[alsa-devel] [PATCH] ASoC: Remove IS_ENABLED for INPUT in CS42L52 and WM8962
Now that INPUT is required for the CS42L52 and WM8962 we can remove the IS_ENABLED(INPUT) check in the drivers.
Signed-off-by: Brian Austin brian.austin@cirrus.com --- sound/soc/codecs/cs42l52.c | 12 ------------ sound/soc/codecs/wm8962.c | 12 ------------ 2 files changed, 24 deletions(-)
diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c index 8a7bde4..c0581c5 100644 --- a/sound/soc/codecs/cs42l52.c +++ b/sound/soc/codecs/cs42l52.c @@ -50,11 +50,9 @@ struct cs42l52_private { u8 mclksel; u32 mclk; u8 flags; -#if IS_ENABLED(CONFIG_INPUT) struct input_dev *beep; struct work_struct beep_work; int beep_rate; -#endif };
static const struct reg_default cs42l52_reg_defaults[] = { @@ -962,7 +960,6 @@ static int cs42l52_resume(struct snd_soc_codec *codec) return 0; }
-#if IS_ENABLED(CONFIG_INPUT) static int beep_rates[] = { 261, 522, 585, 667, 706, 774, 889, 1000, 1043, 1200, 1333, 1412, 1600, 1714, 2000, 2182 @@ -1096,15 +1093,6 @@ static void cs42l52_free_beep(struct snd_soc_codec *codec) snd_soc_update_bits(codec, CS42L52_BEEP_TONE_CTL, CS42L52_BEEP_EN_MASK, 0); } -#else -static void cs42l52_init_beep(struct snd_soc_codec *codec) -{ -} - -static void cs42l52_free_beep(struct snd_soc_codec *codec) -{ -} -#endif
static int cs42l52_probe(struct snd_soc_codec *codec) { diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 37986c8..b77e4c3 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -74,11 +74,9 @@ struct wm8962_priv { struct regulator_bulk_data supplies[WM8962_NUM_SUPPLIES]; struct notifier_block disable_nb[WM8962_NUM_SUPPLIES];
-#if IS_ENABLED(CONFIG_INPUT) struct input_dev *beep; struct work_struct beep_work; int beep_rate; -#endif
#ifdef CONFIG_GPIOLIB struct gpio_chip gpio_chip; @@ -3145,7 +3143,6 @@ int wm8962_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack) } EXPORT_SYMBOL_GPL(wm8962_mic_detect);
-#if IS_ENABLED(CONFIG_INPUT) static int beep_rates[] = { 500, 1000, 2000, 4000, }; @@ -3277,15 +3274,6 @@ static void wm8962_free_beep(struct snd_soc_codec *codec)
snd_soc_update_bits(codec, WM8962_BEEP_GENERATOR_1, WM8962_BEEP_ENA,0); } -#else -static void wm8962_init_beep(struct snd_soc_codec *codec) -{ -} - -static void wm8962_free_beep(struct snd_soc_codec *codec) -{ -} -#endif
static void wm8962_set_gpio_mode(struct wm8962_priv *wm8962, int gpio) {
On Fri, May 02, 2014 at 09:30:41AM -0500, Brian Austin wrote:
Now that INPUT is required for the CS42L52 and WM8962 we can remove the IS_ENABLED(INPUT) check in the drivers.
Applied, thanks.
participants (2)
-
Brian Austin
-
Mark Brown