[PATCH v3 1/3] ASoC: wm8940: Remove warning when no plat data present

The lack of platform data in the contemporary Linux shall not be the reason to display warnings to the kernel logs.
Signed-off-by: Lukasz Majewski lukma@denx.de Acked-by: Charles Keepax ckeepax@opensource.cirrus.com
--- Changes for v2: - None Changes for v3: - None --- sound/soc/codecs/wm8940.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c index 8dac9fd88547..0b59020d747f 100644 --- a/sound/soc/codecs/wm8940.c +++ b/sound/soc/codecs/wm8940.c @@ -709,9 +709,7 @@ static int wm8940_probe(struct snd_soc_component *component) if (ret < 0) return ret;
- if (!pdata) - dev_warn(component->dev, "No platform data supplied\n"); - else { + if (pdata) { reg = snd_soc_component_read(component, WM8940_OUTPUTCTL); ret = snd_soc_component_write(component, WM8940_OUTPUTCTL, reg | pdata->vroi); if (ret < 0)

This patch enables support for internal wm8940's PLL and proper divider to set proper value for 256x fs clock.
This approach is more flexible and replaces hardcoded clock values and makes the codec work with the simple-card driver. Card drivers calling set_pll() and set_clkdiv() directly are unaffected.
For the reference - code in this commit is based on: 51b2bb3f2568e6d9d81a001d38b8d70c2ba4af99 ("ASoC: wm8974: configure pll and mclk divider automatically")
Signed-off-by: Lukasz Majewski lukma@denx.de Acked-by: Charles Keepax ckeepax@opensource.cirrus.com
--- Changes for v2: - Remove not required line add/remove - Rewrite the commit message to describe more precisely the problem Changes for v3: - Rewrite commit message with proper refernce format for patch - Add Acked-by tag --- sound/soc/codecs/wm8940.c | 101 +++++++++++++++++++++++++++++++------- 1 file changed, 82 insertions(+), 19 deletions(-)
diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c index 0b59020d747f..1b02d5e8a007 100644 --- a/sound/soc/codecs/wm8940.c +++ b/sound/soc/codecs/wm8940.c @@ -37,7 +37,9 @@ #include "wm8940.h"
struct wm8940_priv { - unsigned int sysclk; + unsigned int mclk; + unsigned int fs; + struct regmap *regmap; };
@@ -387,17 +389,24 @@ static int wm8940_set_dai_fmt(struct snd_soc_dai *codec_dai, return 0; }
+static int wm8940_update_clocks(struct snd_soc_dai *dai); static int wm8940_i2s_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { struct snd_soc_component *component = dai->component; + struct wm8940_priv *priv = snd_soc_component_get_drvdata(component); u16 iface = snd_soc_component_read(component, WM8940_IFACE) & 0xFD9F; u16 addcntrl = snd_soc_component_read(component, WM8940_ADDCNTRL) & 0xFFF1; u16 companding = snd_soc_component_read(component, WM8940_COMPANDINGCTL) & 0xFFDF; int ret;
+ priv->fs = params_rate(params); + ret = wm8940_update_clocks(dai); + if (ret) + return ret; + /* LoutR control */ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE && params_channels(params) == 2) @@ -611,24 +620,6 @@ static int wm8940_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, return 0; }
-static int wm8940_set_dai_sysclk(struct snd_soc_dai *codec_dai, - int clk_id, unsigned int freq, int dir) -{ - struct snd_soc_component *component = codec_dai->component; - struct wm8940_priv *wm8940 = snd_soc_component_get_drvdata(component); - - switch (freq) { - case 11289600: - case 12000000: - case 12288000: - case 16934400: - case 18432000: - wm8940->sysclk = freq; - return 0; - } - return -EINVAL; -} - static int wm8940_set_dai_clkdiv(struct snd_soc_dai *codec_dai, int div_id, int div) { @@ -653,6 +644,78 @@ static int wm8940_set_dai_clkdiv(struct snd_soc_dai *codec_dai, return ret; }
+static unsigned int wm8940_get_mclkdiv(unsigned int f_in, unsigned int f_out, + int *mclkdiv) +{ + unsigned int ratio = 2 * f_in / f_out; + + if (ratio <= 2) { + *mclkdiv = WM8940_MCLKDIV_1; + ratio = 2; + } else if (ratio == 3) { + *mclkdiv = WM8940_MCLKDIV_1_5; + } else if (ratio == 4) { + *mclkdiv = WM8940_MCLKDIV_2; + } else if (ratio <= 6) { + *mclkdiv = WM8940_MCLKDIV_3; + ratio = 6; + } else if (ratio <= 8) { + *mclkdiv = WM8940_MCLKDIV_4; + ratio = 8; + } else if (ratio <= 12) { + *mclkdiv = WM8940_MCLKDIV_6; + ratio = 12; + } else if (ratio <= 16) { + *mclkdiv = WM8940_MCLKDIV_8; + ratio = 16; + } else { + *mclkdiv = WM8940_MCLKDIV_12; + ratio = 24; + } + + return f_out * ratio / 2; +} + +static int wm8940_update_clocks(struct snd_soc_dai *dai) +{ + struct snd_soc_component *codec = dai->component; + struct wm8940_priv *priv = snd_soc_component_get_drvdata(codec); + unsigned int fs256; + unsigned int fpll = 0; + unsigned int f; + int mclkdiv; + + if (!priv->mclk || !priv->fs) + return 0; + + fs256 = 256 * priv->fs; + + f = wm8940_get_mclkdiv(priv->mclk, fs256, &mclkdiv); + if (f != priv->mclk) { + /* The PLL performs best around 90MHz */ + fpll = wm8940_get_mclkdiv(22500000, fs256, &mclkdiv); + } + + wm8940_set_dai_pll(dai, 0, 0, priv->mclk, fpll); + wm8940_set_dai_clkdiv(dai, WM8940_MCLKDIV, mclkdiv); + + return 0; +} + +static int wm8940_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, + unsigned int freq, int dir) +{ + struct snd_soc_component *codec = dai->component; + struct wm8940_priv *priv = snd_soc_component_get_drvdata(codec); + + if (dir != SND_SOC_CLOCK_IN) + return -EINVAL; + + priv->mclk = freq; + + return wm8940_update_clocks(dai); +} + #define WM8940_RATES SNDRV_PCM_RATE_8000_48000
#define WM8940_FORMATS (SNDRV_PCM_FMTBIT_S8 | \

