[alsa-devel] [PATCH] ASoC: nau8825: add crosstalk suppression feature
Add crosstalk signal suppression function.
Signed-off-by: John Hsu KCHSU0@nuvoton.com --- sound/soc/codecs/nau8825.c | 403 +++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/nau8825.h | 77 ++++++++- 2 files changed, 479 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index d270f63..81554be 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -82,6 +82,380 @@ static const struct nau8825_fll_attr fll_pre_scalar[] = { { 8, 0x3 }, };
+/* Crosstalk detection */ +#define LOG10_MAGIC 646456993 +#define GAIN_AUGMENT 22500 +#define SIDETONE_BASE 207000 + +static struct reg_default nau8825_xtalk_baktab[] = { + { NAU8825_REG_FLL6, 0 }, + { NAU8825_REG_CLK_DIVIDER, 0 }, + { NAU8825_REG_ADC_DGAIN_CTRL, 0 }, + { NAU8825_REG_HSVOL_CTRL, 0 }, + { NAU8825_REG_DACL_CTRL, 0 }, + { NAU8825_REG_DACR_CTRL, 0 }, + { NAU8825_REG_CLASSG_CTRL, 0 }, +}; + +static const struct reg_default nau8825_biq_reg[] = { + { NAU8825_REG_BIQ_CTRL, 0x0000 }, + { NAU8825_REG_BIQ_COF1, 0x009B }, + { NAU8825_REG_BIQ_COF2, 0x0006 }, + { NAU8825_REG_BIQ_COF3, 0xff66 }, + { NAU8825_REG_BIQ_COF4, 0x0000 }, + { NAU8825_REG_BIQ_COF5, 0xffb3 }, + { NAU8825_REG_BIQ_COF6, 0x0000 }, + { NAU8825_REG_BIQ_COF7, 0x009A }, + { NAU8825_REG_BIQ_COF8, 0x0006 }, + { NAU8825_REG_BIQ_COF9, 0xffb3 }, + { NAU8825_REG_BIQ_COF10, 0x8000 }, + { NAU8825_REG_BIQ_CTRL, 0x0010 }, +}; + +static const unsigned short logtable[256] = { + 0x0000, 0x0171, 0x02e0, 0x044e, 0x05ba, 0x0725, 0x088e, 0x09f7, + 0x0b5d, 0x0cc3, 0x0e27, 0x0f8a, 0x10eb, 0x124b, 0x13aa, 0x1508, + 0x1664, 0x17bf, 0x1919, 0x1a71, 0x1bc8, 0x1d1e, 0x1e73, 0x1fc6, + 0x2119, 0x226a, 0x23ba, 0x2508, 0x2656, 0x27a2, 0x28ed, 0x2a37, + 0x2b80, 0x2cc8, 0x2e0f, 0x2f54, 0x3098, 0x31dc, 0x331e, 0x345f, + 0x359f, 0x36de, 0x381b, 0x3958, 0x3a94, 0x3bce, 0x3d08, 0x3e41, + 0x3f78, 0x40af, 0x41e4, 0x4319, 0x444c, 0x457f, 0x46b0, 0x47e1, + 0x4910, 0x4a3f, 0x4b6c, 0x4c99, 0x4dc5, 0x4eef, 0x5019, 0x5142, + 0x526a, 0x5391, 0x54b7, 0x55dc, 0x5700, 0x5824, 0x5946, 0x5a68, + 0x5b89, 0x5ca8, 0x5dc7, 0x5ee5, 0x6003, 0x611f, 0x623a, 0x6355, + 0x646f, 0x6588, 0x66a0, 0x67b7, 0x68ce, 0x69e4, 0x6af8, 0x6c0c, + 0x6d20, 0x6e32, 0x6f44, 0x7055, 0x7165, 0x7274, 0x7383, 0x7490, + 0x759d, 0x76aa, 0x77b5, 0x78c0, 0x79ca, 0x7ad3, 0x7bdb, 0x7ce3, + 0x7dea, 0x7ef0, 0x7ff6, 0x80fb, 0x81ff, 0x8302, 0x8405, 0x8507, + 0x8608, 0x8709, 0x8809, 0x8908, 0x8a06, 0x8b04, 0x8c01, 0x8cfe, + 0x8dfa, 0x8ef5, 0x8fef, 0x90e9, 0x91e2, 0x92db, 0x93d2, 0x94ca, + 0x95c0, 0x96b6, 0x97ab, 0x98a0, 0x9994, 0x9a87, 0x9b7a, 0x9c6c, + 0x9d5e, 0x9e4f, 0x9f3f, 0xa02e, 0xa11e, 0xa20c, 0xa2fa, 0xa3e7, + 0xa4d4, 0xa5c0, 0xa6ab, 0xa796, 0xa881, 0xa96a, 0xaa53, 0xab3c, + 0xac24, 0xad0c, 0xadf2, 0xaed9, 0xafbe, 0xb0a4, 0xb188, 0xb26c, + 0xb350, 0xb433, 0xb515, 0xb5f7, 0xb6d9, 0xb7ba, 0xb89a, 0xb97a, + 0xba59, 0xbb38, 0xbc16, 0xbcf4, 0xbdd1, 0xbead, 0xbf8a, 0xc065, + 0xc140, 0xc21b, 0xc2f5, 0xc3cf, 0xc4a8, 0xc580, 0xc658, 0xc730, + 0xc807, 0xc8de, 0xc9b4, 0xca8a, 0xcb5f, 0xcc34, 0xcd08, 0xcddc, + 0xceaf, 0xcf82, 0xd054, 0xd126, 0xd1f7, 0xd2c8, 0xd399, 0xd469, + 0xd538, 0xd607, 0xd6d6, 0xd7a4, 0xd872, 0xd93f, 0xda0c, 0xdad9, + 0xdba5, 0xdc70, 0xdd3b, 0xde06, 0xded0, 0xdf9a, 0xe063, 0xe12c, + 0xe1f5, 0xe2bd, 0xe385, 0xe44c, 0xe513, 0xe5d9, 0xe69f, 0xe765, + 0xe82a, 0xe8ef, 0xe9b3, 0xea77, 0xeb3b, 0xebfe, 0xecc1, 0xed83, + 0xee45, 0xef06, 0xefc8, 0xf088, 0xf149, 0xf209, 0xf2c8, 0xf387, + 0xf446, 0xf505, 0xf5c3, 0xf680, 0xf73e, 0xf7fb, 0xf8b7, 0xf973, + 0xfa2f, 0xfaea, 0xfba5, 0xfc60, 0xfd1a, 0xfdd4, 0xfe8e, 0xff47 +}; + +/** + * computes log10 of a value; the result is round off to 3 decimal. + * this function takes reference to dvb-math. + * + * @return log10(value) * 1000 + */ +static u32 nau8825_intlog10_dec3(u32 value) +{ + u32 msb, logentry, significand, interpolation, log10val; + u64 log2val; + + msb = fls(value) - 1; + significand = value << (31 - msb); + logentry = (significand >> 23) & 0xff; + interpolation = ((significand & 0x7fffff) * + ((logtable[(logentry + 1) & 0xff] - + logtable[logentry]) & 0xffff)) >> 15; + + log2val = ((msb << 24) + (logtable[logentry] << 8) + interpolation); + log10val = (log2val * LOG10_MAGIC) >> 31; + return log10val / ((1 << 24) / 1000); +} + +/** + * computes cross-talk sidetone with orignal and cross-talk signal + * + * @sig_org: orignal signal + * @sig_cros: cross-talk signal + * + * return cross-talk sidetone + */ +static u32 nau8825_xtalk_sidetone(u32 sig_org, u32 sig_cros) +{ + u32 gain, sidetone; + + if (unlikely(sig_org == 0) || unlikely(sig_cros == 0)) { + WARN_ON(1); + return 0; + } + + sig_org = nau8825_intlog10_dec3(sig_org); + sig_cros = nau8825_intlog10_dec3(sig_cros); + gain = (sig_org - sig_cros) * 20 + GAIN_AUGMENT; + sidetone = SIDETONE_BASE - gain * 2; + sidetone /= 1000; + + return sidetone; +} + +static void nau8825_xtalk_backup(struct nau8825 *nau8825) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(nau8825_xtalk_baktab); i++) + regmap_read(nau8825->regmap, nau8825_xtalk_baktab[i].reg, + &nau8825_xtalk_baktab[i].def); +} + +static void nau8825_xtalk_restore(struct nau8825 *nau8825) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(nau8825_xtalk_baktab); i++) + regmap_write(nau8825->regmap, nau8825_xtalk_baktab[i].reg, + nau8825_xtalk_baktab[i].def); +} + +static void nau8825_xtalk_biq_apply(struct nau8825 *nau8825) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(nau8825_biq_reg); i++) + regmap_write(nau8825->regmap, nau8825_biq_reg[i].reg, + nau8825_biq_reg[i].def); +} + +static void nau8825_xtalk_biq_cancel(struct nau8825 *nau8825) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(nau8825_biq_reg); i++) + regmap_write(nau8825->regmap, nau8825_biq_reg[i].reg, 0); +} + +static void nau8825_xtalk_prepare_dac(struct nau8825 *nau8825) +{ + regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, + NAU8825_BIAS_TESTDAC_EN, NAU8825_BIAS_TESTDACL_EN); + regmap_update_bits(nau8825->regmap, NAU8825_REG_BOOST, + NAU8825_HP_BOOST_DIS, NAU8825_HP_BOOST_DIS); + regmap_update_bits(nau8825->regmap, NAU8825_REG_HSD_CTRL, + NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L, + NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L); + regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL, + NAU8825_ENABLE_DACR | NAU8825_ENABLE_DACL | + NAU8825_ENABLE_ADC | NAU8825_ENABLE_ADC_CLK | + NAU8825_ENABLE_DAC_CLK, NAU8825_ENABLE_DACR | + NAU8825_ENABLE_DACL | NAU8825_ENABLE_ADC | + NAU8825_ENABLE_ADC_CLK | NAU8825_ENABLE_DAC_CLK); + regmap_update_bits(nau8825->regmap, NAU8825_REG_CLASSG_CTRL, + NAU8825_CLASSG_LDAC_EN | NAU8825_CLASSG_RDAC_EN, + NAU8825_CLASSG_LDAC_EN | NAU8825_CLASSG_RDAC_EN); + regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_JAMNODCLOW | NAU8825_CHANRGE_PUMP_EN, + NAU8825_JAMNODCLOW | NAU8825_CHANRGE_PUMP_EN); + regmap_update_bits(nau8825->regmap, NAU8825_REG_RDAC, + NAU8825_RDAC_EN | NAU8825_RDAC_CLK_EN, + NAU8825_RDAC_EN | NAU8825_RDAC_CLK_EN); + regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL, + NAU8825_POWERUP_INTEGR_R | NAU8825_POWERUP_INTEGR_L | + NAU8825_POWERUP_DRV_IN_R | NAU8825_POWERUP_DRV_IN_L | + NAU8825_POWERUP_HP_DRV_R | NAU8825_POWERUP_HP_DRV_L, + NAU8825_POWERUP_INTEGR_R | NAU8825_POWERUP_INTEGR_L | + NAU8825_POWERUP_DRV_IN_R | NAU8825_POWERUP_DRV_IN_L | + NAU8825_POWERUP_HP_DRV_R | NAU8825_POWERUP_HP_DRV_L); + regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, 0); + regmap_update_bits(nau8825->regmap, NAU8825_REG_HSD_CTRL, + NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L, 0); +} + +static void nau8825_xtalk_prepare_adc(struct nau8825 *nau8825) +{ + regmap_update_bits(nau8825->regmap, NAU8825_REG_ANALOG_ADC_2, + NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_MASK, + NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_VMID_PLUS_0_5DB); +} + +static void nau8825_xtalk_clock(struct nau8825 *nau8825) +{ + regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL6, + NAU8825_DCO_EN, NAU8825_DCO_EN); + regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER, + NAU8825_CLK_SRC_MASK | NAU8825_CLK_MCLK_SRC_MASK, + NAU8825_CLK_SRC_VCO | 0x3); +} + +static void nau8825_xtalk_prepare(struct nau8825 *nau8825) +{ + /* backup value of specific register used by cross-talk */ + nau8825_xtalk_backup(nau8825); + nau8825_xtalk_clock(nau8825); + nau8825_xtalk_prepare_dac(nau8825); + nau8825_xtalk_prepare_adc(nau8825); + /* Config channel */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_DACL_CTRL, + NAU8825_DACL_CH_SEL_MASK, NAU8825_DACL_CH_SEL_L); + regmap_update_bits(nau8825->regmap, NAU8825_REG_DACR_CTRL, + NAU8825_DACR_CH_SEL_MASK, NAU8825_DACR_CH_SEL_R); + /* Config headphone volume */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_HSVOL_CTRL, + NAU8825_HPL_VOL_MASK | NAU8825_HPR_VOL_MASK, 0x0492); + /* Config IIS parameter */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, + NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_MASTER); + regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, + NAU8825_I2S_DRV_MASK | NAU8825_I2S_BLK_DIV_MASK, + (0x2 << NAU8825_I2S_DRV_SFT) | 0x1); + /* Config crosstalk */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_IMM_MODE_CTRL, + NAU8825_IMM_THD_MASK | NAU8825_IMM_CYC_MASK | + NAU8825_IMM_DAC_SRC_MASK, (0x2 << NAU8825_IMM_THD_SFT) | + NAU8825_IMM_CYC_8192 | NAU8825_IMM_DAC_SRC_SIN); + regmap_update_bits(nau8825->regmap, + NAU8825_REG_INTERRUPT_MASK, NAU8825_IRQ_RMS_EN, 0); + nau8825_xtalk_biq_apply(nau8825); +} + +static void nau8825_xtalk_clean_dac(struct nau8825 *nau8825) +{ + regmap_update_bits(nau8825->regmap, NAU8825_REG_BOOST, + NAU8825_HP_BOOST_DIS, NAU8825_HP_BOOST_DIS); + regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL | + NAU8825_JAMNODCLOW); + regmap_update_bits(nau8825->regmap, NAU8825_REG_HSD_CTRL, + NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L, + NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L); + regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL, + NAU8825_POWERUP_HP_DRV_R | NAU8825_POWERUP_HP_DRV_L, 0); + regmap_update_bits(nau8825->regmap, NAU8825_REG_CLASSG_CTRL, + NAU8825_CLASSG_LDAC_EN | NAU8825_CLASSG_RDAC_EN, 0); + regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_CHANRGE_PUMP_EN, 0); + regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, + NAU8825_BIAS_HPR_IMP | NAU8825_BIAS_HPL_IMP | + NAU8825_BIAS_TESTDAC_EN, 0); + regmap_update_bits(nau8825->regmap, NAU8825_REG_BOOST, + NAU8825_HP_BOOST_DIS, 0); + regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL, + NAU8825_ENABLE_DACL | NAU8825_ENABLE_ADC | + NAU8825_ENABLE_ADC_CLK | NAU8825_ENABLE_DAC_CLK, 0); + if (!nau8825->irq) + regmap_update_bits(nau8825->regmap, + NAU8825_REG_ENA_CTRL, NAU8825_ENABLE_DACR, 0); + regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL, + NAU8825_POWERUP_INTEGR_R | NAU8825_POWERUP_INTEGR_L | + NAU8825_POWERUP_DRV_IN_R | NAU8825_POWERUP_DRV_IN_L, 0); + regmap_update_bits(nau8825->regmap, NAU8825_REG_RDAC, + NAU8825_RDAC_EN | NAU8825_RDAC_CLK_EN, 0); +} + +static void nau8825_xtalk_clean_adc(struct nau8825 *nau8825) +{ + regmap_update_bits(nau8825->regmap, NAU8825_REG_ANALOG_ADC_2, + NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_MASK, 0); +} + +static void nau8825_xtalk_clean(struct nau8825 *nau8825) +{ + /* restore value of specific register for cross-talk */ + nau8825_xtalk_restore(nau8825); + nau8825_xtalk_clean_dac(nau8825); + nau8825_xtalk_clean_adc(nau8825); + regmap_write(nau8825->regmap, NAU8825_REG_IMM_MODE_CTRL, 0); + regmap_update_bits(nau8825->regmap, NAU8825_REG_INTERRUPT_MASK, + NAU8825_IRQ_RMS_EN, NAU8825_IRQ_RMS_EN); + regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, + NAU8825_I2S_MS_MASK | NAU8825_I2S_DRV_MASK | + NAU8825_I2S_BLK_DIV_MASK, NAU8825_I2S_MS_MASTER); + regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, + NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_SLAVE); + nau8825_xtalk_biq_cancel(nau8825); +} + +static void nau8825_xtalk_imm_start(struct nau8825 *nau8825, int vol) +{ + regmap_update_bits(nau8825->regmap, NAU8825_REG_ADC_DGAIN_CTRL, + NAU8825_ADC_DIG_VOL_MASK, vol); + switch (nau8825->xtalk_state) { + case NAU8825_XTALK_HPR_R2L: + regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, + NAU8825_BIAS_HPR_IMP | NAU8825_BIAS_HPL_IMP, + NAU8825_BIAS_HPR_IMP); + break; + case NAU8825_XTALK_HPL_R2L: + regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, + NAU8825_BIAS_HPR_IMP | NAU8825_BIAS_HPL_IMP, + NAU8825_BIAS_HPL_IMP); + break; + default: + break; + } + msleep(100); + regmap_update_bits(nau8825->regmap, NAU8825_REG_IMM_MODE_CTRL, + NAU8825_IMM_EN, NAU8825_IMM_EN); +} + +static void nau8825_xtalk_imm_stop(struct nau8825 *nau8825) +{ + regmap_update_bits(nau8825->regmap, + NAU8825_REG_IMM_MODE_CTRL, NAU8825_IMM_EN, 0); +} + +static void nau8825_xtalk_measure(struct nau8825 *nau8825) +{ + u32 sidetone; + + switch (nau8825->xtalk_state) { + case NAU8825_XTALK_DONE: + nau8825_xtalk_prepare(nau8825); + nau8825->xtalk_state = NAU8825_XTALK_HPR_R2L; + msleep(280); + nau8825_xtalk_imm_start(nau8825, 0x00d2); + break; + case NAU8825_XTALK_HPR_R2L: + regmap_read(nau8825->regmap, NAU8825_REG_IMM_RMS_L, + &nau8825->imp_rms[NAU8825_XTALK_HPR_R2L]); + dev_dbg(nau8825->dev, "HPR_R2L imm: %x\n", + nau8825->imp_rms[NAU8825_XTALK_HPR_R2L]); + nau8825_xtalk_imm_stop(nau8825); + nau8825->xtalk_state = NAU8825_XTALK_HPL_R2L; + nau8825_xtalk_imm_start(nau8825, 0x00ff); + break; + case NAU8825_XTALK_HPL_R2L: + regmap_read(nau8825->regmap, NAU8825_REG_IMM_RMS_L, + &nau8825->imp_rms[NAU8825_XTALK_HPL_R2L]); + dev_dbg(nau8825->dev, "HPL_R2L imm: %x\n", + nau8825->imp_rms[NAU8825_XTALK_HPL_R2L]); + nau8825_xtalk_imm_stop(nau8825); + nau8825->xtalk_state = NAU8825_XTALK_IMM; + break; + case NAU8825_XTALK_IMM: + sidetone = nau8825_xtalk_sidetone( + nau8825->imp_rms[NAU8825_XTALK_HPR_R2L], + nau8825->imp_rms[NAU8825_XTALK_HPL_R2L]); + dev_dbg(nau8825->dev, "cross-talk sidetone: %x\n", sidetone); + regmap_write(nau8825->regmap, NAU8825_REG_DAC_DGAIN_CTRL, + (sidetone << 8) | sidetone); + nau8825_xtalk_clean(nau8825); + nau8825->xtalk_state = NAU8825_XTALK_DONE; + break; + default: + break; + } +} + +static void nau8825_xtalk_work(struct work_struct *work) +{ + struct nau8825 *nau8825 = container_of( + work, struct nau8825, xtalk_work); + + nau8825_xtalk_measure(nau8825); + if (nau8825->xtalk_state == NAU8825_XTALK_IMM) + nau8825_xtalk_measure(nau8825); +} + + static const struct reg_default nau8825_reg_defaults[] = { { NAU8825_REG_ENA_CTRL, 0x00ff }, { NAU8825_REG_IIC_ADDR_SET, 0x0 }, @@ -211,6 +585,7 @@ static bool nau8825_volatile_reg(struct device *dev, unsigned int reg) case NAU8825_REG_RESET: case NAU8825_REG_IRQ_STATUS: case NAU8825_REG_INT_CLR_KEY_STATUS: + case NAU8825_REG_BIQ_CTRL ... NAU8825_REG_BIQ_COF10: case NAU8825_REG_IMM_RMS_L: case NAU8825_REG_IMM_RMS_R: case NAU8825_REG_I2C_DEVICE_ID: @@ -741,6 +1116,10 @@ static int nau8825_jack_insert(struct nau8825 *nau8825)
regmap_read(regmap, NAU8825_REG_GENERAL_STATUS, &jack_status_reg); mic_detected = (jack_status_reg >> 10) & 3; + if (mic_detected == 0x3) + nau8825->high_imped = 1; + else + nau8825->high_imped = 0;
switch (mic_detected) { case 0: @@ -836,6 +1215,10 @@ static irqreturn_t nau8825_interrupt(int irq, void *data) } else if (active_irq & NAU8825_HEADSET_COMPLETION_IRQ) { if (nau8825_is_jack_inserted(regmap)) { event |= nau8825_jack_insert(nau8825); + if (!nau8825->high_imped) { + nau8825->xtalk_state = NAU8825_XTALK_DONE; + schedule_work(&nau8825->xtalk_work); + } } else { dev_warn(nau8825->dev, "Headset completion IRQ fired but no headset connected\n"); nau8825_eject_jack(nau8825); @@ -843,6 +1226,9 @@ static irqreturn_t nau8825_interrupt(int irq, void *data)
event_mask |= SND_JACK_HEADSET; clear_irq = NAU8825_HEADSET_COMPLETION_IRQ; + } else if (active_irq & NAU8825_IMPEDANCE_MEAS_IRQ) { + schedule_work(&nau8825->xtalk_work); + clear_irq = NAU8825_IMPEDANCE_MEAS_IRQ; }
if (!clear_irq) @@ -901,6 +1287,11 @@ static void nau8825_init_regs(struct nau8825 *nau8825)
/* Latch IIC LSB value */ regmap_write(regmap, NAU8825_REG_IIC_ADDR_SET, 0x0001); + /* Config channel */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_DACL_CTRL, + NAU8825_DACL_CH_SEL_MASK, NAU8825_DACL_CH_SEL_L); + regmap_update_bits(nau8825->regmap, NAU8825_REG_DACR_CTRL, + NAU8825_DACR_CH_SEL_MASK, NAU8825_DACR_CH_SEL_R); /* Enable Bias/Vmid */ regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, NAU8825_BIAS_VMID, NAU8825_BIAS_VMID); @@ -1007,6 +1398,17 @@ static int nau8825_codec_probe(struct snd_soc_codec *codec) regmap_write(nau8825->regmap, NAU8825_REG_INTERRUPT_DIS_CTRL, 0); nau8825_restart_jack_detection(nau8825->regmap);
+ INIT_WORK(&nau8825->xtalk_work, nau8825_xtalk_work); + + return 0; +} + +static int nau8825_codec_remove(struct snd_soc_codec *codec) +{ + struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); + + cancel_work_sync(&nau8825->xtalk_work); + return 0; }
@@ -1326,6 +1728,7 @@ static int nau8825_set_bias_level(struct snd_soc_codec *codec,
static struct snd_soc_codec_driver nau8825_codec_driver = { .probe = nau8825_codec_probe, + .remove = nau8825_codec_remove, .set_sysclk = nau8825_set_sysclk, .set_pll = nau8825_set_pll, .set_bias_level = nau8825_set_bias_level, diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h index 029134a..808474d 100644 --- a/sound/soc/codecs/nau8825.h +++ b/sound/soc/codecs/nau8825.h @@ -98,7 +98,13 @@ #define NAU8825_ENABLE_DACR_SFT 10 #define NAU8825_ENABLE_DACR (1 << NAU8825_ENABLE_DACR_SFT) #define NAU8825_ENABLE_DACL_SFT 9 +#define NAU8825_ENABLE_DACL (1 << NAU8825_ENABLE_DACL_SFT) #define NAU8825_ENABLE_ADC_SFT 8 +#define NAU8825_ENABLE_ADC (1 << NAU8825_ENABLE_ADC_SFT) +#define NAU8825_ENABLE_ADC_CLK_SFT 7 +#define NAU8825_ENABLE_ADC_CLK (1 << NAU8825_ENABLE_ADC_CLK_SFT) +#define NAU8825_ENABLE_DAC_CLK_SFT 6 +#define NAU8825_ENABLE_DAC_CLK (1 << NAU8825_ENABLE_DAC_CLK_SFT) #define NAU8825_ENABLE_SAR_SFT 1
