[alsa-devel] [PATCH v3 0/3] Add runtime PM for SAI digital audio interface
First patch fixes a bug by correctly setting is_slave_mode, then second patch adds support for runtime PM and finally 3rd patch moves clock handling from startup/shtudown function to runtime PM handlers.
Changes since v2: (after Viorel's comments) - no need to check for is_slave_mode when enabling/disabling the clocks because sai->mclk_streams is only set when SAI is in master mode.
Changes since v1: (after Nicolin's comments) - added patch 1 - added fsl_sai_remove in order to call pm_runtime_disable - only disable/enable mclk when SAI in master mode.
Daniel Baluta (2): ASoC: fsl_sai: Update is_slave_mode with correct value ASoC: fsl_sai: Add support for runtime pm
Shengjiu Wang (1): ASoC: fsl_sai: Move clock operation to PM runtime
sound/soc/fsl/fsl_sai.c | 78 +++++++++++++++++++++++++++++++++-------- 1 file changed, 63 insertions(+), 15 deletions(-)
is_slave_mode defaults to false because sai structure that contains it is kzalloc'ed.
Anyhow, if we decide to set the following configuration SAI slave -> SAI master, is_slave_mode will remain set on true altough SAI being master it should be set to false.
Fix this by updating is_slave_mode for each call of fsl_sai_set_dai_fmt.
Signed-off-by: Daniel Baluta daniel.baluta@nxp.com Acked-by: Nicolin Chen nicoleotsuka@gmail.com --- sound/soc/fsl/fsl_sai.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index b563004fb89f..d9df98975cf8 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -268,12 +268,14 @@ static int fsl_sai_set_dai_fmt_tr(struct snd_soc_dai *cpu_dai, case SND_SOC_DAIFMT_CBS_CFS: val_cr2 |= FSL_SAI_CR2_BCD_MSTR; val_cr4 |= FSL_SAI_CR4_FSD_MSTR; + sai->is_slave_mode = false; break; case SND_SOC_DAIFMT_CBM_CFM: sai->is_slave_mode = true; break; case SND_SOC_DAIFMT_CBS_CFM: val_cr2 |= FSL_SAI_CR2_BCD_MSTR; + sai->is_slave_mode = false; break; case SND_SOC_DAIFMT_CBM_CFS: val_cr4 |= FSL_SAI_CR4_FSD_MSTR;
Basically the same actions as for system PM, so make use of pm_runtime_force_suspend/pm_runtime_force_resume.
Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com Signed-off-by: Daniel Baluta daniel.baluta@nxp.com --- sound/soc/fsl/fsl_sai.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index d9df98975cf8..8623b7f882b9 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -9,6 +9,7 @@ #include <linux/dmaengine.h> #include <linux/module.h> #include <linux/of_address.h> +#include <linux/pm_runtime.h> #include <linux/regmap.h> #include <linux/slab.h> #include <linux/time.h> @@ -900,6 +901,8 @@ static int fsl_sai_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, sai);
+ pm_runtime_enable(&pdev->dev); + ret = devm_snd_soc_register_component(&pdev->dev, &fsl_component, &fsl_sai_dai, 1); if (ret) @@ -911,6 +914,11 @@ static int fsl_sai_probe(struct platform_device *pdev) return devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0); }
+static int fsl_sai_remove(struct platform_device *pdev) +{ + pm_runtime_disable(&pdev->dev); +} + static const struct of_device_id fsl_sai_ids[] = { { .compatible = "fsl,vf610-sai", }, { .compatible = "fsl,imx6sx-sai", }, @@ -919,8 +927,8 @@ static const struct of_device_id fsl_sai_ids[] = { }; MODULE_DEVICE_TABLE(of, fsl_sai_ids);
-#ifdef CONFIG_PM_SLEEP -static int fsl_sai_suspend(struct device *dev) +#ifdef CONFIG_PM +static int fsl_sai_runtime_suspend(struct device *dev) { struct fsl_sai *sai = dev_get_drvdata(dev);
@@ -930,7 +938,7 @@ static int fsl_sai_suspend(struct device *dev) return 0; }
-static int fsl_sai_resume(struct device *dev) +static int fsl_sai_runtime_resume(struct device *dev) { struct fsl_sai *sai = dev_get_drvdata(dev);
@@ -942,14 +950,18 @@ static int fsl_sai_resume(struct device *dev) regmap_write(sai->regmap, FSL_SAI_RCSR, 0); return regcache_sync(sai->regmap); } -#endif /* CONFIG_PM_SLEEP */ +#endif /* CONFIG_PM */
static const struct dev_pm_ops fsl_sai_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(fsl_sai_suspend, fsl_sai_resume) + SET_RUNTIME_PM_OPS(fsl_sai_runtime_suspend, + fsl_sai_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) };
static struct platform_driver fsl_sai_driver = { .probe = fsl_sai_probe, + .remove = fsl_sai_remove, .driver = { .name = "fsl-sai", .pm = &fsl_sai_pm_ops,
From: Shengjiu Wang shengjiu.wang@nxp.com
Turn off/on clocks when device enters suspend/resume. This can help saving power.
