[alsa-devel] [PATCH] ASoC: nau8825: disable sinc filter for high THD of ADC
This bit will enable 4th order SINC filter. =1, filter will enable; but it consumes higher power. =0, the sinc filter is disable, and it should always keep 0 value to get high THD.
Therefor, disable the filter when codec initiation for better performance when recording.
Signed-off-by: John Hsu KCHSU0@nuvoton.com --- sound/soc/codecs/nau8825.c | 3 ++- sound/soc/codecs/nau8825.h | 2 ++ 2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 2b89569..efe3a44 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -1846,7 +1846,8 @@ static void nau8825_init_regs(struct nau8825 *nau8825) * (audible hiss). Set it to something better. */ regmap_update_bits(regmap, NAU8825_REG_ADC_RATE, - NAU8825_ADC_SYNC_DOWN_MASK, NAU8825_ADC_SYNC_DOWN_64); + NAU8825_ADC_SYNC_DOWN_MASK | NAU8825_ADC_SINC4_EN, + NAU8825_ADC_SYNC_DOWN_64); regmap_update_bits(regmap, NAU8825_REG_DAC_CTRL1, NAU8825_DAC_OVERSAMPLE_MASK, NAU8825_DAC_OVERSAMPLE_64); /* Disable DACR/L power */ diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h index 0672a25..5d1704e 100644 --- a/sound/soc/codecs/nau8825.h +++ b/sound/soc/codecs/nau8825.h @@ -269,6 +269,8 @@ #define NAU8825_BIQ_PATH_DAC (1 << NAU8825_BIQ_PATH_SFT)
/* ADC_RATE (0x2b) */ +#define NAU8825_ADC_SINC4_SFT 4 +#define NAU8825_ADC_SINC4_EN (1 << NAU8825_ADC_SINC4_SFT) #define NAU8825_ADC_SYNC_DOWN_SFT 0 #define NAU8825_ADC_SYNC_DOWN_MASK 0x3 #define NAU8825_ADC_SYNC_DOWN_32 0
On Fri, Dec 02, 2016 at 09:48:58AM +0800, John Hsu wrote:
This bit will enable 4th order SINC filter. =1, filter will enable; but it consumes higher power. =0, the sinc filter is disable, and it should always keep 0 value to get high THD.
Therefor, disable the filter when codec initiation for better performance when recording.
This looks like something that users should be able to control at runtime - while some users are going to prefer lower power there will most likely also be some users who prefer the better performance (or perhaps even users who switch depending on if they're running on battery or something).
Hi, On 12/5/2016 7:50 PM, Mark Brown wrote:
On Fri, Dec 02, 2016 at 09:48:58AM +0800, John Hsu wrote:
This bit will enable 4th order SINC filter. =1, filter will enable; but it consumes higher power. =0, the sinc filter is disable, and it should always keep 0 value to get high THD.
Therefor, disable the filter when codec initiation for better performance when recording.
This looks like something that users should be able to control at runtime - while some users are going to prefer lower power there will most likely also be some users who prefer the better performance (or perhaps even users who switch depending on if they're running on battery or something).
The function is not suitable for the voice application and easy to make distortion. Therefore, we want to disalbe it as default to get a high signal to distortion ratio. Yes, I agree it that users maybe want to eanble it sometimes. I can add a kcontrol for the function as well.
The patch
ASoC: nau8825: disable sinc filter for high THD of ADC
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 5f1516d52f9287a94dc3b9d57c370ed01802a911 Mon Sep 17 00:00:00 2001
From: John Hsu KCHSU0@nuvoton.com Date: Fri, 2 Dec 2016 09:48:58 +0800 Subject: [PATCH] ASoC: nau8825: disable sinc filter for high THD of ADC
This bit will enable 4th order SINC filter. =1, filter will enable; but it consumes higher power. =0, the sinc filter is disable, and it should always keep 0 value to get high THD.
Therefor, disable the filter when codec initiation for better performance when recording.
Signed-off-by: John Hsu KCHSU0@nuvoton.com Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/codecs/nau8825.c | 3 ++- sound/soc/codecs/nau8825.h | 2 ++ 2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 2b89569333a1..efe3a44658d5 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -1846,7 +1846,8 @@ static void nau8825_init_regs(struct nau8825 *nau8825) * (audible hiss). Set it to something better. */ regmap_update_bits(regmap, NAU8825_REG_ADC_RATE, - NAU8825_ADC_SYNC_DOWN_MASK, NAU8825_ADC_SYNC_DOWN_64); + NAU8825_ADC_SYNC_DOWN_MASK | NAU8825_ADC_SINC4_EN, + NAU8825_ADC_SYNC_DOWN_64); regmap_update_bits(regmap, NAU8825_REG_DAC_CTRL1, NAU8825_DAC_OVERSAMPLE_MASK, NAU8825_DAC_OVERSAMPLE_64); /* Disable DACR/L power */ diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h index 0672a25617b9..5d1704e73241 100644 --- a/sound/soc/codecs/nau8825.h +++ b/sound/soc/codecs/nau8825.h @@ -269,6 +269,8 @@ #define NAU8825_BIQ_PATH_DAC (1 << NAU8825_BIQ_PATH_SFT)
/* ADC_RATE (0x2b) */ +#define NAU8825_ADC_SINC4_SFT 4 +#define NAU8825_ADC_SINC4_EN (1 << NAU8825_ADC_SINC4_SFT) #define NAU8825_ADC_SYNC_DOWN_SFT 0 #define NAU8825_ADC_SYNC_DOWN_MASK 0x3 #define NAU8825_ADC_SYNC_DOWN_32 0
participants (2)
-
John Hsu -
Mark Brown