[alsa-devel] [PATCH] ASoC: codecs: Add support for AK5558 ADC driver
AK5558 is a 32-bit, 768 kHZ sampling, differential input ADC for digital audio systems. Datasheet is available at: https://www.akm.com/akm/en/file/datasheet/AK5558VN.pdf Initial patch includes support for normal and TDM modes. Signed-off-by: Junichi Wakasugi <wakasugi.jb@om.asahi-kasei.co.jp> Signed-off-by: Mihai Serban <mihai.serban@nxp.com> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> --- Documentation/devicetree/bindings/sound/ak5558.txt | 20 + sound/soc/codecs/Kconfig | 6 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/ak5558.c | 754 +++++++++++++++++++++ sound/soc/codecs/ak5558.h | 60 ++ 5 files changed, 842 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ak5558.txt create mode 100644 sound/soc/codecs/ak5558.c create mode 100644 sound/soc/codecs/ak5558.h diff --git a/Documentation/devicetree/bindings/sound/ak5558.txt b/Documentation/devicetree/bindings/sound/ak5558.txt new file mode 100644 index 0000000..c6c71af --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ak5558.txt @@ -0,0 +1,20 @@ +AK5558 8 channel differential 32-bit delta-sigma ADC + +This device supports I2C mode only. + +Required properties: + +- compatible : "asahi-kasei,ak5558" +- reg : The I2C address of the device for I2C. +- asahi-kasei,pdn-gpios: A GPIO specifier for the GPIO controlling + the power down & reset pin. + +Example: + +&i2c { + ak5558: ak5558@10 { + compatible = "asahi-kasei,ak5558"; + reg = <0x10>; + asahi-kasei,pdn-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index c367d11..84a15d4 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -42,6 +42,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_AK4642 if I2C select SND_SOC_AK4671 if I2C select SND_SOC_AK5386 + select SND_SOC_AK5558 if I2C select SND_SOC_ALC5623 if I2C select SND_SOC_ALC5632 if I2C select SND_SOC_BT_SCO @@ -394,6 +395,11 @@ config SND_SOC_AK4671 config SND_SOC_AK5386 tristate "AKM AK5638 CODEC" +config SND_SOC_AK5558 + tristate "AKM AK5558 CODEC" + depends on I2C + select REGMAP_I2C + config SND_SOC_ALC5623 tristate "Realtek ALC5623 CODEC" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 77c1818..3a3d8b1 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -33,6 +33,7 @@ snd-soc-ak4641-objs := ak4641.o snd-soc-ak4642-objs := ak4642.o snd-soc-ak4671-objs := ak4671.o snd-soc-ak5386-objs := ak5386.o +snd-soc-ak5558-objs := ak5558.o snd-soc-arizona-objs := arizona.o snd-soc-bt-sco-objs := bt-sco.o snd-soc-cq93vc-objs := cq93vc.o @@ -271,6 +272,7 @@ obj-$(CONFIG_SND_SOC_AK4641) += snd-soc-ak4641.o obj-$(CONFIG_SND_SOC_AK4642) += snd-soc-ak4642.o obj-$(CONFIG_SND_SOC_AK4671) += snd-soc-ak4671.o obj-$(CONFIG_SND_SOC_AK5386) += snd-soc-ak5386.o +obj-$(CONFIG_SND_SOC_AK5558) += snd-soc-ak5558.o obj-$(CONFIG_SND_SOC_ALC5623) += snd-soc-alc5623.o obj-$(CONFIG_SND_SOC_ALC5632) += snd-soc-alc5632.o obj-$(CONFIG_SND_SOC_ARIZONA) += snd-soc-arizona.o diff --git a/sound/soc/codecs/ak5558.c b/sound/soc/codecs/ak5558.c new file mode 100644 index 0000000..eeaeea9 --- /dev/null +++ b/sound/soc/codecs/ak5558.c @@ -0,0 +1,754 @@ +/* + * ak5558.c -- audio driver for AK5558 ADC + * + * Copyright (C) 2015 Asahi Kasei Microdevices Corporation + * Copyright 2018 NXP + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/gpio/consumer.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/tlv.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/pm_runtime.h> + +#include "ak5558.h" + +#define AK5558_SLAVE_CKS_AUTO + +/* AK5558 Codec Private Data */ +struct ak5558_priv { + struct snd_soc_codec codec; + struct regmap *regmap; + struct i2c_client *i2c; + int fs; /* Sampling Frequency */ + int rclk; /* Master Clock */ + int pdn_gpio; /* Power on / Reset GPIO */ + int slots; + int slot_width; +}; + +/* ak5558 register cache & default register settings */ +static const struct reg_default ak5558_reg[] = { + { 0x0, 0xFF }, /* 0x00 AK5558_00_POWER_MANAGEMENT1 */ + { 0x1, 0x01 }, /* 0x01 AK5558_01_POWER_MANAGEMENT2 */ + { 0x2, 0x01 }, /* 0x02 AK5558_02_CONTROL1 */ + { 0x3, 0x00 }, /* 0x03 AK5558_03_CONTROL2 */ + { 0x4, 0x00 }, /* 0x04 AK5558_04_CONTROL3 */ + { 0x5, 0x00 } /* 0x05 AK5558_05_DSD */ +}; + +static const char * const mono_texts[] = { + "8 Slot", "2 Slot", "4 Slot", "1 Slot", +}; + +static const struct soc_enum ak5558_mono_enum[] = { + SOC_ENUM_SINGLE(AK5558_01_POWER_MANAGEMENT2, 1, + ARRAY_SIZE(mono_texts), mono_texts) +}; + +static const char * const tdm_texts[] = { + "Off", "TDM128", "TDM256", "TDM512", +}; + +static const char * const digfil_texts[] = { + "Sharp Roll-Off", "Show Roll-Off", + "Short Delay Sharp Roll-Off", "Short Delay Show Roll-Off", +}; + +static const struct soc_enum ak5558_adcset_enum[] = { + SOC_ENUM_SINGLE(AK5558_03_CONTROL2, 5, + ARRAY_SIZE(tdm_texts), tdm_texts), + SOC_ENUM_SINGLE(AK5558_04_CONTROL3, 0, + ARRAY_SIZE(digfil_texts), digfil_texts), +}; + +static const