[alsa-devel] ALSA:ATMEL: common arch for audio via ssc(patch 2/3: adding directories)
This patch contains: The Kconfig and Makefile, plus the interface files(atmel_ssc_dai and atmel-pcm).
Regards, Sedji
diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig index f743530..030d9f2 100644 --- a/sound/soc/Kconfig +++ b/sound/soc/Kconfig @@ -22,8 +22,7 @@ config SND_SOC_AC97_BUS bool
# All the supported Soc's -source "sound/soc/at32/Kconfig" -source "sound/soc/at91/Kconfig" +source "sound/soc/atmel/Kconfig" source "sound/soc/au1x/Kconfig" source "sound/soc/pxa/Kconfig" source "sound/soc/s3c24xx/Kconfig" diff --git a/sound/soc/Makefile b/sound/soc/Makefile index 933a66d..6a38fc7 100644 --- a/sound/soc/Makefile +++ b/sound/soc/Makefile @@ -1,5 +1,5 @@ snd-soc-core-objs := soc-core.o soc-dapm.o
obj-$(CONFIG_SND_SOC) += snd-soc-core.o -obj-$(CONFIG_SND_SOC) += codecs/ at32/ at91/ pxa/ s3c24xx/ sh/ fsl/ davinci/ +obj-$(CONFIG_SND_SOC) += codecs/ atmel/ pxa/ s3c24xx/ sh/ fsl/ davinci/ obj-$(CONFIG_SND_SOC) += omap/ au1x/ diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig new file mode 100644 index 0000000..6a2e79f --- /dev/null +++ b/sound/soc/atmel/Kconfig @@ -0,0 +1,61 @@ +config SND_ATMEL_SOC + tristate "SoC Audio for the Atmel System-on-Chip" + depends on ARCH_AT91 || AVR32 + help + Say Y or M if you want to add support for codecs attached to + the AT91 SSC interface. You will also need + to select the audio interfaces to support below. + + +config SND_ATMEL_SOC_SSC + tristate + depends on SND_ATMEL_SOC + help + Say Y or M if you want to add support for codecs the + ATMEL SSC interface. You will also needs to select the individual + machine drivers to support below. + +config SND_AT91_SOC_ETI_B1_WM8731 + tristate "SoC Audio support for WM8731-based Endrelia ETI-B1 boards" + depends on SND_ATMEL_SOC && (MACH_ETI_B1 || MACH_ETI_C1) + select SND_AT91_SOC_SSC + select SND_SOC_WM8731 + help + Say Y if you want to add support for SoC audio on WM8731-based + Endrelia Technologies Inc ETI-B1 or ETI-C1 boards. + +config SND_AT91_SOC_ETI_SLAVE + bool "Run codec in slave Mode on Endrelia boards" + depends on SND_AT91_SOC_ETI_B1_WM8731 + default n + help + Say Y if you want to run with the AT91 SSC generating the BCLK + and LRC signals on Endrelia boards. + +config SND_AT91_SOC_SAM9G20_WM8731 + tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board" + depends on ATMEL_SSC && ARCH_AT91SAM9G20 && SND_ATMEL_SOC + select SND_ATMEL_SOC_SSC + select SND_SOC_WM8731 + help + Say Y if you want to add support for SoC audio on WM8731-based + AT91sam9g20 evaluation board. + +config SND_AT32_SOC_PLAYPAQ + tristate "SoC Audio support for PlayPaq with WM8510" + depends on SND_ATMEL_SOC && BOARD_PLAYPAQ + select SND_ATMEL_SOC_SSC + select SND_SOC_WM8510 + help + Say Y or M here if you want to add support for SoC audio + on the LRS PlayPaq. + +config SND_AT32_SOC_PLAYPAQ_SLAVE + bool "Run CODEC on PlayPaq in slave mode" + depends on SND_AT32_SOC_PLAYPAQ + default n + help + Say Y if you want to run with the AT32 SSC generating the BCLK + and FRAME signals on the PlayPaq. Unless you want to play + with the AT32 as the SSC master, you probably want to say N here, + as this will give you better sound quality. diff --git a/sound/soc/atmel/Makefile b/sound/soc/atmel/Makefile new file mode 100644 index 0000000..00c5cd8 --- /dev/null +++ b/sound/soc/atmel/Makefile @@ -0,0 +1,17 @@ +# AT91 Platform Support +snd-soc-atmel-pcm-objs := atmel-pcm.o +snd-soc-atmel_ssc_dai-objs := atmel_ssc_dai.o + +obj-$(CONFIG_SND_ATMEL_SOC) += snd-soc-atmel-pcm.o +obj-$(CONFIG_SND_ATMEL_SOC_SSC) += snd-soc-atmel_ssc_dai.o + +# AT91 Machine Support +snd-soc-eti-b1-wm8731-objs := eti_b1_wm8731.o +snd-soc-sam9g20-wm8731-objs := sam9g20_wm8731.o + +# AT32 Machine Support +snd-soc-playpaq-objs := playpaq_wm8510.o + +obj-$(CONFIG_SND_AT91_SOC_ETI_B1_WM8731) += snd-soc-eti-b1-wm8731.o +obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o +obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o diff --git a/sound/soc/atmel/atmel-pcm.c b/sound/soc/atmel/atmel-pcm.c new file mode 100644 index 0000000..67e9bfd --- /dev/null +++ b/sound/soc/atmel/atmel-pcm.c @@ -0,0 +1,494 @@ +/* + * atmel-pcm.c -- ALSA PCM interface for the Atmel atmel SoC. + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Authors: Sedji Gaouaou sedji.gaouaou@atmel.com + * + * Based on at91-pcm. by: + * Frank Mandarino fmandarino@endrelia.com + * Copyright 2006 Endrelia Technologies Inc. + * + * Based on pxa2xx-pcm.c by: + * + * Author: Nicolas Pitre + * Created: Nov 30, 2004 + * Copyright: (C) 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/dma-mapping.h> +#include <linux/atmel_pdc.h> +#include <linux/atmel-ssc.