML26124_SAI_FRAME_SYNC);ml26124_update_bits(codec, ML26124_SAI_RCV_CTL, mask,ML26124_SAI_NO_DELAY | ML26124_SAI_FRAME_SYNC);- } else {
ml26124_update_bits(codec, ML26124_SAI_TRANS_CTL, mask,ML26124_SAI_NO_DELAY);ml26124_update_bits(codec, ML26124_SAI_RCV_CTL, mask,ML26124_SAI_NO_DELAY);- }
What happens if the system switches between 1 channel mode and multi-channel mode at runtime? It looks like _SYNC will never be cleared.
+static int ml26124_set_dai_sysclk(struct snd_soc_dai *codec_dai,
int clk_id, unsigned int freq, int dir)+{
- struct snd_soc_codec *codec = codec_dai->codec;
- struct ml26124_priv *priv = snd_soc_codec_get_drvdata(codec);
- switch (clk_id) {
- case ML26124_USE_PLL:
ml26124_update_bits(codec, ML26124_CLK_CTL,BIT(0) | BIT(1), 0);break;- case ML26124_USE_MCLKI_256FS:
ml26124_update_bits(codec, ML26124_CLK_CTL,BIT(0) | BIT(1), 1);break;- case ML26124_USE_MCLKI_512FS:
ml26124_update_bits(codec, ML26124_CLK_CTL,BIT(0) | BIT(1), 2);break;- case ML26124_USE_MCLKI_1024FS:
ml26124_update_bits(codec, ML26124_CLK_CTL,BIT(0) | BIT(1), 3);break;
Why not just specify the MCLK rate and then calculate the division based on the sample rate?
- switch (freq) {
- case 12288000:
priv->mclk = freq;break;
This is especially true given that only one MCLK rate is supported.
- case SND_SOC_BIAS_STANDBY:
/* VMID ON */ml26124_update_bits(codec, ML26124_PW_REF_PW_MNG,ML26124_VMID, ML26124_VMID);msleep(500);
This will sleep for 500ms when powering down which probably isn't what's desired...
On Wed, Mar 14, 2012 at 11:39 PM, Mark Brown broonie@opensource.wolfsonmicro.com wrote:
On Fri, Mar 09, 2012 at 03:37:06PM +0900, Tomoya MORINAGA wrote:
- /* SAI configuration */
- if (priv->channels == 1) {
- ml26124_update_bits(codec, ML26124_SAI_TRANS_CTL, mask,
- ML26124_SAI_NO_DELAY | ML26124_SAI_FRAME_SYNC);
- ml26124_update_bits(codec, ML26124_SAI_RCV_CTL, mask,
- ML26124_SAI_NO_DELAY | ML26124_SAI_FRAME_SYNC);
- } else {
- ml26124_update_bits(codec, ML26124_SAI_TRANS_CTL, mask,
- ML26124_SAI_NO_DELAY);
- ml26124_update_bits(codec, ML26124_SAI_RCV_CTL, mask,
- ML26124_SAI_NO_DELAY);
- }
What happens if the system switches between 1 channel mode and multi-channel mode at runtime? It looks like _SYNC will never be cleared.
Sorry, 'priv->channels == 1' means for telephone codec. However, we don't support this function. So, I'll delete these lines.
+static int ml26124_set_dai_sysclk(struct snd_soc_dai *codec_dai,
- int clk_id, unsigned int freq, int dir)
+{
- struct snd_soc_codec *codec = codec_dai->codec;
- struct ml26124_priv *priv = snd_soc_codec_get_drvdata(codec);
- switch (clk_id) {
- case ML26124_USE_PLL:
- ml26124_update_bits(codec, ML26124_CLK_CTL,
- BIT(0) | BIT(1), 0);
- break;
- case ML26124_USE_MCLKI_256FS:
- ml26124_update_bits(codec, ML26124_CLK_CTL,
- BIT(0) | BIT(1), 1);
- break;
- case ML26124_USE_MCLKI_512FS:
- ml26124_update_bits(codec, ML26124_CLK_CTL,
- BIT(0) | BIT(1), 2);
- break;
- case ML26124_USE_MCLKI_1024FS:
- ml26124_update_bits(codec, ML26124_CLK_CTL,
- BIT(0) | BIT(1), 3);
- break;
Why not just specify the MCLK rate and then calculate the division based on the sample rate?
OK, I'll do like your saying.
- case SND_SOC_BIAS_STANDBY:
- /* VMID ON */
- ml26124_update_bits(codec, ML26124_PW_REF_PW_MNG,
- ML26124_VMID, ML26124_VMID);
- msleep(500);
This will sleep for 500ms when powering down which probably isn't what's desired...
I'll Move into "if (codec->dapm.bias_level == SND_SOC_BIAS_OFF)" condition.
thanks.
On 03/08/2012 03:24 AM, Tomoya MORINAGA wrote:
On Wed, Mar 7, 2012 at 8:48 PM, Mark Brown broonie@opensource.wolfsonmicro.com wrote:
If possible, I want to use framework features. However, I judged it is not possible. Let me confirm again. As I said before, all ML26124 registers need to be accessed by different address when read and write. Like below R W $00h $01h Sampling setting $02h $03h PLL setting ... Even so, can I use framework features ?
No, in which case (to repeat what I said previously) you need to make the code *much* clearer so the reader can understand what it is doing and why it's having to open code this stuff.
thanks.
If this is for all registers, how does stuff like DAPM work, which uses the framework internal update_bits function?
If it's the case that the write address is always read address + 1 you can still use the framework if you set write_flag_mask to 0x01 in your regmap config. In my opinion it even makes sense to shift all the register numbers to the left by one and use a 7/9 instead of a 8/8 addr/reg layout. This will reduce the amount of memory wasted due to holes in the register cache.
On Wed, Mar 14, 2012 at 06:40:20PM +0100, Lars-Peter Clausen wrote:
If this is for all registers, how does stuff like DAPM work, which uses the framework internal update_bits function?
