[PATCH] ASoC: rt1318: Add RT1318 audio amplifier driver
This is the initial amplifier driver for rt1318.
Signed-off-by: Jack Yu jack.yu@realtek.com --- include/sound/rt1318.h | 16 + sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/rt1318.c | 1387 +++++++++++++++++++++++++++++++++++++ sound/soc/codecs/rt1318.h | 342 +++++++++ 5 files changed, 1752 insertions(+) create mode 100644 include/sound/rt1318.h create mode 100644 sound/soc/codecs/rt1318.c create mode 100644 sound/soc/codecs/rt1318.h
diff --git a/include/sound/rt1318.h b/include/sound/rt1318.h new file mode 100644 index 000000000000..fe6bff06036c --- /dev/null +++ b/include/sound/rt1318.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * linux/sound/rt1318.h -- Platform data for RT1318 + * + * Copyright 2024 Realtek Semiconductor Corp. + */ + +#ifndef __LINUX_SND_RT1318_H +#define __LINUX_SND_RT1318_H + +struct rt1318_platform_data { + unsigned int init_r0_l; + unsigned int init_r0_r; +}; + +#endif diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 4afc43d3f71f..d846bfbeeb79 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -221,6 +221,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_RT722_SDCA_SDW imply SND_SOC_RT1308_SDW imply SND_SOC_RT1316_SDW + imply SND_SOC_RT1318 imply SND_SOC_RT1318_SDW imply SND_SOC_RT9120 imply SND_SOC_RTQ9128 @@ -1570,6 +1571,10 @@ config SND_SOC_RT1316_SDW depends on SOUNDWIRE select REGMAP_SOUNDWIRE
+config SND_SOC_RT1318 + tristate + depends on I2C + config SND_SOC_RT1318_SDW tristate "Realtek RT1318 Codec - SDW" depends on SOUNDWIRE diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index b4df22186e25..c5efae0aac72 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -221,6 +221,7 @@ snd-soc-rt1305-y := rt1305.o snd-soc-rt1308-y := rt1308.o snd-soc-rt1308-sdw-y := rt1308-sdw.o snd-soc-rt1316-sdw-y := rt1316-sdw.o +snd-soc-rt1318-y := rt1318.o snd-soc-rt1318-sdw-y := rt1318-sdw.o snd-soc-rt274-y := rt274.o snd-soc-rt286-y := rt286.o @@ -613,6 +614,7 @@ obj-$(CONFIG_SND_SOC_RT1305) += snd-soc-rt1305.o obj-$(CONFIG_SND_SOC_RT1308) += snd-soc-rt1308.o obj-$(CONFIG_SND_SOC_RT1308_SDW) += snd-soc-rt1308-sdw.o obj-$(CONFIG_SND_SOC_RT1316_SDW) += snd-soc-rt1316-sdw.o +obj-$(CONFIG_SND_SOC_RT1318) += snd-soc-rt1318.o obj-$(CONFIG_SND_SOC_RT1318_SDW) += snd-soc-rt1318-sdw.o obj-$(CONFIG_SND_SOC_RT274) += snd-soc-rt274.o obj-$(CONFIG_SND_SOC_RT286) += snd-soc-rt286.o diff --git a/sound/soc/codecs/rt1318.c b/sound/soc/codecs/rt1318.c new file mode 100644 index 000000000000..f9c6aceec2a6 --- /dev/null +++ b/sound/soc/codecs/rt1318.c @@ -0,0 +1,1387 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// rt1318.c -- RT1318 ALSA SoC audio amplifier driver +// Author: Jack Yu jack.yu@realtek.com +// +// Copyright(c) 2024 Realtek Semiconductor Corp. +// +// + +#include <linux/acpi.h> +#include <linux/fs.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/regmap.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/firmware.h> +#include <linux/gpio.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> +#include <sound/tlv.h> +#include <sound/rt1318.h> + +#include "rt1318.h" + +struct rt1318_init_reg { + u32 reg; + u8 val; + u8 delay; +}; + +static struct rt1318_init_reg init_list[] = { + { 0x0000C000, 0x01, 0}, + { 0x0000F20D, 0x00, 0}, + { 0x0000F212, 0x3E, 0}, + { 0x0000C001, 0x02, 0}, + { 0x0000C003, 0x22, 0}, + { 0x0000C004, 0x44, 0}, + { 0x0000C005, 0x44, 0}, + { 0x0000C007, 0x64, 0}, + { 0x0000C00E, 0xE7, 0}, + { 0x0000F223, 0x7F, 0}, + { 0x0000F224, 0xDB, 0}, + { 0x0000F225, 0xEE, 0}, + { 0x0000F226, 0x3F, 0}, + { 0x0000F227, 0x0F, 0}, + { 0x0000F21A, 0x78, 0}, + { 0x0000F242, 0x3C, 0}, + { 0x0000C120, 0x40, 0}, + { 0x0000C125, 0x03, 0}, + { 0x0000C321, 0x0A, 0}, + { 0x0000C200, 0xD8, 0}, + { 0x0000C201, 0x27, 0}, + { 0x0000C202, 0x0F, 0}, + { 0x0000C400, 0x0E, 0}, + { 0x0000C401, 0x43, 0}, + { 0x0000C402, 0xE0, 0}, + { 0x0000C403, 0x00, 0}, + { 0x0000C404, 0x4C, 0}, + { 0x0000C406, 0x40, 0}, + { 0x0000C407, 0x02, 0}, + { 0x0000C408, 0x3F, 0}, + { 0x0000C300, 0x01, 0}, + { 0x0000C125, 0x03, 0}, + { 0x0000DF00, 0x10, 0}, + { 0x0000F20B, 0x2A, 0}, + { 0x0000DF5F, 0x01, 0}, + { 0x0000DF60, 0xA7, 0}, + { 0x0000C203, 0x84, 0}, + { 0x0000C206, 0x78, 0}, + { 0x0000F10A, 0x09, 0}, + { 0x0000F10B, 0x4C, 0}, + { 0x0000F104, 0xF4, 0}, + { 0x0000F105, 0x03, 0}, + { 0x0000F109, 0xE0, 0}, + { 0x0000F10B, 0x5C, 0}, + { 0x0000F104, 0xF4, 0}, + { 0x0000F105, 0x04, 0}, + { 0x0000F109, 0x65, 0}, + { 0x0000F10B, 0x5C, 0}, + { 0x0000F104, 0xF4, 0}, + { 0x0000F105, 0x02, 0}, + { 0x0000F109, 0x30, 0}, + { 0x0000F10B, 0x5C, 0}, + { 0x0000E706, 0x0F, 0}, + { 0x0000E707, 0x30, 0}, + { 0x0000E806, 0x0F, 0}, + { 0x0000E807, 0x30, 0}, + { 0x0000CE04, 0x03, 0}, + { 0x0000CE05, 0x5F, 0}, + { 0x0000CE06, 0xA2, 0}, + { 0x0000CE07, 0x6B, 0}, + { 0x0000CF04, 0x03, 0}, + { 0x0000CF05, 0x5F, 0}, + { 0x0000CF06, 0xA2, 0}, + { 0x0000CF07, 0x6B, 0}, + { 0x0000CE60, 0xE3, 0}, + { 0x0000C130, 0x51, 0}, + { 0x0000E000, 0xA8, 0}, + { 0x0000F102, 0x00, 0}, + { 0x0000F103, 0x00, 0}, + { 0x0000F104, 0xF5, 0}, + { 0x0000F105, 0x23, 0}, + { 0x0000F109, 0x04, 0}, + { 0x0000F10A, 0x0B, 0}, + { 0x0000F10B, 0x4C, 0}, + { 0x0000F10B, 0x5C, 0}, + { 0x41001888, 0x00, 0}, + { 0x0000C121, 0x0B, 100}, + { 0x0000F102, 0x00, 0}, + { 0x0000F103, 0x00, 0}, + { 0x0000F104, 0xF5, 0}, + { 0x0000F105, 0x23, 0}, + { 0x0000F109, 0x00, 0}, + { 0x0000F10A, 0x0B, 0}, + { 0x0000F10B, 0x4C, 0}, + { 0x0000F10B, 0x5C, 0}, + { 0x0000F800, 0x20, 0}, + { 0x0000CA00, 0x80, 0}, + { 0x0000CA10, 0x00, 0}, + { 0x0000CA02, 0x78, 0}, + { 0x0000CA12, 0x78, 0}, + { 0x0000ED00, 0x90, 0}, + { 0x0000E604, 0x00, 0}, + { 0x0000DB00, 0x0C, 0}, + { 0x0000DD00, 0x0C, 0}, + { 0x0000DC19, 0x00, 0}, + { 0x0000DC1A, 0x6A, 0}, + { 0x0000DC1B, 0xAA, 0}, + { 0x0000DC1C, 0xAB, 0}, + { 0x0000DC1D, 0x00, 0}, + { 0x0000DC1E, 0x16, 0}, + { 0x0000DC1F, 0xDB, 0}, + { 0x0000DC20, 0x6D, 0}, + { 0x0000DE19, 0x00, 0}, + { 0x0000DE1A, 0x6A, 0}, + { 0x0000DE1B, 0xAA, 0}, + { 0x0000DE1C, 0xAB, 0}, + { 0x0000DE1D, 0x00, 0}, + { 0x0000DE1E, 0x16, 0}, + { 0x0000DE1F, 0xDB, 0}, + { 0x0000DE20, 0x6D, 0}, + { 0x0000DB32, 0x00, 0}, + { 0x0000DD32, 0x00, 0}, + { 0x0000DB33, 0x0A, 0}, + { 0x0000DD33, 0x0A, 0}, + { 0x0000DB34, 0x1A, 0}, + { 0x0000DD34, 0x1A, 0}, + { 0x0000DB15, 0xEF, 0}, + { 0x0000DD15, 0xEF, 0}, + { 0x0000DB17, 0xEF, 0}, + { 0x0000DD17, 0xEF, 0}, + { 0x0000DB94, 0x70, 0}, + { 0x0000DD94, 0x70, 0}, + { 0x0000DB19, 0x40, 0}, + { 0x0000DD19, 0x40, 0}, + { 0x0000DB12, 0xC0, 0}, + { 0x0000DD12, 0xC0, 0}, + { 0x0000DB00, 0x4C, 0}, + { 0x0000DB04, 0x05, 0}, + { 0x0000DB05, 0x03, 0}, + { 0x0000DD04, 0x05, 0}, + { 0x0000DD05, 0x03, 0}, + { 0x0000DBBB, 0x09, 0}, + { 0x0000DBBC, 0x30, 0}, + { 0x0000DBBD, 0xF0, 0}, + { 0x0000DBBE, 0xF1, 0}, + { 0x0000DDBB, 0x09, 0}, + { 0x0000DDBC, 0x30, 0}, + { 0x0000DDBD, 0xF0, 0}, + { 0x0000DDBE, 0xF1, 0}, + { 0x0000DB01, 0x79, 0}, + { 0x0000DD01, 0x79, 0}, + { 0x0000DB08, 0x40, 0}, + { 0x0000DD08, 0x40, 0}, + { 0x0000DC52, 0xEF, 0}, + { 0x0000DE52, 0xEF, 0}, + { 0x0000DB00, 0xCC, 