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> + +#include <mach/hardware.h> + +#include "atmel-pcm.h" + + +/*--------------------------------------------------------------------------*\ + * Hardware definition +*--------------------------------------------------------------------------*/ +/* TODO: These values were taken from the AT91 platform driver, check + * them against real values for AT32 + */ +static const struct snd_pcm_hardware atmel_pcm_hardware = { + .info = SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_PAUSE, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .period_bytes_min = 32, + .period_bytes_max = 8192, + .periods_min = 2, + .periods_max = 1024, + .buffer_bytes_max = 32 * 1024, +}; + + +/*--------------------------------------------------------------------------*\ + * Data types +*--------------------------------------------------------------------------*/ +struct atmel_runtime_data { + struct atmel_pcm_dma_params *params; + dma_addr_t dma_buffer; /* physical address of dma buffer */ + dma_addr_t dma_buffer_end; /* first address beyond DMA buffer */ + size_t period_size; + + dma_addr_t period_ptr; /* physical address of next period */ + int periods; /* period index of period_ptr */ + + /* PDC register save */ + u32 pdc_xpr_save; + u32 pdc_xcr_save; + u32 pdc_xnpr_save; + u32 pdc_xncr_save; +}; + + +/*--------------------------------------------------------------------------*\ + * Helper functions +*--------------------------------------------------------------------------*/ +static int atmel_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, + int stream) +{ + struct snd_pcm_substream *substream = pcm->streams[stream].substream; + struct snd_dma_buffer *buf = &substream->dma_buffer; + size_t size = atmel_pcm_hardware.buffer_bytes_max; + + buf->dev.type = SNDRV_DMA_TYPE_DEV; + buf->dev.dev = pcm->card->dev; + buf->private_data = NULL; + buf->area = dma_alloc_writecombine(pcm->card->dev, size, + &buf->addr, GFP_KERNEL); + /*buf->area = dma_alloc_coherent(pcm->card->dev, size, + &buf->addr, GFP_KERNEL);*/ + printk(KERN_DEBUG "atmel-pcm:" + "preallocate_dma_buffer: area=%p, addr=%p, size=%d\n", + (void *) buf->area, + (void *) buf->addr, + size); + + if (!buf->area) + return -ENOMEM; + + buf->bytes = size; + return 0; +} +/*--------------------------------------------------------------------------*\ + * ISR +*--------------------------------------------------------------------------*/ +static void atmel_pcm_dma_irq(u32 ssc_sr, + struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + static int count = 0; + + count++; + + if (ssc_sr & params->mask->ssc_endbuf) { + pr_warning("atmel-pcm: buffer %s on %s" + " (SSC_SR=%#x, count=%d)\n", + substream->stream == SNDRV_PCM_STREAM_PLAYBACK + ? "underrun" : "overrun", + params->name, ssc_sr, count); + + /* re-start the PDC */ + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_disable); + prtd->period_ptr += prtd->period_size; + if (prtd->period_ptr >= prtd->dma_buffer_end) + prtd->period_ptr = prtd->dma_buffer; + + ssc_writex(params->ssc->regs, params->pdc->xpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xcr, + prtd->period_size / params->pdc_xfer_size); + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_enable); + } + + if (ssc_sr & params->mask->ssc_endx) { + /* Load the PDC next pointer and counter registers */ + prtd->period_ptr += prtd->period_size; + if (prtd->period_ptr >= prtd->dma_buffer_end) + prtd->period_ptr = prtd->dma_buffer; + + ssc_writex(params->ssc->regs, params->pdc->xnpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xncr, + prtd->period_size / params->pdc_xfer_size); + } + + snd_pcm_period_elapsed(substream); +} + + +/*--------------------------------------------------------------------------*\ + * PCM operations +*--------------------------------------------------------------------------*/ +static int atmel_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct atmel_runtime_data *prtd = runtime->private_data; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + + /* this may get called several times by oss emulation + * with different params */ + + snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); + runtime->dma_bytes = params_buffer_bytes(params); + + prtd->params = rtd->dai->cpu_dai->dma_data; + prtd->params->dma_intr_handler = atmel_pcm_dma_irq; + + prtd->dma_buffer = runtime->dma_addr; + prtd->dma_buffer_end = runtime->dma_addr + runtime->dma_bytes; + prtd->period_size = params_period_bytes(params); + + printk(KERN_DEBUG "atmel-pcm: " + "hw_params: DMA for %s initialized " + "(dma_bytes=%u, period_size=%u)\n", + prtd->params->name, + runtime->dma_bytes, + prtd->period_size); + return 0; +} + +static int atmel_pcm_hw_free(struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + + if (params != NULL) { + ssc_writex(params->ssc->regs, SSC_PDC_PTCR, + params->mask->pdc_disable); + prtd->params->dma_intr_handler = NULL; + } + + return 0; +} + +static int atmel_pcm_prepare(struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + + ssc_writex(params->ssc->regs, SSC_IDR, + params->mask->ssc_endx | params->mask->ssc_endbuf); + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_disable); + return 0; +} + +static int atmel_pcm_trigger(struct snd_pcm_substream *substream, + int cmd) +{ + struct snd_pcm_runtime *rtd = substream->runtime; + struct atmel_runtime_data *prtd = rtd->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + int ret = 0; + + printk(KERN_DEBUG "atmel-pcm:buffer_size = %ld," + "dma_area = %p, dma_bytes = %u\n", + rtd->buffer_size, rtd->dma_area, rtd->dma_bytes); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + prtd->period_ptr = prtd->dma_buffer; + + ssc_writex(params->ssc->regs, params->pdc->xpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xcr, + prtd->period_size / params->pdc_xfer_size); + + prtd->period_ptr += prtd->period_size; + ssc_writex(params->ssc->regs, params->pdc->xnpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xncr, + prtd->period_size / params->pdc_xfer_size); + + printk(KERN_DEBUG "atmel-pcm: trigger: " + "period_ptr=%lx, xpr=%u, " + "xcr=%u, xnpr=%u, xncr=%u\n", + (unsigned