[alsa-devel] [PATCH] model for alc883 to support FUJITSU Pi2515
Hi,
Please refer to [0003800] on the alsa mantis. There is no suitable model for Pi2515. This model is to support it.
Thanks! Best regards! Jiang,zhe
Signed-off-by: Jiang zhe zhe.jiang@intel.com --- alsa-driver-hg20080306/alsa-kernel/pci/hda/patch_realtek.c 2008-03-05 09:00:08.000000000 +0800 +++ b/alsa-kernel/pci/hda/patch_realtek.c 2008-03-06 15:20:46.000000000 +0800 @@ -202,6 +202,7 @@ enum { ALC888_6ST_DELL, ALC883_MITAC, ALC883_CLEVO_M720R, + ALC883_FUJITSU_PI2515, ALC883_AUTO, ALC883_MODEL_LAST, }; @@ -6484,6 +6485,14 @@ static struct hda_input_mux alc883_lenov }, };
+static struct hda_input_mux alc883_fujitsu_pi2515_capture_source = { + .num_items = 2, + .items = { + { "Mic", 0x0 }, + { "Int Mic", 0x1 }, + }, +}; + #define alc883_mux_enum_info alc_mux_enum_info #define alc883_mux_enum_get alc_mux_enum_get /* ALC883 has the ALC882-type input selection */ @@ -6673,6 +6682,33 @@ static struct snd_kcontrol_new alc883_cl { } /* end */ };
+static struct snd_kcontrol_new alc883_2ch_fujitsu_pi2515_mixer[] = { + HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0c, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Headphone Playback Switch", 0x0c, 2, HDA_INPUT), + HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0d, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Speaker Playback Switch", 0x0d, 2, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("Int Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), + HDA_CODEC_VOLUME("Int Mic Boost", 0x19, 0, HDA_INPUT), + HDA_CODEC_MUTE("Int Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), + HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT), + HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT), + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + /* .name = "Capture Source", */ + .name = "Input Source", + .count = 2, + .info = alc883_mux_enum_info, + .get = alc883_mux_enum_get, + .put = alc883_mux_enum_put, + }, + { } /* end */ +}; + static struct snd_kcontrol_new alc883_3ST_2ch_mixer[] = { HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), @@ -7220,6 +7256,20 @@ static struct hda_verb alc883_clevo_m720 { } /* end */ };
+static struct hda_verb alc883_2ch_fujitsu_pi2515_verbs[] = { + /* HP */ + {0x14, AC_VERB_SET_CONNECT_SEL, 0x00}, + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + /* Subwoofer */ + {0x15, AC_VERB_SET_CONNECT_SEL, 0x01}, + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + + /* enable unsolicited event */ + {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN}, + + { } /* end */ +}; + static struct hda_verb alc883_tagra_verbs[] = { {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, @@ -7423,6 +7473,25 @@ static void alc883_clevo_m720r_unsol_eve alc883_clevo_m720r_automute(codec); }
+/* toggle speaker-output according to the hp-jack state */ +static void alc883_2ch_fujitsu_pi2515_automute(struct hda_codec *codec) +{ + unsigned int present; + unsigned char bits; + + present = snd_hda_codec_read(codec, 0x14, 0, + AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; + bits = present ? HDA_AMP_MUTE : 0; + snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0, + HDA_AMP_MUTE, bits); +} + +static void alc883_2ch_fujitsu_pi2515_unsol_event(struct hda_codec *codec, unsigned int res) +{ + if ((res >> 26) == ALC880_HP_EVENT) + alc883_2ch_fujitsu_pi2515_automute(codec); +} + static void alc883_haier_w66_automute(struct hda_codec *codec) { unsigned int present; @@ -7661,6 +7730,7 @@ static const char *alc883_models[ALC883_ [ALC888_6ST_DELL] = "6stack-dell", [ALC883_MITAC] = "mitac", [ALC883_CLEVO_M720R] = "clevo-m720r", + [ALC883_FUJITSU_PI2515] = "fujitsu-pi2515", [ALC883_AUTO] = "auto", };
@@ -7706,6 +7776,7 @@ static struct snd_pci_quirk alc883_cfg_t SND_PCI_QUIRK(0x1558, 0, "Clevo laptop", ALC883_LAPTOP_EAPD), SND_PCI_QUIRK(0x15d9, 0x8780, "Supermicro PDSBA", ALC883_3ST_6ch), SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_MEDION), + SND_PCI_QUIRK(0x1734, 0x1108, "Fujitsu AMILO Pi2515", ALC883_FUJITSU_PI2515), SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo 101e", ALC883_LENOVO_101E_2ch), SND_PCI_QUIRK(0x17aa, 0x2085, "Lenovo NB0763", ALC883_LENOVO_NB0763), SND_PCI_QUIRK(0x17aa, 0x3bfc, "Lenovo NB0763", ALC883_LENOVO_NB0763), @@ -7950,6 +8021,18 @@ static struct alc_config_preset alc883_p .unsol_event = alc883_mitac_unsol_event, .init_hook = alc883_mitac_automute, }, + [ALC883_FUJITSU_PI2515] = { + .mixers = { alc883_2ch_fujitsu_pi2515_mixer }, + .init_verbs = { alc883_init_verbs, alc883_2ch_fujitsu_pi2515_verbs}, + .num_dacs = ARRAY_SIZE(alc883_dac_nids), + .dac_nids = alc883_dac_nids, + .dig_out_nid = ALC883_DIGOUT_NID, + .num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes), + .channel_mode = alc883_3ST_2ch_modes, + .input_mux = &alc883_fujitsu_pi2515_capture_source, + .unsol_event = alc883_2ch_fujitsu_pi2515_unsol_event, + .init_hook = alc883_2ch_fujitsu_pi2515_automute, + }, };
At Thu, 06 Mar 2008 15:31:30 +0800, Jiang zhe wrote:
Hi,
Please refer to [0003800] on the alsa mantis. There is no suitable model for Pi2515. This model is to support it.
Thanks! Best regards! Jiang,zhe
Signed-off-by: Jiang zhe zhe.jiang@intel.com
Thanks, applied to HG tree now.
BTW, could you either fix your MUA or use attachments at the next time? The embedded patches are often broken due to line-breaks.
Takashi
participants (2)
-
Jiang zhe
-
Takashi Iwai