I was assuming that this was just for specific registers which were weird (frankly I've no idea what the chip designers were thinking if this is actually needed).
Though based on some of the issues I found on previous versions there's every chance that there's not been any testing... if that's the case it's possible this is a misunderstanding of the I2C read/write handling with the chip address?
On Thu, Mar 15, 2012 at 2:40 AM, Lars-Peter Clausen lars@metafoo.de wrote:
If this is for all registers, how does stuff like DAPM work, which uses the framework internal update_bits function?
If it's the case that the write address is always read address + 1 you can still use the framework if you set write_flag_mask to 0x01 in your regmap config. In my opinion it even makes sense to shift all the register numbers to the left by one and use a 7/9 instead of a 8/8 addr/reg layout. This will reduce the amount of memory wasted due to holes in the register cache.
Thank you for your information. I've just been investigating these. I also found ASoC core access i2c driver via snd_soc_update_bits or others. As a result, write register address is the same as read's.
I'll try to implement these.
BTW, currently, by settting ML26124 codec with fixed value, I've confirmed both playback and capture work well.
thanks
On Thu, Mar 15, 2012 at 3:29 PM, Tomoya MORINAGA tomoya.rohm@gmail.com wrote:
If this is for all registers, how does stuff like DAPM work, which uses the framework internal update_bits function?
If it's the case that the write address is always read address + 1 you can still use the framework if you set write_flag_mask to 0x01 in your regmap config. In my opinion it even makes sense to shift all the register numbers to the left by one and use a 7/9 instead of a 8/8 addr/reg layout. This will reduce the amount of memory wasted due to holes in the register cache.
Thank you for your information. I've just been investigating these. I also found ASoC core access i2c driver via snd_soc_update_bits or others. As a result, write register address is the same as read's.
I'll try to implement these.
BTW, currently, by settting ML26124 codec with fixed value, I've confirmed both playback and capture work well.
Thank you for your help, almost of ML26124 registers can be set correctly except SUPPLY. So, I have a question.
When SND_SOC_DAPM_SUPPLY is executed ? or Do I need to execute from application (like amixer) ?
thanks in advance.
On Fri, Mar 16, 2012 at 06:55:09PM +0900, Tomoya MORINAGA wrote:
When SND_SOC_DAPM_SUPPLY is executed ? or Do I need to execute from application (like amixer) ?
As with all DAPM widgets it is automatically managed by DAPM as needed.
ML26124-01HB/ML26124-02GD is 16bit monaural audio CODEC which has high resistance to voltage noise. On chip regulator realizes power supply rejection ratio be over 90dB so more than 50dB is improved than ever. ML26124-01HB/ ML26124-02GD can deliver stable audio performance without being affected by noise from the power supply circuit and peripheral components. The chip also includes a composite video signal output, which can be applied to various portable device requirements. The ML26124 is realized these functions into very small package the size is only 2.56mm x 2.46mm therefore can be construct high quality sound system easily. ML26124-01HB is 25pin WCSP package; ML26124-02GD is 32pin WQFN package.
Signed-off-by: Tomoya MORINAGA tomoya.rohm@gmail.com --- v8 - Modify codec master/slave setting - Modify interconnection/dapm setting - Use snd_soc_update_bits not ml26124_update_bits which is delted - Change Regmap setting (Add .write_flag_mask = 0x01) --- sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/ml26124.c | 681 ++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/ml26124.h | 184 ++++++++++++ 4 files changed, 871 insertions(+), 0 deletions(-) create mode 100644 sound/soc/codecs/ml26124.c create mode 100644 sound/soc/codecs/ml26124.h
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 6508e8b..e314a66 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -42,6 +42,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_MAX9850 if I2C select SND_SOC_MAX9768 if I2C select SND_SOC_MAX9877 if I2C + select SND_SOC_ML26124 if I2C select SND_SOC_PCM3008 select SND_SOC_RT5631 if I2C select SND_SOC_SGTL5000 if I2C @@ -436,5 +437,8 @@ config SND_SOC_MAX9768 config SND_SOC_MAX9877 tristate