0}, + { 0x0000CC2C, 0x00, 0}, + { 0x0000CC2D, 0x2A, 0}, + { 0x0000CC2E, 0x83, 0}, + { 0x0000CC2F, 0xA8, 0}, + { 0x0000CD2C, 0x00, 0}, + { 0x0000CD2D, 0x2A, 0}, + { 0x0000CD2E, 0x83, 0}, + { 0x0000CD2F, 0xA8, 0}, + { 0x0000CC24, 0x00, 0}, + { 0x0000CC25, 0x51, 0}, + { 0x0000CC26, 0xEB, 0}, + { 0x0000CC27, 0x85, 0}, + { 0x0000CD24, 0x00, 0}, + { 0x0000CD25, 0x51, 0}, + { 0x0000CD26, 0xEB, 0}, + { 0x0000CD27, 0x85, 0}, + { 0x0000CC20, 0x00, 0}, + { 0x0000CC21, 0x00, 0}, + { 0x0000CC22, 0x43, 0}, + { 0x0000CD20, 0x00, 0}, + { 0x0000CD21, 0x00, 0}, + { 0x0000CD22, 0x43, 0}, + { 0x0000CC16, 0x0F, 0}, + { 0x0000CC17, 0x00, 0}, + { 0x0000CD16, 0x0F, 0}, + { 0x0000CD17, 0x00, 0}, + { 0x0000CC29, 0x5D, 0}, + { 0x0000CC2A, 0xC0, 0}, + { 0x0000CD29, 0x5D, 0}, + { 0x0000CD2A, 0xC0, 0}, + { 0x0000CC31, 0x20, 0}, + { 0x0000CC32, 0x00, 0}, + { 0x0000CC33, 0x00, 0}, + { 0x0000CC34, 0x00, 0}, + { 0x0000CD31, 0x20, 0}, + { 0x0000CD32, 0x00, 0}, + { 0x0000CD33, 0x00, 0}, + { 0x0000CD34, 0x00, 0}, + { 0x0000CC36, 0x79, 0}, + { 0x0000CC37, 0x99, 0}, + { 0x0000CC38, 0x99, 0}, + { 0x0000CC39, 0x99, 0}, + { 0x0000CD36, 0x79, 0}, + { 0x0000CD37, 0x99, 0}, + { 0x0000CD38, 0x99, 0}, + { 0x0000CD39, 0x99, 0}, + { 0x0000CC09, 0x00, 0}, + { 0x0000CC0A, 0x07, 0}, + { 0x0000CC0B, 0x5F, 0}, + { 0x0000CC0C, 0x6F, 0}, + { 0x0000CD09, 0x00, 0}, + { 0x0000CD0A, 0x07, 0}, + { 0x0000CD0B, 0x5F, 0}, + { 0x0000CD0C, 0x6F, 0}, + { 0x0000CC0E, 0x00, 0}, + { 0x0000CC0F, 0x03, 0}, + { 0x0000CC10, 0xAF, 0}, + { 0x0000CC11, 0xB7, 0}, + { 0x0000CD0E, 0x00, 0}, + { 0x0000CD0F, 0x03, 0}, + { 0x0000CD10, 0xAF, 0}, + { 0x0000CD11, 0xB7, 0}, + { 0x0000CCD6, 0x00, 0}, + { 0x0000CCD7, 0x03, 0}, + { 0x0000CDD6, 0x00, 0}, + { 0x0000CDD7, 0x03, 0}, + { 0x0000CCD8, 0x00, 0}, + { 0x0000CCD9, 0x03, 0}, + { 0x0000CDD8, 0x00, 0}, + { 0x0000CDD9, 0x03, 0}, + { 0x0000CCDA, 0x00, 0}, + { 0x0000CCDB, 0x03, 0}, + { 0x0000CDDA, 0x00, 0}, + { 0x0000CDDB, 0x03, 0}, + { 0x0000C320, 0x20, 0}, + { 0x0000C203, 0x9C, 0}, +}; +#define rt1318_INIT_REG_LEN ARRAY_SIZE(init_list) + +static int rt1318_reg_init(struct snd_soc_component *component) +{ + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + int i; + + for (i = 0; i < rt1318_INIT_REG_LEN; i++) { + regmap_write(rt1318->regmap, init_list[i].reg, init_list[i].val); + mdelay(init_list[i].delay); + } + + return 0; +} + +static const struct reg_default rt1318_reg[] = { + { 0xc000, 0x00 }, + { 0xc001, 0x43 }, + { 0xc003, 0x22 }, + { 0xc004, 0x44 }, + { 0xc005, 0x44 }, + { 0xc006, 0x33 }, + { 0xc007, 0x64 }, + { 0xc008, 0x05 }, + { 0xc00a, 0xfc }, + { 0xc00b, 0x0f }, + { 0xc00c, 0x0e }, + { 0xc00d, 0xef }, + { 0xc00e, 0xe5 }, + { 0xc00f, 0xff }, + { 0xc120, 0xc0 }, + { 0xc121, 0x00 }, + { 0xc122, 0x00 }, + { 0xc123, 0x14 }, + { 0xc125, 0x00 }, + { 0xc130, 0x59 }, + { 0xc200, 0x00 }, + { 0xc201, 0x00 }, + { 0xc202, 0x00 }, + { 0xc203, 0x04 }, + { 0xc204, 0x00 }, + { 0xc205, 0x00 }, + { 0xc206, 0x68 }, + { 0xc207, 0x70 }, + { 0xc208, 0x00 }, + { 0xc20a, 0x00 }, + { 0xc20b, 0x01 }, + { 0xc20c, 0x7f }, + { 0xc20d, 0x01 }, + { 0xc20e, 0x7f }, + { 0xc300, 0x00 }, + { 0xc301, 0x00 }, + { 0xc303, 0x80 }, + { 0xc320, 0x00 }, + { 0xc321, 0x09 }, + { 0xc322, 0x02 }, + { 0xc400, 0x00 }, + { 0xc401, 0x00 }, + { 0xc402, 0x00 }, + { 0xc403, 0x00 }, + { 0xc404, 0x00 }, + { 0xc405, 0x00 }, + { 0xc406, 0x00 }, + { 0xc407, 0x00 }, + { 0xc408, 0x00 }, + { 0xc410, 0x04 }, + { 0xc430, 0x00 }, + { 0xc431, 0x00 }, + { 0xca00, 0x10 }, + { 0xca01, 0x00 }, + { 0xca02, 0x0b }, + { 0xca10, 0x10 }, + { 0xca11, 0x00 }, + { 0xca12, 0x0b }, + { 0xce04, 0x08 }, + { 0xce05, 0x00 }, + { 0xce06, 0x00 }, + { 0xce07, 0x00 }, + { 0xce60, 0x63 }, + { 0xcf04, 0x08 }, + { 0xcf05, 0x00 }, + { 0xcf06, 0x00 }, + { 0xcf07, 0x00 }, + { 0xdb00, 0x00 }, + { 0xdb08, 0x40 }, + { 0xdb12, 0x00 }, + { 0xdb35, 0x00 }, + { 0xdbb5, 0x00 }, + { 0xdbb6, 0x40 }, + { 0xdbb7, 0x00 }, + { 0xdbb8, 0x00 }, + { 0xdbc5, 0x00 }, + { 0xdbc6, 0x00 }, + { 0xdbc7, 0x00 }, + { 0xdbc8, 0x00 }, + { 0xdd08, 0x40 }, + { 0xdd12, 0x00 }, + { 0xdd35, 0x00 }, + { 0xddb5, 0x00 }, + { 0xddb6, 0x40 }, + { 0xddb7, 0x00 }, + { 0xddb8, 0x00 }, + { 0xddc5, 0x00 }, + { 0xddc6, 0x00 }, + { 0xddc7, 0x00 }, + { 0xddc8, 0x00 }, + { 0xdd93, 0x00 }, + { 0xdd94, 0x64 }, + { 0xdf00, 0x00 }, + { 0xdf5f, 0x00 }, + { 0xdf60, 0x00 }, + { 0xe000, 0x08 }, + { 0xe300, 0xa0 }, + { 0xe400, 0x22 }, + { 0xe706, 0x2f }, + { 0xe707, 0x2f }, + { 0xe806, 0x2f }, + { 0xe807, 0x2f }, + { 0xea00, 0x43 }, + { 0xed00, 0x80 }, + { 0xed01, 0x0f }, + { 0xed02, 0xff }, + { 0xed03, 0x00 }, + { 0xed04, 0x00 }, + { 0xed05, 0x0f }, + { 0xed06, 0xff }, + { 0xf010, 0x10 }, + { 0xf011, 0xec }, + { 0xf012, 0x68 }, + { 0xf013, 0x21 }, + { 0xf102, 0x00 }, + { 0xf103, 0x00 }, + { 0xf104, 0x00 }, + { 0xf105, 0x00 }, + { 0xf106, 0x00 }, + { 0xf107, 0x00 }, + { 0xf108, 0x00 }, + { 0xf109, 0x00 }, + { 0xf10a, 0x03 }, + { 0xf10b, 0x40 }, + { 0xf20b, 0x28 }, + { 0xf20d, 0x00 }, + { 0xf212, 0x00 }, + { 0xf21a, 0x00 }, + { 0xf223, 0x40 }, + { 0xf224, 0x00 }, + { 0xf225, 0x00 }, + { 0xf226, 0x00 }, + { 0xf227, 0x00 }, + { 0xf242, 0x0c }, + { 0xf800, 0x00 }, + { 0xf801, 0x12 }, + { 0xf802, 0xe0 }, + { 0xf803, 0x2f }, + { 0xf804, 0x00 }, + { 0xf805, 0x00 }, + { 0xf806, 0x07 }, + { 0xf807, 0xff }, +}; + +static bool rt1318_volatile_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case 0xc000: + case 0xc301: + case 0xc410: + case 0xc430 ... 0xc431: + case 0xdb06: + case 0xdb12: + case 0xdb1d ... 0xdb1f: + case 0xdb35: + case 0xdb37: + case 0xdb8a ... 0xdb92: + case 0xdbc5 ... 0xdbc8: + case 0xdc2b ... 0xdc49: + case 0xdd0b: + case 0xdd12: + case 0xdd1d ... 0xdd1f: + case 0xdd35: + case 0xdd8a ... 0xdd92: + case 0xddc5 ... 0xddc8: + case 0xde2b ... 0xde44: + case 0xdf4a ... 0xdf55: + case 0xe224 ... 0xe23b: + case 0xea01: + case 0xebc5: + case 0xebc8: + case 0xebcb ... 0xebcc: + case 0xed03 ... 0xed06: + case 0xf010 ... 0xf014: + return true; + + default: + return false; + } +} + +static bool rt1318_readable_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case 0xc000 ... 0xc00f: + case 0xc120 ... 0xc130: + case 0xc200 ... 0xc20e: + case 0xc300 ... 0xc303: + case 0xc320 ... 0xc322: + case 0xc400 ... 0xc408: + case 0xc430 ... 0xc431: + case 0xca00 ... 0xca02: + case 0xca10 ... 0xca12: + case 0xcb00 ... 0xcb0b: + case 0xcc00 ... 0xcce5: + case 0xcd00 ... 0xcde5: + case 0xce00 ... 0xce6a: + case 0xcf00 ... 0xcf53: + case 0xd000 ... 0xd0cc: + case 0xd100 ... 0xd1b9: + case 0xdb00 ... 0xdc53: + case 0xdd00 ... 0xde53: + case 0xdf00 ... 0xdf6b: + case 0xe000: + case 0xe300: + case 0xe400: + case 0xe706 ... 0xe707: + case 0xe806 ... 0xe807: + case 0xea00: + case 0xeb00 ... 0xebcc: + case 0xec00 ... 0xecb9: + case 0xed00 ... 0xed06: + case 0xf010 ... 0xf014: + case 0xf102 ... 0xf10b: + case 0xf20b: + case 0xf20d ... 0xf242: + case 0xf800 ... 