At Sat, 5 Feb 2011 23:13:06 -0500, Joseph Teichman wrote:

This is a trivial patch to enable the E-mu 0204, which is the newest device in the series 0202USB, 0404USB and Tracker Pre.

Signed-off-by: Joseph Teichman <josteich at gmail.com>

Thanks for the patch. But the patch you embedded in the mail is broken due to MUA, and can't be applied cleanly.

Please fix your MUA setup or use an attachment if it's difficult.

thanks,

Takashi

--- alsa-kmirror/usb/mixer.c 2011-01-27 07:09:20.000000000 -0500 +++ alsa-kmirror-jt/usb/mixer.c 2011-02-05 20:42:00.000000000 -0500 @@ -1566,7 +1566,7 @@ cval->initialized = 1; } else { if (type == USB_XU_CLOCK_RATE) {

• /* E-Mu USB 0404/0202/TrackerPre

• /* E-Mu USB 0404/0202/TrackerPre/0204

• samplerate control quirk

*/ cval->min = 0; diff -u ./quirks.c /home/joe/alsa-driver-1.0.24-jt/sound/usb/quirks.c --- ./quirks.c 2011-01-27 07:09:20.000000000 -0500 +++ /home/joe/alsa-driver-1.0.24-jt/sound/usb/quirks.c 2011-02-05 20:40:28.000000000 -0500 @@ -532,7 +532,7 @@ }

/*

• • For E-Mu 0404USB/0202USB/TrackerPre sample rate should be set for device,

• • For E-Mu 0404USB/0202USB/TrackerPre/0204USB sample rate should be

set for device,  * not for interface.  */

@@ -589,6 +589,7 @@ case USB_ID(0x041e, 0x3f02): /* E-Mu 0202 USB */ case USB_ID(0x041e, 0x3f04): /* E-Mu 0404 USB */ case USB_ID(0x041e, 0x3f0a): /* E-Mu Tracker Pre */

• case USB_ID(0x041e, 0x3f19): /* E-Mu 0204 USB */

set_format_emu_quirk(subs, fmt); break; } diff -u ./quirks-table.h /home/joe/alsa-driver-1.0.24-jt/sound/usb/quirks-table.h --- ./quirks-table.h 2011-01-27 07:09:20.000000000 -0500 +++ /home/joe/alsa-driver-1.0.24-jt/sound/usb/quirks-table.h 2011-02-05 20:41:02.000000000 -0500 @@ -79,6 +79,13 @@ .idProduct = 0x3f0a, .bInterfaceClass = USB_CLASS_AUDIO, }, +{

• /* E-Mu 0204 USB */
• .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
• .idVendor = 0x041e,
• .idProduct = 0x3f19,
• .bInterfaceClass = USB_CLASS_AUDIO,

+},

/*  * Logitech QuickCam: bDeviceClass is vendor-specific, so generic interface