+config SND_SOC_ML26124 + tristate + config SND_SOC_TPA6130A2 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 6662eb0..9108ee9 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -29,6 +29,7 @@ snd-soc-max9768-objs := max9768.o snd-soc-max98088-objs := max98088.o snd-soc-max98095-objs := max98095.o snd-soc-max9850-objs := max9850.o +snd-soc-ml26124-objs := ml26124.o snd-soc-pcm3008-objs := pcm3008.o snd-soc-rt5631-objs := rt5631.o snd-soc-sgtl5000-objs := sgtl5000.o @@ -135,6 +136,7 @@ obj-$(CONFIG_SND_SOC_MAX9768) += snd-soc-max9768.o obj-$(CONFIG_SND_SOC_MAX98088) += snd-soc-max98088.o obj-$(CONFIG_SND_SOC_MAX98095) += snd-soc-max98095.o obj-$(CONFIG_SND_SOC_MAX9850) += snd-soc-max9850.o +obj-$(CONFIG_SND_SOC_ML26124) += snd-soc-ml26124.o obj-$(CONFIG_SND_SOC_PCM3008) += snd-soc-pcm3008.o obj-$(CONFIG_SND_SOC_RT5631) += snd-soc-rt5631.o obj-$(CONFIG_SND_SOC_SGTL5000) += snd-soc-sgtl5000.o diff --git a/sound/soc/codecs/ml26124.c b/sound/soc/codecs/ml26124.c new file mode 100644 index 0000000..22cb5bf --- /dev/null +++ b/sound/soc/codecs/ml26124.c @@ -0,0 +1,681 @@ +/* + * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/tlv.h> +#include "ml26124.h" + +#define DVOL_CTL_DVMUTE_ON BIT(4) /* Digital volume MUTE On */ +#define DVOL_CTL_DVMUTE_OFF 0 /* Digital volume MUTE Off */ +#define ML26124_SAI_NO_DELAY BIT(1) +#define ML26124_SAI_FRAME_SYNC (BIT(5) | BIT(0)) /* For mono (Telecodec) */ +#define ML26134_CACHESIZE 212 +#define ML26124_VMID BIT(1) +#define ML26124_RATES (SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_32000 |\ + SNDRV_PCM_RATE_48000) +#define ML26124_FORMATS (SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE |\ + SNDRV_PCM_FMTBIT_S32_LE) +#define ML26124_NUM_REGISTER ML26134_CACHESIZE + +struct ml26124_priv { + u32 mclk; + u32 rate; + struct regmap *regmap; + int clk_in; + struct snd_pcm_substream *substream; +}; + +struct clk_coeff { + u32 mclk; + u32 rate; + u8 pllnl; + u8 pllnh; + u8 pllml; + u8 pllmh; + u8 plldiv; +}; + +/* ML26124 configuration */ +static const DECLARE_TLV_DB_SCALE(digital_tlv, -7150, 50, 0); + +static const DECLARE_TLV_DB_SCALE(alclvl, -2250, 150, 0); +static const DECLARE_TLV_DB_SCALE(mingain, -1200, 600, 0); +static const DECLARE_TLV_DB_SCALE(maxgain, -675, 600, 0); +static const DECLARE_TLV_DB_SCALE(boost_vol, -1200, 75, 0); +static const DECLARE_TLV_DB_SCALE(ngth, -7650, 150, 0); + +static const char * const ml26124_companding[] = {"16bit PCM", "u-law", + "A-law"}; + +static const struct soc_enum ml26124_adc_companding_enum + = SOC_ENUM_SINGLE(ML26124_SAI_TRANS_CTL, 6, 3, ml26124_companding); + +static const struct soc_enum ml26124_dac_companding_enum + = SOC_ENUM_SINGLE(ML26124_SAI_RCV_CTL, 6, 3, ml26124_companding); + +static const struct snd_kcontrol_new ml26124_snd_controls[] = { + SOC_SINGLE_TLV("Capture Digital Volume", ML26124_RECORD_DIG_VOL, 0, + 0xff, 1, digital_tlv), + SOC_SINGLE_TLV("Playback Digital Volume", ML26124_PLBAK_DIG_VOL, 0, + 0xff, 1, digital_tlv), + SOC_SINGLE_TLV("Digital Boost Volume", ML26124_DIGI_BOOST_VOL, 0, + 0x3f, 0, boost_vol), + SOC_SINGLE_TLV("EQ Band0 Volume", ML26124_EQ_GAIN_BRAND0, 0, + 0xff, 1, digital_tlv), + SOC_SINGLE_TLV("EQ Band1 Volume", ML26124_EQ_GAIN_BRAND1, 0, + 0xff, 1, digital_tlv), + SOC_SINGLE_TLV("EQ Band2 Volume", ML26124_EQ_GAIN_BRAND2, 0, + 0xff, 1, digital_tlv), + SOC_SINGLE_TLV("EQ Band3 Volume", ML26124_EQ_GAIN_BRAND3, 0, + 0xff, 1, digital_tlv), + SOC_SINGLE_TLV("EQ Band4 Volume", ML26124_EQ_GAIN_BRAND4, 0, + 0xff, 1, digital_tlv), + SOC_SINGLE_TLV("ALC Target Level", ML26124_ALC_TARGET_LEV, 0, + 0xf, 1, alclvl), + SOC_SINGLE_TLV("ALC Min Input Volume", ML26124_ALC_MAXMIN_GAIN, 0, + 7, 0, mingain), + SOC_SINGLE_TLV("ALC Max Input Volume", ML26124_ALC_MAXMIN_GAIN, 4, + 7, 1, maxgain), + SOC_SINGLE_TLV("Playback Limiter Min Input Volume", + ML26124_PL_MAXMIN_GAIN, 0, 7, 0, mingain), + SOC_SINGLE_TLV("Playback Limiter Max Input Volume", + ML26124_PL_MAXMIN_GAIN, 4, 7, 1, maxgain), + SOC_SINGLE_TLV("Playback Boost Volume", ML26124_PLYBAK_BOST_VOL, 0, + 0x3f, 0, boost_vol), + SOC_SINGLE("DC High Pass Filter Switch", ML26124_FILTER_EN, 0, 1, 0), + SOC_SINGLE("Noise High Pass Filter Switch", ML26124_FILTER_EN, 1, 1, 0), + SOC_SINGLE("ZC Switch", ML26124_PW_ZCCMP_PW_MNG, 1, + 1, 0), + SOC_SINGLE("EQ Band0 Switch", ML26124_FILTER_EN, 2, 1, 