Running sparse (make C=1) on qmc.c raises a lot of warning such as: ... warning: incorrect type in assignment (different address spaces) expected struct cpm_buf_desc [usertype] *[noderef] __iomem bd got struct cpm_buf_desc [noderef] [usertype] __iomem *txbd_free ...

Indeed, some variable were declared 'type *__iomem var' instead of 'type __iomem *var'.

Use the correct declaration to remove these warnings.

Fixes: 3178d58e0b97 ("soc: fsl: cpm1: Add support for QMC") Signed-off-by: Herve Codina herve.codina@bootlin.com Reviewed-by: Christophe Leroy christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu --- drivers/soc/fsl/qe/qmc.c | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/soc/fsl/qe/qmc.c b/drivers/soc/fsl/qe/qmc.c index b3c292c9a14e..7ad0d77f1740 100644 --- a/drivers/soc/fsl/qe/qmc.c +++ b/drivers/soc/fsl/qe/qmc.c @@ -175,7 +175,7 @@ struct qmc_chan { struct list_head list; unsigned int id; struct qmc *qmc; - void *__iomem s_param; + void __iomem *s_param; enum qmc_mode mode; u64 tx_ts_mask; u64 rx_ts_mask; @@ -203,9 +203,9 @@ struct qmc_chan { struct qmc { struct device *dev; struct tsa_serial *tsa_serial; - void *__iomem scc_regs; - void *__iomem scc_pram; - void *__iomem dpram; + void __iomem *scc_regs; + void __iomem *scc_pram; + void __iomem *dpram; u16 scc_pram_offset; cbd_t __iomem *bd_table; dma_addr_t bd_dma_addr; @@ -218,37 +218,37 @@ struct qmc { struct qmc_chan *chans[64]; };

-static inline void qmc_write16(void *__iomem addr, u16 val) +static inline void qmc_write16(void __iomem *addr, u16 val) { iowrite16be(val, addr); }

-static inline u16 qmc_read16(void *__iomem addr) +static inline u16 qmc_read16(void __iomem *addr) { return ioread16be(addr); }

-static inline void qmc_setbits16(void *__iomem addr, u16 set) +static inline void qmc_setbits16(void __iomem *addr, u16 set) { qmc_write16(addr, qmc_read16(addr) | set); }

-static inline void qmc_clrbits16(void *__iomem addr, u16 clr) +static inline void qmc_clrbits16(void __iomem *addr, u16 clr) { qmc_write16(addr, qmc_read16(addr) & ~clr); }

-static inline void qmc_write32(void *__iomem addr, u32 val) +static inline void qmc_write32(void __iomem *addr, u32 val) { iowrite32be(val, addr); }

-static inline u32 qmc_read32(void *__iomem addr) +static inline u32 qmc_read32(void __iomem *addr) { return ioread32be(addr); }

-static inline void qmc_setbits32(void *__iomem addr, u32 set) +static inline void qmc_setbits32(void __iomem *addr, u32 set) { qmc_write32(addr, qmc_read32(addr) | set); } @@ -318,7 +318,7 @@ int qmc_chan_write_submit(struct qmc_chan *chan, dma_addr_t addr, size_t length, { struct qmc_xfer_desc *xfer_desc; unsigned long flags; - cbd_t *__iomem bd; + cbd_t __iomem *bd; u16 ctrl; int ret;

@@ -374,7 +374,7 @@ static void qmc_chan_write_done(struct qmc_chan *chan) void (*complete)(void *context); unsigned long flags; void *context; - cbd_t *__iomem bd; + cbd_t __iomem *bd; u16 ctrl;

/* @@ -425,7 +425,7 @@ int qmc_chan_read_submit(struct qmc_chan *chan, dma_addr_t addr, size_t length, { struct qmc_xfer_desc *xfer_desc; unsigned long flags; - cbd_t *__iomem bd; + cbd_t __iomem *bd; u16 ctrl; int ret;

@@ -488,7 +488,7 @@ static void qmc_chan_read_done(struct qmc_chan *chan) void (*complete)(void *context, size_t size); struct qmc_xfer_desc *xfer_desc; unsigned long flags; - cbd_t *__iomem bd; + cbd_t __iomem *bd; void *context; u16 datalen; u16 ctrl; @@ -663,7 +663,7 @@ static void qmc_chan_reset_rx(struct qmc_chan *chan) { struct qmc_xfer_desc *xfer_desc; unsigned long flags; - cbd_t *__iomem bd; + cbd_t __iomem *bd; u16 ctrl;

spin_lock_irqsave(&chan->rx_lock, flags); @@ -694,7 +694,7 @@ static void qmc_chan_reset_tx(struct qmc_chan *chan) { struct qmc_xfer_desc *xfer_desc; unsigned long flags; - cbd_t *__iomem bd; + cbd_t __iomem *bd; u16 ctrl;

spin_lock_irqsave(&chan->tx_lock, flags);

In HDLC mode, some status flags related to the data read transfer can be set by the hardware and need to be known by a QMC consumer for further analysis.

Extend the API in order to provide these transfer status flags at the read complete() call.

In TRANSPARENT mode, these flags have no meaning. Keep only one read complete() API and update the consumers working in transparent mode. In this case, the newly introduced flags parameter is simply unused.

Signed-off-by: Herve Codina herve.codina@bootlin.com Reviewed-by: Christophe Leroy christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu --- drivers/soc/fsl/qe/qmc.c | 29 +++++++++++++++++++++++++---- include/soc/fsl/qe/qmc.h | 15 ++++++++++++++- sound/soc/fsl/fsl_qmc_audio.c | 2 +- 3 files changed, 40 insertions(+), 6 deletions(-)

diff --git a/drivers/soc/fsl/qe/qmc.c b/drivers/soc/fsl/qe/qmc.c index 8dc73cc1a83b..2d2a9d88ba6c 100644 --- a/drivers/soc/fsl/qe/qmc.c +++ b/drivers/soc/fsl/qe/qmc.c @@ -166,7 +166,7 @@ struct qmc_xfer_desc { union { void (*tx_complete)(void *context); - void (*rx_complete)(void *context, size_t length); + void (*rx_complete)(void *context, size_t length, unsigned int flags); }; void *context; }; @@ -421,7 +421,8 @@ static void qmc_chan_write_done(struct qmc_chan *chan) }

int qmc_chan_read_submit(struct qmc_chan *chan, dma_addr_t addr, size_t length, - void (*complete)(void *context, size_t length), void *context) + void (*complete)(void *context, size_t length, unsigned int flags), + void *context) { struct qmc_xfer_desc *xfer_desc; unsigned long flags; @@ -454,6 +455,10 @@ int qmc_chan_read_submit(struct qmc_chan *chan, dma_addr_t addr, size_t length, xfer_desc->rx_complete = complete; xfer_desc->context = context;

+ /* Clear previous status flags */ + ctrl &= ~(QMC_BD_RX_L | QMC_BD_RX_F | QMC_BD_RX_LG | QMC_BD_RX_NO | + QMC_BD_RX_AB | QMC_BD_RX_CR); + /* Activate the descriptor */ ctrl |= (QMC_BD_RX_E | QMC_BD_RX_UB); wmb(); /* Be sure to flush data before descriptor activation */ @@ -485,7 +490,7 @@ EXPORT_SYMBOL(qmc_chan_read_submit);

static void qmc_chan_read_done(struct qmc_chan *chan) { - void (*complete)(void *context, size_t size); + void (*complete)(void *context, size_t size, unsigned int flags); struct qmc_xfer_desc *xfer_desc; unsigned long flags; cbd_t __iomem *bd; @@ -527,7 +532,23 @@ static void qmc_chan_read_done(struct qmc_chan *chan)

if (complete) { spin_unlock_irqrestore(&chan->rx_lock, flags); - complete(context, datalen); + + /* + * Avoid conversion between internal hardware flags and + * the software API flags. + * -> Be sure that the software API flags are consistent + * with the hardware flags + */ + BUILD_BUG_ON(QMC_RX_FLAG_HDLC_LAST != QMC_BD_RX_L); + BUILD_BUG_ON(QMC_RX_FLAG_HDLC_FIRST != QMC_BD_RX_F); + BUILD_BUG_ON(QMC_RX_FLAG_HDLC_OVF != QMC_BD_RX_LG); + BUILD_BUG_ON(QMC_RX_FLAG_HDLC_UNA != QMC_BD_RX_NO); + BUILD_BUG_ON(QMC_RX_FLAG_HDLC_ABORT != QMC_BD_RX_AB); + BUILD_BUG_ON(QMC_RX_FLAG_HDLC_CRC != QMC_BD_RX_CR); + + complete(context, datalen, + ctrl & (QMC_BD_RX_L | QMC_BD_RX_F | QMC_BD_RX_LG | + QMC_BD_RX_NO | QMC_BD_RX_AB | QMC_BD_RX_CR)); spin_lock_irqsave(&chan->rx_lock, flags); }

diff --git a/include/soc/fsl/qe/qmc.h b/include/soc/fsl/qe/qmc.h index 3c61a50d2ae2..6f1d6cebc9fe 100644 --- a/include/soc/fsl/qe/qmc.h +++ b/include/soc/fsl/qe/qmc.h @@ -9,6 +9,7 @@ #ifndef __SOC_FSL_QMC_H__ #define __SOC_FSL_QMC_H__

+#include <linux/bits.h> #include <linux/types.h>

struct device_node; @@ -56,8 +57,20 @@ int qmc_chan_set_param(struct qmc_chan *chan, const struct qmc_chan_param *param int qmc_chan_write_submit(struct qmc_chan *chan, dma_addr_t addr, size_t length, void (*complete)(void *context), void *context);

+/* Flags available (ORed) for read complete() flags parameter in HDLC mode. + * No flags are available in transparent mode and the read complete() flags + * parameter has no meaning in transparent mode. + */ +#define QMC_RX_FLAG_HDLC_LAST BIT(11) /* Last in frame */ +#define QMC_RX_FLAG_HDLC_FIRST BIT(10) /* First in frame */ +#define QMC_RX_FLAG_HDLC_OVF BIT(5) /* Data overflow */ +#define QMC_RX_FLAG_HDLC_UNA BIT(4) /* Unaligned (ie. bits received not multiple of 8) */ +#define QMC_RX_FLAG_HDLC_ABORT BIT(3) /* Received an abort sequence (seven consecutive ones) */ +#define QMC_RX_FLAG_HDLC_CRC BIT(2) /* CRC error */ + int qmc_chan_read_submit(struct qmc_chan *chan, dma_addr_t addr, size_t length, - void (*complete)(void *context, size_t length), + void (*complete)(void *context, size_t length, + unsigned int flags), void *context);

#define QMC_CHAN_READ (1<<0) diff --git a/sound/soc/fsl/fsl_qmc_audio.c b/sound/soc/fsl/fsl_qmc_audio.c index 56d6b0b039a2..bfaaa451735b 100644 --- a/sound/soc/fsl/fsl_qmc_audio.c +++ b/sound/soc/fsl/fsl_qmc_audio.c @@ -99,7 +99,7 @@ static void qmc_audio_pcm_write_complete(void *context) snd_pcm_period_elapsed(prtd->substream); }

-static void qmc_audio_pcm_read_complete(void *context, size_t length) +static void qmc_audio_pcm_read_complete(void *context, size_t length, unsigned int flags) { struct qmc_dai_prtd *prtd = context; int ret;

The given example mentions the 'fsl,mode' property whereas the correct property name, the one described, is 'fsl,operational-mode'.

Fix the example to use the correct property name.

Fixes: a9b121327c93 ("dt-bindings: soc: fsl: cpm_qe: Add QMC controller") Signed-off-by: Herve Codina herve.codina@bootlin.com --- .../bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml index ec888f48cac8..450a0354cb1d 100644 --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml @@ -137,7 +137,7 @@ examples: channel@16 { /* Ch16 : First 4 even TS from all routed from TSA */ reg = <16>; - fsl,mode = "transparent"; + fsl,operational-mode = "transparent"; fsl,reverse-data; fsl,tx-ts-mask = <0x00000000 0x000000aa>; fsl,rx-ts-mask = <0x00000000 0x000000aa>; @@ -146,7 +146,7 @@ examples: channel@17 { /* Ch17 : First 4 odd TS from all routed from TSA */ reg = <17>; - fsl,mode = "transparent"; + fsl,operational-mode = "transparent"; fsl,reverse-data; fsl,tx-ts-mask = <0x00000000 0x00000055>; fsl,rx-ts-mask = <0x00000000 0x00000055>; @@ -155,7 +155,7 @@ examples: channel@19 { /* Ch19 : 8 TS (TS 8..15) from all routed from TSA */ reg = <19>; - fsl,mode = "hdlc"; + fsl,operational-mode = "hdlc"; fsl,tx-ts-mask = <0x00000000 0x0000ff00>; fsl,rx-ts-mask = <0x00000000 0x0000ff00>; };

Additional properties in child node should not be allowed.

Prevent them adding 'additionalProperties: false'

Signed-off-by: Herve Codina herve.codina@bootlin.com --- .../devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml | 1 + 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml index 450a0354cb1d..82d9beb48e00 100644 --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml @@ -64,6 +64,7 @@ patternProperties: description: A channel managed by this controller type: object + additionalProperties: false

properties: reg:

The QMC HDLC driver provides support for HDLC using the QMC (QUICC Multichannel Controller) to transfer the HDLC data.

Signed-off-by: Herve Codina herve.codina@bootlin.com Reviewed-by: Christophe Leroy christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu --- drivers/net/wan/Kconfig | 12 + drivers/net/wan/Makefile | 1 + drivers/net/wan/fsl_qmc_hdlc.c | 422 +++++++++++++++++++++++++++++++++ 3 files changed, 435 insertions(+) create mode 100644 drivers/net/wan/fsl_qmc_hdlc.c

diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index dcb069dde66b..8de99f4b647b 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -195,6 +195,18 @@ config FARSYNC To compile this driver as a module, choose M here: the module will be called farsync.