0xf807: + return true; + default: + return false; + } +} + +static int rt1318_dac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + regmap_update_bits(rt1318->regmap, RT1318_PWR_STA1, + RT1318_PDB_CTRL_MASK, RT1318_PDB_CTRL_HIGH); + break; + + case SND_SOC_DAPM_POST_PMD: + regmap_update_bits(rt1318->regmap, RT1318_PWR_STA1, + RT1318_PDB_CTRL_MASK, RT1318_PDB_CTRL_LOW); + break; + + default: + break; + } + return 0; +} + +static int rt1318_init_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + rt1318->rt1318_init = ucontrol->value.integer.value[0]; + + if (rt1318->rt1318_init) + rt1318_reg_init(component); + + return 0; +} + +static int rt1318_init_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = rt1318->rt1318_init; + + return 0; +} + +static int rt1318_dvol_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + rt1318->rt1318_dvol = ucontrol->value.integer.value[0]; + + if (rt1318->rt1318_dvol <= RT1318_DVOL_STEP) { + regmap_write(rt1318->regmap, RT1318_DA_VOL_L_8, rt1318->rt1318_dvol >> 8); + regmap_write(rt1318->regmap, RT1318_DA_VOL_L_1_7, rt1318->rt1318_dvol & 0xff); + regmap_write(rt1318->regmap, RT1318_DA_VOL_R_8, rt1318->rt1318_dvol >> 8); + regmap_write(rt1318->regmap, RT1318_DA_VOL_R_1_7, rt1318->rt1318_dvol & 0xff); + } else { + rt1318->rt1318_dvol = RT1318_DVOL_STEP; + dev_err(component->dev, "Unsupported volume gain\n"); + } + + return 0; +} + +static int rt1318_dvol_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = rt1318->rt1318_dvol; + + return 0; +} + +static const struct snd_kcontrol_new rt1318_snd_controls[] = { + SOC_SINGLE_EXT("rt1318 digital volume", SND_SOC_NOPM, 0, 383, 0, + rt1318_dvol_get, rt1318_dvol_put), + SOC_SINGLE_EXT("rt1318 init", SND_SOC_NOPM, 0, 1, 0, + rt1318_init_get, rt1318_init_put), +}; + +static const struct snd_soc_dapm_widget rt1318_dapm_widgets[] = { + /* Audio Interface */ + SND_SOC_DAPM_AIF_IN("AIF1RX", "AIF1 Playback", 0, SND_SOC_NOPM, 0, 0), + /* DACs */ + SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0, + rt1318_dac_event, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), + /* Output Lines */ + SND_SOC_DAPM_OUTPUT("Amp"), +}; + +static const struct snd_soc_dapm_route rt1318_dapm_routes[] = { + {"DAC", NULL, "AIF1RX"}, + {"Amp", NULL, "DAC"}, +}; + +static int rt1318_get_clk_info(int sclk, int rate) +{ + int i, pd[] = {1, 2, 4, 8, 16, 24}; + + if (sclk <= 0 || rate <= 0) + return -EINVAL; + + rate = rate << 8; + for (i = 0; i < ARRAY_SIZE(pd); i++) + if (sclk == rate * pd[i]) + return i; + + return -EINVAL; +} + +static int rt1318_clk_ip_info(struct snd_soc_component *component, int lrclk) +{ + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + if (lrclk == RT1318_LRCLK_48000 || lrclk == RT1318_LRCLK_44100 || + lrclk == RT1318_LRCLK_16000) + regmap_update_bits(rt1318->regmap, RT1318_SRC_TCON, + RT1318_SRCIN_F12288_MASK | RT1318_SRCIN_DACLK_MASK, + RT1318_SRCIN_TCON4 | RT1318_DACLK_TCON4); + else if (lrclk == RT1318_LRCLK_96000) + regmap_update_bits(rt1318->regmap, RT1318_SRC_TCON, + RT1318_SRCIN_F12288_MASK | RT1318_SRCIN_DACLK_MASK, + RT1318_SRCIN_TCON4 | RT1318_DACLK_TCON2); + else if (lrclk == RT1318_LRCLK_192000) + regmap_update_bits(rt1318->regmap, RT1318_SRC_TCON, + RT1318_SRCIN_F12288_MASK | RT1318_SRCIN_DACLK_MASK, + RT1318_SRCIN_TCON4 | RT1318_DACLK_TCON1); + else + return -EINVAL; + + return 0; +} + +static int rt1318_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + int data_len = 0, ch_len = 0; + int pre_div, ret; + + rt1318->lrck = params_rate(params); + pre_div = rt1318_get_clk_info(rt1318->sysclk, rt1318->lrck); + if (pre_div < 0) { + dev_err(component->dev, "Unsupported clock setting\n"); + return -EINVAL; + } + ret = rt1318_clk_ip_info(component, rt1318->lrck); + if (ret < 0) { + dev_err(component->dev, "Unsupported clock setting\n"); + return -EINVAL; + } + + switch (params_width(params)) { + case 16: + break; + case 20: + data_len = RT1318_I2S_DL_20; + ch_len = RT1318_I2S_DL_20; + break; + case 24: + data_len = RT1318_I2S_DL_24; + ch_len = RT1318_I2S_DL_24; + break; + case 32: + data_len = RT1318_I2S_DL_32; + ch_len = RT1318_I2S_DL_32; + break; + case 8: + data_len = RT1318_I2S_DL_8; + ch_len = RT1318_I2S_DL_8; + break; + default: + return -EINVAL; + } + + regmap_update_bits(rt1318->regmap, RT1318_CLK2, + RT1318_DIV_AP_MASK | RT1318_DIV_DAMOD_MASK, + pre_div << RT1318_DIV_AP_SFT | + pre_div << RT1318_DIV_DAMOD_SFT); + regmap_update_bits(rt1318->regmap, RT1318_CLK3, + RT1318_AD_STO1_MASK | RT1318_AD_STO2_MASK, + pre_div << RT1318_AD_STO1_SFT | + pre_div << RT1318_AD_STO2_SFT); + regmap_update_bits(rt1318->regmap, RT1318_CLK4, + RT1318_AD_ANA_STO1_MASK | RT1318_AD_ANA_STO2_MASK, + pre_div << RT1318_AD_ANA_STO1_SFT | + pre_div << RT1318_AD_ANA_STO2_SFT); + regmap_update_bits(rt1318->regmap, RT1318_CLK5, + RT1318_DIV_FIFO_IN_MASK | RT1318_DIV_FIFO_OUT_MASK, + pre_div << RT1318_DIV_FIFO_IN_SFT | + pre_div << RT1318_DIV_FIFO_OUT_SFT); + regmap_update_bits(rt1318->regmap, RT1318_CLK6, + RT1318_DIV_NLMS_MASK | RT1318_DIV_AD_MONO_MASK | + RT1318_DIV_POST_G_MASK, pre_div << RT1318_DIV_NLMS_SFT | + pre_div << RT1318_DIV_AD_MONO_SFT | + pre_div << RT1318_DIV_POST_G_SFT); + + regmap_update_bits(rt1318->regmap, RT1318_TDM_CTRL2, + RT1318_I2S_DL_MASK, data_len << RT1318_I2S_DL_SFT); + regmap_update_bits(rt1318->regmap, RT1318_TDM_CTRL3, + RT1318_I2S_TX_CHL_MASK | RT1318_I2S_RX_CHL_MASK, + ch_len << RT1318_I2S_TX_CHL_SFT | + ch_len << RT1318_I2S_RX_CHL_SFT); + + return 0; +} + +static int rt1318_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_component *component = dai->component; + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + unsigned int reg_val = 0, reg_val2 = 0; + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_NF: + reg_val2 |= RT1318_TDM_BCLK_INV; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + break; + + case SND_SOC_DAIFMT_LEFT_J: + reg_val |= RT1318_FMT_LEFT_J; + break; + + case SND_SOC_DAIFMT_DSP_A: + reg_val |= RT1318_FMT_PCM_A_R; + break; + + case SND_SOC_DAIFMT_DSP_B: + reg_val |= RT1318_FMT_PCM_B_R; + break; + + default: + return -EINVAL; + } + + regmap_update_bits(rt1318->regmap, RT1318_TDM_CTRL1, + RT1318_I2S_FMT_MASK, reg_val); + regmap_update_bits(rt1318->regmap, RT1318_TDM_CTRL1, + RT1318_TDM_BCLK_MASK, reg_val2); + + return 0; +} + +static int rt1318_set_dai_sysclk(struct snd_soc_dai *dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_component *component = dai->component; + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + int reg_val = 0; + + if (freq == rt1318->sysclk && clk_id == rt1318->sysclk_src) + return 0; + + switch (clk_id) { + case RT1318_SCLK_S_BCLK: + reg_val |= RT1318_SYSCLK_BCLK; + break; + case RT1318_SCLK_S_SDW: + reg_val |= RT1318_SYSCLK_SDW; + break; + case RT1318_SCLK_S_PLL2F: + reg_val |= RT1318_SYSCLK_PLL2F; + break; + case RT1318_SCLK_S_PLL2B: + reg_val |= RT1318_SYSCLK_PLL2B; + break; + case RT1318_SCLK_S_MCLK: + reg_val |= RT1318_SYSCLK_MCLK; + break; + case RT1318_SCLK_S_RC0: + reg_val |= RT1318_SYSCLK_RC1; + break; + case RT1318_SCLK_S_RC1: + reg_val |= RT1318_SYSCLK_RC2; + break; + case RT1318_SCLK_S_RC2: + reg_val |= RT1318_SYSCLK_RC3; + break; + default: + dev_err(component->dev, "Invalid clock id (%d)\n", clk_id); + return -EINVAL; + } + + rt1318->sysclk = freq; + rt1318->sysclk_src = clk_id; + dev_dbg(dai->dev, "Sysclk is %dHz and clock id is %d\n", freq, clk_id); + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_SYSCLK_SEL_MASK, reg_val); + + return 0; +} + +static const struct pll_calc_map pll_preset_table[] = { + {512000, 4096000, 22, 190, 0, true, false}, + {1024000, 4096000, 22, 94, 0, true, false}, + {1024000, 16384000, 4, 190, 0, true, false}, + {1411200, 11289600, 6, 62, 0, true, false}, + {1536000, 12288000, 6, 62, 0, true, false}, + {2822400, 11289600, 6, 62, 0, true, false}, + {2822400, 45158400, 0, 62, 0, true, false}, + {2822400, 49152000, 0, 62, 0, true, false}, + {3072000, 12288000, 6, 62, 0, true, false}, + {3072000, 24576000, 2, 62, 0, true, false}, + {3072000, 49152000, 0, 62, 0, true, false}, + {6144000, 24576000, 2, 94, 4, false, false}, + {6144000, 49152000, 0, 30, 0, true, false}, + {6144000, 98304000, 0, 94, 4, false, true}, + {12288000, 49152000, 0, 62, 6, false, false}, +}; + +int rt1318_pll_calc(const unsigned int freq_in, + const unsigned int freq_out, struct rt1318_pll_code *pll_code) +{ + int max_n = RT1318_PLL_N_MAX, max_m = RT1318_PLL_M_MAX; + int i, k, red, n_t, pll_out, in_t, out_t; + int n = 0, m = 0, m_t = 0; + int red_t = abs(freq_out - freq_in); + bool m_bypass = false, k_bypass = false; + + if (RT1318_PLL_INP_MAX < freq_in || RT1318_PLL_INP_MIN > freq_in) + return -EINVAL; + + for (i = 0; i < ARRAY_SIZE(pll_preset_table); i++) { + if (freq_in == pll_preset_table[i].pll_in && + freq_out == pll_preset_table[i].pll_out) { + k = pll_preset_table[i].k; + m = pll_preset_table[i].m; + n = pll_preset_table[i].n; + m_bypass = pll_preset_table[i].m_bp; + k_bypass = pll_preset_table[i].k_bp; + goto code_find; + } + } + + k = 100000000 / freq_out - 2; + if (k > RT1318_PLL_K_MAX) + k = RT1318_PLL_K_MAX; + if (k < 0) { + k = 0; + k_bypass = true; + } + for (n_t = 0; n_t <= max_n; n_t++) { + in_t = freq_in / (k_bypass ? 1 : (k + 2)); + pll_out = freq_out / (n_t + 2); + if (in_t < 0) + continue; + if (in_t == pll_out) { + m_bypass = true; + n = n_t; + goto code_find; + } + red = abs(in_t - pll_out); + if (red < red_t) { + m_bypass = true; + n = n_t; + m = m_t; + if (red == 0) + goto code_find; + red_t = red; + } + for (m_t = 0; m_t <= max_m; m_t++) { + out_t = in_t / (m_t + 2); + red = abs(out_t - pll_out); + if (red < red_t) { + m_bypass = false; + n = n_t; + m = m_t; + if (red == 0) + goto code_find; + red_t = red; + } + } + } + pr_debug("Only get approximation about PLL\n"); + +code_find: + + pll_code->m_bp = m_bypass; + pll_code->k_bp = k_bypass; + pll_code->m_code = m; + pll_code->n_code = n; + pll_code->k_code = k; + return 0; +} + +static int rt1318_set_dai_pll(struct snd_soc_dai *dai, int pll_id, int source, + unsigned int freq_in, unsigned int freq_out) +{ + struct snd_soc_component *component = dai->component; + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + struct rt1318_pll_code pll_code; + int ret; + + if (!freq_in || !freq_out) { + dev_dbg(component->dev, "PLL disabled\n"); + rt1318->pll_in = 0; + rt1318->pll_out = 0; + return 0; + } + + if (source == rt1318->pll_src && freq_in == rt1318->pll_in && + freq_out == rt1318->pll_out) + return 0; + + switch (source) { + case RT1318_PLL_S_BCLK0: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_BCLK0); + break; + case RT1318_PLL_S_BCLK1: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_BCLK1); + break; + case RT1318_PLL_S_RC: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_RC); + break; + case RT1318_PLL_S_MCLK: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_MCLK); + break; + case RT1318_PLL_S_SDW_IN_PLL: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_SDW1); + break; + case RT1318_PLL_S_SDW_0: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_SDW2); + break; + case RT1318_PLL_S_SDW_1: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_SDW3); + break; + case RT1318_PLL_S_SDW_2: + regmap_update_bits(rt1318->regmap, RT1318_CLK1, + RT1318_PLLIN_MASK, RT1318_PLLIN_SDW4); + break; + default: + dev_err(component->dev, "Unknown PLL source %d\n", source); + return -EINVAL; + } + + ret = rt1318_pll_calc(freq_in, freq_out, &pll_code); + if (ret < 0) { + dev_err(component->dev, "Unsupport input clock %d\n", freq_in); + return ret; + } + + dev_dbg(component->dev, "bypass=%d m=%d n=%d k=%d\n", + pll_code.m_bp, (pll_code.m_bp ? 0 : pll_code.m_code), + pll_code.n_code, pll_code.k_code); + + regmap_update_bits(rt1318->regmap, RT1318_PLL1_K, + RT1318_K_PLL1_MASK, pll_code.k_code); + regmap_update_bits(rt1318->regmap, RT1318_PLL1_M, + RT1318_M_PLL1_MASK, (pll_code.m_bp ? 0 : pll_code.m_code)); + regmap_update_bits(rt1318->regmap, RT1318_PLL1_N_8, + RT1318_N_8_PLL1_MASK, pll_code.n_code >> 8); + regmap_update_bits(rt1318->regmap, RT1318_PLL1_N_7_0, + RT1318_N_7_0_PLL1_MASK, pll_code.n_code); + + rt1318->pll_in = freq_in; + rt1318->pll_out = freq_out; + rt1318->pll_src = source; + + return 0; +} + +static int rt1318_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask, + unsigned int rx_mask, int slots, int slot_width) +{ + struct snd_soc_component *component = dai->component; + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + unsigned int cn = 0, cl = 0, rx_slotnum; + int ret = 0, first_bit; + + switch (slots) { + case 4: + cn |= RT1318_I2S_CH_TX_4CH; + cn |= RT1318_I2S_CH_RX_4CH; + break; + case 6: + cn |= RT1318_I2S_CH_TX_6CH; + cn |= RT1318_I2S_CH_RX_6CH; + break; + case 8: + cn |= RT1318_I2S_CH_TX_8CH; + cn |= RT1318_I2S_CH_RX_8CH; + break; + case 2: + break; + default: + return -EINVAL; + } + + switch (slot_width) { + case 20: + cl |= RT1318_I2S_TX_CHL_20; + cl |= RT1318_I2S_RX_CHL_20; + break; + case 24: + cl |= RT1318_I2S_TX_CHL_24; + cl |= RT1318_I2S_RX_CHL_24; + break; + case 32: + cl |= RT1318_I2S_TX_CHL_32; + cl |= RT1318_I2S_RX_CHL_32; + break; + case 8: + cl |= RT1318_I2S_TX_CHL_8; + cl |= RT1318_I2S_RX_CHL_8; + break; + case 16: + break; + default: + return -EINVAL; + } + + /* Rx slot configuration */ + rx_slotnum = hweight_long(rx_mask); + if (rx_slotnum != 1) { + ret = -EINVAL; + dev_err(component->dev, "too many rx slots or zero slot\n"); + goto _set_tdm_err_; + } + + first_bit = __ffs(rx_mask); + switch (first_bit) { + case 0: + case 2: + case 4: + case 6: + regmap_update_bits(rt1318->regmap, + RT1318_TDM_CTRL9, + RT1318_TDM_I2S_TX_L_DAC1_1_MASK | + RT1318_TDM_I2S_TX_R_DAC1_1_MASK, + (first_bit << RT1318_TDM_I2S_TX_L_DAC1_1_SFT) | + ((first_bit + 1) << RT1318_TDM_I2S_TX_R_DAC1_1_SFT)); + break; + case 1: + case 3: + case 5: + case 7: + regmap_update_bits(rt1318->regmap, + RT1318_TDM_CTRL9, + RT1318_TDM_I2S_TX_L_DAC1_1_MASK | + RT1318_TDM_I2S_TX_R_DAC1_1_MASK, + ((first_bit - 1) << RT1318_TDM_I2S_TX_L_DAC1_1_SFT) | + (first_bit << RT1318_TDM_I2S_TX_R_DAC1_1_SFT)); + break; + default: + ret = -EINVAL; + goto _set_tdm_err_; + } + + regmap_update_bits(rt1318->regmap, RT1318_TDM_CTRL2, + RT1318_I2S_CH_TX_MASK | RT1318_I2S_CH_RX_MASK, cn); + regmap_update_bits(rt1318->regmap, RT1318_TDM_CTRL3, + RT1318_I2S_TX_CHL_MASK | RT1318_I2S_RX_CHL_MASK, cl); + +_set_tdm_err_: + return ret; +} + +static int rt1318_probe(struct snd_soc_component *component) +{ + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + rt1318->component = component; + + rt1318_reg_init(component); + schedule_work(&rt1318->cali_work); + rt1318->rt1318_dvol = RT1318_DVOL_STEP; + + return 0; +} + +static void rt1318_remove(struct snd_soc_component *component) +{ + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + cancel_work_sync(&rt1318->cali_work); +} + +#ifdef CONFIG_PM +static int rt1318_suspend(struct snd_soc_component *component) +{ + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + regcache_cache_only(rt1318->regmap, true); + regcache_mark_dirty(rt1318->regmap); + return 0; +} + +static int rt1318_resume(struct snd_soc_component *component) +{ + struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component); + + regcache_cache_only(rt1318->regmap, false); + regcache_sync(rt1318->regmap); + return 0; +} +#else +#define rt1318_suspend NULL +#define rt1318_resume NULL +#endif + +#define RT1318_STEREO_RATES SNDRV_PCM_RATE_8000_192000 +#define RT1318_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S8) + +static const struct snd_soc_dai_ops rt1318_aif_dai_ops = { + .hw_params = rt1318_hw_params, + .set_fmt = rt1318_set_dai_fmt, + .set_sysclk = rt1318_set_dai_sysclk, + .set_pll = rt1318_set_dai_pll, + .set_tdm_slot = rt1318_set_tdm_slot, +}; + +static struct snd_soc_dai_driver rt1318_dai[] = { + { + .name = "rt1318-aif", + .id = 0, + .playback = { + .stream_name = "AIF1 Playback", + .channels_min = 1, + .channels_max = 2, + .rates = RT1318_STEREO_RATES, + .formats = RT1318_FORMATS, + }, + .ops = &rt1318_aif_dai_ops, + } +}; + +static const struct snd_soc_component_driver soc_component_dev_rt1318 = { + .probe = rt1318_probe, + .remove = rt1318_remove, + .suspend = rt1318_suspend, + .resume = rt1318_resume, + .controls = rt1318_snd_controls, + .num_controls = ARRAY_SIZE(rt1318_snd_controls), + .dapm_widgets = rt1318_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(rt1318_dapm_widgets), + .dapm_routes = rt1318_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(rt1318_dapm_routes), + .use_pmdown_time = 1, + .endianness = 1, +}; + +static const struct regmap_config rt1318_regmap = { + .reg_bits = 32, + .val_bits = 8, + .readable_reg = rt1318_readable_register, + .volatile_reg = rt1318_volatile_register, + .max_register = 0x41001888, + .reg_defaults = rt1318_reg, + .num_reg_defaults = ARRAY_SIZE(rt1318_reg), + .cache_type = REGCACHE_RBTREE, + .use_single_read = true, + .use_single_write = true, +}; + +static const struct i2c_device_id rt1318_i2c_id[] = { + { "rt1318", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, rt1318_i2c_id); + +static const struct of_device_id rt1318_of_match[] = { + { .compatible = "realtek,rt1318", }, + {}, +}; +MODULE_DEVICE_TABLE(of, rt1318_of_match); + +#ifdef CONFIG_ACPI +static const struct acpi_device_id rt1318_acpi_match[] = { + { "10EC1318", 0}, + { }, +}; +MODULE_DEVICE_TABLE(acpi, rt1318_acpi_match); +#endif + +static int rt1318_parse_dt(struct rt1318_priv *rt1318, struct device *dev) +{ + device_property_read_u32(dev, "realtek,r0_l", + &rt1318->pdata.init_r0_l); + device_property_read_u32(dev, "realtek,r0_r", + &rt1318->pdata.init_r0_r); + + return 0; +} + +static void rt1318_calibration_sequence(struct rt1318_priv *rt1318) +{ + regmap_write(rt1318->regmap, RT1318_CLK1, 0x22); + regmap_write(rt1318->regmap, RT1318_PLL1_N_7_0, 0x06); + regmap_write(rt1318->regmap, RT1318_STP_TEMP_L, 0xCC); + regmap_write(rt1318->regmap, RT1318_STP_SEL_L, 0x40); + regmap_write(rt1318->regmap, RT1318_STP_SEL_R, 0x40); + regmap_write(rt1318->regmap, RT1318_SINE_GEN0, 0x20); + regmap_write(rt1318->regmap, RT1318_SPK_VOL_TH, 0x00); + regmap_write(rt1318->regmap, RT1318_FEEDBACK_PATH, 0x0B); + regmap_write(rt1318->regmap, RT1318_TCON, 0x1C); + regmap_write(rt1318->regmap, RT1318_TCON_RELATE, 0x58); + regmap_write(rt1318->regmap, RT1318_TCON_RELATE, 0x78); + regmap_write(rt1318->regmap, RT1318_STP_R0_EN_L, 0xC2); +} + +static void rt1318_r0_calculate(struct rt1318_priv *rt1318) +{ + unsigned int r0_l, r0_l_byte0, r0_l_byte1, r0_l_byte2, r0_l_byte3; + unsigned int r0_r, r0_r_byte0, r0_r_byte1, r0_r_byte2, r0_r_byte3; + unsigned int r0_l_integer, r0_l_factor, r0_r_integer, r0_r_factor; + unsigned int format = 16777216; /* 2^24 */ + + regmap_read(rt1318->regmap, RT1318_R0_L_24, &r0_l_byte0); + regmap_read(rt1318->regmap, RT1318_R0_L_23_16, &r0_l_byte1); + regmap_read(rt1318->regmap, RT1318_R0_L_15_8, &r0_l_byte2); + regmap_read(rt1318->regmap, RT1318_R0_L_7_0, &r0_l_byte3); + r0_l = r0_l_byte0 << 24 | r0_l_byte1 << 16 | r0_l_byte2 << 8 | r0_l_byte3; + r0_l_integer = format / r0_l; + r0_l_factor = (format * 10) / r0_l - r0_l_integer * 10; + + regmap_read(rt1318->regmap, RT1318_R0_R_24, &r0_r_byte0); + regmap_read(rt1318->regmap, RT1318_R0_R_23_16, &r0_r_byte1); + regmap_read(rt1318->regmap, RT1318_R0_R_15_8, &r0_r_byte2); + regmap_read(rt1318->regmap, RT1318_R0_R_7_0, &r0_r_byte3); + r0_r = r0_r_byte0 << 24 | r0_r_byte1 << 16 | r0_r_byte2 << 8 | r0_r_byte3; + r0_r_integer = format / r0_r; + r0_r_factor = (format * 10) / r0_r - r0_r_integer * 10; + + dev_dbg(rt1318->component->dev, "r0_l_ch:%d.%d ohm\n", r0_l_integer, r0_l_factor); + dev_dbg(rt1318->component->dev, "r0_r_ch:%d.%d ohm\n", r0_r_integer, r0_r_factor); +} + +static void rt1318_r0_restore(struct rt1318_priv *rt1318) +{ + regmap_write(rt1318->regmap, RT1318_PRE_R0_L_24, + (rt1318->pdata.init_r0_l >> 24) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_L_23_16, + (rt1318->pdata.init_r0_l >> 16) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_L_15_8, + (rt1318->pdata.init_r0_l >> 8) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_L_7_0, + (rt1318->pdata.init_r0_l >> 0) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_R_24, + (rt1318->pdata.init_r0_r >> 24) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_R_23_16, + (rt1318->pdata.init_r0_r >> 16) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_R_15_8, + (rt1318->pdata.init_r0_r >> 8) & 0xff); + regmap_write(rt1318->regmap, RT1318_PRE_R0_R_7_0, + (rt1318->pdata.init_r0_r >> 0) & 0xff); + regmap_write(rt1318->regmap, RT1318_STP_SEL_L, 0x80); + regmap_write(rt1318->regmap, RT1318_STP_SEL_R, 0x80); + regmap_write(rt1318->regmap, RT1318_R0_CMP_L_FLAG, 0xc0); + regmap_write(rt1318->regmap, RT1318_R0_CMP_R_FLAG, 0xc0); + regmap_write(rt1318->regmap, RT1318_STP_R0_EN_L, 0xc0); + regmap_write(rt1318->regmap, RT1318_STP_R0_EN_R, 0xc0); + regmap_write(rt1318->regmap, RT1318_STP_TEMP_L, 0xcc); + regmap_write(rt1318->regmap, RT1318_TCON, 0x9c); +} + +static int rt1318_calibrate(struct rt1318_priv *rt1318) +{ + int chk_cnt = 30, count = 0; + int val, val2; + + regmap_write(rt1318->regmap, RT1318_PWR_STA1, 0x1); + usleep_range(0, 10000); + rt1318_calibration_sequence(rt1318); + + while (count < chk_cnt) { + msleep(100); + regmap_read(rt1318->regmap, RT1318_R0_CMP_L_FLAG, &val); + regmap_read(rt1318->regmap, RT1318_R0_CMP_R_FLAG, &val2); + val = (val >> 1) & 0x1; + val2 = (val2 >> 1) & 0x1; + if (val & val2) { + dev_dbg(rt1318->component->dev, "Calibration done.