long)prtd->period_ptr, + ssc_readx(params->ssc->regs, params->pdc->xpr), + ssc_readx(params->ssc->regs, params->pdc->xcr), + ssc_readx(params->ssc->regs, params->pdc->xnpr), + ssc_readx(params->ssc->regs, params->pdc->xncr)); + + ssc_writex(params->ssc->regs, SSC_IER, + params->mask->ssc_endx | params->mask->ssc_endbuf); + ssc_writex(params->ssc->regs, SSC_PDC_PTCR, + params->mask->pdc_enable); + + printk(KERN_DEBUG "sr=%u imr=%u\n", + ssc_readx(params->ssc->regs, SSC_SR), + ssc_readx(params->ssc->regs, SSC_IER)); + break; /* SNDRV_PCM_TRIGGER_START */ + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_disable); + break; + + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_enable); + break; + + default: + ret = -EINVAL; + } + + return ret; +} + +static snd_pcm_uframes_t atmel_pcm_pointer( + struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct atmel_runtime_data *prtd = runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + dma_addr_t ptr; + snd_pcm_uframes_t x; + + ptr = (dma_addr_t) ssc_readx(params->ssc->regs, params->pdc->xpr); + x = bytes_to_frames(runtime, ptr - prtd->dma_buffer); + + if (x == runtime->buffer_size) + x = 0; + + return x; +} + +static int atmel_pcm_open(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct atmel_runtime_data *prtd; + int ret = 0; + + snd_soc_set_runtime_hwparams(substream, &atmel_pcm_hardware); + + /* ensure that buffer size is a multiple of period size */ + ret = snd_pcm_hw_constraint_integer(runtime, + SNDRV_PCM_HW_PARAM_PERIODS); + if (ret < 0) + goto out; + + prtd = kzalloc(sizeof(struct atmel_runtime_data), GFP_KERNEL); + if (prtd == NULL) { + ret = -ENOMEM; + goto out; + } + runtime->private_data = prtd; + + out: + return ret; +} + +static int atmel_pcm_close(struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + + kfree(prtd); + return 0; +} + +static int atmel_pcm_mmap(struct snd_pcm_substream *substream, + struct vm_area_struct *vma) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + + return dma_mmap_writecombine(substream->pcm->card->dev, vma, + runtime->dma_area, + runtime->dma_addr, + runtime->dma_bytes); + /*return remap_pfn_range(vma, vma->vm_start, + substream->dma_buffer.addr >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, vma->vm_page_prot);*/ +} + +struct snd_pcm_ops atmel_pcm_ops = { + .open = atmel_pcm_open, + .close = atmel_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = atmel_pcm_hw_params, + .hw_free = atmel_pcm_hw_free, + .prepare = atmel_pcm_prepare, + .trigger = atmel_pcm_trigger, + .pointer = atmel_pcm_pointer, + .mmap = atmel_pcm_mmap, +}; + + +/*--------------------------------------------------------------------------*\ + * ASoC platform driver +*--------------------------------------------------------------------------*/ +static u64 atmel_pcm_dmamask = 0xffffffff; + +static int atmel_pcm_new(struct snd_card *card, + struct snd_soc_dai *dai, struct snd_pcm *pcm) +{ + int ret = 0; + + if (!card->dev->dma_mask) + card->dev->dma_mask = &atmel_pcm_dmamask; + if (!card->dev->coherent_dma_mask) + card->dev->coherent_dma_mask = 0xffffffff; + + if (dai->playback.channels_min) { + ret = atmel_pcm_preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_PLAYBACK); + if (ret) + goto out; + } + + if (dai->capture.channels_min) { + printk(KERN_DEBUG "at32-pcm:" + "Allocating PCM capture DMA buffer\n"); + ret = atmel_pcm_preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_CAPTURE); + if (ret) + goto out; + } + out: + return ret; +} + +static void atmel_pcm_free_dma_buffers(struct snd_pcm *pcm) +{ + struct snd_pcm_substream *substream; + struct snd_dma_buffer *buf; + int stream; + + for (stream = 0; stream < 2; stream++) { + substream = pcm->streams[stream].substream; + if (!substream) + continue; + + buf = &substream->dma_buffer; + if (!buf->area) + continue; + /*dma_free_coherent(pcm->card->dev, buf->bytes, + buf->area, buf->addr);*/ + dma_free_writecombine(pcm->card->dev, buf->bytes, + buf->area, buf->addr); + buf->area = NULL; + } +} + +#ifdef CONFIG_PM +static int atmel_pcm_suspend(struct platform_device *pdev, + struct snd_soc_dai *dai) +{ + struct snd_pcm_runtime *runtime = dai->runtime; + struct atmel_runtime_data *prtd; + struct atmel_pcm_dma_params *params; + + if (!runtime) + return 0; + + prtd = runtime->private_data; + params = prtd->params; + + /* disable the PDC and save the PDC registers */ + + ssc_writex(params->ssc->regs, PDC_PTCR, params->mask->pdc_disable) + + prtd->pdc_xpr_save = ssc_readx(params->ssc->regs, params->pdc->xpr); + prtd->pdc_xcr_save = ssc_readx(params->ssc->regs, params->pdc->xcr); + prtd->pdc_xnpr_save = ssc_readx(params->ssc->regs, params->pdc->xnpr); + prtd->pdc_xncr_save = ssc_readx(params->ssc->regs, params->pdc->xncr); + + return 0; +} + +static int atmel_pcm_resume(struct platform_device *pdev, + struct snd_soc_dai *dai) +{ + struct snd_pcm_runtime *runtime = dai->runtime; + struct atmel_runtime_data *prtd; + struct atmel_pcm_dma_params *params; + + if (!runtime) + return 0; + + prtd = runtime->private_data; + params = prtd->params; + + /* restore the PDC registers and enable the PDC */ + ssc_writex(params->ssc->regs, params->pdc->xpr, prtd->pdc_xpr_save); + ssc_writex(params->ssc->regs, params->pdc->xcr, prtd->pdc_xcr_save); + ssc_writex(params->ssc->regs, params->pdc->xnpr, prtd->pdc_xnpr_save); + ssc_writex(params->ssc->regs, params->pdc->xncr, prtd->pdc_xncr_save); + + ssc_writex(params->ssc->regs, PDC_PTCR, params->mask->pdc_enable); + return 