0), + SOC_SINGLE("EQ Band1 Switch", ML26124_FILTER_EN, 3, 1, 0), + SOC_SINGLE("EQ Band2 Switch", ML26124_FILTER_EN, 4, 1, 0), + SOC_SINGLE("EQ Band3 Switch", ML26124_FILTER_EN, 5, 1, 0), + SOC_SINGLE("EQ Band4 Switch", ML26124_FILTER_EN, 6, 1, 0), + SOC_SINGLE("Play Limiter", ML26124_DVOL_CTL, 0, 1, 0), + SOC_SINGLE("Capture Limiter", ML26124_DVOL_CTL, 1, 1, 0), + SOC_SINGLE("Digital Volume Fade Switch", ML26124_DVOL_CTL, 3, 1, 0), + SOC_SINGLE("Digital Switch", ML26124_DVOL_CTL, 4, 1, 0), + SOC_ENUM("DAC Companding", ml26124_dac_companding_enum), + SOC_ENUM("ADC Companding", ml26124_adc_companding_enum), +}; + +static const struct snd_kcontrol_new ml26124_output_mixer_controls[] = { + SOC_DAPM_SINGLE("DAC Switch", ML26124_SPK_AMP_OUT, 1, 1, 0), + SOC_DAPM_SINGLE("Line in loopback Switch", ML26124_SPK_AMP_OUT, 3, 1, + 0), + SOC_DAPM_SINGLE("PGA Switch", ML26124_SPK_AMP_OUT, 5, 1, 0), +}; + +/* Input mux */ +static const char * const ml26124_input_select[] = {"Analog MIC SingleEnded in", + "Digital MIC in", "Analog MIC Differential in"}; + +static const struct soc_enum ml26124_insel_enum = + SOC_ENUM_SINGLE(ML26124_MIC_IF_CTL, 0, 3, ml26124_input_select); + +static const struct snd_kcontrol_new ml26124_input_mux_controls = + SOC_DAPM_ENUM("Input Select", ml26124_insel_enum); + +static const struct snd_kcontrol_new ml26124_line_control = + SOC_DAPM_SINGLE("Switch", ML26124_PW_LOUT_PW_MNG, 1, 1, 0); + +static const struct snd_soc_dapm_widget ml26124_dapm_widgets[] = { + SND_SOC_DAPM_SUPPLY("MCLKEN", ML26124_CLK_EN, 0, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("PLLEN", ML26124_CLK_EN, 1, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("PLLOE", ML26124_CLK_EN, 2, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("MICBIAS", ML26124_PW_REF_PW_MNG, 2, 0, NULL, 0), + SND_SOC_DAPM_MIXER("Output Mixer", SND_SOC_NOPM, 0, 0, + &ml26124_output_mixer_controls[0], + ARRAY_SIZE(ml26124_output_mixer_controls)), + SND_SOC_DAPM_DAC("DAC", "Playback", ML26124_PW_DAC_PW_MNG, 1, 0), + SND_SOC_DAPM_ADC("ADC", "Capture", ML26124_PW_IN_PW_MNG, 1, 0), + SND_SOC_DAPM_PGA("PGA", ML26124_PW_IN_PW_MNG, 3, 0, NULL, 0), + SND_SOC_DAPM_MUX("Input Mux", SND_SOC_NOPM, 0, 0, + &ml26124_input_mux_controls), + SND_SOC_DAPM_SWITCH("Line Out Enable", SND_SOC_NOPM, 0, 0, + &ml26124_line_control), + SND_SOC_DAPM_INPUT("MDIN"), + SND_SOC_DAPM_INPUT("MIN"), + SND_SOC_DAPM_INPUT("LIN"), + SND_SOC_DAPM_OUTPUT("SPOUT"), + SND_SOC_DAPM_OUTPUT("LOUT"), +}; + +static const struct snd_soc_dapm_route ml26124_intercon[] = { + /* Supply */ + {"DAC", NULL, "MCLKEN"}, + {"ADC", NULL, "MCLKEN"}, + {"DAC", NULL, "PLLEN"}, + {"ADC", NULL, "PLLEN"}, + {"DAC", NULL, "PLLOE"}, + {"ADC", NULL, "PLLOE"}, + + /* output mixer */ + {"Output Mixer", "DAC Switch", "DAC"}, + {"Output Mixer", "Line in loopback Switch", "LIN"}, + + /* outputs */ + {"LOUT", NULL, "Output Mixer"}, + {"SPOUT", NULL, "Output Mixer"}, + {"Line Out Enable", NULL, "LOUT"}, + + /* input */ + {"ADC", NULL, "Input Mux"}, + {"Input Mux", "Analog MIC SingleEnded in", "PGA"}, + {"Input Mux", "Analog MIC Differential in", "PGA"}, + {"PGA", NULL, "MIN"}, +}; + +/* PLLOutputFreq(Hz) = InputMclkFreq(Hz) * PLLM / (PLLN * PLLDIV) */ +static const struct clk_coeff coeff_div[] = { + {12288000, 16000, 0xc, 0x0, 0x20, 0x0, 0x4}, + {12288000, 32000, 0xc, 0x0, 0x20, 0x0, 0x4}, + {12288000, 48000, 0xc, 0x0, 0x30, 0x0, 0x4}, +}; + +static struct reg_default ml26124_reg[] = { + /* CLOCK control Register */ + {0x00, 0x00 }, /* Sampling Rate */ + {0x02, 0x00}, /* PLL NL */ + {0x04, 0x00}, /* PLLNH */ + {0x06, 0x00}, /* PLLML */ + {0x08, 0x00}, /* MLLMH */ + {0x0a, 0x00}, /* PLLDIV */ + {0x0c, 0x00}, /* Clock Enable */ + {0x0e, 0x00}, /* CLK Input/Output Control */ + + /* System Control Register */ + {0x10, 0x00}, /* Software RESET */ + {0x12, 0x00}, /* Record/Playback Run */ + {0x14, 0x00}, /* Mic Input/Output control */ + + /* Power Management Register */ + {0x20, 0x00}, /* Reference Power Management */ + {0x22, 0x00}, /* Input Power Management */ + {0x24, 0x00}, /* DAC Power Management */ + {0x26, 0x00}, /* SP-AMP Power Management */ + {0x28, 0x00}, /* LINEOUT Power Management */ + {0x2a, 0x00}, /* VIDEO Power Management */ + {0x2e, 0x00}, /* AC-CMP Power Management */ + + /* Analog reference Control Register */ + {0x30, 0x04}, /* MICBIAS Voltage Control */ + + /* Input/Output Amplifier Control