Re: [alsa-devel] redirecting audio to another desktop machine
On 06/21/2010 12:00 PM, alsa-devel-request@alsa-project.org wrote:
Date: Mon, 21 Jun 2010 14:57:00 +0530 From: Viral MehtaViral.Mehta@lntinfotech.com Subject: [alsa-devel] redirecting audio to another desktop machine To: "alsa-devel@alsa-project.org"alsa-devel@alsa-project.org Message-ID: 70376CA23424B34D86F1C7DE6B9973430254343B3E@VSHINMSMBX01.vshodc.lntinfotech.com
Content-Type: text/plain; charset="us-ascii"
Hi list,
I have an embedded device running linux kernel and a minimal filesystem.
I want to access this device remotely which means I should be able to connect to the device just like we do Remote Desktop over ethernet. I am able to do this. I am able to send key-event and framebuffer data whenever my desktop machine connects to the device.
But, I am not able to send audio data on remote side. I am really not sure which device file (/dev/snd/ ???) I should read and capture the data and should send across.... Or can I read the playback device ? I think NO. Do I need to create some kind of virtual sound device ?
Any pointers/suggestions are appreciated.
Thanks, Viral
If you want to reroute an ALSA application over the network, you can use output plugins. Afaik, both PulseAudio and RSound provides plugins for this. You generally want to set up a virtual device in .asoundrc or similar.
-- Hans-Kristian Arntzen
On 06/21/2010 12:00 PM, alsa-devel-request@alsa-project.org wrote:
Date: Mon, 21 Jun 2010 14:57:00 +0530 From: Viral MehtaViral.Mehta@lntinfotech.com Subject: [alsa-devel] redirecting audio to another desktop machine To: "alsa-devel@alsa-project.org"alsa-devel@alsa-project.org Message-ID: 70376CA23424B34D86F1C7DE6B9973430254343B3E@VSHINMSMBX01.vshodc.lntinfotech.com
Content-Type: text/plain; charset="us-ascii"
Hi list,
I have an embedded device running linux kernel and a minimal filesystem.
I want to access this device remotely which means I should be able to connect to the device just like we do Remote Desktop over ethernet. I am able to do this. I am able to send key-event and framebuffer data whenever my desktop machine connects to the device.
But, I am not able to send audio data on remote side. I am really not sure which device file (/dev/snd/ ???) I should read and capture the data and should send across.... Or can I read the playback device ? I think NO. Do I need to create some kind of virtual sound device ?
Any pointers/suggestions are appreciated.
Thanks, Viral
If you want to reroute an ALSA application over the network, you can use output plugins. Afaik, both PulseAudio and RSound provides plugins for this. You generally want to set up a virtual device in .asoundrc or similar.
Hi, thanks for the reply.
Let me make sure I understood it in general..... Is it possible to use same plugins (or any other) if my embedded device is connected to my desktop machine via USB (assuming that I have all USB data transfer mechanism/drivers underlying).
If I setup a virtual device in .asoundrc, audio (or say aplay) applications will pass audio data to my virtual device ?? Do I also need to create any such virtual interface from kernel code as well ?
-- Hans-Kristian Arntzen
_______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
______________________________________________________________________
This Email may contain confidential or privileged information for the intended recipient (s) If you are not the intended recipient, please do not use or disseminate the information, notify the sender and delete it from your system.
______________________________________________________________________
On 06/21/2010 02:10 PM, Viral Mehta wrote:
On 06/21/2010 12:00 PM, alsa-devel-request@alsa-project.org wrote:
Date: Mon, 21 Jun 2010 14:57:00 +0530 From: Viral MehtaViral.Mehta@lntinfotech.com Subject: [alsa-devel] redirecting audio to another desktop machine To: "alsa-devel@alsa-project.org"alsa-devel@alsa-project.org Message-ID: 70376CA23424B34D86F1C7DE6B9973430254343B3E@VSHINMSMBX01.vshodc.lntinfotech.com
Content-Type: text/plain; charset="us-ascii"
Hi list,
I have an embedded device running linux kernel and a minimal filesystem.
I want to access this device remotely which means I should be able to connect to the device just like we do Remote Desktop over ethernet. I am able to do this. I am able to send key-event and framebuffer data whenever my desktop machine connects to the device.
But, I am not able to send audio data on remote side. I am really not sure which device file (/dev/snd/ ???) I should read and capture the data and should send across.... Or can I read the playback device ? I think NO. Do I need to create some kind of virtual sound device ?