+config FSL_QMC_HDLC + tristate "Freescale QMC HDLC support" + depends on HDLC + depends on CPM_QMC + help + HDLC support using the Freescale QUICC Multichannel Controller (QMC). + + To compile this driver as a module, choose M here: the + module will be called fsl_qmc_hdlc. + + If unsure, say N. + config FSL_UCC_HDLC tristate "Freescale QUICC Engine HDLC support" depends on HDLC diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile index 5bec8fae47f8..f338f4830626 100644 --- a/drivers/net/wan/Makefile +++ b/drivers/net/wan/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_WANXL) += wanxl.o obj-$(CONFIG_PCI200SYN) += pci200syn.o obj-$(CONFIG_PC300TOO) += pc300too.o obj-$(CONFIG_IXP4XX_HSS) += ixp4xx_hss.o +obj-$(CONFIG_FSL_QMC_HDLC) += fsl_qmc_hdlc.o obj-$(CONFIG_FSL_UCC_HDLC) += fsl_ucc_hdlc.o obj-$(CONFIG_SLIC_DS26522) += slic_ds26522.o

diff --git a/drivers/net/wan/fsl_qmc_hdlc.c b/drivers/net/wan/fsl_qmc_hdlc.c new file mode 100644 index 000000000000..15e102547ff2 --- /dev/null +++ b/drivers/net/wan/fsl_qmc_hdlc.c @@ -0,0 +1,422 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Freescale QMC HDLC Device Driver + * + * Copyright 2023 CS GROUP France + * + * Author: Herve Codina herve.codina@bootlin.com + */ + +#include <linux/dma-mapping.h> +#include <linux/hdlc.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <soc/fsl/qe/qmc.h> + +struct qmc_hdlc_desc { + struct net_device *netdev; + struct sk_buff *skb; /* NULL if the descriptor is not in use */ + dma_addr_t dma_addr; + size_t dma_size; +}; + +struct qmc_hdlc { + struct device *dev; + struct qmc_chan *qmc_chan; + struct net_device *netdev; + bool is_crc32; + spinlock_t tx_lock; /* Protect tx descriptors */ + struct qmc_hdlc_desc tx_descs[8]; + unsigned int tx_out; + struct qmc_hdlc_desc rx_descs[4]; +}; + +static inline struct qmc_hdlc *netdev_to_qmc_hdlc(struct net_device *netdev) +{ + return dev_to_hdlc(netdev)->priv; +} + +static int qmc_hdlc_recv_queue(struct qmc_hdlc *qmc_hdlc, struct qmc_hdlc_desc *desc, size_t size); + +#define QMC_HDLC_RX_ERROR_FLAGS (QMC_RX_FLAG_HDLC_OVF | \ + QMC_RX_FLAG_HDLC_UNA | \ + QMC_RX_FLAG_HDLC_ABORT | \ + QMC_RX_FLAG_HDLC_CRC) + +static void qmc_hcld_recv_complete(void *context, size_t length, unsigned int flags) +{ + struct qmc_hdlc_desc *desc = context; + struct net_device *netdev = desc->netdev; + struct qmc_hdlc *qmc_hdlc = netdev_to_qmc_hdlc(desc->netdev); + int ret; + + dma_unmap_single(qmc_hdlc->dev, desc->dma_addr, desc->dma_size, DMA_FROM_DEVICE); + + if (flags & QMC_HDLC_RX_ERROR_FLAGS) { + netdev->stats.rx_errors++; + if (flags & QMC_RX_FLAG_HDLC_OVF) /* Data overflow */ + netdev->stats.rx_over_errors++; + if (flags & QMC_RX_FLAG_HDLC_UNA) /* bits received not multiple of 8 */ + netdev->stats.rx_frame_errors++; + if (flags & QMC_RX_FLAG_HDLC_ABORT) /* Received an abort sequence */ + netdev->stats.rx_frame_errors++; + if (flags & QMC_RX_FLAG_HDLC_CRC) /* CRC error */ + netdev->stats.rx_crc_errors++; + kfree_skb(desc->skb); + } else { + netdev->stats.rx_packets++; + netdev->stats.rx_bytes += length; + + skb_put(desc->skb, length); + desc->skb->protocol = hdlc_type_trans(desc->skb, netdev); + netif_rx(desc->skb); + } + + /* Re-queue a transfer using the same descriptor */ + ret = qmc_hdlc_recv_queue(qmc_hdlc, desc, desc->dma_size); + if (ret) { + dev_err(qmc_hdlc->dev, "queue recv desc failed (%d)\n", ret); + netdev->stats.rx_errors++; + } +} + +static int qmc_hdlc_recv_queue(struct qmc_hdlc *qmc_hdlc, struct qmc_hdlc_desc *desc, size_t size) +{ + int ret; + + desc->skb = dev_alloc_skb(size); + if (!desc->skb) + return -ENOMEM; + + desc->dma_size = size; + desc->dma_addr = dma_map_single(qmc_hdlc->dev, desc->skb->data, + desc->dma_size, DMA_FROM_DEVICE); + ret = dma_mapping_error(qmc_hdlc->dev, desc->dma_addr); + if (ret) + goto free_skb; + + ret = qmc_chan_read_submit(qmc_hdlc->qmc_chan, desc->dma_addr, desc->dma_size, + qmc_hcld_recv_complete, desc); + if (ret) + goto dma_unmap; + + return 0; + +dma_unmap: + dma_unmap_single(qmc_hdlc->dev, desc->dma_addr, desc->dma_size, DMA_FROM_DEVICE); +free_skb: + kfree_skb(desc->skb); + desc->skb = NULL; + return ret; +} + +static void qmc_hdlc_xmit_complete(void *context) +{ + struct qmc_hdlc_desc *desc = context; + struct net_device *netdev = desc->netdev; + struct qmc_hdlc *qmc_hdlc = netdev_to_qmc_hdlc(netdev); + struct sk_buff *skb; + unsigned long flags; + + spin_lock_irqsave(&qmc_hdlc->tx_lock, flags); + dma_unmap_single(qmc_hdlc->dev, desc->dma_addr, desc->dma_size, DMA_TO_DEVICE); + skb = desc->skb; + desc->skb = NULL; /* Release the descriptor */ + if (netif_queue_stopped(netdev)) + netif_wake_queue(netdev); + spin_unlock_irqrestore(&qmc_hdlc->tx_lock, flags); + + netdev->stats.tx_packets++; + netdev->stats.tx_bytes += skb->len; + + dev_consume_skb_any(skb); +} + +static int qmc_hdlc_xmit_queue(struct qmc_hdlc *qmc_hdlc, struct qmc_hdlc_desc *desc) +{ + int ret; + + desc->dma_addr = dma_map_single(qmc_hdlc->dev, desc->skb->data, + desc->dma_size, DMA_TO_DEVICE); + ret = dma_mapping_error(qmc_hdlc->dev, desc->dma_addr); + if (ret) { + dev_err(qmc_hdlc->dev, "failed to map skb\n"); + return ret; + } + + ret = qmc_chan_write_submit(qmc_hdlc->qmc_chan, desc->dma_addr, desc->dma_size, + qmc_hdlc_xmit_complete, desc); + if (ret) { + dev_err(qmc_hdlc->dev, "qmc chan write returns %d\n", ret); + dma_unmap_single(qmc_hdlc->dev, desc->dma_addr, desc->dma_size, DMA_TO_DEVICE); + return ret; + } + + return 0; +} + +static netdev_tx_t qmc_hdlc_xmit(struct sk_buff *skb, struct net_device *netdev) +{ + struct qmc_hdlc *qmc_hdlc = netdev_to_qmc_hdlc(netdev); + struct qmc_hdlc_desc *desc; + unsigned long flags; + int ret; + + spin_lock_irqsave(&qmc_hdlc->tx_lock, flags); + desc = &qmc_hdlc->tx_descs[qmc_hdlc->tx_out]; + if (desc->skb) { + /* Should never happen. + * Previous xmit should have already stopped the queue. + */ + netif_stop_queue(netdev); + spin_unlock_irqrestore(&qmc_hdlc->tx_lock, flags); + return NETDEV_TX_BUSY; + } + spin_unlock_irqrestore(&qmc_hdlc->tx_lock, flags); + + desc->netdev = netdev; + desc->dma_size = skb->len; + desc->skb = skb; + ret = qmc_hdlc_xmit_queue(qmc_hdlc, desc); + if (ret) { + desc->skb = NULL; /* Release the descriptor */ + if (ret == -EBUSY) { + netif_stop_queue(netdev); + return NETDEV_TX_BUSY; + } + dev_kfree_skb(skb); + netdev->stats.tx_dropped++; + return NETDEV_TX_OK; + } + + qmc_hdlc->tx_out = (qmc_hdlc->tx_out + 1) % ARRAY_SIZE(qmc_hdlc->tx_descs); + + spin_lock_irqsave(&qmc_hdlc->tx_lock, flags); + if (qmc_hdlc->tx_descs[qmc_hdlc->tx_out].skb) + netif_stop_queue(netdev); + spin_unlock_irqrestore(&qmc_hdlc->tx_lock, flags); + + return NETDEV_TX_OK; +} + +static int qmc_hdlc_open(struct net_device *netdev) +{ + struct qmc_hdlc *qmc_hdlc = netdev_to_qmc_hdlc(netdev); + struct qmc_chan_param chan_param; + struct qmc_hdlc_desc *desc; + int ret; + int i; + + ret = hdlc_open(netdev); + if (ret) + return ret; + + chan_param.mode = QMC_HDLC; + /* HDLC_MAX_MRU + 4 for the CRC + * HDLC_MAX_MRU + 4 + 8 for the CRC and some extraspace needed by the QMC + */ + chan_param.hdlc.max_rx_buf_size = HDLC_MAX_MRU + 4 + 8; + chan_param.hdlc.max_rx_frame_size = HDLC_MAX_MRU + 4; + chan_param.hdlc.is_crc32 = qmc_hdlc->is_crc32; + ret = qmc_chan_set_param(qmc_hdlc->qmc_chan, &chan_param); + if (ret) { + dev_err(qmc_hdlc->dev, "failed to set param (%d)\n", ret); + goto hdlc_close; + } + + /* Queue as many recv descriptors as possible */ + for (i = 0; i < ARRAY_SIZE(qmc_hdlc->rx_descs); i++) { + desc = &qmc_hdlc->rx_descs[i]; + + desc->netdev = netdev; + ret = qmc_hdlc_recv_queue(qmc_hdlc, desc, chan_param.hdlc.max_rx_buf_size); + if (ret) { + if (ret == -EBUSY && i != 0) + break; /* We use all the QMC chan capability */ + goto free_desc; + } + } + + ret = qmc_chan_start(qmc_hdlc->qmc_chan, QMC_CHAN_ALL); + if (ret) { + dev_err(qmc_hdlc->dev, "qmc chan start failed (%d)\n", ret); + goto free_desc; + } + + netif_start_queue(netdev); + + return 0; + +free_desc: + qmc_chan_reset(qmc_hdlc->qmc_chan, QMC_CHAN_ALL); + for (i = 0; i < ARRAY_SIZE(qmc_hdlc->rx_descs); i++) { + desc = &qmc_hdlc->rx_descs[i]; + if (!desc->skb) + continue; + dma_unmap_single(qmc_hdlc->dev, desc->dma_addr, desc->dma_size, + DMA_FROM_DEVICE); + kfree_skb(desc->skb); + desc->skb = NULL; + } +hdlc_close: + hdlc_close(netdev); + return ret; +} + +static int qmc_hdlc_close(struct net_device *netdev) +{ + struct qmc_hdlc *qmc_hdlc = netdev_to_qmc_hdlc(netdev); + struct qmc_hdlc_desc *desc; + int i; + + netif_stop_queue(netdev); + + qmc_chan_stop(qmc_hdlc->qmc_chan, QMC_CHAN_ALL); + qmc_chan_reset(qmc_hdlc->qmc_chan, QMC_CHAN_ALL); + + for (i = 0; i < ARRAY_SIZE(qmc_hdlc->tx_descs); i++) { + desc = &qmc_hdlc->tx_descs[i]; + if (!desc->skb) + continue; + dma_unmap_single(qmc_hdlc->dev, desc->dma_addr, desc->dma_size, + DMA_TO_DEVICE); + kfree_skb(desc->skb); + desc->skb = NULL; + } + + for (i = 0; i < ARRAY_SIZE(qmc_hdlc->rx_descs); i++) { + desc = &qmc_hdlc->rx_descs[i]; + if (!desc->skb) + continue; + dma_unmap_single(qmc_hdlc->dev, desc->dma_addr, desc->dma_size, + DMA_FROM_DEVICE); + kfree_skb(desc->skb); + desc->skb = NULL; + } + + hdlc_close(netdev); + return 0; +} + +static int qmc_hdlc_attach(struct net_device *netdev, unsigned short encoding, + unsigned short parity) +{ + struct qmc_hdlc *qmc_hdlc = netdev_to_qmc_hdlc(netdev); + + if (encoding != ENCODING_NRZ) + return -EINVAL; + + switch (parity) { + case PARITY_CRC16_PR1_CCITT: + qmc_hdlc->is_crc32 = false; + break; + case PARITY_CRC32_PR1_CCITT: + qmc_hdlc->is_crc32 = true; + break; + default: + dev_err(qmc_hdlc->dev, "unsupported parity %u\n", parity); + return -EINVAL; + } + + return 0; +} + +static const struct net_device_ops qmc_hdlc_netdev_ops = { + .ndo_open = qmc_hdlc_open, + .ndo_stop = qmc_hdlc_close, + .ndo_start_xmit = hdlc_start_xmit, + .ndo_siocwandev = hdlc_ioctl, +}; + +static int qmc_hdlc_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct qmc_hdlc *qmc_hdlc; + struct qmc_chan_info info; + hdlc_device *hdlc; + int ret; + + qmc_hdlc = devm_kzalloc(&pdev->dev, sizeof(*qmc_hdlc), GFP_KERNEL); + if (!qmc_hdlc) + return -ENOMEM; + + qmc_hdlc->dev = &pdev->dev; + spin_lock_init(&qmc_hdlc->tx_lock); + + qmc_hdlc->qmc_chan = devm_qmc_chan_get_bychild(qmc_hdlc->dev, np); + if (IS_ERR(qmc_hdlc->qmc_chan)) { + ret = PTR_ERR(qmc_hdlc->qmc_chan); + return dev_err_probe(qmc_hdlc->dev, ret, "get QMC channel failed\n"); + } + + ret = qmc_chan_get_info(qmc_hdlc->qmc_chan, &info); + if (ret) { + dev_err(qmc_hdlc->dev, "get QMC channel info failed %d\n", ret); + return ret; + } + + if (info.mode != QMC_HDLC) { + dev_err(qmc_hdlc->dev, "QMC chan mode %d is not QMC_HDLC\n", + info.mode); + return -EINVAL; + } + + qmc_hdlc->netdev = alloc_hdlcdev(qmc_hdlc); + if (!qmc_hdlc->netdev) { + dev_err(qmc_hdlc->dev, "failed to alloc hdlc dev\n"); + return -ENOMEM; + } + + hdlc = dev_to_hdlc(qmc_hdlc->netdev); + hdlc->attach = qmc_hdlc_attach; + hdlc->xmit = qmc_hdlc_xmit; + SET_NETDEV_DEV(qmc_hdlc->netdev, qmc_hdlc->dev); + qmc_hdlc->netdev->tx_queue_len = ARRAY_SIZE(qmc_hdlc->tx_descs); + qmc_hdlc->netdev->netdev_ops = &qmc_hdlc_netdev_ops; + ret = register_hdlc_device(qmc_hdlc->netdev); + if (ret) { + dev_err(qmc_hdlc->dev, "failed to register hdlc device (%d)\n", ret); + goto free_netdev; + } + + platform_set_drvdata(pdev, qmc_hdlc); + + return 0; + +free_netdev: + free_netdev(qmc_hdlc->netdev); + return ret; +} + +static int qmc_hdlc_remove(struct platform_device *pdev) +{ + struct qmc_hdlc *qmc_hdlc = platform_get_drvdata(pdev); + + unregister_hdlc_device(qmc_hdlc->netdev); + free_netdev(qmc_hdlc->netdev); + + return 0; +} + +static const struct of_device_id qmc_hdlc_id_table[] = { + { .compatible = "fsl,qmc-hdlc" }, + {} /* sentinel */ +}; +MODULE_DEVICE_TABLE(of, qmc_hdlc_driver); + +static struct platform_driver qmc_hdlc_driver = { + .driver = { + .name = "fsl-qmc-hdlc", + .of_match_table = qmc_hdlc_id_table, + }, + .probe = qmc_hdlc_probe, + .remove = qmc_hdlc_remove, +}; +module_platform_driver(qmc_hdlc_driver); + +MODULE_AUTHOR("Herve Codina herve.codina@bootlin.com"); +MODULE_DESCRIPTION("QMC HDLC driver"); +MODULE_LICENSE("GPL");

Available timeslots masks define timeslots available for the related channel. These timeslots are defined by the QMC binding.

Timeslots used are initialized to available timeslots but can be a subset of available timeslots. This prepares the dynamic timeslots management (ie. changing timeslots at runtime).