char * const dsdon_texts[] = { + "PCM", "DSD", +}; + +static const char * const dsdsel_texts[] = { + "64fs", "128fs", "256fs" +}; + +static const char * const dckb_texts[] = { + "Falling", "Rising", +}; + +static const char * const dcks_texts[] = { + "512fs", "768fs", +}; + +static const struct soc_enum ak5558_dsdset_enum[] = { + SOC_ENUM_SINGLE(AK5558_04_CONTROL3, 7, + ARRAY_SIZE(dsdon_texts), dsdon_texts), + SOC_ENUM_SINGLE(AK5558_05_DSD, 0, + ARRAY_SIZE(dsdsel_texts), dsdsel_texts), + SOC_ENUM_SINGLE(AK5558_05_DSD, 2, ARRAY_SIZE(dckb_texts), dckb_texts), + SOC_ENUM_SINGLE(AK5558_05_DSD, 5, ARRAY_SIZE(dcks_texts), dcks_texts), +}; + +static const struct snd_kcontrol_new ak5558_snd_controls[] = { + SOC_ENUM("AK5558 Monaural Mode", ak5558_mono_enum[0]), + SOC_ENUM("AK5558 TDM mode", ak5558_adcset_enum[0]), + SOC_ENUM("AK5558 Digital Filter", ak5558_adcset_enum[1]), + + SOC_ENUM("AK5558 DSD Mode", ak5558_dsdset_enum[0]), + SOC_ENUM("AK5558 Frequency of DCLK", ak5558_dsdset_enum[1]), + SOC_ENUM("AK5558 Polarity of DCLK", ak5558_dsdset_enum[2]), + SOC_ENUM("AK5558 Master Clock Frequency at DSD Mode", + ak5558_dsdset_enum[3]), + + SOC_SINGLE("AK5558 DSD Phase Modulation", AK5558_05_DSD, 3, 1, 0), +}; + +static const char * const ak5558_channel_select_texts[] = {"Off", "On"}; + +static SOC_ENUM_SINGLE_VIRT_DECL(ak5558_channel1_mux_enum, + ak5558_channel_select_texts); + +static const struct snd_kcontrol_new ak5558_channel1_mux_control = + SOC_DAPM_ENUM("Ch1 Switch", ak5558_channel1_mux_enum); + +static SOC_ENUM_SINGLE_VIRT_DECL(ak5558_channel2_mux_enum, + ak5558_channel_select_texts); + +static const struct snd_kcontrol_new ak5558_channel2_mux_control = + SOC_DAPM_ENUM("Ch2 Switch", ak5558_channel2_mux_enum); + +static SOC_ENUM_SINGLE_VIRT_DECL(ak5558_channel3_mux_enum, + ak5558_channel_select_texts); + +static const struct snd_kcontrol_new ak5558_channel3_mux_control = + SOC_DAPM_ENUM("Ch3 Switch", ak5558_channel3_mux_enum); + +static SOC_ENUM_SINGLE_VIRT_DECL(ak5558_channel4_mux_enum, + ak5558_channel_select_texts); + +static const struct snd_kcontrol_new ak5558_channel4_mux_control = + SOC_DAPM_ENUM("Ch4 Switch", ak5558_channel4_mux_enum); + +static SOC_ENUM_SINGLE_VIRT_DECL(ak5558_channel5_mux_enum, + ak5558_channel_select_texts); + +static const struct snd_kcontrol_new ak5558_channel5_mux_control = + SOC_DAPM_ENUM("Ch5 Switch", ak5558_channel5_mux_enum); + +static SOC_ENUM_SINGLE_VIRT_DECL(ak5558_channel6_mux_enum, + ak5558_channel_select_texts); + +static const struct snd_kcontrol_new ak5558_channel6_mux_control = + SOC_DAPM_ENUM("Ch6 Switch", ak5558_channel6_mux_enum); + +static SOC_ENUM_SINGLE_VIRT_DECL(ak5558_channel7_mux_enum, + ak5558_channel_select_texts); + +static const struct snd_kcontrol_new ak5558_channel7_mux_control = + SOC_DAPM_ENUM("Ch7 Switch", ak5558_channel7_mux_enum); + +static SOC_ENUM_SINGLE_VIRT_DECL(ak5558_channel8_mux_enum, + ak5558_channel_select_texts); + +static const struct snd_kcontrol_new ak5558_channel8_mux_control = + SOC_DAPM_ENUM("Ch8 Switch", ak5558_channel8_mux_enum); + +static const struct snd_soc_dapm_widget ak5558_dapm_widgets[] = { + /* Analog Input */ + SND_SOC_DAPM_INPUT("AIN1"), + SND_SOC_DAPM_INPUT("AIN2"), + SND_SOC_DAPM_INPUT("AIN3"), + SND_SOC_DAPM_INPUT("AIN4"), + SND_SOC_DAPM_INPUT("AIN5"), + SND_SOC_DAPM_INPUT("AIN6"), + SND_SOC_DAPM_INPUT("AIN7"), + SND_SOC_DAPM_INPUT("AIN8"), + + SND_SOC_DAPM_MUX("AK5558 Ch1 Enable", SND_SOC_NOPM, 0, 0, + &ak5558_channel1_mux_control), + SND_SOC_DAPM_MUX("AK5558 Ch2 Enable", SND_SOC_NOPM, 0, 0, + &ak5558_channel2_mux_control), + SND_SOC_DAPM_MUX("AK5558 Ch3 Enable", SND_SOC_NOPM, 0, 0, + &ak5558_channel3_mux_control), + SND_SOC_DAPM_MUX("AK5558 Ch4 Enable", SND_SOC_NOPM, 0, 0, + &ak5558_channel4_mux_control), + SND_SOC_DAPM_MUX("AK5558 Ch5 Enable", SND_SOC_NOPM, 0, 0, + &ak5558_channel5_mux_control), + SND_SOC_DAPM_MUX("AK5558 Ch6 Enable", SND_SOC_NOPM, 0, 0, + &ak5558_channel6_mux_control), + SND_SOC_DAPM_MUX("AK5558 Ch7 Enable", SND_SOC_NOPM, 0, 0, + &ak5558_channel7_mux_control), + SND_SOC_DAPM_MUX("AK5558 Ch8 Enable", SND_SOC_NOPM, 0, 0, + &ak5558_channel8_mux_control), + + SND_SOC_DAPM_ADC("ADC Ch1", NULL, AK5558_00_POWER_MANAGEMENT1, 0, 0), + SND_SOC_DAPM_ADC("ADC Ch2", NULL, AK5558_00_POWER_MANAGEMENT1, 1, 0), + SND_SOC_DAPM_ADC("ADC Ch3", NULL, AK5558_00_POWER_MANAGEMENT1, 2, 0), + SND_SOC_DAPM_ADC("ADC Ch4", NULL, AK5558_00_POWER_MANAGEMENT1, 3, 0), + SND_SOC_DAPM_ADC("ADC Ch5", NULL, AK5558_00_POWER_MANAGEMENT1, 4, 0), + SND_SOC_DAPM_ADC("ADC Ch6", NULL, AK5558_00_POWER_MANAGEMENT1, 5, 0), + SND_SOC_DAPM_ADC("ADC Ch7", NULL, AK5558_00_POWER_MANAGEMENT1, 6, 0), + SND_SOC_DAPM_ADC("ADC Ch8", NULL, AK5558_00_POWER_MANAGEMENT1, 7, 0), + + SND_SOC_DAPM_AIF_OUT("SDTO", "Capture", 0, SND_SOC_NOPM, 0, 0), +}; + +static const struct snd_soc_dapm_route ak5558_intercon[] = { + {"AK5558 Ch1 Enable", "On", "AIN1"}, + {"ADC Ch1", NULL, "AK5558 