0; +} +#else +#define atmel_pcm_suspend NULL +#define atmel_pcm_resume NULL +#endif + +struct snd_soc_platform atmel_soc_platform = { + .name = "atmel-audio", + .pcm_ops = &atmel_pcm_ops, + .pcm_new = atmel_pcm_new, + .pcm_free = atmel_pcm_free_dma_buffers, + .suspend = atmel_pcm_suspend, + .resume = atmel_pcm_resume, +}; +EXPORT_SYMBOL_GPL(atmel_soc_platform); + +MODULE_AUTHOR("Sedji Gaouaou sedji.gaouaou@atmel.com"); +MODULE_DESCRIPTION("Atmel PCM module"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/atmel/atmel-pcm.h b/sound/soc/atmel/atmel-pcm.h new file mode 100644 index 0000000..ec9b282 --- /dev/null +++ b/sound/soc/atmel/atmel-pcm.h @@ -0,0 +1,86 @@ +/* + * at91-pcm.h - ALSA PCM interface for the Atmel AT91 SoC. + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Authors: Sedji Gaouaou sedji.gaouaou@atmel.com + * + * Based on at91-pcm. by: + * Frank Mandarino fmandarino@endrelia.com + * Copyright 2006 Endrelia Technologies Inc. + * + * Based on pxa2xx-pcm.c by: + * + * Author: Nicolas Pitre + * Created: Nov 30, 2004 + * Copyright: (C) 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ATMEL_PCM_H +#define _ATMEL_PCM_H + +#include <linux/atmel-ssc.h> + +/* + * Registers and status bits that are required by the PCM driver. + */ +struct atmel_pdc_regs { + unsigned int xpr; /* PDC recv/trans pointer */ + unsigned int xcr; /* PDC recv/trans counter */ + unsigned int xnpr; /* PDC next recv/trans pointer */ + unsigned int xncr; /* PDC next recv/trans counter */ + unsigned int ptcr; /* PDC transfer control */ +}; + +struct atmel_ssc_mask { + u32 ssc_enable; /* SSC recv/trans enable */ + u32 ssc_disable; /* SSC recv/trans disable */ + u32 ssc_endx; /* SSC ENDTX or ENDRX */ + u32 ssc_endbuf; /* SSC TXBUFE or RXBUFF */ + u32 pdc_enable; /* PDC recv/trans enable */ + u32 pdc_disable; /* PDC recv/trans disable */ +}; + +/* + * This structure, shared between the PCM driver and the interface, + * contains all information required by the PCM driver to perform the + * PDC DMA operation. All fields except dma_intr_handler() are initialized + * by the interface. The dms_intr_handler() pointer is set by the PCM + * driver and called by the interface SSC interrupt handler if it is + * non-NULL. + */ +struct atmel_pcm_dma_params { + char *name; /* stream identifier */ + int pdc_xfer_size; /* PDC counter increment in bytes */ + struct ssc_device *ssc; /* SSC device for stream */ + struct atmel_pdc_regs *pdc; /* PDC receive or transmit registers */ + struct atmel_ssc_mask *mask; /* SSC & PDC status bits */ + struct snd_pcm_substream *substream; + void (*dma_intr_handler)(u32, struct snd_pcm_substream *); +}; + +extern struct snd_soc_platform atmel_soc_platform; + + +/* + * SSC register access (since ssc_writel() / ssc_readl() require literal name) + */ +#define ssc_readx(base, reg) (__raw_readl((base) + (reg))) +#define ssc_writex(base, reg, value) __raw_writel((value), (base) + (reg)) + +#endif /* _ATMEL_PCM_H */ diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c new file mode 100644 index 0000000..9ab4653 --- /dev/null +++ b/sound/soc/atmel/atmel_ssc_dai.c @@ -0,0 +1,804 @@ +/* + * atmel_ssc_dai.c -- ALSA SoC ATMEL SSC Audio Layer Platform driver + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Author: Sedji Gaouaou sedji.gaouaou@atmel.com + * ATMEL CORP. + * + * Based on at91-ssc.c by + * Frank Mandarino fmandarino@endrelia.com + * Based on pxa2xx Platform drivers by + * Liam Girdwood liam.girdwood@wolfsonmicro.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/atmel_pdc.h> + +#include <linux/atmel-ssc.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/soc.h> + +#include <mach/hardware.h> + +#include "atmel-pcm.h" +#include "atmel_ssc_dai.h" + + +#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20) +#define NUM_SSC_DEVICES 1 +#else +#define NUM_SSC_DEVICES 3 +#endif + +/* + * SSC PDC registers required by the PCM DMA engine. + */ +static struct atmel_pdc_regs pdc_tx_reg = { + .xpr = ATMEL_PDC_TPR, + .xcr = ATMEL_PDC_TCR, + .xnpr = ATMEL_PDC_TNPR, + .xncr = ATMEL_PDC_TNCR, +}; + +static struct atmel_pdc_regs pdc_rx_reg = { + .xpr = ATMEL_PDC_RPR, + .xcr = ATMEL_PDC_RCR, + .xnpr = ATMEL_PDC_RNPR, + .xncr = ATMEL_PDC_RNCR, +}; + +/* + * SSC & PDC status bits for transmit and receive. + */ +static struct atmel_ssc_mask ssc_tx_mask = { + .ssc_enable = SSC_BIT(CR_TXEN), + .ssc_disable = SSC_BIT(CR_TXDIS), + .ssc_endx = SSC_BIT(SR_ENDTX), + .ssc_endbuf = SSC_BIT(SR_TXBUFE), + .pdc_enable = ATMEL_PDC_TXTEN, + .pdc_disable = ATMEL_PDC_TXTDIS, +}; + +static struct atmel_ssc_mask ssc_rx_mask = { + .ssc_enable = SSC_BIT(CR_RXEN), + .ssc_disable = SSC_BIT(CR_RXDIS), + .ssc_endx = SSC_BIT(SR_ENDRX), + .ssc_endbuf = SSC_BIT(SR_RXBUFF), + .pdc_enable = ATMEL_PDC_RXTEN, + .pdc_disable = ATMEL_PDC_RXTDIS, +}; + + +/* + * DMA parameters. + */ +static struct atmel_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = { + {{ + .name = "SSC0 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC0 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, +#if NUM_SSC_DEVICES == 3 + {{ + .name = "SSC1 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC1 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, + {{ + .name = "SSC2 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC2 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, +#endif +}; + + +static struct atmel_ssc_info ssc_info[NUM_SSC_DEVICES] = { + { + .name = "ssc0", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, +#if NUM_SSC_DEVICES == 3 + { + .name = "ssc1", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, + { + .name = "ssc2", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, +#endif +}; + + +static unsigned int atmel_ssc_sysclk; + +/* + * SSC interrupt handler. Passes PDC interrupts to the DMA + * interrupt handler in the PCM driver. + */ +static irqreturn_t atmel_ssc_interrupt(int irq, void *dev_id) +{ + struct atmel_ssc_info *ssc_p = dev_id; + struct atmel_pcm_dma_params *dma_params; + u32 ssc_sr; + u32 ssc_substream_mask; + int i; + + ssc_sr = (unsigned long)ssc_readl(ssc_p->ssc->regs, SR) + & (unsigned long)ssc_readl(ssc_p->ssc->regs, IMR); + + /* + * Loop through the substreams attached to this SSC. If + * a DMA-related interrupt occurred on that substream, call + * the DMA interrupt handler function, if one has been + * registered in the dma_params structure by the PCM driver. + */ + for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) { + dma_params = ssc_p->dma_params[i]; + + if ((dma_params != NULL) && + (dma_params->dma_intr_handler != NULL)) { + ssc_substream_mask = (dma_params->mask->ssc_endx | + dma_params->mask->ssc_endbuf); + if (ssc_sr & ssc_substream_mask) { + dma_params->dma_intr_handler(ssc_sr, + dma_params-> + substream); + } + } + } + + return IRQ_HANDLED; +} + + +/*-------------------------------------------------------------------------*\ + * DAI functions +*-------------------------------------------------------------------------*/ +/* + * Startup. Only that one substream allowed in each direction. + */ +static int atmel_ssc_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + int dir_mask; + + dev_dbg(rtd->socdev->dev, "ssc_startup: SSC_SR=0x%u\n", + ssc_readl(ssc_p->ssc->regs, SR)); + dir_mask = ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? + SSC_DIR_MASK_PLAYBACK : SSC_DIR_MASK_CAPTURE); + + spin_lock_irq(&ssc_p->lock); + if (ssc_p->dir_mask & dir_mask) { + spin_unlock_irq(&ssc_p->lock); + return -EBUSY; + } + ssc_p->dir_mask |= dir_mask; + spin_unlock_irq(&ssc_p->lock); + + return 0; +} + +/* + * Shutdown. Clear DMA parameters and shutdown the SSC if there + * are no other substreams open. + */ +static void atmel_ssc_shutdown(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + struct atmel_pcm_dma_params *dma_params; + int dir, dir_mask; + + dir = ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? + 0 : 1); + dma_params = ssc_p->dma_params[dir]; + + if (dma_params != NULL) { + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); + dev_dbg(rtd->socdev->dev, "%s disabled SSC_SR=0x%08x\n", + (dir ? "receive" : "transmit"), + ssc_readl(ssc_p->ssc->regs, SR)); + + dma_params->ssc = NULL; + dma_params->substream = NULL; + ssc_p->dma_params[dir] = NULL; + } + + dir_mask = 1 << dir; + + spin_lock_irq(&ssc_p->lock); + ssc_p->dir_mask &= ~dir_mask; + if (!ssc_p->dir_mask) { + /* Shutdown the SSC clock. */ + dev_dbg(rtd->socdev->dev, + "atmel_ssc_dau: Stopping clock\n"); + clk_disable(ssc_p->ssc->clk); + + if (ssc_p->initialized) { + free_irq(ssc_p->ssc->irq, ssc_p); + ssc_p->initialized = 0; + } + + /* Reset the SSC */ + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); + /* Clear the SSC dividers */ + ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0; + } + spin_unlock_irq(&ssc_p->lock); +} + +/* + * Record the SSC system clock rate. + */ +static int atmel_ssc_set_dai_sysclk(struct snd_soc_dai *cpu_dai, + int clk_id, unsigned int freq, int dir) +{ + /* + * The only clock supplied to the SSC is the AT91 master clock, + * which is only used if the SSC is generating BCLK and/or + * LRC clocks. + */ + switch (clk_id) { + case ATMEL_SYSCLK_MCK: + atmel_ssc_sysclk = freq; + break; + default: + return -EINVAL; + } + + return 0; +} + +/* + * Record the DAI format for use in hw_params(). + */ +static int atmel_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai, + unsigned int fmt) +{ + struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; + + ssc_p->daifmt = fmt; + return 0; +} + +/* + * Record SSC clock dividers for use in hw_params(). + */ +static int atmel_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, + int div_id, int div) +{ + struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; + + switch (div_id) { + case ATMEL_SSC_CMR_DIV: + /* + * The same master clock divider is used for both + * transmit and receive, so if a value has already + * been set, it must match this value. + */ + if (ssc_p->cmr_div == 0) + ssc_p->cmr_div = div; + else + if (div != ssc_p->cmr_div) + return -EBUSY; + break; + + case ATMEL_SSC_TCMR_PERIOD: + ssc_p->tcmr_period = div; + break; + + case ATMEL_SSC_RCMR_PERIOD: + ssc_p->rcmr_period = div; + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* + * Configure the SSC. + */ +static int atmel_ssc_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + int id = rtd->dai->cpu_dai->id; + struct atmel_ssc_info *ssc_p = &ssc_info[id]; + struct atmel_pcm_dma_params *dma_params; + int dir, channels, bits; + u32 tfmr, rfmr, tcmr, rcmr; + int start_event; + int ret; + + /* + * Currently, there is only one set of dma params for + * each direction. If more are added, this code will + * have to be changed to select the proper set. + */ + dir = ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? + 0 : 