Register */ + {0x32, 0x10}, /* MIC Input Volume */ + {0x38, 0x00}, /* Mic Boost Volume */ + {0x3a, 0x33}, /* Speaker AMP Volume */ + {0x48, 0x00}, /* AMP Volume Control Function Enable */ + {0x4a, 0x00}, /* Amplifier Volume Fader Control */ + + /* Analog Path Control Register */ + {0x54, 0x00}, /* Speaker AMP Output Control */ + {0x5a, 0x00}, /* Mic IF Control */ + {0xe8, 0x01}, /* Mic Select Control */ + + /* Audio Interface Control Register */ + {0x60, 0x00}, /* SAI-Trans Control */ + {0x62, 0x00}, /* SAI-Receive Control */ + {0x64, 0x00}, /* SAI Mode select */ + + /* DSP Control Register */ + {0x66, 0x01}, /* Filter Func Enable */ + {0x68, 0x00}, /* Volume Control Func Enable */ + {0x6A, 0x00}, /* Mixer & Volume Control*/ + {0x6C, 0xff}, /* Record Digital Volume */ + {0x70, 0xff}, /* Playback Digital Volume */ + {0x72, 0x10}, /* Digital Boost Volume */ + {0x74, 0xe7}, /* EQ gain Band0 */ + {0x76, 0xe7}, /* EQ gain Band1 */ + {0x78, 0xe7}, /* EQ gain Band2 */ + {0x7A, 0xe7}, /* EQ gain Band3 */ + {0x7C, 0xe7}, /* EQ gain Band4 */ + {0x7E, 0x00}, /* HPF2 CutOff*/ + {0x80, 0x00}, /* EQ Band0 Coef0L */ + {0x82, 0x00}, /* EQ Band0 Coef0H */ + {0x84, 0x00}, /* EQ Band0 Coef0L */ + {0x86, 0x00}, /* EQ Band0 Coef0H */ + {0x88, 0x00}, /* EQ Band1 Coef0L */ + {0x8A, 0x00}, /* EQ Band1 Coef0H */ + {0x8C, 0x00}, /* EQ Band1 Coef0L */ + {0x8E, 0x00}, /* EQ Band1 Coef0H */ + {0x90, 0x00}, /* EQ Band2 Coef0L */ + {0x92, 0x00}, /* EQ Band2 Coef0H */ + {0x94, 0x00}, /* EQ Band2 Coef0L */ + {0x96, 0x00}, /* EQ Band2 Coef0H */ + {0x98, 0x00}, /* EQ Band3 Coef0L */ + {0x9A, 0x00}, /* EQ Band3 Coef0H */ + {0x9C, 0x00}, /* EQ Band3 Coef0L */ + {0x9E, 0x00}, /* EQ Band3 Coef0H */ + {0xA0, 0x00}, /* EQ Band4 Coef0L */ + {0xA2, 0x00}, /* EQ Band4 Coef0H */ + {0xA4, 0x00}, /* EQ Band4 Coef0L */ + {0xA6, 0x00}, /* EQ Band4 Coef0H */ + + /* ALC Control Register */ + {0xb0, 0x00}, /* ALC Mode */ + {0xb2, 0x02}, /* ALC Attack Time */ + {0xb4, 0x03}, /* ALC Decay Time */ + {0xb6, 0x00}, /* ALC Hold Time */ + {0xb8, 0x0b}, /* ALC Target Level */ + {0xba, 0x70}, /* ALC Max/Min Gain */ + {0xbc, 0x00}, /* Noise Gate Threshold */ + {0xbe, 0x00}, /* ALC ZeroCross TimeOut */ + + /* Playback Limiter Control Register */ + {0xc0, 0x04}, /* PL Attack Time */ + {0xc2, 0x05}, /* PL Decay Time */ + {0xc4, 0x0d}, /* PL Target Level */ + {0xc6, 0x70}, /* PL Max/Min Gain */ + {0xc8, 0x10}, /* Playback Boost Volume */ + {0xca, 0x00}, /* PL ZeroCross TimeOut */ + + /* Video Amplifier Control Register */ + {0xd0, 0x01}, /* VIDEO AMP Gain Control */ + {0xd2, 0x01}, /* VIDEO AMP Setup 1 */ + {0xd4, 0x01}, /* VIDEO AMP Control2 */ +}; + +/* Get sampling rate value of sampling rate setting register (0x0) */ +static inline int get_srate(int rate) +{ + int srate; + + switch (rate) { + case 16000: + srate = 3; + break; + case 32000: + srate = 6; + break; + case 48000: + srate = 8; + break; + default: + return -EINVAL; + } + return srate; +} + +static inline int get_coeff(int mclk, int rate) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(coeff_div); i++) { + if (coeff_div[i].rate == rate && coeff_div[i].mclk == mclk) + return i; + } + return -EINVAL; +} + +static int ml26124_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct ml26124_priv *priv = snd_soc_codec_get_drvdata(codec); + int i = get_coeff(priv->mclk, params_rate(hw_params)); + + priv->substream = substream; + priv->rate = params_rate(hw_params); + + if (priv->clk_in) { + switch (priv->mclk / params_rate(hw_params)) { + case 256: + snd_soc_update_bits(codec, ML26124_CLK_CTL, + BIT(0) | BIT(1), 1); + break; + case 512: + snd_soc_update_bits(codec, ML26124_CLK_CTL, + BIT(0) | BIT(1), 2); + break; + case 1024: + snd_soc_update_bits(codec, ML26124_CLK_CTL, + BIT(0) | BIT(1), 3); + break; + default: + dev_err(codec->dev, "Unsupported MCLKI\n"); + break; + } + } else { + snd_soc_update_bits(codec, ML26124_CLK_CTL, + BIT(0) | BIT(1), 0); + } + + switch (params_rate(hw_params)) { + case 16000: + snd_soc_update_bits(codec, ML26124_SMPLING_RATE, 0xf, + get_srate(params_rate(hw_params))); + snd_soc_update_bits(codec, ML26124_PLLNL, 0xff, + coeff_div[i].pllnl); + snd_soc_update_bits(codec, ML26124_PLLNH, 0x1, + coeff_div[i].pllnh); + snd_soc_update_bits(codec, ML26124_PLLML, 0xff, + coeff_div[i].pllml); + snd_soc_update_bits(codec, ML26124_PLLMH, 0x3f, + coeff_div[i].pllmh); + snd_soc_update_bits(codec, ML26124_PLLDIV, 