/* CLK_DIVIDER (0x3) */ @@ -153,6 +159,7 @@ /* INTERRUPT_MASK (0xf) */ #define NAU8825_IRQ_OUTPUT_EN (1 << 11) #define NAU8825_IRQ_HEADSET_COMPLETE_EN (1 << 10) +#define NAU8825_IRQ_RMS_EN (1 << 8) #define NAU8825_IRQ_KEY_RELEASE_EN (1 << 7) #define NAU8825_IRQ_KEY_SHORT_PRESS_EN (1 << 5) #define NAU8825_IRQ_EJECT_EN (1 << 2) @@ -225,10 +232,13 @@
/* I2S_PCM_CTRL2 (0x1d) */ #define NAU8825_I2S_TRISTATE (1 << 15) /* 0 - normal mode, 1 - Hi-Z output */ +#define NAU8825_I2S_DRV_SFT 12 +#define NAU8825_I2S_DRV_MASK (0x3 << NAU8825_I2S_DRV_SFT) #define NAU8825_I2S_MS_SFT 3 #define NAU8825_I2S_MS_MASK (1 << NAU8825_I2S_MS_SFT) #define NAU8825_I2S_MS_MASTER (1 << NAU8825_I2S_MS_SFT) #define NAU8825_I2S_MS_SLAVE (0 << NAU8825_I2S_MS_SFT) +#define NAU8825_I2S_BLK_DIV_MASK 0x7
/* ADC_RATE (0x2b) */ #define NAU8825_ADC_SYNC_DOWN_SFT 0 @@ -247,22 +257,66 @@ #define NAU8825_DAC_OVERSAMPLE_128 2 #define NAU8825_DAC_OVERSAMPLE_32 4
+/* ADC_DGAIN_CTRL (0x30) */ +#define NAU8825_ADC_DAC_ST1_SFT 12 +#define NAU8825_ADC_DAC_ST1_MASK 0xf +#define NAU8825_ADC_DAC_ST2_SFT 8 +#define NAU8825_ADC_DAC_ST2_MASK 0xf +#define NAU8825_ADC_DIG_VOL_MASK 0xff + /* MUTE_CTRL (0x31) */ #define NAU8825_DAC_ZERO_CROSSING_EN (1 << 9) #define NAU8825_DAC_SOFT_MUTE (1 << 9)
/* HSVOL_CTRL (0x32) */ #define NAU8825_HP_MUTE (1 << 15) +#define NAU8825_HP_MUTE_AUTO (1 << 14) +#define NAU8825_HPL_MUTE (1 << 13) +#define NAU8825_HPR_MUTE (1 << 12) +#define NAU8825_HPL_VOL_SFT 6 +#define NAU8825_HPL_VOL_MASK (0x3f << NAU8825_HPL_VOL_SFT) +#define NAU8825_HPR_VOL_SFT 0 +#define NAU8825_HPR_VOL_MASK (0x3f << NAU8825_HPR_VOL_SFT)
/* DACL_CTRL (0x33) */ #define NAU8825_DACL_CH_SEL_SFT 9 +#define NAU8825_DACL_CH_SEL_MASK (0x1 << NAU8825_DACL_CH_SEL_SFT) +#define NAU8825_DACL_CH_SEL_L (0x0 << NAU8825_DACL_CH_SEL_SFT) +#define NAU8825_DACL_CH_SEL_R (0x1 << NAU8825_DACL_CH_SEL_SFT)
/* DACR_CTRL (0x34) */ #define NAU8825_DACR_CH_SEL_SFT 9 +#define NAU8825_DACR_CH_SEL_MASK (0x1 << NAU8825_DACR_CH_SEL_SFT) +#define NAU8825_DACR_CH_SEL_L (0x0 << NAU8825_DACR_CH_SEL_SFT) +#define NAU8825_DACR_CH_SEL_R (0x1 << NAU8825_DACR_CH_SEL_SFT) + +/* IMM_MODE_CTRL (0x4C) */ +#define NAU8825_IMM_THD_SFT 8 +#define NAU8825_IMM_THD_MASK (0x3f << NAU8825_IMM_THD_SFT) +#define NAU8825_IMM_CYC_SFT 4 +#define NAU8825_IMM_CYC_MASK (0x3 << NAU8825_IMM_CYC_SFT) +#define NAU8825_IMM_CYC_1024 (0x0 << NAU8825_IMM_CYC_SFT) +#define NAU8825_IMM_CYC_2048 (0x1 << NAU8825_IMM_CYC_SFT) +#define NAU8825_IMM_CYC_4096 (0x2 << NAU8825_IMM_CYC_SFT) +#define NAU8825_IMM_CYC_8192 (0x3 << NAU8825_IMM_CYC_SFT) +#define NAU8825_IMM_EN (1 << 3) +#define NAU8825_IMM_DAC_SRC_MASK 0x7 +#define NAU8825_IMM_DAC_SRC_BIQ 0x0 +#define NAU8825_IMM_DAC_SRC_DRC 0x1 +#define NAU8825_IMM_DAC_SRC_MIX 0x2 +#define NAU8825_IMM_DAC_SRC_SIN 0x3
/* CLASSG_CTRL (0x50) */ #define NAU8825_CLASSG_TIMER_SFT 8 #define NAU8825_CLASSG_TIMER_MASK (0x3f << NAU8825_CLASSG_TIMER_SFT) +#define NAU8825_CLASSG_TIMER_1ms (0x1 << NAU8825_CLASSG_TIMER_SFT) +#define NAU8825_CLASSG_TIMER_2ms (0x2 << NAU8825_CLASSG_TIMER_SFT) +#define NAU8825_CLASSG_TIMER_8ms (0x4 << NAU8825_CLASSG_TIMER_SFT) +#define NAU8825_CLASSG_TIMER_16ms (0x8 << NAU8825_CLASSG_TIMER_SFT) +#define NAU8825_CLASSG_TIMER_32ms (0x10 << NAU8825_CLASSG_TIMER_SFT) +#define NAU8825_CLASSG_TIMER_64ms (0x20 << NAU8825_CLASSG_TIMER_SFT) +#define NAU8825_CLASSG_LDAC_EN (0x1 << 2) +#define NAU8825_CLASSG_RDAC_EN (0x1 << 1) #define NAU8825_CLASSG_EN (1 << 0)
/* I2C_DEVICE_ID (0x58) */ @@ -271,7 +325,12 @@ #define NAU8825_SOFTWARE_ID_NAU8825 0x0