Ch1 Enable"}, + {"SDTO", NULL, "ADC Ch1"}, + + {"AK5558 Ch2 Enable", "On", "AIN2"}, + {"ADC Ch2", NULL, "AK5558 Ch2 Enable"}, + {"SDTO", NULL, "ADC Ch2"}, + + {"AK5558 Ch3 Enable", "On", "AIN3"}, + {"ADC Ch3", NULL, "AK5558 Ch3 Enable"}, + {"SDTO", NULL, "ADC Ch3"}, + + {"AK5558 Ch4 Enable", "On", "AIN4"}, + {"ADC Ch4", NULL, "AK5558 Ch4 Enable"}, + {"SDTO", NULL, "ADC Ch4"}, + + {"AK5558 Ch5 Enable", "On", "AIN5"}, + {"ADC Ch5", NULL, "AK5558 Ch5 Enable"}, + {"SDTO", NULL, "ADC Ch5"}, + + {"AK5558 Ch6 Enable", "On", "AIN6"}, + {"ADC Ch6", NULL, "AK5558 Ch6 Enable"}, + {"SDTO", NULL, "ADC Ch6"}, + + {"AK5558 Ch7 Enable", "On", "AIN7"}, + {"ADC Ch7", NULL, "AK5558 Ch7 Enable"}, + {"SDTO", NULL, "ADC Ch7"}, + + {"AK5558 Ch8 Enable", "On", "AIN8"}, + {"ADC Ch8", NULL, "AK5558 Ch8 Enable"}, + {"SDTO", NULL, "ADC Ch8"}, +}; + +static int ak5558_set_mcki(struct snd_soc_codec *codec, int fs, int rclk) +{ + u8 mode; +#ifndef AK5558_SLAVE_CKS_AUTO + int mcki_rate; +#endif + + dev_dbg(codec->dev, "%s fs=%d rclk=%d\n", __func__, fs, rclk); + + mode = snd_soc_read(codec, AK5558_02_CONTROL1); + mode &= ~AK5558_CKS; + +#ifdef AK5558_SLAVE_CKS_AUTO + mode |= AK5558_CKS_AUTO; +#else + if (fs != 0 && rclk != 0) { + if (rclk % fs) + return -EINVAL; + mcki_rate = rclk / fs; + + if (fs > 400000) { + switch (mcki_rate) { + case 32: + mode |= AK5558_CKS_32FS_768KHZ; + break; + case 48: + mode |= AK5558_CKS_48FS_768KHZ; + break; + case 64: + mode |= AK5558_CKS_64FS_768KHZ; + break; + default: + return -EINVAL; + } + } else if (fs > 200000) { + switch (mcki_rate) { + case 64: + mode |= AK5558_CKS_64FS_384KHZ; + break; + case 96: + mode |= AK5558_CKS_96FS_384KHZ; + break; + default: + return -EINVAL; + } + } else if (fs > 108000) { + switch (mcki_rate) { + case 128: + mode |= AK5558_CKS_128FS_192KHZ; + break; + case 192: + mode |= AK5558_CKS_192FS_192KHZ; + break; + default: + return -EINVAL; + } + } else if (fs > 54000) { + switch (mcki_rate) { + case 256: + mode |= AK5558_CKS_256FS_96KHZ; + break; + case 384: + mode |= AK5558_CKS_384FS_96KHZ; + break; + default: + return -EINVAL; + } + } else { + switch (mcki_rate) { + case 256: + mode |= AK5558_CKS_256FS_48KHZ; + break; + case 384: + mode |= AK5558_CKS_384FS_48KHZ; + break; + case 512: + mode |= AK5558_CKS_512FS_48KHZ; + break; + case 768: + mode |= AK5558_CKS_768FS_48KHZ; + break; + case 1024: + if (fs > 32000) + return -EINVAL; + mode |= AK5558_CKS_1024FS_16KHZ; + break; + default: + return -EINVAL; + } + } + } +#endif + snd_soc_update_bits(codec, AK5558_02_CONTROL1, AK5558_CKS, mode); + + return 0; +} + +static int ak5558_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec); + u8 bits; + int pcm_width = max(params_physical_width(params), ak5558->slot_width); + + dev_dbg(dai->dev, "%s(%d)\n", __func__, __LINE__); + + /* set master/slave audio interface */ + bits = snd_soc_read(codec, AK5558_02_CONTROL1); + bits &= ~AK5558_BITS; + + switch (pcm_width) { + case 16: + bits |= AK5558_DIF_24BIT_MODE; + break; + case 32: + bits |= AK5558_DIF_32BIT_MODE; + break; + default: + return -EINVAL; + } + + ak5558->fs = params_rate(params); + snd_soc_update_bits(codec, AK5558_02_CONTROL1, AK5558_BITS, bits); + + ak5558_set_mcki(codec, ak5558->fs, ak5558->rclk); + + return 0; +} + +static int ak5558_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, + unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = dai->codec; + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec); + + dev_dbg(dai->dev, "%s(%d)\n", __func__, __LINE__); + + ak5558->rclk = freq; + ak5558_set_mcki(codec, ak5558->fs, ak5558->rclk); + + return 0; +} + +static int ak5558_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_codec *codec = dai->codec; + u8 format; + + dev_dbg(dai->dev, "%s(%d)\n", __func__, __LINE__); + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + break; + case SND_SOC_DAIFMT_CBM_CFM: +#ifdef AK5558_SLAVE_CKS_AUTO + break; +#else + return -EINVAL; +#endif + case SND_SOC_DAIFMT_CBS_CFM: + case SND_SOC_DAIFMT_CBM_CFS: + default: + dev_err(codec->dev, "Clock mode unsupported"); + return -EINVAL; + } + + /* set master/slave audio interface */ + format = snd_soc_read(codec, AK5558_02_CONTROL1); + format &= ~AK5558_DIF; + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + format |= AK5558_DIF_I2S_MODE; + break; + case SND_SOC_DAIFMT_LEFT_J: + format |= AK5558_DIF_MSB_MODE; + break; + case SND_SOC_DAIFMT_DSP_B: + format |= AK5558_DIF_MSB_MODE; + break; + default: + return -EINVAL; + } + + snd_soc_update_bits(codec, AK5558_02_CONTROL1, AK5558_DIF, format); + + return 0; +} + +static int ak5558_set_dai_mute(struct snd_soc_dai *dai, int mute) +{ + struct snd_soc_codec *codec = dai->codec; + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec); + int ndt; + + if (mute) { + ndt = 0; + if (ak5558->fs != 0) + ndt = 583000 / ak5558->fs; + if (ndt < 5) + ndt = 5; + msleep(ndt); + } + + return 0; +} + +static int