Any pointers/suggestions are appreciated.
Thanks, Viral
If you want to reroute an ALSA application over the network, you can use output plugins. Afaik, both PulseAudio and RSound provides plugins for this. You generally want to set up a virtual device in .asoundrc or similar. -- Hans-Kristian Arntzen
Hi, thanks for the reply.
Let me make sure I understood it in general..... Is it possible to use same plugins (or any other) if my embedded device is connected to my desktop machine via USB (assuming that I have all USB data transfer mechanism/drivers underlying).
If I setup a virtual device in .asoundrc, audio (or say aplay) applications will pass audio data to my virtual device ?? Do I also need to create any such virtual interface from kernel code as well ?
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
This Email may contain confidential or privileged information for the intended recipient (s) If you are not the intended recipient, please do not use or disseminate the information, notify the sender and delete it from your system.
With output plugins for ALSA, you can in general do whatever you want. The plugins will receive audio data, and they can do anything. When you say you want to output to your device via USB cable, I'm not sure if that is supplied ootb. I assumed you wanted to output via ethernet. Pulse might do USB, but I'm not sure.
In any case, your output plugin will probably look something like this:
pcm.usb_device { type usb_output # there's no output plugin like this, just a random name to illustrate device "your device" }
Then you could use aplay -Dusb_device.
Hi,
-----Original Message----- From: alsa-devel-bounces@alsa-project.org [mailto:alsa-devel- bounces@alsa-project.org] On Behalf Of Hans-Kristian Arntzen Sent: Monday, June 21, 2010 7:21 PM To: Viral Mehta Cc: alsa-devel@alsa-project.org Subject: Re: [alsa-devel] redirecting audio to another desktop machine
On 06/21/2010 02:10 PM, Viral Mehta wrote:
On 06/21/2010 12:00 PM, alsa-devel-request@alsa-project.org wrote:
Date: Mon, 21 Jun 2010 14:57:00 +0530 From: Viral MehtaViral.Mehta@lntinfotech.com Subject: [alsa-devel] redirecting audio to another desktop machine To: "alsa-devel@alsa-project.org"alsa-devel@alsa-project.org Message-ID:
<70376CA23424B34D86F1C7DE6B9973430254343B3E@VSHINMSMBX01.vshodc.lntinfo tech.com>
Content-Type: text/plain; charset="us-ascii"
Hi list,
I have an embedded device running linux kernel and a minimal
filesystem.
I want to access this device remotely which means I should be able
to connect to the device just like we do Remote Desktop over ethernet.
I am able to do this. I am able to send key-event and framebuffer
data whenever my desktop machine connects to the device.
But, I am not able to send audio data on remote side. I am really not sure which device file (/dev/snd/ ???) I should
read and capture the data and should send across....
Or can I read the playback device ? I think NO. Do I need to create some kind of virtual sound device ?
Any pointers/suggestions are appreciated.
Thanks, Viral
If you want to reroute an ALSA application over the network, you can
use
output plugins. Afaik, both PulseAudio and RSound provides plugins
for
this. You generally want to set up a virtual device in .asoundrc or similar. -- Hans-Kristian Arntzen
Hi, thanks for the reply.
Let me make sure I understood it in general..... Is it possible to
use same plugins (or any other) if my embedded device is connected to my desktop machine via USB (assuming that I have all USB data transfer mechanism/drivers underlying).
If I setup a virtual device in .asoundrc, audio (or say aplay)
applications will pass audio data to my virtual device ??
Do I also need to create any such virtual interface from kernel code
as well ?
With output plugins for ALSA, you can in general do whatever you want. The plugins will receive audio data, and they can do anything. When you say you want to output to your device via USB cable, I'm not sure if that is supplied ootb. I assumed you wanted to output via ethernet. Pulse might do USB, but I'm not sure.
In any case, your output plugin will probably look something like this:
pcm.usb_device { type usb_output # there's no output plugin like this, just a random name to illustrate device "your device" }
Then you could use aplay -Dusb_device.
Thanks for the reply. I think neither Pulse nor Rsound supports USB.
So, I believe I will have to write something mine. First thing as you explained, I would write one plugin.
And then my ALSA user space application will throw data on that virtual Device; so I need to have one kernel space driver as well, right ? Is it in anycase relevant to Sound Dummy (/dev/null) device ?
And in my Virtual Driver, I may do usb_register and then submit data through URBs. Am I on a right path ?