Signed-off-by: Herve Codina herve.codina@bootlin.com Reviewed-by: Christophe Leroy christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu --- drivers/soc/fsl/qe/qmc.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/fsl/qe/qmc.c b/drivers/soc/fsl/qe/qmc.c index 5da15a25600e..653d458b84b6 100644 --- a/drivers/soc/fsl/qe/qmc.c +++ b/drivers/soc/fsl/qe/qmc.c @@ -177,7 +177,9 @@ struct qmc_chan { struct qmc *qmc; void __iomem *s_param; enum qmc_mode mode; + u64 tx_ts_mask_avail; u64 tx_ts_mask; + u64 rx_ts_mask_avail; u64 rx_ts_mask; bool is_reverse_data;

@@ -875,7 +877,8 @@ static int qmc_of_parse_chans(struct qmc *qmc, struct device_node *np) of_node_put(chan_np); return ret; } - chan->tx_ts_mask = ts_mask; + chan->tx_ts_mask_avail = ts_mask; + chan->tx_ts_mask = chan->tx_ts_mask_avail;

ret = of_property_read_u64(chan_np, "fsl,rx-ts-mask", &ts_mask); if (ret) { @@ -884,7 +887,8 @@ static int qmc_of_parse_chans(struct qmc *qmc, struct device_node *np) of_node_put(chan_np); return ret; } - chan->rx_ts_mask = ts_mask; + chan->rx_ts_mask_avail = ts_mask; + chan->rx_ts_mask = chan->rx_ts_mask_avail;

mode = "transparent"; ret = of_property_read_string(chan_np, "fsl,operational-mode", &mode);

Introduce the qmc_chan_setup_tsa* functions to setup entries related to the given channel. Use them during QMC channels setup.

Signed-off-by: Herve Codina herve.codina@bootlin.com Reviewed-by: Christophe Leroy christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu --- drivers/soc/fsl/qe/qmc.c | 161 ++++++++++++++++++++++++++++++--------- 1 file changed, 125 insertions(+), 36 deletions(-)

diff --git a/drivers/soc/fsl/qe/qmc.c b/drivers/soc/fsl/qe/qmc.c index 28acf4c8a141..8e8bd1942c08 100644 --- a/drivers/soc/fsl/qe/qmc.c +++ b/drivers/soc/fsl/qe/qmc.c @@ -240,6 +240,11 @@ static void qmc_clrbits16(void __iomem *addr, u16 clr) qmc_write16(addr, qmc_read16(addr) & ~clr); }

+static void qmc_clrsetbits16(void __iomem *addr, u16 clr, u16 set) +{ + qmc_write16(addr, (qmc_read16(addr) & ~clr) | set); +} + static void qmc_write32(void __iomem *addr, u32 val) { iowrite32be(val, addr); @@ -562,6 +567,122 @@ static void qmc_chan_read_done(struct qmc_chan *chan) spin_unlock_irqrestore(&chan->rx_lock, flags); }

+static int qmc_chan_setup_tsa_64rxtx(struct qmc_chan *chan, const struct tsa_serial_info *info) +{ + unsigned int i; + u16 curr; + u16 val; + + /* + * Use a common Tx/Rx 64 entries table. + * Tx and Rx related stuffs must be identical + */ + if (chan->tx_ts_mask != chan->rx_ts_mask) { + dev_err(chan->qmc->dev, "chan %u uses different Rx and Tx TS\n", chan->id); + return -EINVAL; + } + + val = QMC_TSA_VALID | QMC_TSA_MASK | QMC_TSA_CHANNEL(chan->id); + + /* Check entries based on Rx stuff*/ + for (i = 0; i < info->nb_rx_ts; i++) { + if (!(chan->rx_ts_mask & (((u64)1) << i))) + continue; + + curr = qmc_read16(chan->qmc->scc_pram + QMC_GBL_TSATRX + (i * 2)); + if (curr & QMC_TSA_VALID && (curr & ~QMC_TSA_WRAP) != val) { + dev_err(chan->qmc->dev, "chan %u TxRx entry %d already used\n", + chan->id, i); + return -EBUSY; + } + } + + /* Set entries based on Rx stuff*/ + for (i = 0; i < info->nb_rx_ts; i++) { + if (!(chan->rx_ts_mask & (((u64)1) << i))) + continue; + + qmc_clrsetbits16(chan->qmc->scc_pram + QMC_GBL_TSATRX + (i * 2), + ~QMC_TSA_WRAP, val); + } + + return 0; +} + +static int qmc_chan_setup_tsa_32rx_32tx(struct qmc_chan *chan, const struct tsa_serial_info *info) +{ + unsigned int i; + u16 curr; + u16 val; + + /* Use a Tx 32 entries table and a Rx 32 entries table */ + + val = QMC_TSA_VALID | QMC_TSA_MASK | QMC_TSA_CHANNEL(chan->id); + + /* Check entries based on Rx stuff */ + for (i = 0; i < info->nb_rx_ts; i++) { + if (!(chan->rx_ts_mask & (((u64)1) << i))) + continue; + + curr = qmc_read16(chan->qmc->scc_pram + QMC_GBL_TSATRX + (i * 2)); + if (curr & QMC_TSA_VALID && (curr & ~QMC_TSA_WRAP) != val) { + dev_err(chan->qmc->dev, "chan %u Rx entry %d already used\n", + chan->id, i); + return -EBUSY; + } + } + /* Check entries based on Tx stuff */ + for (i = 0; i < info->nb_tx_ts; i++) { + if (!(chan->tx_ts_mask & (((u64)1) << i))) + continue; + + curr = qmc_read16(chan->qmc->scc_pram + QMC_GBL_TSATTX + (i * 2)); + if (curr & QMC_TSA_VALID && (curr & ~QMC_TSA_WRAP) != val) { + dev_err(chan->qmc->dev, "chan %u Tx entry %d already used\n", + chan->id, i); + return -EBUSY; + } + } + + /* Set entries based on Rx stuff */ + for (i = 0; i < info->nb_rx_ts; i++) { + if (!(chan->rx_ts_mask & (((u64)1) << i))) + continue; + + qmc_clrsetbits16(chan->qmc->scc_pram + QMC_GBL_TSATRX + (i * 2), + ~QMC_TSA_WRAP, val); + } + /* Set entries based on Tx stuff */ + for (i = 0; i < info->nb_tx_ts; i++) { + if (!(chan->tx_ts_mask & (((u64)1) << i))) + continue; + + qmc_clrsetbits16(chan->qmc->scc_pram + QMC_GBL_TSATTX + (i * 2), + ~QMC_TSA_WRAP, val); + } + + return 0; +} + +static int qmc_chan_setup_tsa(struct qmc_chan *chan) +{ + struct tsa_serial_info info; + int ret; + + /* Retrieve info from the TSA related serial */ + ret = tsa_serial_get_info(chan->qmc->tsa_serial, &info); + if (ret) + return ret; + + /* + * Setup one common 64 entries table or two 32 entries (one for Tx + * and one for Tx) according to assigned TS numbers. + */ + return ((info.nb_tx_ts > 32) || (info.nb_rx_ts > 32)) ? + qmc_chan_setup_tsa_64rxtx(chan, &info) : + qmc_chan_setup_tsa_32rx_32tx(chan, &info); +} + static int qmc_chan_command(struct qmc_chan *chan, u8 qmc_opcode) { return cpm_command(chan->id << 2, (qmc_opcode << 4) | 0x0E); @@ -921,7 +1042,6 @@ static int qmc_of_parse_chans(struct qmc *qmc, struct device_node *np)

static int qmc_init_tsa_64rxtx(struct qmc *qmc, const struct tsa_serial_info *info) { - struct qmc_chan *chan; unsigned int i; u16 val;

@@ -935,18 +1055,6 @@ static int qmc_init_tsa_64rxtx(struct qmc *qmc, const struct tsa_serial_info *in for (i = 0; i < 64; i++) qmc_write16(qmc->scc_pram + QMC_GBL_TSATRX + (i * 2), 0x0000);

- /* Set entries based on Rx stuff*/ - list_for_each_entry(chan, &qmc->chan_head, list) { - for (i = 0; i < info->nb_rx_ts; i++) { - if (!(chan->rx_ts_mask & (((u64)1) << i))) - continue; - - val = QMC_TSA_VALID | QMC_TSA_MASK | - QMC_TSA_CHANNEL(chan->id); - qmc_write16(qmc->scc_pram + QMC_GBL_TSATRX + (i * 2), val); - } - } - /* Set Wrap bit on last entry */ qmc_setbits16(qmc->scc_pram + QMC_GBL_TSATRX + ((info->nb_rx_ts - 1) * 2), QMC_TSA_WRAP); @@ -963,7 +1071,6 @@ static int qmc_init_tsa_64rxtx(struct qmc *qmc, const struct tsa_serial_info *in

static int qmc_init_tsa_32rx_32tx(struct qmc *qmc, const struct tsa_serial_info *info) { - struct qmc_chan *chan; unsigned int i; u16 val;

@@ -978,28 +1085,6 @@ static int qmc_init_tsa_32rx_32tx(struct qmc *qmc, const struct tsa_serial_info qmc_write16(qmc->scc_pram + QMC_GBL_TSATTX + (i * 2), 0x0000); }

- /* Set entries based on Rx and Tx stuff*/ - list_for_each_entry(chan, &qmc->chan_head, list) { - /* Rx part */ - for (i = 0; i < info->nb_rx_ts; i++) { - if (!(chan->rx_ts_mask & (((u64)1) << i))) - continue; - - val = QMC_TSA_VALID | QMC_TSA_MASK | - QMC_TSA_CHANNEL(chan->id); - qmc_write16(qmc->scc_pram + QMC_GBL_TSATRX + (i * 2), val); - } - /* Tx part */ - for (i = 0; i < info->nb_tx_ts; i++) { - if (!(chan->tx_ts_mask & (((u64)1) << i))) - continue; - - val = QMC_TSA_VALID | QMC_TSA_MASK | - QMC_TSA_CHANNEL(chan->id); - qmc_write16(qmc->scc_pram + QMC_GBL_TSATTX + (i * 2), val); - } - } - /* Set Wrap bit on last entries */ qmc_setbits16(qmc->scc_pram + QMC_GBL_TSATRX + ((info->nb_rx_ts - 1) * 2), QMC_TSA_WRAP); @@ -1081,6 +1166,10 @@ static int qmc_setup_chan(struct qmc *qmc, struct qmc_chan *chan)

chan->qmc = qmc;

+ ret = qmc_chan_setup_tsa(chan); + if (ret) + return ret; + /* Set channel specific parameter base address */ chan->s_param = qmc->dpram + (chan->id * 64); /* 16 bd per channel (8 rx and 8 tx) */

The timeslots checked in qmc_check_chans() are the timeslots used. With the introduction of the available timeslots, the used timeslots are a subset of the available timeslots. The timeslots checked during the qmc_check_chans() call should be the available ones.

Simply update and check the available timeslots instead of the used timeslots in qmc_check_chans().

Signed-off-by: Herve Codina herve.codina@bootlin.com Reviewed-by: Christophe Leroy christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu --- drivers/soc/fsl/qe/qmc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/soc/fsl/qe/qmc.c b/drivers/soc/fsl/qe/qmc.c index 1189e6076e37..269d10cd3c7a 100644 --- a/drivers/soc/fsl/qe/qmc.c +++ b/drivers/soc/fsl/qe/qmc.c @@ -914,13 +914,13 @@ static int qmc_check_chans(struct qmc *qmc) rx_ts_assigned_mask = info.nb_rx_ts == 64 ? U64_MAX : (((u64)1) << info.nb_rx_ts) - 1;

list_for_each_entry(chan, &qmc->chan_head, list) { - if (chan->tx_ts_mask > tx_ts_assigned_mask) { - dev_err(qmc->dev, "chan %u uses TSA unassigned Tx TS\n", chan->id); + if (chan->tx_ts_mask_avail > tx_ts_assigned_mask) { + dev_err(qmc->dev, "chan %u can use TSA unassigned Tx TS\n", chan->id); return -EINVAL; }

- if (chan->rx_ts_mask > rx_ts_assigned_mask) { - dev_err(qmc->dev, "chan %u uses TSA unassigned Rx TS\n", chan->id); + if (chan->rx_ts_mask_avail > rx_ts_assigned_mask) { + dev_err(qmc->dev, "chan %u can use TSA unassigned Rx TS\n", chan->id); return -EINVAL; } }

The Tx and Rx entries for a given channel are set in one function.

In order to modify Rx entries and Tx entries independently of one other, split this function in one for the Rx part and one for the Tx part.

Signed-off-by: Herve Codina herve.codina@bootlin.com Reviewed-by: Christophe Leroy christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu --- drivers/soc/fsl/qe/qmc.c | 49 ++++++++++++++++++++++++++++------------ 1 file changed, 35 insertions(+), 14 deletions(-)

diff --git a/drivers/soc/fsl/qe/qmc.c b/drivers/soc/fsl/qe/qmc.c index 26cd7e1ccafc..eeceb81bf107 100644 --- a/drivers/soc/fsl/qe/qmc.c +++ b/drivers/soc/fsl/qe/qmc.c @@ -610,14 +610,14 @@ static int qmc_chan_setup_tsa_64rxtx(struct qmc_chan *chan, const struct tsa_ser return 0; }

-static int qmc_chan_setup_tsa_32rx_32tx(struct qmc_chan *chan, const struct tsa_serial_info *info, - bool enable) +static int qmc_chan_setup_tsa_32rx(struct qmc_chan *chan, const struct tsa_serial_info *info, + bool enable) { unsigned int i; u16 curr; u16 val;

- /* Use a Tx 32 entries table and a Rx 32 entries table */ + /* Use a Rx 32 entries table */

val = QMC_TSA_VALID | QMC_TSA_MASK | QMC_TSA_CHANNEL(chan->id);

@@ -633,6 +633,30 @@ static int qmc_chan_setup_tsa_32rx_32tx(struct qmc_chan *chan, const struct tsa_ return -EBUSY; } } + + /* Set entries based on Rx stuff */ + for (i = 0; i < info->nb_rx_ts; i++) { + if (!(chan->rx_ts_mask & (((u64)1) << i))) + continue; + + qmc_clrsetbits16(chan->qmc->scc_pram + QMC_GBL_TSATRX + (i * 2), + ~QMC_TSA_WRAP, enable ? val : 0x0000); + } + + return 0; +} + +static int qmc_chan_setup_tsa_32tx(struct qmc_chan *chan, const struct tsa_serial_info *info, + bool enable) +{ + unsigned int i; + u16 curr; + u16 val; + + /* Use a Tx 32 entries table */ + + val = QMC_TSA_VALID | QMC_TSA_MASK | QMC_TSA_CHANNEL(chan->id); + /* Check entries based on Tx stuff */ for (i = 0; i < info->nb_tx_ts; i++) { if (!(chan->tx_ts_mask & (((u64)1) << i))) @@ -646,14 +670,6 @@ static int qmc_chan_setup_tsa_32rx_32tx(struct qmc_chan *chan, const struct tsa_ } }

- /* Set entries based on Rx stuff */ - for (i = 0; i < info->nb_rx_ts; i++) { - if (!(chan->rx_ts_mask & (((u64)1) << i))) - continue; - - qmc_clrsetbits16(chan->qmc->scc_pram + QMC_GBL_TSATRX + (i * 2), - ~QMC_TSA_WRAP, enable ? val : 0x0000); - } /* Set entries based on Tx stuff */ for (i = 0; i < info->nb_tx_ts; i++) { if (!(chan->tx_ts_mask & (((u64)1) << i))) @@ -680,9 +696,14 @@ static int qmc_chan_setup_tsa(struct qmc_chan *chan, bool enable) * Setup one common 64 entries table or two 32 entries (one for Tx * and one for Tx) according to assigned TS numbers. */ - return ((info.nb_tx_ts > 32) || (info.nb_rx_ts > 32)) ? - qmc_chan_setup_tsa_64rxtx(chan, &info, enable) : - qmc_chan_setup_tsa_32rx_32tx(chan, &info, enable); + if (info.nb_tx_ts > 32 || info.nb_rx_ts > 32) + return qmc_chan_setup_tsa_64rxtx(chan, &info, enable); + + ret = qmc_chan_setup_tsa_32rx(chan, &info, enable); + if (ret) + return ret; + + return qmc_chan_setup_tsa_32tx(chan, &info, enable); }

static int qmc_chan_command(struct qmc_chan *chan, u8 qmc_opcode)

In order to support runtime timeslot route changes, enable the channel timeslot entries at channel start() and disable them at channel stop().