ak5558_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + dev_dbg(codec->dev, "%s bias level=%d\n", __func__, (int)level); + + switch (level) { + case SND_SOC_BIAS_ON: + case SND_SOC_BIAS_PREPARE: + case SND_SOC_BIAS_STANDBY: + break; + case SND_SOC_BIAS_OFF: + snd_soc_write(codec, AK5558_00_POWER_MANAGEMENT1, 0x00); + break; + } + return 0; +} + +static int ak5558_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask, + unsigned int rx_mask, int slots, + int slot_width) +{ + struct snd_soc_codec *codec = dai->codec; + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec); + int tdm_mode = 0; + int reg; + + ak5558->slots = slots; + ak5558->slot_width = slot_width; + + switch (slots * slot_width) { + case 128: + tdm_mode = AK5558_MODE_TDM128; + break; + case 256: + tdm_mode = AK5558_MODE_TDM256; + break; + case 512: + tdm_mode = AK5558_MODE_TDM512; + break; + default: + tdm_mode = AK5558_MODE_NORMAL; + break; + } + + reg = snd_soc_read(codec, AK5558_03_CONTROL2); + reg &= ~AK5558_MODE_BITS; + reg |= tdm_mode; + snd_soc_write(codec, AK5558_03_CONTROL2, reg); + + return 0; +} + +#define AK5558_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\ + SNDRV_PCM_FMTBIT_S24_LE |\ + SNDRV_PCM_FMTBIT_S32_LE) + +static const unsigned int ak5558_rates[] = { + 8000, 11025, 16000, 22050, + 32000, 44100, 48000, 88200, + 96000, 176400, 192000, 352800, + 384000, 705600, 768000, 1411200, + 2822400, +}; + +static const struct snd_pcm_hw_constraint_list ak5558_rate_constraints = { + .count = ARRAY_SIZE(ak5558_rates), + .list = ak5558_rates, +}; + +static int ak5558_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + int ret; + + ret = snd_pcm_hw_constraint_list(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, + &ak5558_rate_constraints); + return ret; +} + +static struct snd_soc_dai_ops ak5558_dai_ops = { + .startup = ak5558_startup, + .hw_params = ak5558_hw_params, + .set_sysclk = ak5558_set_dai_sysclk, + .set_fmt = ak5558_set_dai_fmt, + .digital_mute = ak5558_set_dai_mute, + .set_tdm_slot = ak5558_set_tdm_slot, +}; + +static struct snd_soc_dai_driver ak5558_dai = { + .name = "ak5558-aif", + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 8, + .rates = SNDRV_PCM_RATE_KNOT, + .formats = AK5558_FORMATS, + }, + .ops = &ak5558_dai_ops, +}; + +static int ak5558_init_reg(struct snd_soc_codec *codec) +{ + int ret; + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec); + + dev_dbg(codec->dev, "%s(%d)\n", __func__, __LINE__); + + usleep_range(10000, 11000); + if (gpio_is_valid(ak5558->pdn_gpio)) { + gpio_set_value_cansleep(ak5558->pdn_gpio, 0); + usleep_range(1000, 2000); + gpio_set_value_cansleep(ak5558->pdn_gpio, 1); + usleep_range(1000, 2000); + } + + ret = snd_soc_write(codec, AK5558_00_POWER_MANAGEMENT1, 0x0); + if (ret < 0) + return ret; + + ret = snd_soc_update_bits(codec, AK5558_02_CONTROL1, AK5558_CKS, + AK5558_CKS_AUTO); + if (ret < 0) + return ret; + + return 0; +} + +static int ak5558_probe(struct snd_soc_codec *codec) +{ + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec); + int ret = 0; + + dev_dbg(codec->dev, "%s(%d)\n", __func__, __LINE__); + + ret = ak5558_init_reg(codec); + + ak5558->fs = 48000; + ak5558->rclk = 0; + + return ret; +} + +static int ak5558_remove(struct snd_soc_codec *codec) +{ + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec); + + ak5558_set_bias_level(codec, SND_SOC_BIAS_OFF); + + if (gpio_is_valid(ak5558->pdn_gpio)) { + gpio_set_value_cansleep(ak5558->pdn_gpio, 0); + usleep_range(1000, 2000); + } + + return 0; +} + +#ifdef CONFIG_PM +static int ak5558_runtime_suspend(struct device *dev) +{ + struct ak5558_priv *ak5558 = dev_get_drvdata(dev); + + regcache_cache_only(ak5558->regmap, true); + + if (gpio_is_valid(ak5558->pdn_gpio)) { + gpio_set_value_cansleep(ak5558->pdn_gpio, 0); + usleep_range(1000, 2000); + } + + return 0; +} + +static int ak5558_runtime_resume(struct device *dev) +{ + struct ak5558_priv *ak5558 = dev_get_drvdata(dev); + + if (gpio_is_valid(ak5558->pdn_gpio)) { + gpio_set_value_cansleep(ak5558->pdn_gpio, 0); + usleep_range(1000, 2000); + gpio_set_value_cansleep(ak5558->pdn_gpio, 1); + usleep_range(1000, 2000); + } + + regcache_cache_only(ak5558->regmap, false); + regcache_mark_dirty(ak5558->regmap); + + return regcache_sync(ak5558->regmap); +} +#endif + +const struct dev_pm_ops ak5558_pm = { + SET_RUNTIME_PM_OPS(ak5558_runtime_suspend, ak5558_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) +}; + +struct snd_soc_codec_driver soc_codec_dev_ak5558 = { + .probe = ak5558_probe, + .remove = ak5558_remove, + .idle_bias_off = true, + .set_bias_level = ak5558_set_bias_level, + + .component_driver = { + .controls = ak5558_snd_controls, + .num_controls = ARRAY_SIZE(ak5558_snd_controls), + .dapm_widgets = ak5558_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(ak5558_dapm_widgets), + .dapm_routes = ak5558_intercon, + .num_dapm_routes = ARRAY_SIZE(ak5558_intercon), + }, +}; + +static const struct regmap_config ak5558_regmap = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = AK5558_05_DSD, + .reg_defaults = ak5558_reg, + .num_reg_defaults = ARRAY_SIZE(ak5558_reg), + .cache_type = REGCACHE_RBTREE, +}; + +static int ak5558_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct device_node *np = i2c->dev.of_node; + struct ak5558_priv *ak5558; + int ret = 0; + + dev_err(&i2c->dev, "%s(%d)\n", __func__, __LINE__); + + ak5558 = devm_kzalloc(&i2c->dev, sizeof(struct ak5558_priv), + GFP_KERNEL); + if (!ak5558) + return -ENOMEM; + + ak5558->regmap = devm_regmap_init_i2c(i2c, &ak5558_regmap); + if (IS_ERR(ak5558->regmap)) + return PTR_ERR(ak5558->regmap); + + i2c_set_clientdata(i2c, ak5558); + ak5558->i2c = i2c; + + ak5558->pdn_gpio = of_get_named_gpio(np, "ak5558,pdn-gpio", 0); + if (gpio_is_valid(ak5558->pdn_gpio)) { + ret = devm_gpio_request_one(&i2c->dev, ak5558->pdn_gpio, + GPIOF_OUT_INIT_LOW, "ak5558,pdn"); + if (ret) { + dev_err(&i2c->dev, "unable to get pdn gpio\n"); + return ret; + } + } + + ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_ak5558, + &ak5558_dai, 1); + if (ret) + return ret; + + pm_runtime_enable(&i2c->dev); + + return 0; +} + +static int ak5558_i2c_remove(struct i2c_client *client) +{ + snd_soc_unregister_codec(&client->dev); + pm_runtime_disable(&client->dev); + + return 0; +} + +static const struct of_device_id ak5558_i2c_dt_ids[] = { + { .compatible = "asahi-kasei,ak5558"}, + { } +}; + +static const struct i2c_device_id ak5558_i2c_id[] = { + { "ak5558", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ak5558_i2c_id); + +static struct i2c_driver ak5558_i2c_driver = { + .driver = { + .name = "ak5558", + .of_match_table = of_match_ptr(ak5558_i2c_dt_ids), + .pm = &ak5558_pm, + }, + .probe = ak5558_i2c_probe, + .remove = ak5558_i2c_remove, + .id_table = ak5558_i2c_id, +}; + +module_i2c_driver(ak5558_i2c_driver); + +MODULE_AUTHOR("Junichi Wakasugi <wakasugi.jb@om.asahi-kasei.co.jp>"); +MODULE_AUTHOR("Mihai Serban <mihai.serban@nxp.com>"); +MODULE_DESCRIPTION("ASoC AK5558 ADC driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/ak5558.h b/sound/soc/codecs/ak5558.h new file mode 100644 index 0000000..0e40c4a --- /dev/null +++ b/sound/soc/codecs/ak5558.h @@ -0,0 +1,60 @@ +/* + * ak5558.h -- audio driver for AK5558 + * + * Copyright (C) 2016 Asahi Kasei Microdevices Corporation + * Copyright 2018 NXP + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _AK5558_H +#define _AK5558_H + +#define AK5558_00_POWER_MANAGEMENT1 0x00 +#define AK5558_01_POWER_MANAGEMENT2 0x01 +#define AK5558_02_CONTROL1 0x02 +#define AK5558_03_CONTROL2 0x03 +#define AK5558_04_CONTROL3 0x04 +#define AK5558_05_DSD 0x05 + +/* AK5558_02_CONTROL1 fields */ +#define AK5558_DIF 0x02 +#define AK5558_DIF_MSB_MODE (0 << 1) +#define AK5558_DIF_I2S_MODE (1 << 1) + +#define AK5558_BITS 0x04 +#define AK5558_DIF_24BIT_MODE (0 << 2) +#define AK5558_DIF_32BIT_MODE (1 << 2) + +#define AK5558_CKS 0x78 +#define AK5558_CKS_128FS_192KHZ (0 << 3) +#define AK5558_CKS_192FS_192KHZ (1 << 3) +#define AK5558_CKS_256FS_48KHZ (2 << 3) +#define AK5558_CKS_256FS_96KHZ (3 << 3) +#define AK5558_CKS_384FS_96KHZ (4 << 3) +#define AK5558_CKS_384FS_48KHZ (5 << 3) +#define AK5558_CKS_512FS_48KHZ (6 << 3) +#define AK5558_CKS_768FS_48KHZ (7 << 3) +#define AK5558_CKS_64FS_384KHZ (8 << 3) +#define AK5558_CKS_32FS_768KHZ (9 << 3) +#define AK5558_CKS_96FS_384KHZ (10 << 3) +#define AK5558_CKS_48FS_768KHZ (11 << 3) +#define AK5558_CKS_64FS_768KHZ (12 << 3) +#define AK5558_CKS_1024FS_16KHZ (13 << 3) +#define AK5558_CKS_AUTO (15 << 3) + +/* AK5558_03_CONTROL2 fields */ +#define AK5558_MODE_BITS 0x60 +#define AK5558_MODE_NORMAL (0 << 5) +#define AK5558_MODE_TDM128 (1 << 5) +#define AK5558_MODE_TDM256 (2 << 5) +#define AK5558_MODE_TDM512 (3 << 5) + +#endif -- 2.7.4
On Wed, Jan 31, 2018 at 2:57 PM, Daniel Baluta <daniel.baluta@nxp.com> wrote:
AK5558 is a 32-bit, 768 kHZ sampling, differential input ADC for digital audio systems.
Datasheet is available at:
https://www.akm.com/akm/en/file/datasheet/AK5558VN.pdf
Initial patch includes support for normal and TDM modes.
Signed-off-by: Junichi Wakasugi <wakasugi.jb@om.asahi-kasei.co.jp> Signed-off-by: Mihai Serban <mihai.serban@nxp.com> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
4 authors of the code?!
+/* + * ak5558.c -- audio driver for AK5558 ADC + * + * Copyright (C) 2015 Asahi Kasei Microdevices Corporation + * Copyright 2018 NXP
+ * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details.
SPDX instead?
+ */
+#include <linux/module.h> +#include <linux/init.h>
It would be one of them, not both.
+#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/gpio/consumer.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/tlv.h>
+#include <linux/of_gpio.h>
It seems redundant. See below.
+#include <linux/regmap.h> +#include <linux/pm_runtime.h>
Better to keep list ordered.