/* BIAS_ADJ (0x66) */ -#define NAU8825_BIAS_TESTDAC_EN (0x3 << 8) +#define NAU8825_BIAS_HPR_IMP (1 << 15) +#define NAU8825_BIAS_HPL_IMP (1 << 14) +#define NAU8825_BIAS_TESTDAC_SFT 8 +#define NAU8825_BIAS_TESTDAC_EN (0x3 << NAU8825_BIAS_TESTDAC_SFT) +#define NAU8825_BIAS_TESTDACR_EN (0x2 << NAU8825_BIAS_TESTDAC_SFT) +#define NAU8825_BIAS_TESTDACL_EN (0x1 << NAU8825_BIAS_TESTDAC_SFT) #define NAU8825_BIAS_VMID (1 << 6) #define NAU8825_BIAS_VMID_SEL_SFT 4 #define NAU8825_BIAS_VMID_SEL_MASK (3 << NAU8825_BIAS_VMID_SEL_SFT) @@ -290,6 +349,10 @@ #define NAU8825_POWERUP_ADCL (1 << 6)
/* RDAC (0x73) */ +#define NAU8825_RDAC_EN_SFT 12 +#define NAU8825_RDAC_EN (0x3 << NAU8825_RDAC_EN_SFT) +#define NAU8825_RDAC_CLK_EN_SFT 8 +#define NAU8825_RDAC_CLK_EN (0x3 << NAU8825_RDAC_CLK_EN_SFT) #define NAU8825_RDAC_CLK_DELAY_SFT 4 #define NAU8825_RDAC_CLK_DELAY_MASK (0x7 << NAU8825_RDAC_CLK_DELAY_SFT) #define NAU8825_RDAC_VREF_SFT 2 @@ -333,12 +396,21 @@ enum { NAU8825_CLK_FLL_FS, };
+/* Crosstalk detection state */ +enum { + NAU8825_XTALK_HPR_R2L = 0, + NAU8825_XTALK_HPL_R2L, + NAU8825_XTALK_IMM, + NAU8825_XTALK_DONE, +}; + struct nau8825 { struct device *dev; struct regmap *regmap; struct snd_soc_dapm_context *dapm; struct snd_soc_jack *jack; struct clk *mclk; + struct work_struct xtalk_work; int irq; int mclk_freq; /* 0 - mclk is disabled */ int button_pressed; @@ -357,6 +429,9 @@ struct nau8825 { int key_debounce; int jack_insert_debounce; int jack_eject_debounce; + int xtalk_state; + int imp_rms[NAU8825_XTALK_IMM]; + int high_imped; };
int nau8825_enable_jack_detect(struct snd_soc_codec *codec,
On Fri, Feb 05, 2016 at 01:52:46PM +0800, John Hsu wrote:
+/**
- computes log10 of a value; the result is round off to 3 decimal.
- this function takes reference to dvb-math.
- @return log10(value) * 1000
- */
+static u32 nau8825_intlog10_dec3(u32 value) +{
- u32 msb, logentry, significand, interpolation, log10val;
- u64 log2val;
- msb = fls(value) - 1;
- significand = value << (31 - msb);
- logentry = (significand >> 23) & 0xff;
- interpolation = ((significand & 0x7fffff) *
((logtable[(logentry + 1) & 0xff] -logtable[logentry]) & 0xffff)) >> 15;- log2val = ((msb << 24) + (logtable[logentry] << 8) + interpolation);
- log10val = (log2val * LOG10_MAGIC) >> 31;
- return log10val / ((1 << 24) / 1000);
+}
This doesn't look driver specific, it should go somewhere generic (though I can't immediately see any relevant place for it...).
- /* Config headphone volume */
- regmap_update_bits(nau8825->regmap, NAU8825_REG_HSVOL_CTRL,
NAU8825_HPL_VOL_MASK | NAU8825_HPR_VOL_MASK, 0x0492);
These are some very large register write sequences and there seems to be a bunch of stuff in them like the above which looks a lot like it's configuring things that we'd normally allow users to configure for their use case. This at least needs a lot more documentation about what this is doing any why, and it's not clear to me that the code is safe with respect to what happens if an application decides to do something at the same time as the callibration is running.
@@ -211,6 +585,7 @@ static bool nau8825_volatile_reg(struct device *dev, unsigned int reg) case NAU8825_REG_RESET: case NAU8825_REG_IRQ_STATUS: case NAU8825_REG_INT_CLR_KEY_STATUS:
- case NAU8825_REG_BIQ_CTRL ... NAU8825_REG_BIQ_COF10: case NAU8825_REG_IMM_RMS_L: case NAU8825_REG_IMM_RMS_R: case NAU8825_REG_I2C_DEVICE_ID:
It also looks like this could be split up a bit, things like this that are just adding new registers could be separate. The actual callibration is tricky but there's a bunch of other changes to support that.