1); + + dma_params = &ssc_dma_params[id][dir]; + dma_params->ssc = ssc_p->ssc; + dma_params->substream = substream; + + ssc_p->dma_params[dir] = dma_params; + + /* + * The cpu_dai->dma_data field is only used to communicate the + * appropriate DMA parameters to the pcm driver hw_params() + * function. It should not be used for other purposes + * as it is common to all substreams. + */ + rtd->dai->cpu_dai->dma_data = dma_params; + + channels = params_channels(params); + + /* + * Determine sample size in bits and the PDC increment. + */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: + bits = 8; + dma_params->pdc_xfer_size = 1; + break; + case SNDRV_PCM_FORMAT_S16_LE: + bits = 16; + dma_params->pdc_xfer_size = 2; + break; + case SNDRV_PCM_FORMAT_S24_LE: + bits = 24; + dma_params->pdc_xfer_size = 4; + break; + case SNDRV_PCM_FORMAT_S32_LE: + bits = 32; + dma_params->pdc_xfer_size = 4; + break; + default: + printk(KERN_WARNING "atmel_ssc_dai: unsupported PCM format"); + return -EINVAL; + } + + /* + * The SSC only supports up to 16-bit samples in I2S format, due + * to the size of the Frame Mode Register FSLEN field. + */ + if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S + && bits > 16) { + printk(KERN_WARNING + "atmel_ssc_dai: sample size %d" + "is too large for I2S\n", bits); + return -EINVAL; + } + + /* + * Compute SSC register settings. + */ + switch (ssc_p->daifmt + & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) { + + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: + /* + * I2S format, SSC provides BCLK and LRC clocks. + * + * The SSC transmit and receive clocks are generated + * from the MCK divider, and the BCLK signal + * is output on the SSC TK line. + */ + rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) + | SSC_BF(RCMR_STTDLY, START_DELAY) + | SSC_BF(RCMR_START, SSC_START_FALLING_RF) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, SSC_CKS_DIV); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE) + | SSC_BF(RFMR_FSLEN, (bits - 1)) + | SSC_BF(RFMR_DATNB, (channels - 1)) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) + | SSC_BF(TCMR_STTDLY, START_DELAY) + | SSC_BF(TCMR_START, SSC_START_FALLING_RF) + | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) + | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) + | SSC_BF(TCMR_CKS, SSC_CKS_DIV); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE) + | SSC_BF(TFMR_FSLEN, (bits - 1)) + | SSC_BF(TFMR_DATNB, (channels - 1)) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: + /* + * I2S format, CODEC supplies BCLK and LRC clocks. + * + * The SSC transmit clock is obtained from the BCLK signal on + * on the TK line, and the SSC receive clock is + * generated from the transmit clock. + * + * For single channel data, one sample is transferred + * on the falling edge of the LRC clock. + * For two channel data, one sample is + * transferred on both edges of the LRC clock. + */ + start_event = ((channels == 1) + ? SSC_START_FALLING_RF + : SSC_START_EDGE_RF); + + rcmr = SSC_BF(RCMR_PERIOD, 0) + | SSC_BF(RCMR_STTDLY, START_DELAY) + | SSC_BF(RCMR_START, start_event) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, SSC_CKS_CLOCK); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_NONE) + | SSC_BF(RFMR_FSLEN, 0) + | SSC_BF(RFMR_DATNB, 0) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, 0) + | SSC_BF(TCMR_STTDLY, START_DELAY) + | SSC_BF(TCMR_START, start_event) + | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) + | SSC_BF(TCMR_CKO, SSC_CKO_NONE) + | SSC_BF(TCMR_CKS, SSC_CKS_PIN); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_NONE) + | SSC_BF(TFMR_FSLEN, 0) + | SSC_BF(TFMR_DATNB, 0) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: + /* + * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks. + * + * The SSC transmit and receive clocks are generated from the + * MCK divider, and the BCLK signal is output + * on the SSC TK line. + */ + rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) + | SSC_BF(RCMR_STTDLY, 1) + | SSC_BF(RCMR_START, SSC_START_RISING_RF) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, SSC_CKS_DIV); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE) + | SSC_BF(RFMR_FSLEN, 0) + | SSC_BF(RFMR_DATNB, (channels - 1)) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) + | SSC_BF(TCMR_STTDLY, 1) + | SSC_BF(TCMR_START, SSC_START_RISING_RF) + | SSC_BF(TCMR_CKI, SSC_CKI_RISING) + | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) + | SSC_BF(TCMR_CKS, SSC_CKS_DIV); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE) + | SSC_BF(TFMR_FSLEN, 0) + | SSC_BF(TFMR_DATNB, (channels - 1)) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: + default: + printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n", + ssc_p->daifmt); + return -EINVAL; + break; + } + dev_dbg(rtd->socdev->dev, "RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", + rcmr, rfmr, tcmr, tfmr); + + if (!ssc_p->initialized) { + + /* Enable PMC peripheral clock for this SSC */ + dev_dbg(rtd->socdev->dev, "atmel_ssc_dai: Starting clock\n"); + clk_enable(ssc_p->ssc->clk); + + /* Reset the SSC and its PDC registers */ + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); + + ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0); + + ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0); + + ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0, + ssc_p->name, ssc_p); + if (ret < 0) { + printk(KERN_WARNING + "atmel_ssc_dai: request_irq failure\n"); + dev_dbg(rtd->socdev->dev, + "Atmel_ssc_dai: Stoping clock\n"); + clk_disable(ssc_p->ssc->clk); + return ret; + } + + ssc_p->initialized = 1; + } + + /* set SSC clock mode register */ + ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div); + + /* set receive clock mode and format */ + ssc_writel(ssc_p->ssc->regs, RCMR, rcmr); + ssc_writel(ssc_p->ssc->regs, RFMR, rfmr); + + /* set transmit clock mode and format */ + ssc_writel(ssc_p->ssc->regs, TCMR, tcmr); + ssc_writel(ssc_p->ssc->regs, TFMR, tfmr); + + dev_dbg(rtd->socdev->dev, + "atmel_ssc_dai,hw_params: SSC initialized\n"); + return 0; +} + + +static int atmel_ssc_prepare(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + struct atmel_pcm_dma_params *dma_params; + int dir; + + dir = ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? + 0 : 1); + + dma_params = ssc_p->dma_params[dir]; + + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable); + + printk(KERN_DEBUG "%s enabled SSC_SR=0x%08x\n", + dir ? "receive" : "transmit", + ssc_readl(ssc_p->ssc->regs, SR)); + return 0; +} + + +#ifdef CONFIG_PM +static int atmel_ssc_suspend(struct platform_device *pdev, + struct snd_soc_dai *cpu_dai) +{ + struct atmel_ssc_info *ssc_p; + + if (!cpu_dai->active) + return 0; + + ssc_p = &ssc_info[cpu_dai->id]; + + /* Save the status register before disabling transmit and receive */ + ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR); + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS)); + + /* Save the current interrupt mask, then disable unmasked interrupts */ + ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR); + ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr); + + ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR); + ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR); + ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR); + ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR); + ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR); + + return 0; +} + + + +static int atmel_ssc_resume(struct platform_device *pdev, + struct snd_soc_dai *cpu_dai) +{ + struct at32_ssc_info *ssc_p; + u32 cr; + + if (!cpu_dai->active) + return 0; + + ssc_p = &ssc_info[cpu_dai->id]; + + /* restore SSC register settings */ + ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr); + ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr); + ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr); + ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr); + ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr); + + /* re-enable interrupts */ + ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr); + + /* Re-enable recieve and transmit as appropriate */ + cr = 0; + cr |= + (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0; + cr |= + (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0; + ssc_writel(ssc_p->ssc->regs, CR, cr); + + return 0; +} +#else /* CONFIG_PM */ +# define atmel_ssc_suspend NULL +# define atmel_ssc_resume NULL +#endif /* CONFIG_PM */ + + +#define ATMEL_SSC_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\ + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\ + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |\ + SNDRV_PCM_RATE_96000) + +#define ATMEL_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = { + { .name = "atmel-ssc0", + .id = 0, + .type = SND_SOC_DAI_PCM, + .suspend = atmel_ssc_suspend, + .resume = atmel_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .hw_params = atmel_ssc_hw_params,}, + .dai_ops = { + .set_sysclk = atmel_ssc_set_dai_sysclk, + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .private_data = &ssc_info[0], + }, +#if NUM_SSC_DEVICES == 3 + { .name = "atmel-ssc1", + .id = 1, + .type = SND_SOC_DAI_PCM, + .suspend = atmel_ssc_suspend, + .resume = atmel_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .hw_params = atmel_ssc_hw_params,}, + .dai_ops = { + .set_sysclk = atmel_ssc_set_dai_sysclk, + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .private_data = &ssc_info[1], + }, + { .name = "atmel-ssc2", + .id = 2, + .type = SND_SOC_DAI_PCM, + .suspend = atmel_ssc_suspend, + .resume = atmel_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .hw_params = atmel_ssc_hw_params,}, + .dai_ops = { + .set_sysclk = atmel_ssc_set_dai_sysclk, + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .private_data = &ssc_info[2], + }, +#endif +}; +EXPORT_SYMBOL_GPL(atmel_ssc_dai); + +/* Module information */ +MODULE_AUTHOR("Sedji Gaouaou, sedji.gaouaou@atmel.com, www.atmel.com"); +MODULE_DESCRIPTION("ATMEL SSC ASoC Interface"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/atmel/atmel_ssc_dai.h b/sound/soc/atmel/atmel_ssc_dai.h new file mode 100644 index 0000000..78d3987 --- /dev/null +++ b/sound/soc/atmel/atmel_ssc_dai.h @@ -0,0 +1,122 @@ +/* + * atmel_ssc_dai.h - ALSA SSC interface for the Atmel SoC + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Author: Sedji Gaouaou sedji.gaouaou@atmel.com + * ATMEL CORP. + * + * Based on at91-ssc.c by + * Frank Mandarino fmandarino@endrelia.com + * Based on pxa2xx Platform drivers by + * Liam Girdwood liam.girdwood@wolfsonmicro.