+/* AK5558 Codec Private Data */ +struct ak5558_priv { + struct snd_soc_codec codec; + struct regmap *regmap; + struct i2c_client *i2c; + int fs; /* Sampling Frequency */ + int rclk; /* Master Clock */
+ int pdn_gpio; /* Power on / Reset GPIO */
struct gpio_desc *power_gpio;
+ int slots; + int slot_width; +};
+static int ak5558_set_mcki(struct snd_soc_codec *codec, int fs, int rclk) +{ + u8 mode; +#ifndef AK5558_SLAVE_CKS_AUTO + int mcki_rate; +#endif +
+ dev_dbg(codec->dev, "%s fs=%d rclk=%d\n", __func__, fs, rclk);
__func__ is useless with dev_dbg(). See the run time options of Dynamic Debug.
+ + mode = snd_soc_read(codec, AK5558_02_CONTROL1); + mode &= ~AK5558_CKS; + +#ifdef AK5558_SLAVE_CKS_AUTO + mode |= AK5558_CKS_AUTO; +#else
+ if (fs != 0 && rclk != 0) {
if (fs && rclk) { ?
+ if (rclk % fs) + return -EINVAL; + mcki_rate = rclk / fs;
+ } +#endif + snd_soc_update_bits(codec, AK5558_02_CONTROL1, AK5558_CKS, mode); + + return 0; +} +
+static int ak5558_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, + unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = dai->codec; + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec); +
+ dev_dbg(dai->dev, "%s(%d)\n", __func__, __LINE__);
Useless. Function tracer can do this for you.
+ + ak5558->rclk = freq; + ak5558_set_mcki(codec, ak5558->fs, ak5558->rclk); + + return 0; +} + +static int ak5558_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_codec *codec = dai->codec; + u8 format; + + dev_dbg(dai->dev, "%s(%d)\n", __func__, __LINE__);
+ default: + dev_err(codec->dev, "Clock mode unsupported");
dai->dev vs. codec->dev?
+ return -EINVAL; + }
+}
+static int ak5558_set_dai_mute(struct snd_soc_dai *dai, int mute) +{ + struct snd_soc_codec *codec = dai->codec; + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec); + int ndt; + + if (mute) {
if (!mute) return 0; ?
+ ndt = 0; + if (ak5558->fs != 0) + ndt = 583000 / ak5558->fs;
+ if (ndt < 5) + ndt = 5; + msleep(ndt);
msleep(max(ndt, 5));
+}
+static int ak5558_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask, + unsigned int rx_mask, int slots, + int slot_width) +{ + struct snd_soc_codec *codec = dai->codec; + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec);
+ int tdm_mode = 0;
Useless assignment.
+ int reg; + + ak5558->slots = slots; + ak5558->slot_width = slot_width; + + switch (slots * slot_width) { + case 128: + tdm_mode = AK5558_MODE_TDM128; + break; + case 256: + tdm_mode = AK5558_MODE_TDM256; + break; + case 512: + tdm_mode = AK5558_MODE_TDM512; + break; + default: + tdm_mode = AK5558_MODE_NORMAL; + break; + }
+ return 0; +}
+static int ak5558_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + int ret; + + ret = snd_pcm_hw_constraint_list(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, + &ak5558_rate_constraints); + return ret;
return snd_pcm_hw_constraint_list(...); ?
+}
+static int ak5558_init_reg(struct snd_soc_codec *codec) +{ + int ret; + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec); +
+ dev_dbg(codec->dev, "%s(%d)\n", __func__, __LINE__);
Useless.
+ usleep_range(10000, 11000);
+ if (gpio_is_valid(ak5558->pdn_gpio)) { + gpio_set_value_cansleep(ak5558->pdn_gpio, 0); + usleep_range(1000, 2000); + gpio_set_value_cansleep(ak5558->pdn_gpio, 1); + usleep_range(1000, 2000); + }
static void ak5558_power_off(...) { if (!ak5558->power_gpiod) return; gpiod_set_value_cansleep(ak5558->power_gpiod, 0); usleep_range(1000, 2000); } static void ak5558_power_on(...) { if (!ak5558->power_gpiod) return; gpiod_set_value_cansleep(ak5558->power_gpiod, 1); usleep_range(1000, 2000); } _power_off(); _power_on();
+ return 0; +}
+static int ak5558_remove(struct snd_soc_codec *codec) +{ + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec); + + ak5558_set_bias_level(codec, SND_SOC_BIAS_OFF); +
+ if (gpio_is_valid(ak5558->pdn_gpio)) { + gpio_set_value_cansleep(ak5558->pdn_gpio, 0); + usleep_range(1000, 2000); + }
_power_off();
+ + return 0; +} +
+#ifdef CONFIG_PM +static int ak5558_runtime_suspend(struct device *dev)
static int __maybe_unused ...
+{ + struct ak5558_priv *ak5558 = dev_get_drvdata(dev); + + regcache_cache_only(ak5558->regmap, true);
+ if (gpio_is_valid(ak5558->pdn_gpio)) { + gpio_set_value_cansleep(ak5558->pdn_gpio, 0); + usleep_range(1000, 2000); + }
_power_off();
+ + return 0; +} +
+static int ak5558_runtime_resume(struct device *dev)
__maybe_unused
+{ + struct ak5558_priv *ak5558 = dev_get_drvdata(dev); +
+ if (gpio_is_valid(ak5558->pdn_gpio)) { + gpio_set_value_cansleep(ak5558->pdn_gpio, 0); + usleep_range(1000, 2000);
Why power off again?
+ gpio_set_value_cansleep(ak5558->pdn_gpio, 1); + usleep_range(1000, 2000); + }
_power_off(); // why? _power_on();
+}
+#endif
ugly #ifdef.
+static int ak5558_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct device_node *np = i2c->dev.of_node; + struct ak5558_priv *ak5558; + int ret = 0; + + dev_err(&i2c->dev, "%s(%d)\n", __func__, __LINE__); + + ak5558 = devm_kzalloc(&i2c->dev, sizeof(struct ak5558_priv), + GFP_KERNEL);
sizeof(*ak5558) ?