Signed-off-by: Herve Codina herve.codina@bootlin.com Reviewed-by: Christophe Leroy christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu --- drivers/soc/fsl/qe/qmc.c | 175 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 163 insertions(+), 12 deletions(-)

diff --git a/drivers/soc/fsl/qe/qmc.c b/drivers/soc/fsl/qe/qmc.c index 19acfcded9bc..185e6e87a83f 100644 --- a/drivers/soc/fsl/qe/qmc.c +++ b/drivers/soc/fsl/qe/qmc.c @@ -177,6 +177,7 @@ struct qmc_chan { struct qmc *qmc; void __iomem *s_param; enum qmc_mode mode; + spinlock_t ts_lock; /* Protect timeslots */ u64 tx_ts_mask_avail; u64 tx_ts_mask; u64 rx_ts_mask_avail; @@ -265,6 +266,7 @@ static void qmc_setbits32(void __iomem *addr, u32 set) int qmc_chan_get_info(struct qmc_chan *chan, struct qmc_chan_info *info) { struct tsa_serial_info tsa_info; + unsigned long flags; int ret;

/* Retrieve info from the TSA related serial */ @@ -272,6 +274,8 @@ int qmc_chan_get_info(struct qmc_chan *chan, struct qmc_chan_info *info) if (ret) return ret;

+ spin_lock_irqsave(&chan->ts_lock, flags); + info->mode = chan->mode; info->rx_fs_rate = tsa_info.rx_fs_rate; info->rx_bit_rate = tsa_info.rx_bit_rate; @@ -280,6 +284,8 @@ int qmc_chan_get_info(struct qmc_chan *chan, struct qmc_chan_info *info) info->tx_bit_rate = tsa_info.tx_bit_rate; info->nb_rx_ts = hweight64(chan->rx_ts_mask);

+ spin_unlock_irqrestore(&chan->ts_lock, flags); + return 0; } EXPORT_SYMBOL(qmc_chan_get_info); @@ -683,6 +689,40 @@ static int qmc_chan_setup_tsa_32tx(struct qmc_chan *chan, const struct tsa_seria return 0; }

+static int qmc_chan_setup_tsa_tx(struct qmc_chan *chan, bool enable) +{ + struct tsa_serial_info info; + int ret; + + /* Retrieve info from the TSA related serial */ + ret = tsa_serial_get_info(chan->qmc->tsa_serial, &info); + if (ret) + return ret; + + /* Setup entries */ + if (chan->qmc->is_tsa_64rxtx) + return qmc_chan_setup_tsa_64rxtx(chan, &info, enable); + + return qmc_chan_setup_tsa_32tx(chan, &info, enable); +} + +static int qmc_chan_setup_tsa_rx(struct qmc_chan *chan, bool enable) +{ + struct tsa_serial_info info; + int ret; + + /* Retrieve info from the TSA related serial */ + ret = tsa_serial_get_info(chan->qmc->tsa_serial, &info); + if (ret) + return ret; + + /* Setup entries */ + if (chan->qmc->is_tsa_64rxtx) + return qmc_chan_setup_tsa_64rxtx(chan, &info, enable); + + return qmc_chan_setup_tsa_32rx(chan, &info, enable); +} + static int qmc_chan_setup_tsa(struct qmc_chan *chan, bool enable) { struct tsa_serial_info info; @@ -719,6 +759,12 @@ static int qmc_chan_stop_rx(struct qmc_chan *chan)

spin_lock_irqsave(&chan->rx_lock, flags);

+ if (chan->is_rx_stopped) { + /* The channel is already stopped -> simply return ok */ + ret = 0; + goto end; + } + /* Send STOP RECEIVE command */ ret = qmc_chan_command(chan, 0x0); if (ret) { @@ -729,6 +775,15 @@ static int qmc_chan_stop_rx(struct qmc_chan *chan)

chan->is_rx_stopped = true;

+ if (!chan->qmc->is_tsa_64rxtx || chan->is_tx_stopped) { + ret = qmc_chan_setup_tsa_rx(chan, false); + if (ret) { + dev_err(chan->qmc->dev, "chan %u: Disable tsa entries failed (%d)\n", + chan->id, ret); + goto end; + } + } + end: spin_unlock_irqrestore(&chan->rx_lock, flags); return ret; @@ -741,6 +796,12 @@ static int qmc_chan_stop_tx(struct qmc_chan *chan)

spin_lock_irqsave(&chan->tx_lock, flags);

+ if (chan->is_tx_stopped) { + /* The channel is already stopped -> simply return ok */ + ret = 0; + goto end; + } + /* Send STOP TRANSMIT command */ ret = qmc_chan_command(chan, 0x1); if (ret) { @@ -751,37 +812,82 @@ static int qmc_chan_stop_tx(struct qmc_chan *chan)

chan->is_tx_stopped = true;

+ if (!chan->qmc->is_tsa_64rxtx || chan->is_rx_stopped) { + ret = qmc_chan_setup_tsa_tx(chan, false); + if (ret) { + dev_err(chan->qmc->dev, "chan %u: Disable tsa entries failed (%d)\n", + chan->id, ret); + goto end; + } + } + end: spin_unlock_irqrestore(&chan->tx_lock, flags); return ret; }

+static int qmc_chan_start_rx(struct qmc_chan *chan); + int qmc_chan_stop(struct qmc_chan *chan, int direction) { - int ret; + bool is_rx_rollback_needed = false; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&chan->ts_lock, flags);

if (direction & QMC_CHAN_READ) { + is_rx_rollback_needed = !chan->is_rx_stopped; ret = qmc_chan_stop_rx(chan); if (ret) - return ret; + goto end; }

if (direction & QMC_CHAN_WRITE) { ret = qmc_chan_stop_tx(chan); - if (ret) - return ret; + if (ret) { + /* Restart rx if needed */ + if (is_rx_rollback_needed) + qmc_chan_start_rx(chan); + goto end; + } }

- return 0; +end: + spin_unlock_irqrestore(&chan->ts_lock, flags); + return ret; } EXPORT_SYMBOL(qmc_chan_stop);

-static void qmc_chan_start_rx(struct qmc_chan *chan) +static int qmc_setup_chan_trnsync(struct qmc *qmc, struct qmc_chan *chan); + +static int qmc_chan_start_rx(struct qmc_chan *chan) { unsigned long flags; + int ret;

spin_lock_irqsave(&chan->rx_lock, flags);

+ if (!chan->is_rx_stopped) { + /* The channel is already started -> simply return ok */ + ret = 0; + goto end; + } + + ret = qmc_chan_setup_tsa_rx(chan, true); + if (ret) { + dev_err(chan->qmc->dev, "chan %u: Enable tsa entries failed (%d)\n", + chan->id, ret); + goto end; + } + + ret = qmc_setup_chan_trnsync(chan->qmc, chan); + if (ret) { + dev_err(chan->qmc->dev, "chan %u: setup TRNSYNC failed (%d)\n", + chan->id, ret); + goto end; + } + /* Restart the receiver */ if (chan->mode == QMC_TRANSPARENT) qmc_write32(chan->s_param + QMC_SPE_ZDSTATE, 0x18000080); @@ -792,15 +898,38 @@ static void qmc_chan_start_rx(struct qmc_chan *chan)

chan->is_rx_stopped = false;

+end: spin_unlock_irqrestore(&chan->rx_lock, flags); + return ret; }

-static void qmc_chan_start_tx(struct qmc_chan *chan) +static int qmc_chan_start_tx(struct qmc_chan *chan) { unsigned long flags; + int ret;

spin_lock_irqsave(&chan->tx_lock, flags);

+ if (!chan->is_tx_stopped) { + /* The channel is already started -> simply return ok */ + ret = 0; + goto end; + } + + ret = qmc_chan_setup_tsa_tx(chan, true); + if (ret) { + dev_err(chan->qmc->dev, "chan %u: Enable tsa entries failed (%d)\n", + chan->id, ret); + goto end; + } + + ret = qmc_setup_chan_trnsync(chan->qmc, chan); + if (ret) { + dev_err(chan->qmc->dev, "chan %u: setup TRNSYNC failed (%d)\n", + chan->id, ret); + goto end; + } + /* * Enable channel transmitter as it could be disabled if * qmc_chan_reset() was called. @@ -812,18 +941,39 @@ static void qmc_chan_start_tx(struct qmc_chan *chan)

chan->is_tx_stopped = false;

+end: spin_unlock_irqrestore(&chan->tx_lock, flags); + return ret; }

int qmc_chan_start(struct qmc_chan *chan, int direction) { - if (direction & QMC_CHAN_READ) - qmc_chan_start_rx(chan); + bool is_rx_rollback_needed = false; + unsigned long flags; + int ret = 0;

- if (direction & QMC_CHAN_WRITE) - qmc_chan_start_tx(chan); + spin_lock_irqsave(&chan->ts_lock, flags);

- return 0; + if (direction & QMC_CHAN_READ) { + is_rx_rollback_needed = chan->is_rx_stopped; + ret = qmc_chan_start_rx(chan); + if (ret) + goto end; + } + + if (direction & QMC_CHAN_WRITE) { + ret = qmc_chan_start_tx(chan); + if (ret) { + /* Restop rx if needed */ + if (is_rx_rollback_needed) + qmc_chan_stop_rx(chan); + goto end; + } + } + +end: + spin_unlock_irqrestore(&chan->ts_lock, flags); + return ret; } EXPORT_SYMBOL(qmc_chan_start);

@@ -992,6 +1142,7 @@ static int qmc_of_parse_chans(struct qmc *qmc, struct device_node *np) }

chan->id = chan_id; + spin_lock_init(&chan->ts_lock); spin_lock_init(&chan->rx_lock); spin_lock_init(&chan->tx_lock);

Introduce qmc_chan_{get,set}_ts_info() function to allow timeslots modification at runtime.

The modification is provided using qmc_chan_set_ts_info() and will be applied on next qmc_chan_start(). qmc_chan_set_ts_info() must be called with the channel rx and/or tx stopped.

Signed-off-by: Herve Codina herve.codina@bootlin.com Reviewed-by: Christophe Leroy christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu --- drivers/soc/fsl/qe/qmc.c | 51 ++++++++++++++++++++++++++++++++++++++++ include/soc/fsl/qe/qmc.h | 10 ++++++++ 2 files changed, 61 insertions(+)

diff --git a/drivers/soc/fsl/qe/qmc.c b/drivers/soc/fsl/qe/qmc.c index b63b54ec0a3a..6e22b96b4e7a 100644 --- a/drivers/soc/fsl/qe/qmc.c +++ b/drivers/soc/fsl/qe/qmc.c @@ -290,6 +290,57 @@ int qmc_chan_get_info(struct qmc_chan *chan, struct qmc_chan_info *info) } EXPORT_SYMBOL(qmc_chan_get_info);

+int qmc_chan_get_ts_info(struct qmc_chan *chan, struct qmc_chan_ts_info *ts_info) +{ + unsigned long flags; + + spin_lock_irqsave(&chan->ts_lock, flags); + + ts_info->rx_ts_mask_avail = chan->rx_ts_mask_avail; + ts_info->tx_ts_mask_avail = chan->tx_ts_mask_avail; + ts_info->rx_ts_mask = chan->rx_ts_mask; + ts_info->tx_ts_mask = chan->tx_ts_mask; + + spin_unlock_irqrestore(&chan->ts_lock, flags); + + return 0; +} +EXPORT_SYMBOL(qmc_chan_get_ts_info); + +int qmc_chan_set_ts_info(struct qmc_chan *chan, const struct qmc_chan_ts_info *ts_info) +{ + unsigned long flags; + int ret; + + /* Only a subset of available timeslots is allowed */ + if ((ts_info->rx_ts_mask & chan->rx_ts_mask_avail) != ts_info->rx_ts_mask) + return -EINVAL; + if ((ts_info->tx_ts_mask & chan->tx_ts_mask_avail) != ts_info->tx_ts_mask) + return -EINVAL; + + /* In case of common rx/tx table, rx/tx masks must be identical */ + if (chan->qmc->is_tsa_64rxtx) { + if (ts_info->rx_ts_mask != ts_info->tx_ts_mask) + return -EINVAL; + } + + spin_lock_irqsave(&chan->ts_lock, flags); + + if ((chan->tx_ts_mask != ts_info->tx_ts_mask && !chan->is_tx_stopped) || + (chan->rx_ts_mask != ts_info->rx_ts_mask && !chan->is_rx_stopped)) { + dev_err(chan->qmc->dev, "Channel rx and/or tx not stopped\n"); + ret = -EBUSY; + } else { + chan->tx_ts_mask = ts_info->tx_ts_mask; + chan->rx_ts_mask = ts_info->rx_ts_mask; + ret = 0; + } + spin_unlock_irqrestore(&chan->ts_lock, flags); + + return ret; +} +EXPORT_SYMBOL(qmc_chan_set_ts_info); + int qmc_chan_set_param(struct qmc_chan *chan, const struct qmc_chan_param *param) { if (param->mode != chan->mode) diff --git a/include/soc/fsl/qe/qmc.h b/include/soc/fsl/qe/qmc.h index 166484bb4294..2a333fc1ea81 100644 --- a/include/soc/fsl/qe/qmc.h +++ b/include/soc/fsl/qe/qmc.h @@ -40,6 +40,16 @@ struct qmc_chan_info {

int qmc_chan_get_info(struct qmc_chan *chan, struct qmc_chan_info *info);

+struct qmc_chan_ts_info { + u64 rx_ts_mask_avail; + u64 tx_ts_mask_avail; + u64 rx_ts_mask; + u64 tx_ts_mask; +}; + +int qmc_chan_get_ts_info(struct qmc_chan *chan, struct qmc_chan_ts_info *ts_info); +int qmc_chan_set_ts_info(struct qmc_chan *chan, const struct qmc_chan_ts_info *ts_info); + struct qmc_chan_param { enum qmc_mode mode; union {

A framer is a component in charge of an E1/T1 line interface. Connected usually to a TDM bus, it converts TDM frames to/from E1/T1 frames. It also provides information related to the E1/T1 line.

The framer framework provides a set of APIs for the framer drivers (framer provider) to create/destroy a framer and APIs for the framer users (framer consumer) to obtain a reference to the framer, and use the framer.