As a further optimization, we turn off/on mclk only when SAI is in master mode because otherwise mclk is externally provided.
Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com Signed-off-by: Daniel Baluta daniel.baluta@nxp.com --- sound/soc/fsl/fsl_sai.c | 54 +++++++++++++++++++++++++++++++++-------- 1 file changed, 44 insertions(+), 10 deletions(-)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index 8623b7f882b9..7fd1a81ec1aa 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -596,15 +596,8 @@ static int fsl_sai_startup(struct snd_pcm_substream *substream, { struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai); bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; - struct device *dev = &sai->pdev->dev; int ret;
- ret = clk_prepare_enable(sai->bus_clk); - if (ret) { - dev_err(dev, "failed to enable bus clock: %d\n", ret); - return ret; - } - regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE, FSL_SAI_CR3_TRCE);
@@ -621,8 +614,6 @@ static void fsl_sai_shutdown(struct snd_pcm_substream *substream, bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE, 0); - - clk_disable_unprepare(sai->bus_clk); }
static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = { @@ -932,6 +923,14 @@ static int fsl_sai_runtime_suspend(struct device *dev) { struct fsl_sai *sai = dev_get_drvdata(dev);
+ if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_CAPTURE)) + clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[0]]); + + if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_PLAYBACK)) + clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[1]]); + + clk_disable_unprepare(sai->bus_clk); + regcache_cache_only(sai->regmap, true); regcache_mark_dirty(sai->regmap);
@@ -941,6 +940,25 @@ static int fsl_sai_runtime_suspend(struct device *dev) static int fsl_sai_runtime_resume(struct device *dev) { struct fsl_sai *sai = dev_get_drvdata(dev); + int ret; + + ret = clk_prepare_enable(sai->bus_clk); + if (ret) { + dev_err(dev, "failed to enable bus clock: %d\n", ret); + return ret; + } + + if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_PLAYBACK)) { + ret = clk_prepare_enable(sai->mclk_clk[sai->mclk_id[1]]); + if (ret) + goto disable_bus_clk; + } + + if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_CAPTURE)) { + ret = clk_prepare_enable(sai->mclk_clk[sai->mclk_id[0]]); + if (ret) + goto disable_tx_clk; + }
regcache_cache_only(sai->regmap, false); regmap_write(sai->regmap, FSL_SAI_TCSR, FSL_SAI_CSR_SR); @@ -948,7 +966,23 @@ static int fsl_sai_runtime_resume(struct device *dev) usleep_range(1000, 2000); regmap_write(sai->regmap, FSL_SAI_TCSR, 0); regmap_write(sai->regmap, FSL_SAI_RCSR, 0); - return regcache_sync(sai->regmap); + + ret = regcache_sync(sai->regmap); + if (ret) + goto disable_rx_clk; + + return 0; + +disable_rx_clk: + if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_CAPTURE)) + clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[0]]); +disable_tx_clk: + if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_PLAYBACK)) + clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[1]]); +disable_bus_clk: + clk_disable_unprepare(sai->bus_clk); + + return ret; } #endif /* CONFIG_PM */
Hi Mark,
This is the only patch in the series that wasn't applied.
On Mon, Apr 22, 2019 at 10:03 PM Daniel Baluta daniel.baluta@nxp.com wrote:
From: Shengjiu Wang shengjiu.wang@nxp.com
Turn off/on clocks when device enters suspend/resume. This can help saving power.
