On Tue, 25 Mar 2025 11:36:12 +0100, Shenghao Ding wrote:

For calibration data, basic version firmware does not contain any calibration addresses, it depends on calibration tool to convey the addresses to the driver. Since Alpha and Beta firmware, all the calibration addresses are saved into the firmware.

The description is same with the other changes in ASoC and that's *very* confusing. Please give the proper description that matches with the actual change. Also consider a better subject line, too. The same problem happened already a few times from your submitted series in the past. Please try to improve the process. thanks, Takashi

Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>

--- v1: - Add updating calibration addresses code into tas2781_apply_calib in case of Alpha and Beta firmware. --- sound/pci/hda/tas2781_hda_i2c.c | 30 ++++++++++++++++++++---------- 1 file changed, 20 insertions(+), 10 deletions(-)

diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index 50c5e5f26589..cb3d683013d9 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -558,28 +558,38 @@ static int tas2563_save_calibration(struct tasdevice_priv *tas_priv)

static void tas2781_apply_calib(struct tasdevice_priv *tas_priv) { - static const unsigned char page_array[CALIB_MAX] = { - 0x17, 0x18, 0x18, 0x13, 0x18, + struct calidata *cali_data = &tas_priv->cali_data; + struct cali_reg *r = &cali_data->cali_reg_array; + unsigned int cali_reg[CALIB_MAX] = { + TASDEVICE_REG(0, 0x17, 0x74), + TASDEVICE_REG(0, 0x18, 0x0c), + TASDEVICE_REG(0, 0x18, 0x14), + TASDEVICE_REG(0, 0x13, 0x70), + TASDEVICE_REG(0, 0x18, 0x7c), }; - static const unsigned char rgno_array[CALIB_MAX] = { - 0x74, 0x0c, 0x14, 0x70, 0x7c, - }; - int offset = 0; int i, j, rc; + int oft = 0; __be32 data;

+ if (tas_priv->dspbin_typ != TASDEV_BASIC) { + cali_reg[0] = r->r0_reg; + cali_reg[1] = r->invr0_reg; + cali_reg[2] = r->r0_low_reg; + cali_reg[3] = r->pow_reg; + cali_reg[4] = r->tlimit_reg; + } + for (i = 0; i < tas_priv->ndev; i++) { for (j = 0; j < CALIB_MAX; j++) { data = cpu_to_be32( - *(uint32_t *)&tas_priv->cali_data.data[offset]); + *(uint32_t *)&tas_priv->cali_data.data[oft]); rc = tasdevice_dev_bulk_write(tas_priv, i, - TASDEVICE_REG(0, page_array[j], rgno_array[j]), - (unsigned char *)&data, 4); + cali_reg[j], (unsigned char *)&data, 4); if (rc < 0) dev_err(tas_priv->dev, "chn %d calib %d bulk_wr err = %d\n", i, j, rc); - offset += 4; + oft += 4; } } } -- 2.34.1