This basic implementation provides a framer abstraction for: - power on/off the framer - get the framer status (line state) - be notified on framer status changes - get/set the framer configuration

Signed-off-by: Herve Codina herve.codina@bootlin.com Reviewed-by: Christophe Leroy christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu --- drivers/net/wan/Kconfig | 2 + drivers/net/wan/Makefile | 2 + drivers/net/wan/framer/Kconfig | 23 + drivers/net/wan/framer/Makefile | 6 + drivers/net/wan/framer/framer-core.c | 887 +++++++++++++++++++++++++ include/linux/framer/framer-provider.h | 194 ++++++ include/linux/framer/framer.h | 205 ++++++ 7 files changed, 1319 insertions(+) create mode 100644 drivers/net/wan/framer/Kconfig create mode 100644 drivers/net/wan/framer/Makefile create mode 100644 drivers/net/wan/framer/framer-core.c create mode 100644 include/linux/framer/framer-provider.h create mode 100644 include/linux/framer/framer.h

diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index 8de99f4b647b..31ab2136cdf1 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -95,6 +95,8 @@ config HDLC_X25 comment "X.25/LAPB support is disabled" depends on HDLC && (LAPB!=m || HDLC!=m) && LAPB!=y

+source "drivers/net/wan/framer/Kconfig" + config PCI200SYN tristate "Goramo PCI200SYN support" depends on HDLC && PCI diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile index f338f4830626..00e9b7ee1e01 100644 --- a/drivers/net/wan/Makefile +++ b/drivers/net/wan/Makefile @@ -14,6 +14,8 @@ obj-$(CONFIG_HDLC_FR) += hdlc_fr.o obj-$(CONFIG_HDLC_PPP) += hdlc_ppp.o obj-$(CONFIG_HDLC_X25) += hdlc_x25.o