\n"); + break; + } + count++; + if (count == chk_cnt) { + regmap_write(rt1318->regmap, RT1318_PWR_STA1, 0x0); + return RT1318_R0_CALIB_NOT_DONE; + } + } + regmap_write(rt1318->regmap, RT1318_PWR_STA1, 0x0); + regmap_read(rt1318->regmap, RT1318_R0_CMP_L_FLAG, &val); + regmap_read(rt1318->regmap, RT1318_R0_CMP_R_FLAG, &val2); + if ((val & 0x1) & (val2 & 0x1)) + return RT1318_R0_IN_RANGE; + else + return RT1318_R0_OUT_OF_RANGE; +} + +static void rt1318_calibration_work(struct work_struct *work) +{ + struct rt1318_priv *rt1318 = + container_of(work, struct rt1318_priv, cali_work); + int ret; + + if (rt1318->pdata.init_r0_l && rt1318->pdata.init_r0_r) + rt1318_r0_restore(rt1318); + else { + ret = rt1318_calibrate(rt1318); + if (ret == RT1318_R0_IN_RANGE) + rt1318_r0_calculate(rt1318); + dev_dbg(rt1318->component->dev, "Calibrate R0 result:%d\n", ret); + } +} + +static int rt1318_i2c_probe(struct i2c_client *i2c) +{ + struct rt1318_platform_data *pdata = dev_get_platdata(&i2c->dev); + struct rt1318_priv *rt1318; + int ret, val, val2, dev_id; + + rt1318 = devm_kzalloc(&i2c->dev, sizeof(struct rt1318_priv), + GFP_KERNEL); + if (!rt1318) + return -ENOMEM; + + i2c_set_clientdata(i2c, rt1318); + + if (pdata) + rt1318->pdata = *pdata; + else + rt1318_parse_dt(rt1318, &i2c->dev); + + rt1318->regmap = devm_regmap_init_i2c(i2c, &rt1318_regmap); + if (IS_ERR(rt1318->regmap)) { + ret = PTR_ERR(rt1318->regmap); + dev_err(&i2c->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + regmap_read(rt1318->regmap, RT1318_DEV_ID1, &val); + regmap_read(rt1318->regmap, RT1318_DEV_ID2, &val2); + dev_id = (val << 8) | val2; + if (dev_id != 0x6821) { + dev_err(&i2c->dev, + "Device with ID register %#x is not rt1318\n", + dev_id); + return -ENODEV; + } + + INIT_WORK(&rt1318->cali_work, rt1318_calibration_work); + + return devm_snd_soc_register_component(&i2c->dev, + &soc_component_dev_rt1318, rt1318_dai, ARRAY_SIZE(rt1318_dai)); +} + +struct i2c_driver rt1318_i2c_driver = { + .driver = { + .name = "rt1318", + .of_match_table = of_match_ptr(rt1318_of_match), + .acpi_match_table = ACPI_PTR(rt1318_acpi_match), + }, + .probe_new = rt1318_i2c_probe, + .id_table = rt1318_i2c_id, +}; +module_i2c_driver(rt1318_i2c_driver); + +MODULE_DESCRIPTION("ASoC RT1318 driver"); +MODULE_AUTHOR("Jack Yu jack.yu@realtek.com"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/rt1318.h b/sound/soc/codecs/rt1318.h new file mode 100644 index 000000000000..cec40b484216 --- /dev/null +++ b/sound/soc/codecs/rt1318.h @@ -0,0 +1,342 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * rt1318.h -- Platform data for RT1318 + * + * Copyright 2024 Realtek Semiconductor Corp. + */ +#include <sound/rt1318.h> + +#ifndef __RT1318_H__ +#define __RT1318_H__ + +struct rt1318_priv { + struct snd_soc_component *component; + struct rt1318_platform_data pdata; + struct work_struct cali_work; + struct regmap *regmap; + + unsigned int r0_l_integer; + unsigned int r0_l_factor; + unsigned int r0_r_integer; + unsigned int r0_r_factor; + int rt1318_init; + int rt1318_dvol; + int sysclk_src; + int sysclk; + int lrck; + int bclk; + int master; + int pll_src; + int pll_in; + int pll_out; +}; + +#define RT1318_PLL_INP_MAX 40000000 +#define RT1318_PLL_INP_MIN 256000 +#define RT1318_PLL_N_MAX 0x1ff +#define RT1318_PLL_K_MAX 0x1f +#define RT1318_PLL_M_MAX 0x1f + +#define RT1318_LRCLK_192000 192000 +#define RT1318_LRCLK_96000 96000 +#define RT1318_LRCLK_48000 48000 +#define RT1318_LRCLK_44100 44100 +#define RT1318_LRCLK_16000 16000 +#define RT1318_DVOL_STEP 383 + +#define RT1318_CLK1 0xc001 +#define RT1318_CLK2 0xc003 +#define RT1318_CLK3 0xc004 +#define RT1318_CLK4 0xc005 +#define RT1318_CLK5 0xc006 +#define RT1318_CLK6 0xc007 +#define RT1318_CLK7 0xc008 +#define RT1318_PWR_STA1 0xc121 +#define RT1318_SPK_VOL_TH 0xc130 +#define RT1318_TCON 0xc203 +#define RT1318_SRC_TCON 0xc204 +#define RT1318_TCON_RELATE 0xc206 +#define RT1318_DA_VOL_L_8 0xc20b +#define RT1318_DA_VOL_L_1_7 0xc20c +#define RT1318_DA_VOL_R_8 0xc20d +#define RT1318_DA_VOL_R_1_7 0xc20e +#define RT1318_FEEDBACK_PATH 0xc321 +#define RT1318_STP_TEMP_L 0xdb00 +#define RT1318_STP_SEL_L 0xdb08 +#define RT1318_STP_R0_EN_L 0xdb12 +#define RT1318_R0_CMP_L_FLAG 0xdb35 +#define RT1318_PRE_R0_L_24 0xdbb5 +#define RT1318_PRE_R0_L_23_16 0xdbb6 +#define RT1318_PRE_R0_L_15_8 0xdbb7 +#define RT1318_PRE_R0_L_7_0 0xdbb8 +#define RT1318_R0_L_24 0xdbc5 +#define RT1318_R0_L_23_16 0xdbc6 +#define RT1318_R0_L_15_8 0xdbc7 +#define RT1318_R0_L_7_0 0xdbc8 +#define RT1318_STP_SEL_R 0xdd08 +#define RT1318_STP_R0_EN_R 0xdd12 +#define RT1318_R0_CMP_R_FLAG 0xdd35 +#define RT1318_PRE_R0_R_24 0xddb5 +#define RT1318_PRE_R0_R_23_16 0xddb6 +#define RT1318_PRE_R0_R_15_8 0xddb7 +#define RT1318_PRE_R0_R_7_0 0xddb8 +#define RT1318_R0_R_24 0xddc5 +#define RT1318_R0_R_23_16 0xddc6 +#define RT1318_R0_R_15_8 0xddc7 +#define RT1318_R0_R_7_0 0xddc8 +#define RT1318_DEV_ID1 0xf012 +#define RT1318_DEV_ID2 0xf013 +#define RT1318_PLL1_K 0xf20d +#define RT1318_PLL1_M 0xf20f +#define RT1318_PLL1_N_8 0xf211 +#define RT1318_PLL1_N_7_0 0xf212 +#define RT1318_SINE_GEN0 0xf800 +#define RT1318_TDM_CTRL1 0xf900 +#define RT1318_TDM_CTRL2 0xf901 +#define RT1318_TDM_CTRL3 0xf902 +#define RT1318_TDM_CTRL9 0xf908 + + +/* Clock-1 (0xC001) */ +#define RT1318_PLLIN_MASK (0x7 << 4) +#define RT1318_PLLIN_BCLK0 (0x0 << 4) +#define RT1318_PLLIN_BCLK1 (0x1 << 4) +#define RT1318_PLLIN_RC (0x2 << 4) +#define RT1318_PLLIN_MCLK (0x3 << 4) +#define RT1318_PLLIN_SDW1 (0x4 << 4) +#define RT1318_PLLIN_SDW2 (0x5 << 4) +#define RT1318_PLLIN_SDW3 (0x6 << 4) +#define RT1318_PLLIN_SDW4 (0x7 << 4) +#define RT1318_SYSCLK_SEL_MASK (0x7 << 0) +#define RT1318_SYSCLK_BCLK (0x0 << 0) +#define RT1318_SYSCLK_SDW (0x1 << 0) +#define RT1318_SYSCLK_PLL2F (0x2 << 0) +#define RT1318_SYSCLK_PLL2B (0x3 << 0) +#define RT1318_SYSCLK_MCLK (0x4 << 0) +#define RT1318_SYSCLK_RC1 (0x5 << 0) +#define RT1318_SYSCLK_RC2 (0x6 << 0) +#define RT1318_SYSCLK_RC3 (0x7 << 0) +/* Clock-2 (0xC003) */ +#define RT1318_DIV_AP_MASK (0x3 << 4) +#define RT1318_DIV_AP_SFT 4 +#define RT1318_DIV_AP_DIV1 (0x0 << 4) +#define RT1318_DIV_AP_DIV2 (0x1 << 4) +#define RT1318_DIV_AP_DIV4 (0x2 << 4) +#define RT1318_DIV_AP_DIV8 (0x3 << 4) +#define RT1318_DIV_DAMOD_MASK (0x3 << 0) +#define RT1318_DIV_DAMOD_SFT 0 +#define RT1318_DIV_DAMOD_DIV1 (0x0 << 0) +#define RT1318_DIV_DAMOD_DIV2 (0x1 << 0) +#define RT1318_DIV_DAMOD_DIV4 (0x2 << 0) +#define RT1318_DIV_DAMOD_DIV8 (0x3 << 0) +/* Clock-3 (0xC004) */ +#define RT1318_AD_STO1_MASK (0x7 << 4) +#define RT1318_AD_STO1_SFT 4 +#define RT1318_AD_STO1_DIV1 (0x0 << 4) +#define RT1318_AD_STO1_DIV2 (0x1 << 4) +#define RT1318_AD_STO1_DIV4 (0x2 << 4) +#define RT1318_AD_STO1_DIV8 (0x3 << 4) +#define RT1318_AD_STO1_DIV16 (0x4 << 4) +#define RT1318_AD_STO2_MASK (0x7 << 0) +#define RT1318_AD_STO2_SFT 0 +#define RT1318_AD_STO2_DIV1 (0x0 << 0) +#define RT1318_AD_STO2_DIV2 (0x1 << 