0x1f, + coeff_div[i].plldiv); + break; + case 32000: + snd_soc_update_bits(codec, ML26124_SMPLING_RATE, 0xf, + get_srate(params_rate(hw_params))); + snd_soc_update_bits(codec, ML26124_PLLNL, 0xff, + coeff_div[i].pllnl); + snd_soc_update_bits(codec, ML26124_PLLNH, 0x1, + coeff_div[i].pllnh); + snd_soc_update_bits(codec, ML26124_PLLML, 0xff, + coeff_div[i].pllml); + snd_soc_update_bits(codec, ML26124_PLLMH, 0x3f, + coeff_div[i].pllmh); + snd_soc_update_bits(codec, ML26124_PLLDIV, 0x1f, + coeff_div[i].plldiv); + break; + case 48000: + snd_soc_update_bits(codec, ML26124_SMPLING_RATE, 0xf, + get_srate(params_rate(hw_params))); + snd_soc_update_bits(codec, ML26124_PLLNL, 0xff, + coeff_div[i].pllnl); + snd_soc_update_bits(codec, ML26124_PLLNH, 0x1, + coeff_div[i].pllnh); + snd_soc_update_bits(codec, ML26124_PLLML, 0xff, + coeff_div[i].pllml); + snd_soc_update_bits(codec, ML26124_PLLMH, 0x3f, + coeff_div[i].pllmh); + snd_soc_update_bits(codec, ML26124_PLLDIV, 0x1f, + coeff_div[i].plldiv); + break; + default: + pr_err("%s:this rate is no support for ml26124\n", __func__); + return -EINVAL; + } + + return 0; +} + +static int ml26124_mute(struct snd_soc_dai *dai, int mute) +{ + struct snd_soc_codec *codec = dai->codec; + struct ml26124_priv *priv = snd_soc_codec_get_drvdata(codec); + + switch (priv->substream->stream) { + case SNDRV_PCM_STREAM_CAPTURE: + snd_soc_update_bits(codec, ML26124_REC_PLYBAK_RUN, BIT(0), 1); + break; + case SNDRV_PCM_STREAM_PLAYBACK: + snd_soc_update_bits(codec, ML26124_REC_PLYBAK_RUN, BIT(1), 2); + break; + } + + if (mute) + snd_soc_update_bits(codec, ML26124_DVOL_CTL, BIT(4), + DVOL_CTL_DVMUTE_ON); + else + snd_soc_update_bits(codec, ML26124_DVOL_CTL, BIT(4), + DVOL_CTL_DVMUTE_OFF); + + return 0; +} + +static int ml26124_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + unsigned char mode; + struct snd_soc_codec *codec = codec_dai->codec; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + mode = 1; + break; + case SND_SOC_DAIFMT_CBS_CFS: + mode = 0; + break; + default: + return -EINVAL; + } + snd_soc_update_bits(codec, ML26124_SAI_MODE_SEL, BIT(0), mode); + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + break; + default: + return -EINVAL; + } + + /* clock inversion */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + default: + return -EINVAL; + } + + return 0; +} + +static int ml26124_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct ml26124_priv *priv = snd_soc_codec_get_drvdata(codec); + + switch (clk_id) { + case ML26124_USE_PLLOUT: + priv->clk_in = ML26124_USE_PLLOUT; + break; + case ML26124_USE_MCLKI: + priv->clk_in = ML26124_USE_MCLKI; + break; + default: + return -EINVAL; + } + + priv->mclk = freq; + + return 0; +} + +static int ml26124_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + struct ml26124_priv *priv = snd_soc_codec_get_drvdata(codec); + + switch (level) { + case SND_SOC_BIAS_ON: + snd_soc_update_bits(codec, ML26124_PW_SPAMP_PW_MNG, + ML26124_R26_MASK, ML26124_BLT_PREAMP_ON); + msleep(100); + snd_soc_update_bits(codec, ML26124_PW_SPAMP_PW_MNG, + ML26124_R26_MASK, + ML26124_MICBEN_ON | ML26124_BLT_ALL_ON); + break; + case SND_SOC_BIAS_PREPARE: + break; + case SND_SOC_BIAS_STANDBY: + /* VMID ON */ + if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) { + snd_soc_update_bits(codec, ML26124_PW_REF_PW_MNG, + ML26124_VMID, ML26124_VMID); + msleep(500); + regcache_sync(priv->regmap); + } + break; + case SND_SOC_BIAS_OFF: + /* VMID OFF */ + snd_soc_update_bits(codec, ML26124_PW_REF_PW_MNG, + ML26124_VMID, 0); + break; + } + codec->dapm.bias_level = level; + return 0; +} + +static const struct snd_soc_dai_ops ml26124_dai_ops = { + .hw_params = ml26124_hw_params, + .digital_mute = ml26124_mute, + .set_fmt = ml26124_set_dai_fmt, + .set_sysclk = ml26124_set_dai_sysclk, +}; + +static struct snd_soc_dai_driver ml26124_dai = { + .name = "ml26124-hifi", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + .rates = ML26124_RATES, + .formats = ML26124_FORMATS,}, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rates = ML26124_RATES, + .formats = ML26124_FORMATS,}, + .ops = &ml26124_dai_ops, + .symmetric_rates = 1, +}; + +#ifdef CONFIG_PM +static int ml26124_suspend(struct snd_soc_codec *codec) +{ + ml26124_set_bias_level(codec, SND_SOC_BIAS_OFF); + + return 0; +} + +static int ml26124_resume(struct