+obj-y += framer/ + obj-$(CONFIG_FARSYNC) += farsync.o

obj-$(CONFIG_LAPBETHER) += lapbether.o diff --git a/drivers/net/wan/framer/Kconfig b/drivers/net/wan/framer/Kconfig new file mode 100644 index 000000000000..37df9a96ab42 --- /dev/null +++ b/drivers/net/wan/framer/Kconfig @@ -0,0 +1,23 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# FRAMER +# + +menu "Framer Subsystem" + +config GENERIC_FRAMER + bool "Framer Core" + help + Generic Framer support. + A framer is a component in charge of an E1/T1 line interface. + Connected usually to a TDM bus, it converts TDM frames to/from E1/T1 + frames. It also provides information related to the E1/T1 line. + Used with HDLC, the network can be reached through the E1/T1 line. + + This framework is designed to provide a generic interface for framer + devices present in the kernel. This layer will have the generic + API by which framer drivers can create framer using the framer + framework and framer users can obtain reference to the framer. + All the users of this framework should select this config. + +endmenu diff --git a/drivers/net/wan/framer/Makefile b/drivers/net/wan/framer/Makefile new file mode 100644 index 000000000000..78dbd8e563d0 --- /dev/null +++ b/drivers/net/wan/framer/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the framer drivers. +# + +obj-$(CONFIG_GENERIC_FRAMER) += framer-core.o diff --git a/drivers/net/wan/framer/framer-core.c b/drivers/net/wan/framer/framer-core.c new file mode 100644 index 000000000000..a8f34ba993e4 --- /dev/null +++ b/drivers/net/wan/framer/framer-core.c @@ -0,0 +1,887 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Generic Framer framework. + * + * Copyright 2023 CS GROUP France + * + * Author: Herve Codina herve.codina@bootlin.com + */ + +#include <linux/device.h> +#include <linux/framer/framer.h> +#include <linux/framer/framer-provider.h> +#include <linux/idr.h> +#include <linux/module.h> +#include <linux/notifier.h> +#include <linux/of.h> +#include <linux/pm_runtime.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +static struct class *framer_class; +static DEFINE_MUTEX(framer_provider_mutex); +static LIST_HEAD(framer_provider_list); +static DEFINE_IDA(framer_ida); + +#define dev_to_framer(a) (container_of((a), struct framer, dev)) + +int framer_pm_runtime_get(struct framer *framer) +{ + int ret; + + if (!pm_runtime_enabled(&framer->dev)) + return -EOPNOTSUPP; + + ret = pm_runtime_get(&framer->dev); + if (ret < 0 && ret != -EINPROGRESS) + pm_runtime_put_noidle(&framer->dev); + + return ret; +} +EXPORT_SYMBOL_GPL(framer_pm_runtime_get); + +int framer_pm_runtime_get_sync(struct framer *framer) +{ + int ret; + + if (!pm_runtime_enabled(&framer->dev)) + return -EOPNOTSUPP; + + ret = pm_runtime_get_sync(&framer->dev); + if (ret < 0) + pm_runtime_put_sync(&framer->dev); + + return ret; +} +EXPORT_SYMBOL_GPL(framer_pm_runtime_get_sync); + +int framer_pm_runtime_put(struct framer *framer) +{ + if (!pm_runtime_enabled(&framer->dev)) + return -EOPNOTSUPP; + + return pm_runtime_put(&framer->dev); +} +EXPORT_SYMBOL_GPL(framer_pm_runtime_put); + +int framer_pm_runtime_put_sync(struct framer *framer) +{ + if (!pm_runtime_enabled(&framer->dev)) + return -EOPNOTSUPP; + + return pm_runtime_put_sync(&framer->dev); +} +EXPORT_SYMBOL_GPL(framer_pm_runtime_put_sync); + +/** + * framer_init - framer internal initialization before framer operation + * @framer: the framer returned by framer_get() + * + * Used to allow framer's driver to perform framer internal initialization, + * such as PLL block powering, clock initialization or anything that's + * is required by the framer to perform the start of operation. + * Must be called before framer_power_on(). + * + * Return: %0 if successful, a negative error code otherwise + */ +int framer_init(struct framer *framer) +{ + bool start_polling = false; + int ret; + + ret = framer_pm_runtime_get_sync(framer); + if (ret < 0 && ret != -EOPNOTSUPP) + return ret; + ret = 0; /* Override possible ret == -EOPNOTSUPP */ + + mutex_lock(&framer->mutex); + if (framer->power_count > framer->init_count) + dev_warn(&framer->dev, "framer_power_on was called before framer init\n"); + + if (framer->init_count == 0) { + if (framer->ops->init) { + ret = framer->ops->init(framer); + if (ret < 0) { + dev_err(&framer->dev, "framer init failed --> %d\n", ret); + goto out; + } + } + if (framer->ops->flags & FRAMER_FLAG_POLL_STATUS) + start_polling = true; + } + ++framer->init_count; + +out: + mutex_unlock(&framer->mutex); + + if (!ret && start_polling) { + ret = framer_get_status(framer, &framer->prev_status); + if (ret < 0) { + dev_warn(&framer->dev, "framer get status failed --> %d\n", ret); + /* Will be retried on polling_work */ + ret = 0; + } + queue_delayed_work(system_power_efficient_wq, &framer->polling_work, 1 * HZ); + } + + framer_pm_runtime_put(framer); + return ret; +} +EXPORT_SYMBOL_GPL(framer_init); + +/** + * framer_exit - Framer internal un-initialization + * @framer: the framer returned by framer_get() + * + * Must be called after framer_power_off(). + */ +int framer_exit(struct framer *framer) +{ + int ret; + + ret = framer_pm_runtime_get_sync(framer); + if (ret < 0 && ret != -EOPNOTSUPP) + return ret; + ret = 0; /* Override possible ret == -EOPNOTSUPP */ + + mutex_lock(&framer->mutex); + --framer->init_count; + if (framer->init_count == 0) { + if (framer->ops->flags & FRAMER_FLAG_POLL_STATUS) { + mutex_unlock(&framer->mutex); + cancel_delayed_work_sync(&framer->polling_work); + mutex_lock(&framer->mutex); + } + + if (framer->ops->exit) + framer->ops->exit(framer); + } + + mutex_unlock(&framer->mutex); + framer_pm_runtime_put(framer); + return ret; +} +EXPORT_SYMBOL_GPL(framer_exit); + +/** + * framer_power_on - Enable the framer and enter proper operation + * @framer: the framer returned by framer_get() + * + * Must be called after framer_init(). + * + * Return: %0 if successful, a negative error code otherwise + */ +int framer_power_on(struct framer *framer) +{ + int ret; + + if (framer->pwr) { + ret = regulator_enable(framer->pwr); + if (ret) + return ret; + } + + ret = framer_pm_runtime_get_sync(framer); + if (ret < 0 && ret != -EOPNOTSUPP) + goto err_pm_sync; + + ret = 0; /* Override possible ret == -EOPNOTSUPP */ + + mutex_lock(&framer->mutex); + if (framer->power_count == 0 && framer->ops->power_on) { + ret = framer->ops->power_on(framer); + if (ret < 0) { + dev_err(&framer->dev, "framer poweron failed --> %d\n", ret); + goto err_pwr_on; + } + } + ++framer->power_count; + mutex_unlock(&framer->mutex); + return 0; + +err_pwr_on: + mutex_unlock(&framer->mutex); + framer_pm_runtime_put_sync(framer); +err_pm_sync: + if (framer->pwr) + regulator_disable(framer->pwr); + return ret; +} +EXPORT_SYMBOL_GPL(framer_power_on); + +/** + * framer_power_off - Disable the framer. + * @framer: the framer returned by framer_get() + * + * Must be called before framer_exit(). + * + * Return: %0 if successful, a negative error code otherwise + */ +int framer_power_off(struct framer *framer) +{ + int ret; + + mutex_lock(&framer->mutex); + if (framer->power_count == 1 && framer->ops->power_off) { + ret = framer->ops->power_off(framer); + if (ret < 0) { + dev_err(&framer->dev, "framer poweroff failed --> %d\n", ret); + mutex_unlock(&framer->mutex); + return ret; + } + } + --framer->power_count; + mutex_unlock(&framer->mutex); + framer_pm_runtime_put(framer); + + if (framer->pwr) + regulator_disable(framer->pwr); + + return 0; +} +EXPORT_SYMBOL_GPL(framer_power_off); + +/** + * framer_get_status() - Gets the framer status + * @framer: the framer returned by framer_get() + * @status: the status to retrieve + * + * Used to get the framer status. framer_init() must have been called + * on the framer. + * + * Return: %0 if successful, a negative error code otherwise + */ +int framer_get_status(struct framer *framer, struct framer_status *status) +{ + int ret; + + if (!framer->ops->get_status) + return -EOPNOTSUPP; + + /* Be sure to have known values (struct padding and future extensions) */ + memset(status, 0, sizeof(*status)); + + mutex_lock(&framer->mutex); + ret = framer->ops->get_status(framer, status); + mutex_unlock(&framer->mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(framer_get_status); + +/** + * framer_set_config() - Sets the framer configuration + * @framer: the framer returned by framer_get() + * @config: the configuration to set + * + * Used to set the framer configuration. framer_init() must have been called + * on the framer. + * + * Return: %0 if successful, a negative error code otherwise + */ +int framer_set_config(struct framer *framer, const struct framer_config *config) +{ + int ret; + + if (!framer->ops->set_config) + return -EOPNOTSUPP; + + mutex_lock(&framer->mutex); + ret = framer->ops->set_config(framer, config); + mutex_unlock(&framer->mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(framer_set_config); + +/** + * framer_get_config() - Gets the framer configuration + * @framer: the framer returned by framer_get() + * @config: the configuration to retrieve + * + * Used to get the framer configuration. framer_init() must have been called + * on the framer. + * + * Return: %0 if successful, a negative error code otherwise + */ +int framer_get_config(struct framer *framer, struct framer_config *config) +{ + int ret; + + if (!framer->ops->get_config) + return -EOPNOTSUPP; + + mutex_lock(&framer->mutex); + ret = framer->ops->get_config(framer, config); + mutex_unlock(&framer->mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(framer_get_config); + +static void framer_polling_work(struct work_struct *work) +{ + struct framer *framer = container_of(work, struct framer, polling_work.work); + struct framer_status status; + int ret; + + ret = framer_get_status(framer, &status); + if (ret) { + dev_err(&framer->dev, "polling, get status failed (%d)\n", ret); + goto end; + } + if (memcmp(&framer->prev_status, &status, sizeof(status))) { + blocking_notifier_call_chain(&framer->notifier_list, + FRAMER_EVENT_STATUS, NULL); + memcpy(&framer->prev_status, &status, sizeof(status)); + } + +end: + /* Re-schedule task in 1 sec */ + queue_delayed_work(system_power_efficient_wq, &framer->polling_work, 1 * HZ); +} + +/** + * framer_notifier_register() - Registers a notifier + * @framer: the framer returned by framer_get() + * @nb: the notifier block to register + * + * Used to register a notifier block on framer events. framer_init() must have + * been called on the framer. + * The available framer events are present in enum framer_events. + * + * Return: %0 if successful, a negative error code otherwise + */ +int framer_notifier_register(struct framer *framer, struct notifier_block *nb) +{ + return blocking_notifier_chain_register(&framer->notifier_list, nb); +} +EXPORT_SYMBOL_GPL(framer_notifier_register); + +/** + * framer_notifier_unregister() - Unregisters a notifier + * @framer: the framer returned by framer_get() + * @nb: the notifier block to unregister + * + * Used to unregister a notifier block. framer_init() must have + * been called on the framer. + * + * Return: %0 if successful, a negative error code otherwise + */ +int framer_notifier_unregister(struct framer *framer, struct notifier_block *nb) +{ + return blocking_notifier_chain_unregister(&framer->notifier_list, nb); +} +EXPORT_SYMBOL_GPL(framer_notifier_unregister); + +static struct framer_provider *framer_provider_of_lookup(const struct device_node *node) +{ + struct framer_provider *framer_provider; + + list_for_each_entry(framer_provider, &framer_provider_list, list) { + if (device_match_of_node(framer_provider->dev, node)) + return framer_provider; + } + + return ERR_PTR(-EPROBE_DEFER); +} + +static struct framer *framer_of_get_from_provider(struct of_phandle_args *args) +{ + struct framer_provider *framer_provider; + struct framer *framer; + + mutex_lock(&framer_provider_mutex); + framer_provider = framer_provider_of_lookup(args->np); + if (IS_ERR(framer_provider) || !try_module_get(framer_provider->owner)) { + framer = ERR_PTR(-EPROBE_DEFER); + goto end; + } + + framer = framer_provider->of_xlate(framer_provider->dev, args); + + module_put(framer_provider->owner); + +end: + mutex_unlock(&framer_provider_mutex); + + return framer; +} + +static struct framer *framer_of_get_byphandle(struct device_node *np, const char *propname, + int index) +{ + struct of_phandle_args args; + struct framer *framer; + int ret; + + ret = of_parse_phandle_with_optional_args(np, propname, "#framer-cells", index, &args); + if (ret) + return ERR_PTR(-ENODEV); + + if (!of_device_is_available(args.np)) { + framer = ERR_PTR(-ENODEV); + goto out_node_put; + } + + framer = framer_of_get_from_provider(&args); + +out_node_put: + of_node_put(args.np); + + return framer; +} + +static struct framer *framer_of_get_byparent(struct device_node *np, int index) +{ + struct of_phandle_args args; + struct framer *framer; + + args.np = of_get_parent(np); + args.args_count = 1; + args.args[0] = index; + + while (args.np) { + framer = framer_of_get_from_provider(&args); + if (IS_ERR(framer) && PTR_ERR(framer) != -EPROBE_DEFER) { + args.np = of_get_next_parent(args.np); + continue; + } + of_node_put(args.np); + return framer; + } + + return ERR_PTR(-ENODEV); +} + +/** + * framer_get() - lookup and obtain a reference to a framer. + * @dev: device that requests the framer + * @con_id: name of the framer from device's point of view + * + * Returns the framer driver, after getting a refcount to it; or + * -ENODEV if there is no such framer. The caller is responsible for + * calling framer_put() to release that count. + */ +struct framer *framer_get(struct device *dev, const char *con_id) +{ + struct framer *framer = ERR_PTR(-ENODEV); + struct device_link *link; + int ret; + + if (dev->of_node) { + if (con_id) + framer = framer_of_get_byphandle(dev->of_node, con_id, 0); + else + framer = framer_of_get_byparent(dev->of_node, 0); + } + + if (IS_ERR(framer)) + return framer; + + get_device(&framer->dev); + + if (!try_module_get(framer->ops->owner)) { + ret = -EPROBE_DEFER; + goto err_put_device; + } + + link = device_link_add(dev, &framer->dev, DL_FLAG_STATELESS); + if (!link) { + dev_err(dev, "failed to create device_link to %s\n", dev_name(&framer->dev)); + ret = -EPROBE_DEFER; + goto err_module_put; + } + + return framer; + +err_module_put: + module_put(framer->ops->owner); +err_put_device: + put_device(&framer->dev); + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(framer_get); + +/** + * framer_put() - release the framer + * @dev: device that wants to release this framer + * @framer: the framer returned by framer_get() + * + * Releases a refcount the caller received from framer_get(). + */ +void framer_put(struct device *dev, struct framer *framer) +{ + device_link_remove(dev, &framer->dev); + + module_put(framer->ops->owner); + put_device(&framer->dev); +} +EXPORT_SYMBOL_GPL(framer_put); + +static void devm_framer_put(struct device *dev, void *res) +{ + struct framer *framer = *(struct framer **)res; + + framer_put(dev, framer); +} + +/** + * devm_framer_get() - lookup and obtain a reference to a framer. + * @dev: device that requests this framer + * @con_id: name of the framer from device's point of view + * + * Gets the framer using framer_get(), and associates a device with it using + * devres. On driver detach, framer_put() function is invoked on the devres + * data, then, devres data is freed. + */ +struct framer *devm_framer_get(struct device *dev, const char *con_id) +{ + struct framer **ptr, *framer; + + ptr = devres_alloc(devm_framer_put, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + framer = framer_get(dev, con_id); + if (!IS_ERR(framer)) { + *ptr = framer; + devres_add(dev, ptr); + } else { + devres_free(ptr); + return framer; + } + + return framer; +} +EXPORT_SYMBOL_GPL(devm_framer_get); + +/** + * devm_framer_optional_get() - lookup and obtain a reference to an optional + * framer. + * @dev: device that requests this framer + * @con_id: name of the framer from device's point of view + * + * Same as devm_framer_get() except that if the framer does not exist, it is not + * considered an error and -ENODEV will not be returned. Instead the NULL framer + * is returned. + */ +struct framer *devm_framer_optional_get(struct device *dev, const char *con_id) +{ + struct framer *framer = devm_framer_get(dev, con_id); + + if (PTR_ERR(framer) == -ENODEV) + framer = NULL; + + return framer; +} +EXPORT_SYMBOL_GPL(devm_framer_optional_get); + +static void framer_notify_status_work(struct work_struct *work) +{ + struct framer *framer = container_of(work, struct framer, notify_status_work); + + blocking_notifier_call_chain(&framer->notifier_list, FRAMER_EVENT_STATUS, NULL); +} + +void framer_notify_status_change(struct framer *framer) +{ + /* Can be called from atomic context -> just schedule a task to call + * blocking notifiers + */ + queue_work(system_power_efficient_wq, &framer->notify_status_work); +} +EXPORT_SYMBOL_GPL(framer_notify_status_change); + +/** + * framer_create() - create a new framer + * @dev: device that is creating the new framer + * @node: device node of the framer. default to dev->of_node. + * @ops: function pointers for performing framer operations + * + * Called to create a framer using framer framework. + */ +struct framer *framer_create(struct device *dev, struct device_node *node, + const struct framer_ops *ops) +{ + struct framer *framer; + int ret; + int id; + + if (WARN_ON(!dev)) + return ERR_PTR(-EINVAL); + + /* get_status() is mandatory if the provider ask for polling status */ + if (WARN_ON((ops->flags & FRAMER_FLAG_POLL_STATUS) && !ops->get_status)) + return ERR_PTR(-EINVAL); + + framer = kzalloc(sizeof(*framer), GFP_KERNEL); + if (!framer) + return ERR_PTR(-ENOMEM); + + id = ida_alloc(&framer_ida, GFP_KERNEL); + if (id < 0) { + dev_err(dev, "unable to get id\n"); + ret = id; + goto free_framer; + } + + device_initialize(&framer->dev); + mutex_init(&framer->mutex); + INIT_WORK(&framer->notify_status_work, framer_notify_status_work); + INIT_DELAYED_WORK(&framer->polling_work, framer_polling_work); + BLOCKING_INIT_NOTIFIER_HEAD(&framer->notifier_list); + + framer->dev.class = framer_class; + framer->dev.parent = dev; + framer->dev.of_node = node ? node : dev->of_node; + framer->id = id; + framer->ops = ops; + + ret = dev_set_name(&framer->dev, "framer-%s.%d", dev_name(dev), id); + if (ret) + goto put_dev; + + /* framer-supply */ + framer->pwr = regulator_get_optional(&framer->dev, "framer"); + if (IS_ERR(framer->pwr)) { + ret = PTR_ERR(framer->pwr); + if (ret == -EPROBE_DEFER) + goto put_dev; + + framer->pwr = NULL; + } + + ret = device_add(&framer->dev); + if (ret) + goto put_dev; + + if (pm_runtime_enabled(dev)) { + pm_runtime_enable(&framer->dev); + pm_runtime_no_callbacks(&framer->dev); + } + + return framer; + +put_dev: + put_device(&framer->dev); /* calls framer_release() which frees resources */ + return ERR_PTR(ret); + +free_framer: + kfree(framer); + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(framer_create); + +/** + * framer_destroy() - destroy the framer + * @framer: the framer to be destroyed + * + * Called to destroy the framer. + */ +void framer_destroy(struct framer *framer) +{ + /* polling_work should already be stopped but if framer_exit() was not + * called (bug), here it's the last time to do that ... + */ + cancel_delayed_work_sync(&framer->polling_work); + cancel_work_sync(&framer->notify_status_work); + pm_runtime_disable(&framer->dev); + device_unregister(&framer->dev); /* calls framer_release() which frees resources */ +} +EXPORT_SYMBOL_GPL(framer_destroy); + +static void devm_framer_destroy(struct device *dev, void *res) +{ + struct framer *framer = *(struct framer **)res; + + framer_destroy(framer); +} + +/** + * devm_framer_create() - create a new framer + * @dev: device that is creating the new framer + * @node: device node of the framer + * @ops: function pointers for performing framer operations + * + * Creates a new framer device adding it to the framer class. + * While at that, it also associates the device with the framer using devres. + * On driver detach, release function is invoked on the devres data, + * then, devres data is freed. + */ +struct framer *devm_framer_create(struct device *dev, struct device_node *node, + const struct framer_ops *ops) +{ + struct framer **ptr, *framer; + + ptr = devres_alloc(devm_framer_destroy, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + framer = framer_create(dev, node, ops); + if (!IS_ERR(framer)) { + *ptr = framer; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return framer; +} +EXPORT_SYMBOL_GPL(devm_framer_create); + +/** + * framer_provider_simple_of_xlate() - returns the framer instance from framer provider + * @dev: the framer provider device + * @args: of_phandle_args (not used here) + * + * Intended to be used by framer provider for the common case where #framer-cells is + * 0. For other cases where #framer-cells is greater than '0', the framer provider + * should provide a custom of_xlate function that reads the *args* and returns + * the appropriate framer. + */ +struct framer *framer_provider_simple_of_xlate(struct device *dev, struct of_phandle_args *args) +{ + struct class_dev_iter iter; + struct framer *framer; + + class_dev_iter_init(&iter, framer_class, NULL, NULL); + while ((dev = class_dev_iter_next(&iter))) { + framer = dev_to_framer(dev); + if (args->np != framer->dev.of_node) + continue; + + class_dev_iter_exit(&iter); + return framer; + } + + class_dev_iter_exit(&iter); + return ERR_PTR(-ENODEV); +} +EXPORT_SYMBOL_GPL(framer_provider_simple_of_xlate); + +/** + * __framer_provider_of_register() - create/register framer provider with the framework + * @dev: struct device of the framer provider + * @owner: the module owner containing of_xlate + * @of_xlate: function pointer to obtain framer instance from framer provider + * + * Creates struct framer_provider from dev and of_xlate function pointer. + * This is used in the case of dt boot for finding the framer instance from + * framer provider. + */ +struct framer_provider * +__framer_provider_of_register(struct device *dev, struct module *owner, + struct framer *(*of_xlate)(struct device *dev, + struct of_phandle_args *args)) +{ + struct framer_provider *framer_provider; + + framer_provider = kzalloc(sizeof(*framer_provider), GFP_KERNEL); + if (!framer_provider) + return ERR_PTR(-ENOMEM); + + framer_provider->dev = dev; + framer_provider->owner = owner; + framer_provider->of_xlate = of_xlate; + + of_node_get(framer_provider->dev->of_node); + + mutex_lock(&framer_provider_mutex); + list_add_tail(&framer_provider->list, &framer_provider_list); + mutex_unlock(&framer_provider_mutex); + + return framer_provider; +} +EXPORT_SYMBOL_GPL(__framer_provider_of_register); + +/** + * framer_provider_of_unregister() - unregister framer provider from the framework + * @framer_provider: framer provider returned by framer_provider_of_register() + * + * Removes the framer_provider created using framer_provider_of_register(). + */ +void framer_provider_of_unregister(struct framer_provider *framer_provider) +{ + mutex_lock(&framer_provider_mutex); + list_del(&framer_provider->list); + mutex_unlock(&framer_provider_mutex); + + of_node_put(framer_provider->dev->of_node); + kfree(framer_provider); +} +EXPORT_SYMBOL_GPL(framer_provider_of_unregister); + +static void devm_framer_provider_of_unregister(struct device *dev, void *res) +{ + struct framer_provider *framer_provider = *(struct framer_provider **)res; + + framer_provider_of_unregister(framer_provider); +} + +/** + * __devm_framer_provider_of_register() - create/register framer provider with + * the framework + * @dev: struct device of the framer provider + * @owner: the module owner containing of_xlate + * @of_xlate: function pointer to obtain framer instance from framer provider + * + * Creates struct framer_provider from dev and of_xlate function pointer. + * This is used in the case of dt boot for finding the framer instance from + * framer provider. While at that, it also associates the device with the + * framer provider using devres. On driver detach, release function is invoked + * on the devres data, then, devres data is freed. + */ +struct framer_provider * +__devm_framer_provider_of_register(struct device *dev, struct module *owner, + struct framer *(*of_xlate)(struct device *dev, + struct of_phandle_args *args)) +{ + struct framer_provider **ptr, *framer_provider; + + ptr = devres_alloc(devm_framer_provider_of_unregister, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + framer_provider = __framer_provider_of_register(dev, owner, of_xlate); + if (!IS_ERR(framer_provider)) { + *ptr = framer_provider; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return framer_provider; +} +EXPORT_SYMBOL_GPL(__devm_framer_provider_of_register); + +/** + * framer_release() - release the framer + * @dev: the dev member within framer + * + * When the last reference to the device is removed, it is called + * from the embedded kobject as release method. + */ +static void framer_release(struct device *dev) +{ + struct framer *framer; + + framer = dev_to_framer(dev); + regulator_put(framer->pwr); + ida_free(&framer_ida, framer->id); + kfree(framer); +} + +static int __init framer_core_init(void) +{ + framer_class = class_create("framer"); + if (IS_ERR(framer_class)) { + pr_err("failed to create framer class (%pe)\n", framer_class); + return PTR_ERR(framer_class); + } + + framer_class->dev_release = framer_release; + + return 0; +} +device_initcall(framer_core_init); diff --git a/include/linux/framer/framer-provider.h b/include/linux/framer/framer-provider.h new file mode 100644 index 000000000000..782cd5fc83d5 --- /dev/null +++ b/include/linux/framer/framer-provider.h @@ -0,0 +1,194 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Generic framer profider header file + * + * Copyright 2023 CS GROUP France + * + * Author: Herve Codina herve.codina@bootlin.com + */ + +#ifndef __DRIVERS_PROVIDER_FRAMER_H +#define __DRIVERS_PROVIDER_FRAMER_H + +#include <linux/export.h> +#include <linux/framer/framer.h> +#include <linux/types.h> + +#define FRAMER_FLAG_POLL_STATUS BIT(0) + +/** + * struct framer_ops - set of function pointers for performing framer operations + * @init: operation to be performed for initializing the framer + * @exit: operation to be performed while exiting + * @power_on: powering on the framer + * @power_off: powering off the framer + * @flags: OR-ed flags (FRAMER_FLAG_*) to ask for core functionality + * - @FRAMER_FLAG_POLL_STATUS: + * Ask the core to perform a polling to get the framer status and + * notify consumers on change. + * The framer should call @framer_notify_status_change() when it + * detects a status change. This is usually done using interrupts. + * If the framer cannot detect this change, it can ask the core for + * a status polling. The core will call @get_status() periodically + * and, on change detected, it will notify the consumer. + * the @get_status() + * @owner: the module owner containing the ops + */ +struct framer_ops { + int (*init)(struct framer *framer); + void (*exit)(struct framer *framer); + int (*power_on)(struct framer *framer); + int (*power_off)(struct framer *framer); + + /** + * @get_status: + * + * Optional. + * + * Used to get the framer status. framer_init() must have + * been called on the framer. + * + * Returns: 0 if successful, an negative error code otherwise + */ + int (*get_status)(struct framer *framer, struct framer_status *status); + + /** + * @set_config: + * + * Optional. + * + * Used to set the framer configuration. framer_init() must have + * been called on the framer. + * + * Returns: 0 if successful, an negative error code otherwise + */ + int (*set_config)(struct framer *framer, const struct framer_config *config); + + /** + * @get_config: + * + * Optional. + * + * Used to get the framer configuration. framer_init() must have + * been called on the framer. + * + * Returns: 0 if successful, an negative error code otherwise + */ + int (*get_config)(struct framer *framer, struct framer_config *config); + + u32 flags; + struct module *owner; +}; + +/** + * struct framer_provider - represents the framer provider + * @dev: framer provider device + * @children: can be used to override the default (dev->of_node) child node + * @owner: the module owner having of_xlate + * @list: to maintain a linked list of framer providers + * @of_xlate: function pointer to obtain framer instance from framer pointer + */ +struct framer_provider { + struct device *dev; + struct module *owner; + struct list_head list; + struct framer * (*of_xlate)(struct device *dev, + struct of_phandle_args *args); +}; + +static inline void framer_set_drvdata(struct framer *framer, void *data) +{ + dev_set_drvdata(&framer->dev, data); +} + +static inline void *framer_get_drvdata(struct framer *framer) +{ + return dev_get_drvdata(&framer->dev); +} + +#if IS_ENABLED(CONFIG_GENERIC_FRAMER) + +/* Create and destroy a framer */ +struct framer *framer_create(struct device *dev, struct device_node *node, + const struct framer_ops *ops); +void framer_destroy(struct framer *framer); + +/* devm version */ +struct framer *devm_framer_create(struct device *dev, struct device_node *node, + const struct framer_ops *ops); + +struct framer *framer_provider_simple_of_xlate(struct device *dev, + struct of_phandle_args *args); + +struct framer_provider * +__framer_provider_of_register(struct device *dev, struct module *owner, + struct framer *(*of_xlate)(struct device *dev, + struct of_phandle_args *args)); + +void framer_provider_of_unregister(struct framer_provider *framer_provider); + +struct framer_provider * +__devm_framer_provider_of_register(struct device *dev, struct module *owner, + struct framer *(*of_xlate)(struct device *dev, + struct of_phandle_args *args)); + +void framer_notify_status_change(struct framer *framer); + +#else /* IS_ENABLED(CONFIG_GENERIC_FRAMER) */ + +static inline struct framer *framer_create(struct device *dev, struct device_node *node, + const struct framer_ops *ops) +{ + return ERR_PTR(-ENOSYS); +} + +static inline void framer_destroy(struct framer *framer) +{ +} + +/* devm version */ +static inline struct framer *devm_framer_create(struct device *dev, struct device_node *node, + const struct framer_ops *ops) +{ + return ERR_PTR(-ENOSYS); +} + +static inline struct framer *framer_provider_simple_of_xlate(struct device *dev, + struct of_phandle_args *args) +{ + return ERR_PTR(-ENOSYS); +} + +static inline struct framer_provider * +__framer_provider_of_register(struct device *dev, struct module *owner, + struct framer *(*of_xlate)(struct device *dev, + struct of_phandle_args *args)) +{ + return ERR_PTR(-ENOSYS); +} + +void framer_provider_of_unregister(struct framer_provider *framer_provider) +{ +} + +static inline struct framer_provider * +__devm_framer_provider_of_register(struct device *dev, struct module *owner, + struct framer *(*of_xlate)(struct device *dev, + struct of_phandle_args *args)) +{ + return ERR_PTR(-ENOSYS); +} + +void framer_notify_status_change(struct framer *framer) +{ +} + +#endif /* IS_ENABLED(CONFIG_GENERIC_FRAMER) */ + +#define framer_provider_of_register(dev, xlate) \ + __framer_provider_of_register((dev), THIS_MODULE, (xlate)) + +#define devm_framer_provider_of_register(dev, xlate) \ + __devm_framer_provider_of_register((dev), THIS_MODULE, (xlate)) + +#endif /* __DRIVERS_PROVIDER_FRAMER_H */ diff --git a/include/linux/framer/framer.h b/include/linux/framer/framer.h new file mode 100644 index 000000000000..9a9b88962c29 --- /dev/null +++ b/include/linux/framer/framer.h @@ -0,0 +1,205 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Generic framer header file + * + * Copyright 2023 CS GROUP France + * + * Author: Herve Codina herve.codina@bootlin.com + */ + +#ifndef __DRIVERS_FRAMER_H +#define __DRIVERS_FRAMER_H + +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/notifier.h> +#include <linux/of.h> +#include <linux/device.h> +#include <linux/workqueue.h> + +/** + * enum framer_iface - Framer interface + * @FRAMER_IFACE_E1: E1 interface + * @FRAMER_IFACE_T1: T1 interface + */ +enum framer_iface { + FRAMER_IFACE_E1, + FRAMER_IFACE_T1, +}; + +/** + * enum framer_clock_type - Framer clock type + * @FRAMER_CLOCK_EXT: External clock + * @FRAMER_CLOCK_INT: Internal clock + */ +enum framer_clock_type { + FRAMER_CLOCK_EXT, + FRAMER_CLOCK_INT, +}; + +/** + * struct framer_config - Framer configuration + * @iface: Framer line interface + * @clock_type: Framer clock type + * @line_clock_rate: Framer line clock rate + */ +struct framer_config { + enum framer_iface iface; + enum framer_clock_type clock_type; + unsigned long line_clock_rate; +}; + +/** + * struct framer_status - Framer status + * @link_is_on: Framer link state. true, the link is on, false, the link is off. + */ +struct framer_status { + bool link_is_on; +}; + +/** + * enum framer_event - Event available for notification + * @FRAMER_EVENT_STATUS: Event notified on framer_status changes + */ +enum framer_event { + FRAMER_EVENT_STATUS, +}; + +/** + * struct framer - represents the framer device + * @dev: framer device + * @id: id of the framer device + * @ops: function pointers for performing framer operations + * @mutex: mutex to protect framer_ops + * @init_count: used to protect when the framer is used by multiple consumers + * @power_count: used to protect when the framer is used by multiple consumers + * @pwr: power regulator associated with the framer + * @notify_status_work: work structure used for status notifications + * @notifier_list: notifier list used for notifications + * @polling_work: delayed work structure used for the polling task + * @prev_status: previous read status used by the polling task to detect changes + */ +struct framer { + struct device dev; + int id; + const struct framer_ops *ops; + struct mutex mutex; /* Protect framer */ + int init_count; + int power_count; + struct regulator *pwr; + struct work_struct notify_status_work; + struct blocking_notifier_head notifier_list; + struct delayed_work polling_work; + struct framer_status prev_status; +}; + +#if IS_ENABLED(CONFIG_GENERIC_FRAMER) +int framer_pm_runtime_get(struct framer *framer); +int framer_pm_runtime_get_sync(struct framer *framer); +int framer_pm_runtime_put(struct framer *framer); +int framer_pm_runtime_put_sync(struct framer *framer); +int framer_init(struct framer *framer); +int framer_exit(struct framer *framer); +int framer_power_on(struct framer *framer); +int framer_power_off(struct framer *framer); +int framer_get_status(struct framer *framer, struct framer_status *status); +int framer_get_config(struct framer *framer, struct framer_config *config); +int framer_set_config(struct framer *framer, const struct framer_config *config); +int framer_notifier_register(struct framer *framer, struct notifier_block *nb); +int framer_notifier_unregister(struct framer *framer, struct notifier_block *nb); + +struct framer *framer_get(struct device *dev, const char *con_id); +void framer_put(struct device *dev, struct framer *framer); + +struct framer *devm_framer_get(struct device *dev, const char *con_id); +struct framer *devm_framer_optional_get(struct device *dev, const char *con_id); +#else +static inline int framer_pm_runtime_get(struct framer *framer) +{ + return -ENOSYS; +} + +static inline int framer_pm_runtime_get_sync(struct framer *framer) +{ + return -ENOSYS; +} + +static inline int framer_pm_runtime_put(struct framer *framer) +{ + return -ENOSYS; +} + +static inline int framer_pm_runtime_put_sync(struct framer *framer) +{ + return -ENOSYS; +} + +static inline int framer_init(struct framer *framer) +{ + return -ENOSYS; +} + +static inline int framer_exit(struct framer *framer) +{ + return -ENOSYS; +} + +static inline int framer_power_on(struct framer *framer) +{ + return -ENOSYS; +} + +static inline int framer_power_off(struct framer *framer) +{ + return -ENOSYS; +} + +static inline int framer_get_status(struct framer *framer, struct framer_status *status) +{ + return -ENOSYS; +} + +static inline int framer_get_config(struct framer *framer, struct framer_config *config) +{ + return -ENOSYS; +} + +static inline int framer_set_config(struct framer *framer, const struct framer_config *config) +{ + return -ENOSYS; +} + +static inline int framer_notifier_register(struct framer *framer, + struct notifier_block *nb) +{ + return -ENOSYS; +} + +static inline int framer_notifier_unregister(struct framer *framer, + struct notifier_block *nb) +{ + return -ENOSYS; +} + +struct framer *framer_get(struct device *dev, const char *con_id) +{ + return ERR_PTR(-ENOSYS); +} + +void framer_put(struct device *dev, struct framer *framer) +{ +} + +static inline struct framer *devm_framer_get(struct device *dev, const char *con_id) +{ + return ERR_PTR(-ENOSYS); +} + +static inline struct framer *devm_framer_optional_get(struct device *dev, const char *con_id) +{ + return NULL; +} + +#endif + +#endif /* __DRIVERS_FRAMER_H */

