[alsa-devel] [PATCH 06/22] ASoC: Ux500: Enable ux500 MSP driver for Device Tree
Register both parts of the MSP driver from Device Tree so that they are probed when Device Tree is enabled. Also, as there is platform data involved, we ensure that there is allocated memory to place the configuration into and that the correct information is extracted from the DT binary.
CC: alsa-devel@alsa-project.org Signed-off-by: Lee Jones lee.jones@linaro.org --- sound/soc/ux500/ux500_msp_dai.c | 6 ++++++ sound/soc/ux500/ux500_msp_i2s.c | 22 +++++++++++++++++++--- 2 files changed, 25 insertions(+), 3 deletions(-)
diff --git a/sound/soc/ux500/ux500_msp_dai.c b/sound/soc/ux500/ux500_msp_dai.c index 772cb19..0f7dd49 100644 --- a/sound/soc/ux500/ux500_msp_dai.c +++ b/sound/soc/ux500/ux500_msp_dai.c @@ -833,10 +833,16 @@ static int __devexit ux500_msp_drv_remove(struct platform_device *pdev) return 0; }
+static const struct of_device_id ux500_msp_i2c_match[] = { + { .compatible = "stericsson,ux500-msp-i2s", }, + {}, +}; + static struct platform_driver msp_i2s_driver = { .driver = { .name = "ux500-msp-i2s", .owner = THIS_MODULE, + .of_match_table = ux500_msp_i2c_match, }, .probe = ux500_msp_drv_probe, .remove = ux500_msp_drv_remove, diff --git a/sound/soc/ux500/ux500_msp_i2s.c b/sound/soc/ux500/ux500_msp_i2s.c index 2cbfc54..5e0bf8c 100644 --- a/sound/soc/ux500/ux500_msp_i2s.c +++ b/sound/soc/ux500/ux500_msp_i2s.c @@ -18,6 +18,7 @@ #include <linux/pinctrl/consumer.h> #include <linux/delay.h> #include <linux/slab.h> +#include <linux/of.h>
#include <mach/hardware.h> #include <mach/msp.h> @@ -692,16 +693,31 @@ int ux500_msp_i2s_init_msp(struct platform_device *pdev, int ret = 0; struct resource *res = NULL; struct i2s_controller *i2s_cont; + struct device_node *np = pdev->dev.of_node; struct ux500_msp *msp;
- dev_dbg(&pdev->dev, "%s: Enter (name: %s, id: %d).\n", __func__, - pdev->name, platform_data->id); - *msp_p = devm_kzalloc(&pdev->dev, sizeof(struct ux500_msp), GFP_KERNEL); msp = *msp_p; if (!msp) return -ENOMEM;
+ if (np) { + if (!platform_data) { + platform_data = devm_kzalloc(&pdev->dev, + sizeof(struct msp_i2s_platform_data), GFP_KERNEL); + if (!platform_data) + ret = -ENOMEM; + } + } else + if (!platform_data) + ret = -EINVAL; + + if (ret) + goto err_res; + + dev_dbg(&pdev->dev, "%s: Enter (name: %s, id: %d).\n", __func__, + pdev->name, platform_data->id); + msp->id = platform_data->id; msp->dev = &pdev->dev; msp->dma_cfg_rx = platform_data->msp_i2s_dma_rx;
On Thu, Aug 9, 2012 at 5:47 PM, Lee Jones lee.jones@linaro.org wrote:
Register both parts of the MSP driver from Device Tree so that they are probed when Device Tree is enabled. Also, as there is platform data involved, we ensure that there is allocated memory to place the configuration into and that the correct information is extracted from the DT binary.
CC: alsa-devel@alsa-project.org Signed-off-by: Lee Jones lee.jones@linaro.org
Looks like it's doing what's intended... Acked-by: Linus Walleij linus.walleij@linaro.org
Yours, Linus Walleij
Ola poke.
On Tue, Aug 14, 2012 at 10:55:59AM +0200, Linus Walleij wrote:
On Thu, Aug 9, 2012 at 5:47 PM, Lee Jones lee.jones@linaro.org wrote:
Register both parts of the MSP driver from Device Tree so that they are probed when Device Tree is enabled. Also, as there is platform data involved, we ensure that there is allocated memory to place the configuration into and that the correct information is extracted from the DT binary.
CC: alsa-devel@alsa-project.org Signed-off-by: Lee Jones lee.jones@linaro.org
Looks like it's doing what's intended... Acked-by: Linus Walleij linus.walleij@linaro.org
Yours, Linus Walleij
participants (2)
-
Lee Jones
-
Linus Walleij