On 2/10/2016 2:39 AM, Mark Brown wrote:
On Fri, Feb 05, 2016 at 01:52:46PM +0800, John Hsu wrote:
+/**
- computes log10 of a value; the result is round off to 3 decimal.
- this function takes reference to dvb-math.
- @return log10(value) * 1000
- */
+static u32 nau8825_intlog10_dec3(u32 value) +{
- u32 msb, logentry, significand, interpolation, log10val;
- u64 log2val;
- msb = fls(value) - 1;
- significand = value << (31 - msb);
- logentry = (significand >> 23) & 0xff;
- interpolation = ((significand & 0x7fffff) *
((logtable[(logentry + 1) & 0xff] -logtable[logentry]) & 0xffff)) >> 15;- log2val = ((msb << 24) + (logtable[logentry] << 8) + interpolation);
- log10val = (log2val * LOG10_MAGIC) >> 31;
- return log10val / ((1 << 24) / 1000);
+}
This doesn't look driver specific, it should go somewhere generic (though I can't immediately see any relevant place for it...).
Do you have any advise what we can do? It's possible to move these functions to other files, isn't it?
- /* Config headphone volume */
- regmap_update_bits(nau8825->regmap, NAU8825_REG_HSVOL_CTRL,
NAU8825_HPL_VOL_MASK | NAU8825_HPR_VOL_MASK, 0x0492);These are some very large register write sequences and there seems to be a bunch of stuff in them like the above which looks a lot like it's configuring things that we'd normally allow users to configure for their use case. This at least needs a lot more documentation about what this is doing any why, and it's not clear to me that the code is safe with respect to what happens if an application decides to do something at the same time as the callibration is running.
It has to enable DAC and ADC path for detection and measurement. A little like simple playback and record. Indeed, it spent some time to finish the whole sequence and the situation you mention will happen possibly. Do we can add some mutex in driver to avoid something like race condition happened? Could you give us suggenstion? Very thanks.
The document to what is done is fine and we'll add that in next patches.
@@ -211,6 +585,7 @@ static bool nau8825_volatile_reg(struct device *dev, unsigned int reg) case NAU8825_REG_RESET: case NAU8825_REG_IRQ_STATUS: case NAU8825_REG_INT_CLR_KEY_STATUS:
- case NAU8825_REG_BIQ_CTRL ... NAU8825_REG_BIQ_COF10: case NAU8825_REG_IMM_RMS_L: case NAU8825_REG_IMM_RMS_R: case NAU8825_REG_I2C_DEVICE_ID:
It also looks like this could be split up a bit, things like this that are just adding new registers could be separate. The actual callibration is tricky but there's a bunch of other changes to support that.
No problem, these registers can be split from others.
On Mon, Feb 29, 2016 at 07:21:16AM +0800, John Hsu wrote:
Please fix your mail client to word wrap within paragraphs at something substantially less than 80 columns. Doing this makes your messages much easier to read and reply to.
On 2/10/2016 2:39 AM, Mark Brown wrote:
On Fri, Feb 05, 2016 at 01:52:46PM +0800, John Hsu wrote:
+static u32 nau8825_intlog10_dec3(u32 value)
This doesn't look driver specific, it should go somewhere generic (though I can't immediately see any relevant place for it...).
Do you have any advise what we can do? It's possible to move these functions to other files, isn't it?
Propose a maths helper library?
It has to enable DAC and ADC path for detection and measurement. A little like simple playback and record. Indeed, it spent some time to finish the whole sequence and the situation you mention will happen possibly. Do we can add some mutex in driver to avoid something like race condition happened? Could you give us suggenstion? Very thanks.
Take a look at the da7219 driver, it is doing something similar.
On 3/2/2016 12:31 PM, Mark Brown wrote:
On Mon, Feb 29, 2016 at 07:21:16AM +0800, John Hsu wrote:
Please fix your mail client to word wrap within paragraphs at something substantially less than 80 columns. Doing this makes your messages much easier to read and reply to.
On 2/10/2016 2:39 AM, Mark Brown wrote:
On Fri, Feb 05, 2016 at 01:52:46PM +0800, John Hsu wrote:
+static u32 nau8825_intlog10_dec3(u32 value)
This doesn't look driver specific, it should go somewhere generic (though I can't immediately see any relevant place for it...).
Do you have any advise what we can do? It's possible to move these functions to other files, isn't it?
Propose a maths helper library?
I have no idea where to locate the logarithm function. The function was writen in reference to dvb-math which provides some math functions for other dvb driver to use. But I'm not sure the math is common for audio.
It has to enable DAC and ADC path for detection and measurement. A little like simple playback and record. Indeed, it spent some time to finish the whole sequence and the situation you mention will happen possibly. Do we can add some mutex in driver to avoid something like race condition happened? Could you give us suggenstion? Very thanks.
Take a look at the da7219 driver, it is doing something similar.
Now, we suffer an issue that the detection will interfere DAPM and clock control when they start at the same time. I thought it's hard to protect playback start sequence because audio hardware parameter and preparation are independent operations from user application. Is it better to let user application control it with kcontrol?
participants (2)
-
John Hsu -
Mark Brown