The Lantiq PEF2256 is a framer and line interface component designed to fulfill all required interfacing between an analog E1/T1/J1 line and the digital PCM system highway/H.100 bus.

Signed-off-by: Herve Codina herve.codina@bootlin.com Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu --- .../bindings/net/lantiq,pef2256.yaml | 214 ++++++++++++++++++ 1 file changed, 214 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/lantiq,pef2256.yaml

diff --git a/Documentation/devicetree/bindings/net/lantiq,pef2256.yaml b/Documentation/devicetree/bindings/net/lantiq,pef2256.yaml new file mode 100644 index 000000000000..c4f21678bf6a --- /dev/null +++ b/Documentation/devicetree/bindings/net/lantiq,pef2256.yaml @@ -0,0 +1,214 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/lantiq,pef2256.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lantiq PEF2256 + +maintainers: + - Herve Codina herve.codina@bootlin.com + +description: + The Lantiq PEF2256, also known as Infineon PEF2256 or FALC56, is a framer and + line interface component designed to fulfill all required interfacing between + an analog E1/T1/J1 line and the digital PCM system highway/H.100 bus. + +properties: + compatible: + items: + - const: lantiq,pef2256 + + reg: + maxItems: 1 + + clocks: + items: + - description: Master clock + - description: System Clock Receive + - description: System Clock Transmit + + clock-names: + items: + - const: mclk + - const: sclkr + - const: sclkx + + interrupts: + maxItems: 1 + + reset-gpios: + description: + GPIO used to reset the device. + maxItems: 1 + + pinctrl: + $ref: /schemas/pinctrl/pinctrl.yaml# + additionalProperties: false + + patternProperties: + '-pins$': + type: object + $ref: /schemas/pinctrl/pinmux-node.yaml# + additionalProperties: false + + properties: + pins: + enum: [ RPA, RPB, RPC, RPD, XPA, XPB, XPC, XPD ] + + function: + enum: [ SYPR, RFM, RFMB, RSIGM, RSIG, DLR, FREEZE, RFSP, LOS, + SYPX, XFMS, XSIG, TCLK, XMFB, XSIGM, DLX, XCLK, XLT, + GPI, GPOH, GPOL ] + + required: + - pins + - function + + lantiq,data-rate-bps: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2048000, 4096000, 8192000, 16384000] + default: 2048000 + description: + Data rate (bit per seconds) on the system highway. + + lantiq,clock-falling-edge: + $ref: /schemas/types.yaml#/definitions/flag + description: + Data is sent on falling edge of the clock (and received on the rising + edge). If 'clock-falling-edge' is not present, data is sent on the + rising edge (and received on the falling edge). + + lantiq,channel-phase: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + default: 0 + description: | + The pef2256 delivers a full frame (32 8bit time-slots in E1 and 24 8bit + time-slots 8 8bit signaling in E1/J1) every 125us. This lead to a data + rate of 2048000 bit/s. When lantiq,data-rate-bps is more than 2048000 + bit/s, the data (all 32 8bit) present in the frame are interleave with + unused time-slots. The lantiq,channel-phase property allows to set the + correct alignment of the interleave mechanism. + For instance, suppose lantiq,data-rate-bps = 8192000 (ie 4*2048000), and + lantiq,channel-phase = 2, the interleave schema with unused time-slots + (nu) and used time-slots (XX) for TSi is + nu nu XX nu nu nu XX nu nu nu XX nu + <-- TSi --> <- TSi+1 -> <- TSi+2 -> + With lantiq,data-rate-bps = 8192000, and lantiq,channel-phase = 1, the + interleave schema is + nu XX nu nu nu XX nu nu nu XX nu nu + <-- TSi --> <- TSi+1 -> <- TSi+2 -> + With lantiq,data-rate-bps = 4096000 (ie 2*2048000), and + lantiq,channel-phase = 1, the interleave schema is + nu XX nu XX nu XX + <-- TSi --> <- TSi+1 -> <- TSi+2 -> + +patternProperties: + '^codec(-([0-9]|[1-2][0-9]|3[0-1]))?$': + type: object + $ref: /schemas/sound/dai-common.yaml + unevaluatedProperties: false + description: + Codec provided by the pef2256. This codec allows to use some of the PCM + system highway time-slots as audio channels to transport audio data over + the E1/T1/J1 lines. + The time-slots used by the codec must be set and so, the properties + 'dai-tdm-slot-num', 'dai-tdm-slot-width', 'dai-tdm-slot-tx-mask' and + 'dai-tdm-slot-rx-mask' must be present in the sound card node for + sub-nodes that involve the codec. The codec uses 8bit time-slots. + 'dai-tdm-tdm-slot-with' must be set to 8. + The tx and rx masks define the pef2256 time-slots assigned to the codec. + + properties: + compatible: + const: lantiq,pef2256-codec + + '#sound-dai-cells': + const: 0 + + required: + - compatible + - '#sound-dai-cells' + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + pef2256: framer@2000000 { + compatible = "lantiq,pef2256"; + reg = <0x2000000 0x100>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&intc>; + clocks = <&clk_mclk>, <&clk_sclkr>, <&clk_sclkx>; + clock-names = "mclk", "sclkr", "sclkx"; + reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + lantiq,data-rate-bps = <4096000>; + + pinctrl { + pef2256_rpa_sypr: rpa-pins { + pins = "RPA"; + function = "SYPR"; + }; + pef2256_xpa_sypx: xpa-pins { + pins = "XPA"; + function = "SYPX"; + }; + }; + + pef2256_codec0: codec-0 { + compatible = "lantiq,pef2256-codec"; + #sound-dai-cells = <0>; + sound-name-prefix = "PEF2256_0"; + }; + + pef2256_codec1: codec-1 { + compatible = "lantiq,pef2256-codec"; + #sound-dai-cells = <0>; + sound-name-prefix = "PEF2256_1"; + }; + }; + + sound { + compatible = "simple-audio-card"; + #address-cells = <1>; + #size-cells = <0>; + simple-audio-card,dai-link@0 { /* CPU DAI1 - pef2256 codec 1 */ + reg = <0>; + cpu { + sound-dai = <&cpu_dai1>; + }; + codec { + sound-dai = <&pef2256_codec0>; + dai-tdm-slot-num = <4>; + dai-tdm-slot-width = <8>; + /* TS 1, 2, 3, 4 */ + dai-tdm-slot-tx-mask = <0 1 1 1 1>; + dai-tdm-slot-rx-mask = <0 1 1 1 1>; + }; + }; + simple-audio-card,dai-link@1 { /* CPU DAI2 - pef2256 codec 2 */ + reg = <1>; + cpu { + sound-dai = <&cpu_dai2>; + }; + codec { + sound-dai = <&pef2256_codec1>; + dai-tdm-slot-num = <4>; + dai-tdm-slot-width = <8>; + /* TS 5, 6, 7, 8 */ + dai-tdm-slot-tx-mask = <0 0 0 0 0 1 1 1 1>; + dai-tdm-slot-rx-mask = <0 0 0 0 0 1 1 1 1>; + }; + }; + };

The loop searching for a matching device based on its compatible string is aborted when a matching disabled device is found. This abort prevents to add devices as soon as one disabled device is found.

Continue searching for an other device instead of aborting on the first disabled one fixes the issue.

Fixes: 22380b65dc70 ("mfd: mfd-core: Ensure disabled devices are ignored without error") Signed-off-by: Herve Codina herve.codina@bootlin.com Reviewed-by: Christophe Leroy christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu --- drivers/mfd/mfd-core.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index 0ed7c0d7784e..2b85509a90fc 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -146,6 +146,7 @@ static int mfd_add_device(struct device *parent, int id, struct platform_device *pdev; struct device_node *np = NULL; struct mfd_of_node_entry *of_entry, *tmp; + bool disabled = false; int ret = -ENOMEM; int platform_id; int r; @@ -183,11 +184,10 @@ static int mfd_add_device(struct device *parent, int id, if (IS_ENABLED(CONFIG_OF) && parent->of_node && cell->of_compatible) { for_each_child_of_node(parent->of_node, np) { if (of_device_is_compatible(np, cell->of_compatible)) { - /* Ignore 'disabled' devices error free */ + /* Skip 'disabled' devices */ if (!of_device_is_available(np)) { - of_node_put(np); - ret = 0; - goto fail_alias; + disabled = true; + continue; }

ret = mfd_match_of_node_to_dev(pdev, np, cell); @@ -197,10 +197,17 @@ static int mfd_add_device(struct device *parent, int id, if (ret) goto fail_alias;

- break; + goto match; } }

+ if (disabled) { + /* Ignore 'disabled' devices error free */ + ret = 0; + goto fail_alias; + } + +match: if (!pdev->dev.of_node) pr_warn("%s: Failed to locate of_node [id: %d]\n", cell->name, platform_id);

After contributing the driver, add myself as the maintainer for the Lantiq PEF2256 driver.