0) +#define RT1318_AD_STO2_DIV4 (0x2 << 0) +#define RT1318_AD_STO2_DIV8 (0x3 << 0) +#define RT1318_AD_STO2_DIV16 (0x4 << 0) +#define RT1318_AD_STO2_SFT 0 +/* Clock-4 (0xC005) */ +#define RT1318_AD_ANA_STO1_MASK (0x7 << 4) +#define RT1318_AD_ANA_STO1_SFT 4 +#define RT1318_AD_ANA_STO1_DIV1 (0x0 << 4) +#define RT1318_AD_ANA_STO1_DIV2 (0x1 << 4) +#define RT1318_AD_ANA_STO1_DIV4 (0x2 << 4) +#define RT1318_AD_ANA_STO1_DIV8 (0x3 << 4) +#define RT1318_AD_ANA_STO1_DIV16 (0x4 << 4) +#define RT1318_AD_ANA_STO2_MASK (0x7 << 0) +#define RT1318_AD_ANA_STO2_DIV1 (0x0 << 0) +#define RT1318_AD_ANA_STO2_DIV2 (0x1 << 0) +#define RT1318_AD_ANA_STO2_DIV4 (0x2 << 0) +#define RT1318_AD_ANA_STO2_DIV8 (0x3 << 0) +#define RT1318_AD_ANA_STO2_DIV16 (0x4 << 0) +#define RT1318_AD_ANA_STO2_SFT 0 +/* Clock-5 (0xC006) */ +#define RT1318_DIV_FIFO_IN_MASK (0x3 << 4) +#define RT1318_DIV_FIFO_IN_SFT 4 +#define RT1318_DIV_FIFO_IN_DIV1 (0x0 << 4) +#define RT1318_DIV_FIFO_IN_DIV2 (0x1 << 4) +#define RT1318_DIV_FIFO_IN_DIV4 (0x2 << 4) +#define RT1318_DIV_FIFO_IN_DIV8 (0x3 << 4) +#define RT1318_DIV_FIFO_OUT_MASK (0x3 << 0) +#define RT1318_DIV_FIFO_OUT_DIV1 (0x0 << 0) +#define RT1318_DIV_FIFO_OUT_DIV2 (0x1 << 0) +#define RT1318_DIV_FIFO_OUT_DIV4 (0x2 << 0) +#define RT1318_DIV_FIFO_OUT_DIV8 (0x3 << 0) +#define RT1318_DIV_FIFO_OUT_SFT 0 +/* Clock-6 (0xC007) */ +#define RT1318_DIV_NLMS_MASK (0x3 << 6) +#define RT1318_DIV_NLMS_SFT 6 +#define RT1318_DIV_NLMS_DIV1 (0x0 << 6) +#define RT1318_DIV_NLMS_DIV2 (0x1 << 6) +#define RT1318_DIV_NLMS_DIV4 (0x2 << 6) +#define RT1318_DIV_NLMS_DIV8 (0x3 << 6) +#define RT1318_DIV_AD_MONO_MASK (0x7 << 3) +#define RT1318_DIV_AD_MONO_SFT 3 +#define RT1318_DIV_AD_MONO_DIV1 (0x0 << 3) +#define RT1318_DIV_AD_MONO_DIV2 (0x1 << 3) +#define RT1318_DIV_AD_MONO_DIV4 (0x2 << 3) +#define RT1318_DIV_AD_MONO_DIV8 (0x3 << 3) +#define RT1318_DIV_AD_MONO_DIV16 (0x4 << 3) +#define RT1318_DIV_POST_G_MASK (0x7 << 0) +#define RT1318_DIV_POST_G_SFT 0 +#define RT1318_DIV_POST_G_DIV1 (0x0 << 0) +#define RT1318_DIV_POST_G_DIV2 (0x1 << 0) +#define RT1318_DIV_POST_G_DIV4 (0x2 << 0) +#define RT1318_DIV_POST_G_DIV8 (0x3 << 0) +#define RT1318_DIV_POST_G_DIV16 (0x4 << 0) +/* Power Status 1 (0xC121) */ +#define RT1318_PDB_CTRL_MASK (0x1) +#define RT1318_PDB_CTRL_LOW (0x0) +#define RT1318_PDB_CTRL_HIGH (0x1) +#define RT1318_PDB_CTRL_SFT 0 +/* SRC Tcon(0xc204) */ +#define RT1318_SRCIN_IN_SEL_MASK (0x3 << 6) +#define RT1318_SRCIN_IN_48K (0x0 << 6) +#define RT1318_SRCIN_IN_44P1 (0x1 << 6) +#define RT1318_SRCIN_IN_32K (0x2 << 6) +#define RT1318_SRCIN_IN_16K (0x3 << 6) +#define RT1318_SRCIN_F12288_MASK (0x3 << 4) +#define RT1318_SRCIN_TCON1 (0x0 << 4) +#define RT1318_SRCIN_TCON2 (0x1 << 4) +#define RT1318_SRCIN_TCON4 (0x2 << 4) +#define RT1318_SRCIN_TCON8 (0x3 << 4) +#define RT1318_SRCIN_DACLK_MASK (0x3 << 2) +#define RT1318_DACLK_TCON1 (0x0 << 2) +#define RT1318_DACLK_TCON2 (0x1 << 2) +#define RT1318_DACLK_TCON4 (0x2 << 2) +#define RT1318_DACLK_TCON8 (0x3 << 2) +/* R0 Compare Flag (0xDB35) */ +#define RT1318_R0_RANGE_MASK (0x1) +#define RT1318_R0_OUTOFRANGE (0x0) +#define RT1318_R0_INRANGE (0x1) +/* PLL internal setting (0xF20D), K value */ +#define RT1318_K_PLL1_MASK (0x1f << 0) +/* PLL internal setting (0xF20F), M value */ +#define RT1318_M_PLL1_MASK (0x1f << 0) +/* PLL internal setting (0xF211), N_8 value */ +#define RT1318_N_8_PLL1_MASK (0x1 << 0) +/* PLL internal setting (0xF212), N_7_0 value */ +#define RT1318_N_7_0_PLL1_MASK (0xff << 0) +/* TDM CTRL 1 (0xf900) */ +#define RT1318_TDM_BCLK_MASK (0x1 << 7) +#define RT1318_TDM_BCLK_NORM (0x0 << 7) +#define RT1318_TDM_BCLK_INV (0x1 << 7) +#define RT1318_I2S_FMT_MASK (0x7 << 0) +#define RT1318_FMT_I2S (0x0 << 0) +#define RT1318_FMT_LEFT_J (0x1 << 0) +#define RT1318_FMT_PCM_A_R (0x2 << 0) +#define RT1318_FMT_PCM_B_R (0x3 << 0) +#define RT1318_FMT_PCM_A_F (0x6 << 0) +#define RT1318_FMT_PCM_B_F (0x7 << 0) +#define RT1318_I2S_FMT_SFT 0 +/* TDM CTRL 2 (0xf901) */ +#define RT1318_I2S_CH_TX_MASK (0x3 << 6) +#define RT1318_I2S_CH_TX_2CH (0x0 << 6) +#define RT1318_I2S_CH_TX_4CH (0x1 << 6) +#define RT1318_I2S_CH_TX_6CH (0x2 << 6) +#define RT1318_I2S_CH_TX_8CH (0x3 << 6) +#define RT1318_I2S_CH_RX_MASK (0x3 << 4) +#define RT1318_I2S_CH_RX_2CH (0x0 << 4) +#define RT1318_I2S_CH_RX_4CH (0x1 << 4) +#define RT1318_I2S_CH_RX_6CH (0x2 << 4) +#define RT1318_I2S_CH_RX_8CH (0x3 << 4) +#define RT1318_I2S_DL_MASK 0x7 +#define RT1318_I2S_DL_SFT 0 +#define RT1318_I2S_DL_16 0x0 +#define RT1318_I2S_DL_20 0x1 +#define RT1318_I2S_DL_24 0x2 +#define RT1318_I2S_DL_32 0x3 +#define RT1318_I2S_DL_8 0x4 +/* TDM CTRL 3 (0xf902) */ +#define RT1318_I2S_TX_CHL_MASK (0x7 << 4) +#define RT1318_I2S_TX_CHL_SFT 4 +#define RT1318_I2S_TX_CHL_16 (0x0 << 4) +#define RT1318_I2S_TX_CHL_20 (0x1 << 4) +#define RT1318_I2S_TX_CHL_24 (0x2 << 4) +#define RT1318_I2S_TX_CHL_32 (0x3 << 4) +#define RT1318_I2S_TX_CHL_8 (0x4 << 4) +#define RT1318_I2S_RX_CHL_MASK (0x7 << 0) +#define RT1318_I2S_RX_CHL_SFT 0 +#define RT1318_I2S_RX_CHL_16 (0x0 << 0) +#define RT1318_I2S_RX_CHL_20 (0x1 << 0) +#define RT1318_I2S_RX_CHL_24 (0x2 << 0) +#define RT1318_I2S_RX_CHL_32 (0x3 << 0) +#define RT1318_I2S_RX_CHL_8 (0x4 << 0) +/* TDM CTRL 9 (0xf908) */ +#define RT1318_TDM_I2S_TX_L_DAC1_1_MASK (0x7 << 4) +#define RT1318_TDM_I2S_TX_R_DAC1_1_MASK 0x7 +#define RT1318_TDM_I2S_TX_L_DAC1_1_SFT 4 +#define RT1318_TDM_I2S_TX_R_DAC1_1_SFT 0 + +#define RT1318_REG_DISP_LEN 23 + +/* System Clock Source */ +enum { + RT1318_SCLK_S_BCLK, + RT1318_SCLK_S_SDW, + RT1318_SCLK_S_PLL2F, + RT1318_SCLK_S_PLL2B, + RT1318_SCLK_S_MCLK, + RT1318_SCLK_S_RC0, + RT1318_SCLK_S_RC1, + RT1318_SCLK_S_RC2, +}; + +/* PLL Source */ +enum { + RT1318_PLL_S_BCLK0, + RT1318_PLL_S_BCLK1, + RT1318_PLL_S_RC, + RT1318_PLL_S_MCLK, + RT1318_PLL_S_SDW_IN_PLL, + RT1318_PLL_S_SDW_0, + RT1318_PLL_S_SDW_1, + RT1318_PLL_S_SDW_2, +}; + +/* TDM channel */ +enum { + RT1318_2CH, + RT1318_4CH, + RT1318_6CH, + RT1318_8CH, +}; + +/* R0 calibration result */ +enum { + RT1318_R0_OUT_OF_RANGE, + RT1318_R0_IN_RANGE, + RT1318_R0_CALIB_NOT_DONE, +}; + +/* PLL pre-defined M/N/K */ + +struct pll_calc_map { + unsigned int pll_in; + unsigned int pll_out; + int k; + int n; + int m; + bool m_bp; + bool k_bp; +}; + +struct rt1318_pll_code { + bool m_bp; /* Indicates bypass m code or not. */ + bool k_bp; /* Indicates bypass k code or not. */ + int m_code; + int n_code; + int k_code; +}; + +#endif /* __RT1318_H__ */
On Tue, Jun 04, 2024 at 06:17:02AM +0000, Jack Yu wrote:
+static int rt1318_init_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
+{
- struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
- struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component);
- rt1318->rt1318_init = ucontrol->value.integer.value[0];
- if (rt1318->rt1318_init)
rt1318_reg_init(component);
- return 0;
+}
So this control resets the CODEC - what's the story here? Really it should be a boolean, and if you run mixer-test it'll tell you you're not returning 1 for value changes - please run mixer-test, there are a number of other errors that it will detect here.