+ if (!ak5558) + return -ENOMEM;
+ + ak5558->regmap = devm_regmap_init_i2c(i2c, &ak5558_regmap); + if (IS_ERR(ak5558->regmap)) + return PTR_ERR(ak5558->regmap); + + i2c_set_clientdata(i2c, ak5558); + ak5558->i2c = i2c; +
+ ak5558->pdn_gpio = of_get_named_gpio(np, "ak5558,pdn-gpio", 0); + if (gpio_is_valid(ak5558->pdn_gpio)) { + ret = devm_gpio_request_one(&i2c->dev, ak5558->pdn_gpio, + GPIOF_OUT_INIT_LOW, "ak5558,pdn"); + if (ret) { + dev_err(&i2c->dev, "unable to get pdn gpio\n"); + return ret; + } + }
devm_gpiod_get_optional();
+}
+static const struct i2c_device_id ak5558_i2c_id[] = { + { "ak5558", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ak5558_i2c_id);
Do you really need this? (->probe_new() callback doesn't require above to be present)
+MODULE_AUTHOR("Junichi Wakasugi <wakasugi.jb@om.asahi-kasei.co.jp>"); +MODULE_AUTHOR("Mihai Serban <mihai.serban@nxp.com>");
4 SoBs, 2 Authors. Please, fix accordingly.
+MODULE_DESCRIPTION("ASoC AK5558 ADC driver");
+MODULE_LICENSE("GPL");
It is not consistent with the header.
+ * ak5558.h -- audio driver for AK5558
SPDX? No name of file in the file is a good practice as well.
+ * + * Copyright (C) 2016 Asahi Kasei Microdevices Corporation + * Copyright 2018 NXP
+/* AK5558_02_CONTROL1 fields */ +#define AK5558_DIF 0x02
GENMASK() ?
+#define AK5558_BITS 0x04
Ditto.
+#define AK5558_CKS 0x78
Ditto.
+#define AK5558_MODE_BITS 0x60
Ditto. -- With Best Regards, Andy Shevchenko
Hi Fabio, Andy, Thanks a lot for your comments. I will address them and send v2. Few comments inline. On Mi, 2018-01-31 at 18:12 +0200, Andy Shevchenko wrote:
On Wed, Jan 31, 2018 at 2:57 PM, Daniel Baluta <daniel.baluta@nxp.com> wrote:
AK5558 is a 32-bit, 768 kHZ sampling, differential input ADC for digital audio systems.
Signed-off-by: Junichi Wakasugi <wakasugi.jb@om.asahi-kasei.co.jp> Signed-off-by: Mihai Serban <mihai.serban@nxp.com> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
4 authors of the code?!
The code has a very long history. I will add under each SoB the specific contribution. Mihai got the code from Junichi and reworked it for 4.9. Then Shengjiu and me added various features and cleanups. According to DCO [1] all SoB are valid and required.
+MODULE_AUTHOR("Junichi Wakasugi <wakasugi.jb@om.asahi-kasei.co.jp>"); +MODULE_AUTHOR("Mihai Serban <mihai.serban@nxp.com>"); 4 SoBs, 2 Authors. Please, fix accordingly.
Here I would prefer to list Junichi and Mihai because they were the main contributors. Any other suggestion? thanks, Daniel. [1] [1] https://developercertificate.org/
On Thu, Feb 1, 2018 at 11:05 AM, Daniel Baluta <daniel.baluta@nxp.com> wrote:
Signed-off-by: Junichi Wakasugi <wakasugi.jb@om.asahi-kasei.co.jp> Signed-off-by: Mihai Serban <mihai.serban@nxp.com> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> 4 authors of the code?!
The code has a very long history. I will add under each SoB the specific contribution.
Mihai got the code from Junichi and reworked it for 4.9. Then Shengjiu and me added various features and cleanups.
Any other suggestion?
Yes, please, put detailed credits in commit message to not shock people with so many SoB w/o explanation why. -- With Best Regards, Andy Shevchenko
On Thu, Feb 01, 2018 at 03:20:38PM +0200, Andy Shevchenko wrote:
On Thu, Feb 1, 2018 at 11:05 AM, Daniel Baluta <daniel.baluta@nxp.com> wrote:
Signed-off-by: Junichi Wakasugi <wakasugi.jb@om.asahi-kasei.co.jp> Signed-off-by: Mihai Serban <mihai.serban@nxp.com> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> 4 authors of the code?!
The code has a very long history. I will add under each SoB the specific contribution.
Mihai got the code from Junichi and reworked it for 4.9. Then Shengjiu and me added various features and cleanups.
Any other suggestion?
Yes, please, put detailed credits in commit message to not shock people with so many SoB w/o explanation why.
Honestly the signoffs above are nothing unusual for a driver contributed by a vendor - things are often bouncing around internally for ages and it's good to keep credits for people.
On Thu, Feb 1, 2018 at 3:48 PM, Mark Brown <broonie@kernel.org> wrote:
On Thu, Feb 01, 2018 at 03:20:38PM +0200, Andy Shevchenko wrote:
On Thu, Feb 1, 2018 at 11:05 AM, Daniel Baluta <daniel.baluta@nxp.com> wrote:
Signed-off-by: Junichi Wakasugi <wakasugi.jb@om.asahi-kasei.co.jp> Signed-off-by: Mihai Serban <mihai.serban@nxp.com> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> 4 authors of the code?!
The code has a very long history. I will add under each SoB the specific contribution.
Mihai got the code from Junichi and reworked it for 4.9. Then Shengjiu and me added various features and cleanups.
Any other suggestion?
Yes, please, put detailed credits in commit message to not shock people with so many SoB w/o explanation why.
Honestly the signoffs above are nothing unusual for a driver contributed by a vendor - things are often bouncing around internally for ages and it's good to keep credits for people.
We have Co-developed-by: for the authors. -- With Best Regards, Andy Shevchenko
On Thu, Feb 01, 2018 at 04:46:56PM +0200, Andy Shevchenko wrote:
On Thu, Feb 1, 2018 at 3:48 PM, Mark Brown <broonie@kernel.org> wrote:
Signed-off-by: Junichi Wakasugi <wakasugi.jb@om.asahi-kasei.co.jp> Signed-off-by: Mihai Serban <mihai.serban@nxp.com> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Honestly the signoffs above are nothing unusual for a driver contributed by a vendor - things are often bouncing around internally for ages and it's good to keep credits for people.
We have Co-developed-by: for the authors.
Which doesn't really get miuch use and in this case where it looks like the code has flowed from AKM to NXP the DCO bit is pretty important.
On Fri, Feb 2, 2018 at 5:06 PM, Mark Brown <broonie@kernel.org> wrote:
On Thu, Feb 01, 2018 at 04:46:56PM +0200, Andy Shevchenko wrote:
On Thu, Feb 1, 2018 at 3:48 PM, Mark Brown <broonie@kernel.org> wrote:
> Signed-off-by: Junichi Wakasugi <wakasugi.jb@om.asahi-kasei.co.jp> > Signed-off-by: Mihai Serban <mihai.serban@nxp.com> > Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> > Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Honestly the signoffs above are nothing unusual for a driver contributed by a vendor - things are often bouncing around internally for ages and it's good to keep credits for people.
We have Co-developed-by: for the authors.