Signed-off-by: Herve Codina herve.codina@bootlin.com Reviewed-by: Christophe Leroy christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu --- MAINTAINERS | 9 +++++++++ 1 file changed, 9 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS index 8b987f2c8633..dbc5867016bc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11876,6 +11876,15 @@ S: Maintained F: arch/mips/lantiq F: drivers/soc/lantiq

+LANTIQ PEF2256 DRIVER +M: Herve Codina herve.codina@bootlin.com +S: Maintained +F: Documentation/devicetree/bindings/net/lantiq,pef2256.yaml +F: drivers/net/wan/framer/pef2256/ +F: drivers/pinctrl/pinctrl-pef2256-regs.h +F: drivers/pinctrl/pinctrl-pef2256.c +F: include/linux/framer/pef2256.h + LASI 53c700 driver for PARISC M: "James E.J. Bottomley" James.Bottomley@HansenPartnership.com L: linux-scsi@vger.kernel.org

The framer codec interacts with a framer. It allows to use some of the framer timeslots as audio channels to transport audio data over the framer E1/T1/J1 lines. It also reports line carrier detection events through the ALSA jack detection feature.

Signed-off-by: Herve Codina herve.codina@bootlin.com Reviewed-by: Christophe Leroy christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu --- sound/soc/codecs/Kconfig | 15 ++ sound/soc/codecs/Makefile | 2 + sound/soc/codecs/framer-codec.c | 413 ++++++++++++++++++++++++++++++++ 3 files changed, 430 insertions(+) create mode 100644 sound/soc/codecs/framer-codec.c

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index f1e1dbc509f6..abb89796fd45 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -112,6 +112,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_ES8328_I2C imply SND_SOC_ES7134 imply SND_SOC_ES7241 + imply SND_SOC_FRAMER imply SND_SOC_GTM601 imply SND_SOC_HDAC_HDMI imply SND_SOC_HDAC_HDA @@ -1071,6 +1072,20 @@ config SND_SOC_ES8328_SPI depends on SPI_MASTER select SND_SOC_ES8328

+config SND_SOC_FRAMER + tristate "Framer codec" + depends on GENERIC_FRAMER + help + Enable support for the framer codec. + The framer codec uses the generic framer infrastructure to transport + some audio data over an analog E1/T1/J1 line. + This codec allows to use some of the time slots available on the TDM + bus on which the framer is connected to transport the audio data. + + To compile this driver as a module, choose M here: the module + will be called snd-soc-framer. + + config SND_SOC_GTM601 tristate 'GTM601 UMTS modem audio codec'

diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index a87e56938ce5..c6bb88cd687a 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -119,6 +119,7 @@ snd-soc-es8326-objs := es8326.o snd-soc-es8328-objs := es8328.o snd-soc-es8328-i2c-objs := es8328-i2c.o snd-soc-es8328-spi-objs := es8328-spi.o +snd-soc-framer-objs := framer-codec.o snd-soc-gtm601-objs := gtm601.o snd-soc-hdac-hdmi-objs := hdac_hdmi.o snd-soc-hdac-hda-objs := hdac_hda.o @@ -505,6 +506,7 @@ obj-$(CONFIG_SND_SOC_ES8326) += snd-soc-es8326.o obj-$(CONFIG_SND_SOC_ES8328) += snd-soc-es8328.o obj-$(CONFIG_SND_SOC_ES8328_I2C)+= snd-soc-es8328-i2c.o obj-$(CONFIG_SND_SOC_ES8328_SPI)+= snd-soc-es8328-spi.o +obj-$(CONFIG_SND_SOC_FRAMER) += snd-soc-framer.o obj-$(CONFIG_SND_SOC_GTM601) += snd-soc-gtm601.o obj-$(CONFIG_SND_SOC_HDAC_HDMI) += snd-soc-hdac-hdmi.o obj-$(CONFIG_SND_SOC_HDAC_HDA) += snd-soc-hdac-hda.o diff --git a/sound/soc/codecs/framer-codec.c b/sound/soc/codecs/framer-codec.c new file mode 100644 index 000000000000..e5fcde9ee308 --- /dev/null +++ b/sound/soc/codecs/framer-codec.c @@ -0,0 +1,413 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Framer ALSA SoC driver +// +// Copyright 2023 CS GROUP France +// +// Author: Herve Codina herve.codina@bootlin.com + +#include <linux/clk.h> +#include <linux/framer/framer.h> +#include <linux/module.h> +#include <linux/notifier.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <sound/jack.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/tlv.h> + +#define FRAMER_NB_CHANNEL 32 +#define FRAMER_JACK_MASK (SND_JACK_LINEIN | SND_JACK_LINEOUT) + +struct framer_codec { + struct framer *framer; + struct device *dev; + struct snd_soc_jack jack; + struct notifier_block nb; + struct work_struct carrier_work; + int max_chan_playback; + int max_chan_capture; +}; + +static int framer_dai_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask, + unsigned int rx_mask, int slots, int width) +{ + struct framer_codec *framer = snd_soc_component_get_drvdata(dai->component); + + switch (width) { + case 0: + /* Not set -> default 8 */ + case 8: + break; + default: + dev_err(dai->dev, "tdm slot width %d not supported\n", width); + return -EINVAL; + } + + framer->max_chan_playback = hweight32(tx_mask); + if (framer->max_chan_playback > FRAMER_NB_CHANNEL) { + dev_err(dai->dev, "too many tx slots defined (mask = 0x%x) supported max %d\n", + tx_mask, FRAMER_NB_CHANNEL); + return -EINVAL; + } + + framer->max_chan_capture = hweight32(rx_mask); + if (framer->max_chan_capture > FRAMER_NB_CHANNEL) { + dev_err(dai->dev, "too many rx slots defined (mask = 0x%x) supported max %d\n", + rx_mask, FRAMER_NB_CHANNEL); + return -EINVAL; + } + + return 0; +} + +/* + * The constraints for format/channel is to match with the number of 8bit + * time-slots available. + */ +static int framer_dai_hw_rule_channels_by_format(struct snd_soc_dai *dai, + struct snd_pcm_hw_params *params, + unsigned int nb_ts) +{ + struct snd_interval *c = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS); + snd_pcm_format_t format = params_format(params); + struct snd_interval ch = {0}; + int width; + + width = snd_pcm_format_physical_width(format); + if (width == 8 || width == 16 || width == 32 || width == 64) { + ch.max = nb_ts * 8 / width; + } else { + dev_err(dai->dev, "format physical width %d not supported\n", width); + return -EINVAL; + } + + ch.min = ch.max ? 1 : 0; + + return snd_interval_refine(c, &ch); +} + +static int framer_dai_hw_rule_playback_channels_by_format(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct snd_soc_dai *dai = rule->private; + struct framer_codec *framer = snd_soc_component_get_drvdata(dai->component); + + return framer_dai_hw_rule_channels_by_format(dai, params, framer->max_chan_playback); +} + +static int framer_dai_hw_rule_capture_channels_by_format(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct snd_soc_dai *dai = rule->private; + struct framer_codec *framer = snd_soc_component_get_drvdata(dai->component); + + return framer_dai_hw_rule_channels_by_format(dai, params, framer->max_chan_capture); +} + +static int framer_dai_hw_rule_format_by_channels(struct snd_soc_dai *dai, + struct snd_pcm_hw_params *params, + unsigned int nb_ts) +{ + struct snd_mask *f_old = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); + unsigned int channels = params_channels(params); + unsigned int slot_width; + snd_pcm_format_t format; + struct snd_mask f_new; + + if (!channels || channels > nb_ts) { + dev_err(dai->dev, "channels %u not supported\n", nb_ts); + return -EINVAL; + } + + slot_width = (nb_ts / channels) * 8; + + snd_mask_none(&f_new); + pcm_for_each_format(format) { + if (snd_mask_test_format(f_old, format)) { + if (snd_pcm_format_physical_width(format) <= slot_width) + snd_mask_set_format(&f_new, format); + } + } + + return snd_mask_refine(f_old, &f_new); +} + +static int framer_dai_hw_rule_playback_format_by_channels(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct snd_soc_dai *dai = rule->private; + struct framer_codec *framer = snd_soc_component_get_drvdata(dai->component); + + return framer_dai_hw_rule_format_by_channels(dai, params, framer->max_chan_playback); +} + +static int framer_dai_hw_rule_capture_format_by_channels(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct snd_soc_dai *dai = rule->private; + struct framer_codec *framer = snd_soc_component_get_drvdata(dai->component); + + return framer_dai_hw_rule_format_by_channels(dai, params, framer->max_chan_capture); +} + +static u64 framer_formats(u8 nb_ts) +{ + unsigned int format_width; + unsigned int chan_width; + snd_pcm_format_t format; + u64 formats_mask; + + if (!nb_ts) + return 0; + + formats_mask = 0; + chan_width = nb_ts * 8; + pcm_for_each_format(format) { + /* Support physical width multiple of 8bit */ + format_width = snd_pcm_format_physical_width(format); + if (format_width == 0 || format_width % 8) + continue; + + /* + * And support physical width that can fit N times in the + * channel + */ + if (format_width > chan_width || chan_width % format_width) + continue; + + formats_mask |= pcm_format_to_bits(format); + } + return formats_mask; +} + +static int framer_dai_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct framer_codec *framer = snd_soc_component_get_drvdata(dai->component); + snd_pcm_hw_rule_func_t hw_rule_channels_by_format; + snd_pcm_hw_rule_func_t hw_rule_format_by_channels; + unsigned int frame_bits; + u64 format; + int ret; + + if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) { + format = framer_formats(framer->max_chan_capture); + hw_rule_channels_by_format = framer_dai_hw_rule_capture_channels_by_format; + hw_rule_format_by_channels = framer_dai_hw_rule_capture_format_by_channels; + frame_bits = framer->max_chan_capture * 8; + } else { + format = framer_formats(framer->max_chan_playback); + hw_rule_channels_by_format = framer_dai_hw_rule_playback_channels_by_format; + hw_rule_format_by_channels = framer_dai_hw_rule_playback_format_by_channels; + frame_bits = framer->max_chan_playback * 8; + } + + ret = snd_pcm_hw_constraint_mask64(substream->runtime, + SNDRV_PCM_HW_PARAM_FORMAT, format); + if (ret) { + dev_err(dai->dev, "Failed to add format constraint (%d)\n", ret); + return ret; + } + + ret = snd_pcm_hw_rule_add(substream->runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, + hw_rule_channels_by_format, dai, + SNDRV_PCM_HW_PARAM_FORMAT, -1); + if (ret) { + dev_err(dai->dev, "Failed to add channels rule (%d)\n", ret); + return ret; + } + + ret = snd_pcm_hw_rule_add(substream->runtime, 0, SNDRV_PCM_HW_PARAM_FORMAT, + hw_rule_format_by_channels, dai, + SNDRV_PCM_HW_PARAM_CHANNELS, -1); + if (ret) { + dev_err(dai->dev, "Failed to add format rule (%d)\n", ret); + return ret; + } + + ret = snd_pcm_hw_constraint_single(substream->runtime, + SNDRV_PCM_HW_PARAM_FRAME_BITS, + frame_bits); + if (ret < 0) { + dev_err(dai->dev, "Failed to add frame_bits constraint (%d)\n", ret); + return ret; + } + + return 0; +} + +static u64 framer_dai_formats[] = { + SND_SOC_POSSIBLE_DAIFMT_DSP_B, +}; + +static const struct snd_soc_dai_ops framer_dai_ops = { + .startup = framer_dai_startup, + .set_tdm_slot = framer_dai_set_tdm_slot, + .auto_selectable_formats = framer_dai_formats, + .num_auto_selectable_formats = ARRAY_SIZE(framer_dai_formats), +}; + +static struct snd_soc_dai_driver framer_dai_driver = { + .name = "framer", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = FRAMER_NB_CHANNEL, + .rates = SNDRV_PCM_RATE_8000, + .formats = U64_MAX, /* Will be refined on DAI .startup() */ + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = FRAMER_NB_CHANNEL, + .rates = SNDRV_PCM_RATE_8000, + .formats = U64_MAX, /* Will be refined on DAI .startup() */ + }, + .ops = &framer_dai_ops, +}; + +static void framer_carrier_work(struct work_struct *work) +{ + struct framer_codec *framer = container_of(work, struct framer_codec, carrier_work); + struct framer_status framer_status; + int jack_status; + int ret; + + ret = framer_get_status(framer->framer, &framer_status); + if (ret) { + dev_err(framer->dev, "get framer status failed (%d)\n", ret); + return; + } + + jack_status = framer_status.link_is_on ? FRAMER_JACK_MASK : 0; + snd_soc_jack_report(&framer->jack, jack_status, FRAMER_JACK_MASK); +} + +static int framer_carrier_notifier(struct notifier_block *nb, unsigned long action, + void *data) +{ + struct framer_codec *framer = container_of(nb, struct framer_codec, nb); + + switch (action) { + case FRAMER_EVENT_STATUS: + queue_work(system_power_efficient_wq, &framer->carrier_work); + break; + default: + return NOTIFY_DONE; + } + + return NOTIFY_OK; +} + +static int framer_component_probe(struct snd_soc_component *component) +{ + struct framer_codec *framer = snd_soc_component_get_drvdata(component); + struct framer_status status; + char *name; + int ret; + + INIT_WORK(&framer->carrier_work, framer_carrier_work); + + name = "carrier"; + if (component->name_prefix) { + name = kasprintf(GFP_KERNEL, "%s carrier", component->name_prefix); + if (!name) + return -ENOMEM; + } + + ret = snd_soc_card_jack_new(component->card, name, FRAMER_JACK_MASK, &framer->jack); + if (component->name_prefix) + kfree(name); /* A copy is done by snd_soc_card_jack_new */ + if (ret) { + dev_err(component->dev, "Cannot create jack\n"); + return ret; + } + + ret = framer_init(framer->framer); + if (ret) { + dev_err(component->dev, "framer init failed (%d)\n", ret); + return ret; + } + + ret = framer_power_on(framer->framer); + if (ret) { + dev_err(component->dev, "framer power-on failed (%d)\n", ret); + goto framer_exit; + } + + /* Be sure that get_status is supported */ + ret = framer_get_status(framer->framer, &status); + if (ret) { + dev_err(component->dev, "get framer status failed (%d)\n", ret); + goto framer_power_off; + } + + framer->nb.notifier_call = framer_carrier_notifier; + ret = framer_notifier_register(framer->framer, &framer->nb); + if (ret) { + dev_err(component->dev, "Cannot register event notifier\n"); + goto framer_power_off; + } + + /* Queue work to set the initial value */ + queue_work(system_power_efficient_wq, &framer->carrier_work); + + return 0; + +framer_power_off: + framer_power_off(framer->framer); +framer_exit: + framer_exit(framer->framer); + return ret; +} + +static void framer_component_remove(struct snd_soc_component *component) +{ + struct framer_codec *framer = snd_soc_component_get_drvdata(component); + + framer_notifier_unregister(framer->framer, &framer->nb); + cancel_work_sync(&framer->carrier_work); + framer_power_off(framer->framer); + framer_exit(framer->framer); +} + +static const struct snd_soc_component_driver framer_component_driver = { + .probe = framer_component_probe, + .remove = framer_component_remove, + .endianness = 1, +}; + +static int framer_codec_probe(struct platform_device *pdev) +{ + struct framer_codec *framer; + + framer = devm_kzalloc(&pdev->dev, sizeof(*framer), GFP_KERNEL); + if (!framer) + return -ENOMEM; + + framer->dev = &pdev->dev; + + /* Get framer from parents node */ + framer->framer = devm_framer_get(&pdev->dev, NULL); + if (IS_ERR(framer->framer)) + return dev_err_probe(&pdev->dev, PTR_ERR(framer->framer), "get framer failed\n"); + + platform_set_drvdata(pdev, framer); + + return devm_snd_soc_register_component(&pdev->dev, &framer_component_driver, + &framer_dai_driver, 1); +} + +static struct platform_driver framer_codec_driver = { + .driver = { + .name = "framer-codec", + }, + .probe = framer_codec_probe, +}; +module_platform_driver(framer_codec_driver); + +MODULE_AUTHOR("Herve Codina herve.codina@bootlin.com"); +MODULE_DESCRIPTION("FRAMER ALSA SoC driver"); +MODULE_LICENSE("GPL");