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ATMEL_SSC_DAI_H +#define _ATMEL_SSC_DAI_H + +#include <linux/types.h> +#include <linux/atmel-ssc.h> + +#include "atmel-pcm.h" + +/* SSC system clock ids */ +#define ATMEL_SYSCLK_MCK 0 /* SSC uses AT91 MCK as system clock */ + +/* SSC divider ids */ +#define ATMEL_SSC_CMR_DIV 0 /* MCK divider for BCLK */ +#define ATMEL_SSC_TCMR_PERIOD 1 /* BCLK divider for transmit FS */ +#define ATMEL_SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */ +/* + * SSC direction masks + */ +#define SSC_DIR_MASK_UNUSED 0 +#define SSC_DIR_MASK_PLAYBACK 1 +#define SSC_DIR_MASK_CAPTURE 2 + +/* + * SSC register values that Atmel left out of <linux/atmel-ssc.h>. These + * are expected to be used with SSC_BF + */ +/* START bit field values */ +#define SSC_START_CONTINUOUS 0 +#define SSC_START_TX_RX 1 +#define SSC_START_LOW_RF 2 +#define SSC_START_HIGH_RF 3 +#define SSC_START_FALLING_RF 4 +#define SSC_START_RISING_RF 5 +#define SSC_START_LEVEL_RF 6 +#define SSC_START_EDGE_RF 7 +#define SSS_START_COMPARE_0 8 + +/* CKI bit field values */ +#define SSC_CKI_FALLING 0 +#define SSC_CKI_RISING 1 + +/* CKO bit field values */ +#define SSC_CKO_NONE 0 +#define SSC_CKO_CONTINUOUS 1 +#define SSC_CKO_TRANSFER 2 + +/* CKS bit field values */ +#define SSC_CKS_DIV 0 +#define SSC_CKS_CLOCK 1 +#define SSC_CKS_PIN 2 + +/* FSEDGE bit field values */ +#define SSC_FSEDGE_POSITIVE 0 +#define SSC_FSEDGE_NEGATIVE 1 + +/* FSOS bit field values */ +#define SSC_FSOS_NONE 0 +#define SSC_FSOS_NEGATIVE 1 +#define SSC_FSOS_POSITIVE 2 +#define SSC_FSOS_LOW 3 +#define SSC_FSOS_HIGH 4 +#define SSC_FSOS_TOGGLE 5 + +#define START_DELAY 1 + +struct atmel_ssc_state { + u32 ssc_cmr; + u32 ssc_rcmr; + u32 ssc_rfmr; + u32 ssc_tcmr; + u32 ssc_tfmr; + u32 ssc_sr; + u32 ssc_imr; +}; + + +struct atmel_ssc_info { + char *name; + struct ssc_device *ssc; + spinlock_t lock; /* lock for dir_mask */ + unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */ + unsigned short initialized; /* true if SSC has been initialized */ + unsigned short daifmt; + unsigned short cmr_div; + unsigned short tcmr_period; + unsigned short rcmr_period; + struct atmel_pcm_dma_params *dma_params[2]; + struct atmel_ssc_state ssc_state; +}; +extern struct snd_soc_dai atmel_ssc_dai[]; + +#endif /* _AT91_SSC_DAI_H */
On Fri, Sep 26, 2008 at 11:24:07AM +0200, Sedji Gaouaou wrote:
This patch contains: The Kconfig and Makefile, plus the interface files(atmel_ssc_dai and atmel-pcm).
This all looks very good - I've got some comments below but they're all fairly minor coding style issues. The only ones that really need to be addressed are the commented out code and the use of printk KERN_DEBUG rather than pr_dbg(). However, your mailer appears to have word wrapped the patch so it won't apply - you'll need to reconfigure your MUA to avoid this.
You also need to include a Signed-off-by: line in your message when submitting patches, it's required for code going into the Linux kernel. Documentation/SubmittingPatches contains an explanation of what that's for and the text you'd be agreeing to.
Please also include a more detailed changelog entry in your patch explaining that you're unifying the existing Ateml . Documentation/SubmittingPatches has some guidance on this.
+config SND_ATMEL_SOC_SSC
- tristate
- depends on SND_ATMEL_SOC
- help
Say Y or M if you want to add support for codecs the
...connected to an...
ATMEL SSC interface. You will also needs to select the individual
machine drivers to support below.
- buf->dev.dev = pcm->card->dev;
- buf->private_data = NULL;
- buf->area = dma_alloc_writecombine(pcm->card->dev, size,
&buf->addr, GFP_KERNEL);
- /*buf->area = dma_alloc_coherent(pcm->card->dev, size,
&buf->addr, GFP_KERNEL);*/
Please remove commented code like this.
- printk(KERN_DEBUG "atmel-pcm:"
"preallocate_dma_buffer: area=%p, addr=%p, size=%d\n",
(void *) buf->area,
(void *) buf->addr,
size);
It's probably better to use pr_dbg() for this and most of the other KERN_DEBUG prints - I'd expect the current code would be too verbose for normal operation.
+static int atmel_pcm_mmap(struct snd_pcm_substream *substream,
- struct vm_area_struct *vma)
+{
- struct snd_pcm_runtime *runtime = substream->runtime;
- return dma_mmap_writecombine(substream->pcm->card->dev, vma,
runtime->dma_area,
runtime->dma_addr,
runtime->dma_bytes);
- /*return remap_pfn_range(vma, vma->vm_start,
substream->dma_buffer.addr >> PAGE_SHIFT,
vma->vm_end - vma->vm_start, vma->vm_page_prot);*/
+}
Again, please remove the old, commented code. There's some other instances of this in the patch.
- /*
* Currently, there is only one set of dma params for
* each direction. If more are added, this code will
* have to be changed to select the proper set.
*/
- dir = ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
0 : 1);
I'd really prefer
if (substream->stream == SND_PCM_STREAM_PLAYBACK) dir = 1; else dir = 0;
for clarity.
* For single channel data, one sample is transferred
* on the falling edge of the LRC clock.
* For two channel data, one sample is
* transferred on both edges of the LRC clock.
*/
start_event = ((channels == 1)
? SSC_START_FALLING_RF
: SSC_START_EDGE_RF);
Please expand this to
if (channels == 1) start_event = SSC_START_FALLING_RF; else start_event = SSC_START_EDGE_RF;
+#define ATMEL_SSC_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\
SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\
SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |\
SNDRV_PCM_RATE_96000)
Might be clearer to say SNDRV_PCM_RATE_8000_96000 unless there are some rates which that includes that are missing in there but it's not important either way.
participants (2)
-
Mark Brown
-
Sedji Gaouaou