As a further optimization, we turn off/on mclk only when SAI is in master mode because otherwise mclk is externally provided.
Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com Signed-off-by: Daniel Baluta daniel.baluta@nxp.com
sound/soc/fsl/fsl_sai.c | 54 +++++++++++++++++++++++++++++++++-------- 1 file changed, 44 insertions(+), 10 deletions(-)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index 8623b7f882b9..7fd1a81ec1aa 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -596,15 +596,8 @@ static int fsl_sai_startup(struct snd_pcm_substream *substream, { struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai); bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
struct device *dev = &sai->pdev->dev; int ret;
ret = clk_prepare_enable(sai->bus_clk);
if (ret) {
dev_err(dev, "failed to enable bus clock: %d\n", ret);
return ret;
}
regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE, FSL_SAI_CR3_TRCE);
@@ -621,8 +614,6 @@ static void fsl_sai_shutdown(struct snd_pcm_substream *substream, bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), FSL_SAI_CR3_TRCE, 0);
clk_disable_unprepare(sai->bus_clk);
}
static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = { @@ -932,6 +923,14 @@ static int fsl_sai_runtime_suspend(struct device *dev) { struct fsl_sai *sai = dev_get_drvdata(dev);
if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_CAPTURE))
clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[0]]);
if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_PLAYBACK))
clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[1]]);
clk_disable_unprepare(sai->bus_clk);
regcache_cache_only(sai->regmap, true); regcache_mark_dirty(sai->regmap);
@@ -941,6 +940,25 @@ static int fsl_sai_runtime_suspend(struct device *dev) static int fsl_sai_runtime_resume(struct device *dev) { struct fsl_sai *sai = dev_get_drvdata(dev);
int ret;
ret = clk_prepare_enable(sai->bus_clk);
if (ret) {
dev_err(dev, "failed to enable bus clock: %d\n", ret);
return ret;
}
if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_PLAYBACK)) {
ret = clk_prepare_enable(sai->mclk_clk[sai->mclk_id[1]]);
if (ret)
goto disable_bus_clk;
}
if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_CAPTURE)) {
ret = clk_prepare_enable(sai->mclk_clk[sai->mclk_id[0]]);
if (ret)
goto disable_tx_clk;
} regcache_cache_only(sai->regmap, false); regmap_write(sai->regmap, FSL_SAI_TCSR, FSL_SAI_CSR_SR);
@@ -948,7 +966,23 @@ static int fsl_sai_runtime_resume(struct device *dev) usleep_range(1000, 2000); regmap_write(sai->regmap, FSL_SAI_TCSR, 0); regmap_write(sai->regmap, FSL_SAI_RCSR, 0);
return regcache_sync(sai->regmap);
ret = regcache_sync(sai->regmap);
if (ret)
goto disable_rx_clk;
return 0;
+disable_rx_clk:
if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_CAPTURE))
clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[0]]);
+disable_tx_clk:
if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_PLAYBACK))
clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[1]]);
+disable_bus_clk:
clk_disable_unprepare(sai->bus_clk);
return ret;
} #endif /* CONFIG_PM */
-- 2.17.1
For this series:
Reviewed-by: Viorel Suman viorel.suman@nxp.com
On Lu, 2019-04-22 at 19:02 +0000, Daniel Baluta wrote:
First patch fixes a bug by correctly setting is_slave_mode, then second patch adds support for runtime PM and finally 3rd patch moves clock handling from startup/shtudown function to runtime PM handlers.
Changes since v2: (after Viorel's comments)
- no need to check for is_slave_mode when enabling/disabling the clocks
because sai->mclk_streams is only set when SAI is in master mode.
Changes since v1: (after Nicolin's comments)
- added patch 1
- added fsl_sai_remove in order to call pm_runtime_disable
- only disable/enable mclk when SAI in master mode.
Daniel Baluta (2): ASoC: fsl_sai: Update is_slave_mode with correct value ASoC: fsl_sai: Add support for runtime pm
Shengjiu Wang (1): ASoC: fsl_sai: Move clock operation to PM runtime
sound/soc/fsl/fsl_sai.c | 78 +++++++++++++++++++++++++++++++++-------- 1 file changed, 63 insertions(+), 15 deletions(-)
-- 2.17.1
participants (3)
-
Daniel Baluta
-
Daniel Baluta
-
Viorel Suman