+static int rt1318_dvol_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
+{
- struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
- struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component);
- rt1318->rt1318_dvol = ucontrol->value.integer.value[0];
- if (rt1318->rt1318_dvol <= RT1318_DVOL_STEP) {
regmap_write(rt1318->regmap, RT1318_DA_VOL_L_8, rt1318->rt1318_dvol >> 8);
regmap_write(rt1318->regmap, RT1318_DA_VOL_L_1_7, rt1318->rt1318_dvol & 0xff);
regmap_write(rt1318->regmap, RT1318_DA_VOL_R_8, rt1318->rt1318_dvol >> 8);
regmap_write(rt1318->regmap, RT1318_DA_VOL_R_1_7, rt1318->rt1318_dvol & 0xff);
This will happily accept negative values which you probably don't want.
- } else {
rt1318->rt1318_dvol = RT1318_DVOL_STEP;
dev_err(component->dev, "Unsupported volume gain\n");
The driver shouldn't allow userspace to spam the kernel log like this, it can be used to mask issues.
+static const struct snd_kcontrol_new rt1318_snd_controls[] = {
- SOC_SINGLE_EXT("rt1318 digital volume", SND_SOC_NOPM, 0, 383, 0,
rt1318_dvol_get, rt1318_dvol_put),
No need to include the part number in controls, users aren't going to care. The general style for ALSA controls is capitalised too.
-----Original Message----- From: Mark Brown broonie@kernel.org Sent: Tuesday, June 4, 2024 8:38 PM To: Jack Yu jack.yu@realtek.com Cc: lgirdwood@gmail.com; alsa-devel@alsa-project.org; lars@metafoo.de; Flove(HsinFu) flove@realtek.com; Oder Chiou oder_chiou@realtek.com; Shuming [范書銘] shumingf@realtek.com; Derek [方德義] derek.fang@realtek.com Subject: Re: [PATCH] ASoC: rt1318: Add RT1318 audio amplifier driver
On Tue, Jun 04, 2024 at 06:17:02AM +0000, Jack Yu wrote:
+static int rt1318_init_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol) {
- struct snd_soc_component *component =
snd_soc_kcontrol_component(kcontrol);
- struct rt1318_priv *rt1318 =
+snd_soc_component_get_drvdata(component);
- rt1318->rt1318_init = ucontrol->value.integer.value[0];
- if (rt1318->rt1318_init)
rt1318_reg_init(component);
- return 0;
+}
So this control resets the CODEC - what's the story here? Really it should be a boolean, and if you run mixer-test it'll tell you you're not returning 1 for value changes - please run mixer-test, there are a number of other errors that it will detect here.
I will remove this control since it's only for internal testing purpose.
+static int rt1318_dvol_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol) {
- struct snd_soc_component *component =
snd_soc_kcontrol_component(kcontrol);
- struct rt1318_priv *rt1318 =
+snd_soc_component_get_drvdata(component);
- rt1318->rt1318_dvol = ucontrol->value.integer.value[0];
- if (rt1318->rt1318_dvol <= RT1318_DVOL_STEP) {
regmap_write(rt1318->regmap, RT1318_DA_VOL_L_8,
rt1318->rt1318_dvol >> 8);
regmap_write(rt1318->regmap, RT1318_DA_VOL_L_1_7,
rt1318->rt1318_dvol & 0xff);
regmap_write(rt1318->regmap, RT1318_DA_VOL_R_8,
rt1318->rt1318_dvol >> 8);
regmap_write(rt1318->regmap, RT1318_DA_VOL_R_1_7,
+rt1318->rt1318_dvol & 0xff);
This will happily accept negative values which you probably don't want.
I'll do modification regarding to it.
- } else {
rt1318->rt1318_dvol = RT1318_DVOL_STEP;
dev_err(component->dev, "Unsupported volume gain\n");
The driver shouldn't allow userspace to spam the kernel log like this, it can be used to mask issues.
I'll remove this "else" condition.
+static const struct snd_kcontrol_new rt1318_snd_controls[] = {
- SOC_SINGLE_EXT("rt1318 digital volume", SND_SOC_NOPM, 0, 383, 0,
rt1318_dvol_get, rt1318_dvol_put),
No need to include the part number in controls, users aren't going to care. The general style for ALSA controls is capitalised too.
Will remove part number.
On 6/4/24 08:17, Jack Yu wrote:
This is the initial amplifier driver for rt1318.
There is already a driver for the rt1318 in SoundWire mode, contributed back in November 2022, this seems to be an I2S-based version.
Are all parts independent and interface-specific, or would there be opportunities to share common parts, if any?
-----Original Message----- From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Sent: Tuesday, June 4, 2024 11:29 PM To: Jack Yu jack.yu@realtek.com; broonie@kernel.org; lgirdwood@gmail.com Cc: alsa-devel@alsa-project.org; lars@metafoo.de; Flove(HsinFu) flove@realtek.com; Oder Chiou oder_chiou@realtek.com; Shuming [范書 銘] shumingf@realtek.com; Derek [方德義] derek.fang@realtek.com Subject: Re: [PATCH] ASoC: rt1318: Add RT1318 audio amplifier driver
External mail.
On 6/4/24 08:17, Jack Yu wrote:
This is the initial amplifier driver for rt1318.
There is already a driver for the rt1318 in SoundWire mode, contributed back in November 2022, this seems to be an I2S-based version.
Are all parts independent and interface-specific, or would there be opportunities to share common parts, if any?
The settings for i2s-based driver are quite different, so we prefer to use separate files for better management.
+struct rt1318_init_reg {
- u32 reg;
- u8 val;
- u8 delay;
+};
That looks like a 'struct reg_sequence' ?
+static struct rt1318_init_reg init_list[] = {
- { 0x0000C000, 0x01, 0},
- { 0x0000F20D, 0x00, 0},
- { 0x0000F212, 0x3E, 0},
...
+static int rt1318_reg_init(struct snd_soc_component *component) +{
- struct rt1318_priv *rt1318 = snd_soc_component_get_drvdata(component);
- int i;
- for (i = 0; i < rt1318_INIT_REG_LEN; i++) {
regmap_write(rt1318->regmap, init_list[i].reg, init_list[i].val);
mdelay(init_list[i].delay);
- }
- return 0;
+}
+static const struct reg_default rt1318_reg[] = {
- { 0xc000, 0x00 },
- { 0xc001, 0x43 },
- { 0xc003, 0x22 },
- { 0xc004, 0x44 },
...
- { 0xf20d, 0x00 },
- { 0xf212, 0x00 },
- { 0xf21a, 0x00 },
- { 0xf223, 0x40 },
And this looks to me as as a set of defaults patches by a reg_sequence - similar to what is done for rt1308 and rt1316.
Is there any opportunity to use regmap_register_patch() instead of open-coding the loop?
+struct rt1318_init_reg {
u32 reg;
u8 val;
u8 delay;
+};
That looks like a 'struct reg_sequence' ?
+static struct rt1318_init_reg init_list[] = {
{ 0x0000C000, 0x01, 0},
{ 0x0000F20D, 0x00, 0},
{ 0x0000F212, 0x3E, 0},
...
+static int rt1318_reg_init(struct snd_soc_component *component) {
struct rt1318_priv *rt1318 =
snd_soc_component_get_drvdata(component);
int i;
for (i = 0; i < rt1318_INIT_REG_LEN; i++) {
regmap_write(rt1318->regmap, init_list[i].reg,
init_list[i].val);
mdelay(init_list[i].delay);
}
return 0;
+}
+static const struct reg_default rt1318_reg[] = {
{ 0xc000, 0x00 },
{ 0xc001, 0x43 },
{ 0xc003, 0x22 },
{ 0xc004, 0x44 },
...
{ 0xf20d, 0x00 },
{ 0xf212, 0x00 },
{ 0xf21a, 0x00 },
{ 0xf223, 0x40 },
And this looks to me as as a set of defaults patches by a reg_sequence - similar to what is done for rt1308 and rt1316.
Is there any opportunity to use regmap_register_patch() instead of open-coding the loop?
OK, I'll include this modification in the v2 patch, thanks.
participants (3)
-
Jack Yu
-
Mark Brown
-
Pierre-Louis Bossart