The wm8940 provides the chip ID information via I2C. In this patch this information is read and if not matching expected value, the probe function is aborted.
This prevents from using (i.e. inserting) other wm89* modules which use the same I2C bus address.
Signed-off-by: Lukasz Majewski lukma@denx.de Acked-by: Charles Keepax ckeepax@opensource.cirrus.com --- Changes for v2: - None Changes for v3: - None --- sound/soc/codecs/wm8940.c | 11 +++++++++++ sound/soc/codecs/wm8940.h | 3 +++ 2 files changed, 14 insertions(+)
diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c index 1b02d5e8a007..8eb4782c9232 100644 --- a/sound/soc/codecs/wm8940.c +++ b/sound/soc/codecs/wm8940.c @@ -760,6 +760,17 @@ static int wm8940_probe(struct snd_soc_component *component) int ret; u16 reg;
+ /* + * Check chip ID for wm8940 - value of 0x00 offset + * SOFTWARE_RESET on write + * CHIP_ID on read + */ + reg = snd_soc_component_read(component, WM8940_SOFTRESET); + if (reg != WM8940_CHIP_ID) { + dev_err(component->dev, "Wrong wm8940 chip ID: 0x%x\n", reg); + return -ENODEV; + } + ret = wm8940_reset(component); if (ret < 0) { dev_err(component->dev, "Failed to issue reset\n"); diff --git a/sound/soc/codecs/wm8940.h b/sound/soc/codecs/wm8940.h index 0d4f53ada2e6..86bbf902ef5a 100644 --- a/sound/soc/codecs/wm8940.h +++ b/sound/soc/codecs/wm8940.h @@ -95,5 +95,8 @@ struct wm8940_setup_data { #define WM8940_OPCLKDIV_3 2 #define WM8940_OPCLKDIV_4 3
+/* Chip ID */ +#define WM8940_CHIP_ID 0x8940 + #endif /* _WM8940_H */

On Fri, 16 Dec 2022 10:46:22 +0100, Lukasz Majewski wrote:
The lack of platform data in the contemporary Linux shall not be the reason to display warnings to the kernel logs.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/3] ASoC: wm8940: Remove warning when no plat data present commit: 5dc5e76b4c41fc8cdd9ed77653b2ce453974fb30 [2/3] ASoC: wm8940: Rewrite code to set proper clocks commit: 294833fc9eb4e9d6c69f8d158cd991d641e59908 [3/3] ASoC: wm8940: Read chip ID when wm8940 codec probing commit: a5c26ee572d94337baf9c944b7b4881a2db62d37
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
participants (2)
-
Lukasz Majewski
-
Mark Brown