Which doesn't really get much use
True... (13 entries so far)
and in this case where it looks like the code has flowed from AKM to NXP the DCO bit is pretty important.
...though it doesn't replace SoB, it adds a bit of information to it (points to the authors of the module). -- With Best Regards, Andy Shevchenko
Hi Daniel, On Wed, Jan 31, 2018 at 10:57 AM, Daniel Baluta <daniel.baluta@nxp.com> wrote:
AK5558 is a 32-bit, 768 kHZ sampling, differential input ADC for digital audio systems.
Datasheet is available at:
https://www.akm.com/akm/en/file/datasheet/AK5558VN.pdf
Initial patch includes support for normal and TDM modes.
Signed-off-by: Junichi Wakasugi <wakasugi.jb@om.asahi-kasei.co.jp> Signed-off-by: Mihai Serban <mihai.serban@nxp.com> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> --- Documentation/devicetree/bindings/sound/ak5558.txt | 20 + sound/soc/codecs/Kconfig | 6 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/ak5558.c | 754 +++++++++++++++++++++ sound/soc/codecs/ak5558.h | 60 ++ 5 files changed, 842 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ak5558.txt
Maybe you should split this is as a separate patch and send it to dt maintainer for review.
create mode 100644 sound/soc/codecs/ak5558.c create mode 100644 sound/soc/codecs/ak5558.h
diff --git a/Documentation/devicetree/bindings/sound/ak5558.txt b/Documentation/devicetree/bindings/sound/ak5558.txt new file mode 100644 index 0000000..c6c71af --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ak5558.txt @@ -0,0 +1,20 @@ +AK5558 8 channel differential 32-bit delta-sigma ADC + +This device supports I2C mode only. + +Required properties: + +- compatible : "asahi-kasei,ak5558" +- reg : The I2C address of the device for I2C. +- asahi-kasei,pdn-gpios: A GPIO specifier for the GPIO controlling + the power down & reset pin. + +Example: + +&i2c { + ak5558: ak5558@10 { + compatible = "asahi-kasei,ak5558"; + reg = <0x10>; + asahi-kasei,pdn-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
Datasheet says it is active low. The driver seems to ignore the GPIO polarity, but device tree should represent the hardware correctly. Better switch the driver to use gpiod API.
--- /dev/null +++ b/sound/soc/codecs/ak5558.c @@ -0,0 +1,754 @@ +/* + * ak5558.c -- audio driver for AK5558 ADC + * + * Copyright (C) 2015 Asahi Kasei Microdevices Corporation + * Copyright 2018 NXP + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details.
You could use SPDX identifier and get rid of the license text.
+ */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/gpio/consumer.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/tlv.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/pm_runtime.h> + +#include "ak5558.h" + +#define AK5558_SLAVE_CKS_AUTO
Why is this define needed?
+ +static int ak5558_set_mcki(struct snd_soc_codec *codec, int fs, int rclk) +{ + u8 mode; +#ifndef AK5558_SLAVE_CKS_AUTO + int mcki_rate; +#endif
You could drop this variable as AK5558_SLAVE_CKS_AUTO seems to be always defined. Then maybe you could remove mcki_rate and AK5558_SLAVE_CKS_AUTO.
+static int ak5558_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + int ret; + + ret = snd_pcm_hw_constraint_list(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, + &ak5558_rate_constraints); + return ret;
You could simply return directly without using the variable 'ret'.
+static int ak5558_init_reg(struct snd_soc_codec *codec) +{ + int ret; + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec); + + dev_dbg(codec->dev, "%s(%d)\n", __func__, __LINE__); + + usleep_range(10000, 11000); + if (gpio_is_valid(ak5558->pdn_gpio)) { + gpio_set_value_cansleep(ak5558->pdn_gpio, 0); + usleep_range(1000, 2000); + gpio_set_value_cansleep(ak5558->pdn_gpio, 1);
Here the GPIO polarity is hardcoded, which can cause issues in systems that has an inverter in this GPIO line. One more generic approach would be to use gpiod_set_value_cansleep() instead, which takes the GPIO polarity read from device tree.
+static int ak5558_probe(struct snd_soc_codec *codec) +{ + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec); + int ret = 0; + + dev_dbg(codec->dev, "%s(%d)\n", __func__, __LINE__);
Better to remove such dev_dbg() lines.
+static int ak5558_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct device_node *np = i2c->dev.of_node; + struct ak5558_priv *ak5558; + int ret = 0; + + dev_err(&i2c->dev, "%s(%d)\n", __func__, __LINE__);
You certainly do not want an error message on every probe :-)
+ ak5558 = devm_kzalloc(&i2c->dev, sizeof(struct ak5558_priv), + GFP_KERNEL); + if (!ak5558) + return -ENOMEM; + + ak5558->regmap = devm_regmap_init_i2c(i2c, &ak5558_regmap); + if (IS_ERR(ak5558->regmap)) + return PTR_ERR(ak5558->regmap); + + i2c_set_clientdata(i2c, ak5558); + ak5558->i2c = i2c; + + ak5558->pdn_gpio = of_get_named_gpio(np, "ak5558,pdn-gpio", 0);
It does not match the property in the binding doc: asahi-kasei,pdn-gpios
+module_i2c_driver(ak5558_i2c_driver); + +MODULE_AUTHOR("Junichi Wakasugi <wakasugi.jb@om.asahi-kasei.co.jp>"); +MODULE_AUTHOR("Mihai Serban <mihai.serban@nxp.com>"); +MODULE_DESCRIPTION("ASoC AK5558 ADC driver"); +MODULE_LICENSE("GPL");
Don't you mean MODULE_LICENSE("GPL v2") instead?
On Wed, Jan 31, 2018 at 6:20 PM, Fabio Estevam <festevam@gmail.com> wrote:
Hi Daniel,
Fabio, +1 to your review. It seems it repeats some of the points I made.
+ ak5558->pdn_gpio = of_get_named_gpio(np, "ak5558,pdn-gpio", 0);
It does not match the property in the binding doc: asahi-kasei,pdn-gpios
Btw, it must be simple "reset" as a widely used for the same purpose. -- With Best Regards, Andy Shevchenko
On Wed, Jan 31, 2018 at 02:20:31PM -0200, Fabio Estevam wrote:
On Wed, Jan 31, 2018 at 10:57 AM, Daniel Baluta <daniel.baluta@nxp.com> wrote:
+ dev_err(&i2c->dev, "%s(%d)\n", __func__, __LINE__);
You certainly do not want an error message on every probe :-)
Sometimes you've just got to be honest with people about their hardware choices! :)
participants (4)
-
Andy Shevchenko -
Daniel Baluta -
Fabio Estevam -
Mark Brown