snd_soc_codec *codec) +{ + ml26124_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + return 0; +} +#else +#define ml26124_suspend NULL +#define ml26124_resume NULL +#endif + +static int ml26124_probe(struct snd_soc_codec *codec) +{ + int ret; + struct ml26124_priv *priv = snd_soc_codec_get_drvdata(codec); + codec->control_data = priv->regmap; + + ret = snd_soc_codec_set_cache_io(codec, 7, 9, SND_SOC_REGMAP); + if (ret < 0) { + dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); + return ret; + } + + /* Software Reset */ + snd_soc_update_bits(codec, ML26124_SW_RST, 0x01, 1); + snd_soc_update_bits(codec, ML26124_SW_RST, 0x01, 0); + + ml26124_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + return 0; +} + +static struct snd_soc_codec_driver soc_codec_dev_ml26124 = { + .probe = ml26124_probe, + .suspend = ml26124_suspend, + .resume = ml26124_resume, + .set_bias_level = ml26124_set_bias_level, + .dapm_widgets = ml26124_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(ml26124_dapm_widgets), + .dapm_routes = ml26124_intercon, + .num_dapm_routes = ARRAY_SIZE(ml26124_intercon), + .controls = ml26124_snd_controls, + .num_controls = ARRAY_SIZE(ml26124_snd_controls), +}; + +static const struct regmap_config ml26124_i2c_regmap = { + .val_bits = 8, + .reg_bits = 8, + .max_register = ML26124_NUM_REGISTER, + .reg_defaults = ml26124_reg, + .num_reg_defaults = ARRAY_SIZE(ml26124_reg), + .cache_type = REGCACHE_RBTREE, + .write_flag_mask = 0x01, +}; + +static __devinit int ml26124_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct ml26124_priv *priv; + int ret; + + priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + i2c_set_clientdata(i2c, priv); + + priv->regmap = regmap_init_i2c(i2c, &ml26124_i2c_regmap); + if (IS_ERR(priv->regmap)) { + ret = PTR_ERR(priv->regmap); + dev_err(&i2c->dev, "regmap_init_i2c() failed: %d\n", ret); + return ret; + } + + return snd_soc_register_codec(&i2c->dev, + &soc_codec_dev_ml26124, &ml26124_dai, 1); +} + +static __devexit int ml26124_i2c_remove(struct i2c_client *client) +{ + struct ml26124_priv *priv = i2c_get_clientdata(client); + + snd_soc_unregister_codec(&client->dev); + regmap_exit(priv->regmap); + return 0; +} + +static const struct i2c_device_id ml26124_i2c_id[] = { + { "ml26124", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ml26124_i2c_id); + +static struct i2c_driver ml26124_i2c_driver = { + .driver = { + .name = "ml26124", + .owner = THIS_MODULE, + }, + .probe = ml26124_i2c_probe, + .remove = __devexit_p(ml26124_i2c_remove), + .id_table = ml26124_i2c_id, +}; + +module_i2c_driver(ml26124_i2c_driver); + +MODULE_AUTHOR("Tomoya MORINAGA tomoya.rohm@gmail.com"); +MODULE_DESCRIPTION("LAPIS Semiconductor ML26124 ALSA SoC codec driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/ml26124.h b/sound/soc/codecs/ml26124.h new file mode 100644 index 0000000..5ea0cbb --- /dev/null +++ b/sound/soc/codecs/ml26124.h @@ -0,0 +1,184 @@ +/* + * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef ML26124_H +#define ML26124_H + +/* Clock Control Register */ +#define ML26124_SMPLING_RATE 0x00 +#define ML26124_PLLNL 0x02 +#define ML26124_PLLNH 0x04 +#define ML26124_PLLML 0x06 +#define ML26124_PLLMH 0x08 +#define ML26124_PLLDIV 0x0a +#define ML26124_CLK_EN 0x0c +#define ML26124_CLK_CTL 0x0e + +/* System Control Register */ +#define ML26124_SW_RST 0x10 +#define ML26124_REC_PLYBAK_RUN 0x12 +#define ML26124_MIC_TIM 0x14 + +/* Power Mnagement Register */ +#define ML26124_PW_REF_PW_MNG 0x20 +#define ML26124_PW_IN_PW_MNG 0x22 +#define ML26124_PW_DAC_PW_MNG 0x24 +#define ML26124_PW_SPAMP_PW_MNG 0x26 +#define ML26124_PW_LOUT_PW_MNG 0x28 +#define ML26124_PW_VOUT_PW_MNG 0x2a +#define ML26124_PW_ZCCMP_PW_MNG 0x2e + +/* Analog Reference Control Register */ +#define ML26124_PW_MICBIAS_VOL 0x30 + +/* Input/Output Amplifier Control Register */ +#define ML26124_PW_MIC_IN_VOL 0x32 +#define ML26124_PW_MIC_BOST_VOL 0x38 +#define ML26124_PW_SPK_AMP_VOL 0x3a +#define ML26124_PW_AMP_VOL_FUNC 0x48 +#define ML26124_PW_AMP_VOL_FADE 0x4a + +/* Analog Path Control Register */ +#define ML26124_SPK_AMP_OUT 0x54 +#define ML26124_MIC_IF_CTL 0x5a +#define ML26124_MIC_SELECT 0xe8 + +/* Audio Interface Control Register */ +#define ML26124_SAI_TRANS_CTL 0x60 +#define ML26124_SAI_RCV_CTL 0x62 +#define ML26124_SAI_MODE_SEL 0x64 + +/* DSP Control Register */ +#define ML26124_FILTER_EN 0x66 +#define ML26124_DVOL_CTL 0x68 +#define ML26124_MIXER_VOL_CTL 0x6a +#define ML26124_RECORD_DIG_VOL 0x6c +#define ML26124_PLBAK_DIG_VOL 0x70 +#define ML26124_DIGI_BOOST_VOL 0x72 +#define ML26124_EQ_GAIN_BRAND0 0x74 +#define ML26124_EQ_GAIN_BRAND1 0x76 +#define ML26124_EQ_GAIN_BRAND2 0x78 +#define ML26124_EQ_GAIN_BRAND3 0x7a +#define ML26124_EQ_GAIN_BRAND4 0x7c +#define ML26124_HPF2_CUTOFF 0x7e +#define ML26124_EQBRAND0_F0L 0x80 +#define ML26124_EQBRAND0_F0H 0x82 +#define ML26124_EQBRAND0_F1L 0x84 +#define ML26124_EQBRAND0_F1H 0x86 +#define ML26124_EQBRAND1_F0L 0x88 +#define ML26124_EQBRAND1_F0H 0x8a +#define ML26124_EQBRAND1_F1L 0x8c +#define ML26124_EQBRAND1_F1H 0x8e +#define ML26124_EQBRAND2_F0L 0x90 +#define ML26124_EQBRAND2_F0H 0x92 +#define ML26124_EQBRAND2_F1L 0x94 +#define ML26124_EQBRAND2_F1H 0x96 +#define ML26124_EQBRAND3_F0L 0x98 +#define ML26124_EQBRAND3_F0H 0x9a +#define ML26124_EQBRAND3_F1L 0x9c +#define ML26124_EQBRAND3_F1H 0x9e +#define ML26124_EQBRAND4_F0L 0xa0 +#define ML26124_EQBRAND4_F0H 0xa2 +#define ML26124_EQBRAND4_F1L 0xa4 +#define ML26124_EQBRAND4_F1H 0xa6 + +/* ALC Control Register */ +#define ML26124_ALC_MODE 0xb0 +#define ML26124_ALC_ATTACK_TIM 0xb2 +#define ML26124_ALC_DECAY_TIM 0xb4 +#define ML26124_ALC_HOLD_TIM 0xb6 +#define ML26124_ALC_TARGET_LEV 0xb8 +#define ML26124_ALC_MAXMIN_GAIN 0xba +#define ML26124_NOIS_GATE_THRSH 0xbc +#define ML26124_ALC_ZERO_TIMOUT 0xbe + +/* Playback Limiter Control Register */ +#define ML26124_PL_ATTACKTIME 0xc0 +#define ML26124_PL_DECAYTIME 0xc2 +#define ML26124_PL_TARGETTIME 0xc4 +#define ML26124_PL_MAXMIN_GAIN 0xc6 +#define ML26124_PLYBAK_BOST_VOL 0xc8 +#define ML26124_PL_0CROSS_TIMOUT 0xca + +/* Video Amplifer Control Register */ +#define ML26124_VIDEO_AMP_GAIN_CTL 0xd0 +#define ML26124_VIDEO_AMP_SETUP1 0xd2 +#define ML26124_VIDEO_AMP_CTL2 0xd4 + +/* Clock select for machine driver */ +#define ML26124_USE_PLL 0 +#define ML26124_USE_MCLKI_256FS 1 +#define ML26124_USE_MCLKI_512FS 2 +#define ML26124_USE_MCLKI_1024FS 3 + +/* Register Mask */ +#define ML26124_R0_MASK 0xf +#define ML26124_R2_MASK 0xff +#define ML26124_R4_MASK 0x1 +#define ML26124_R6_MASK 0xf +#define ML26124_R8_MASK 0x3f +#define ML26124_Ra_MASK 0x1f +#define ML26124_Rc_MASK 0x1f +#define ML26124_Re_MASK 0x7 +#define ML26124_R10_MASK 0x1 +#define ML26124_R12_MASK 0x17 +#define ML26124_R14_MASK 0x3f +#define ML26124_R20_MASK 0x47 +#define ML26124_R22_MASK 0xa +#define ML26124_R24_MASK 0x2 +#define ML26124_R26_MASK 0x1f +#define ML26124_R28_MASK 0x2 +#define ML26124_R2a_MASK 0x2 +#define ML26124_R2e_MASK 0x2 +#define ML26124_R30_MASK 0x7 +#define ML26124_R32_MASK 0x3f +#define ML26124_R38_MASK 0x38 +#define ML26124_R3a_MASK 0x3f +#define ML26124_R48_MASK 0x3 +#define ML26124_R4a_MASK 0x7 +#define ML26124_R54_MASK 0x2a +#define ML26124_R5a_MASK 0x3 +#define ML26124_Re8_MASK 0x3 +#define ML26124_R60_MASK 0xff +#define ML26124_R62_MASK 0xff +#define ML26124_R64_MASK 0x1 +#define ML26124_R66_MASK 0xff +#define ML26124_R68_MASK 0x3b +#define ML26124_R6a_MASK 0xf3 +#define ML26124_R6c_MASK 0xff +#define ML26124_R70_MASK 0xff + +#define ML26124_MCLKEN BIT(0) +#define ML26124_PLLEN BIT(1) +#define ML26124_PLLOE BIT(2) +#define ML26124_MCLKOE BIT(3) + +#define ML26124_BLT_ALL_ON 0x1f +#define ML26124_BLT_PREAMP_ON 0x13 + +#define ML26124_MICBEN_ON BIT(2) + +enum ml26124_regs { + ML26124_MCLK = 0, +}; + +enum ml26124_clk_in { + ML26124_USE_PLLOUT = 0, + ML26124_USE_MCLKI, +}; + +#endif
On Mon, Mar 19, 2012 at 08:59:28PM +0900, Tomoya MORINAGA wrote:
ML26124-01HB/ML26124-02GD is 16bit monaural audio CODEC which has high resistance to voltage noise. On chip regulator realizes power supply rejection
Applied, thanks, but:
- Stop sending patches as followups to old patches, this really doesn't - Do try to use subject lines for your patches which are consistent with the subsystem.
On Tue, Mar 20, 2012 at 4:07 AM, Mark Brown broonie@opensource.wolfsonmicro.com wrote:
ML26124-01HB/ML26124-02GD is 16bit monaural audio CODEC which has high resistance to voltage noise. On chip regulator realizes power supply rejection
Applied, thanks, but:
- Stop sending patches as followups to old patches, this really doesn't - Do try to use subject lines for your patches which are consistent with the subsystem.
OK. I'll do the above.
thanks
participants (3)
-
Lars-Peter Clausen -
Mark Brown -
Tomoya MORINAGA