Thanks, Viral
This Email may contain confidential or privileged information for the intended recipient (s) If you are not the intended recipient, please do not use or disseminate the information, notify the sender and delete it from your system.
______________________________________________________________________
'Twas brillig, and Viral Mehta at 25/06/10 09:53 did gyre and gimble:
Thanks for the reply. I think neither Pulse nor Rsound supports USB.
Hmm for clarity, you're talking about a communications from dev board to host via USB, and nothing to do with USB Sound cards here right?
How does that comms work? Is it basically serial or some kind of IP over USB? Is there any ethernet connectivity at all (even separate from the main connection....)
I suspect that no-one can really answer until the details of the dev board->host via USB are a little more clear.
Col
On 06/25/2010 10:53 AM, Viral Mehta wrote:
Hi,
-----Original Message----- From: alsa-devel-bounces@alsa-project.org [mailto:alsa-devel- bounces@alsa-project.org] On Behalf Of Hans-Kristian Arntzen Sent: Monday, June 21, 2010 7:21 PM To: Viral Mehta Cc: alsa-devel@alsa-project.org Subject: Re: [alsa-devel] redirecting audio to another desktop machine
On 06/21/2010 02:10 PM, Viral Mehta wrote:
On 06/21/2010 12:00 PM, alsa-devel-request@alsa-project.org wrote:
Date: Mon, 21 Jun 2010 14:57:00 +0530 From: Viral MehtaViral.Mehta@lntinfotech.com Subject: [alsa-devel] redirecting audio to another desktop machine To: "alsa-devel@alsa-project.org"alsa-devel@alsa-project.org Message-ID:
<70376CA23424B34D86F1C7DE6B9973430254343B3E@VSHINMSMBX01.vshodc.lntinfo tech.com>
Content-Type: text/plain; charset="us-ascii"
Hi list,
I have an embedded device running linux kernel and a minimal
filesystem.
I want to access this device remotely which means I should be able
to connect to the device just like we do Remote Desktop over ethernet.
I am able to do this. I am able to send key-event and framebuffer
data whenever my desktop machine connects to the device.
But, I am not able to send audio data on remote side. I am really not sure which device file (/dev/snd/ ???) I should
read and capture the data and should send across....
Or can I read the playback device ? I think NO. Do I need to create some kind of virtual sound device ?
Any pointers/suggestions are appreciated.
Thanks, Viral
If you want to reroute an ALSA application over the network, you can
use
output plugins. Afaik, both PulseAudio and RSound provides plugins
for
this. You generally want to set up a virtual device in .asoundrc or similar. -- Hans-Kristian Arntzen
Hi, thanks for the reply.
Let me make sure I understood it in general..... Is it possible to
use same plugins (or any other) if my embedded device is connected to my desktop machine via USB (assuming that I have all USB data transfer mechanism/drivers underlying).
If I setup a virtual device in .asoundrc, audio (or say aplay)
applications will pass audio data to my virtual device ??
Do I also need to create any such virtual interface from kernel code
as well ?
With output plugins for ALSA, you can in general do whatever you want. The plugins will receive audio data, and they can do anything. When you say you want to output to your device via USB cable, I'm not sure if that is supplied ootb. I assumed you wanted to output via ethernet. Pulse might do USB, but I'm not sure.
In any case, your output plugin will probably look something like this:
pcm.usb_device { type usb_output # there's no output plugin like this, just a random name to illustrate device "your device" }
Then you could use aplay -Dusb_device.
Thanks for the reply. I think neither Pulse nor Rsound supports USB.
So, I believe I will have to write something mine. First thing as you explained, I would write one plugin.
And then my ALSA user space application will throw data on that virtual Device; so I need to have one kernel space driver as well, right ? Is it in anycase relevant to Sound Dummy (/dev/null) device ?
And in my Virtual Driver, I may do usb_register and then submit data through URBs. Am I on a right path ?
Thanks, Viral
This Email may contain confidential or privileged information for the intended recipient (s) If you are not the intended recipient, please do not use or disseminate the information, notify the sender and delete it from your system.
If you can communicate with your USB device using userspace libraries, I doubt you'd need to make a driver. I don't think /dev/null is relevant here. I assume that usb_register opens up a USB device, so you can communicate with it, if so, then I think you're on the right path. You could probably have a look at the OSS plugin in the alsa-plugins package, and use it as a base to implement your usb output.
participants (3)
-
Colin Guthrie -
Hans-Kristian Arntzen -
Viral Mehta