The patch

sound: enable interrupt after dma buffer initialization

has been applied to the asoc tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks, Mark

From b61749a89f826eb61fc59794d9e4697bd246eb61 Mon Sep 17 00:00:00 2001

From: Yu Zhao yuzhao@google.com Date: Tue, 11 Sep 2018 15:14:04 -0600 Subject: [PATCH] sound: enable interrupt after dma buffer initialization

In snd_hdac_bus_init_chip(), we enable interrupt before snd_hdac_bus_init_cmd_io() initializing dma buffers. If irq has been acquired and irq handler uses the dma buffer, kernel may crash when interrupt comes in.

Fix the problem by postponing enabling irq after dma buffer initialization. And warn once on null dma buffer pointer during the initialization.

Reviewed-by: Takashi Iwai tiwai@suse.de Signed-off-by: Yu Zhao yuzhao@google.com Signed-off-by: Mark Brown broonie@kernel.org --- sound/hda/hdac_controller.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/sound/hda/hdac_controller.c b/sound/hda/hdac_controller.c index 560ec0986e1a..11057d9f84ec 100644 --- a/sound/hda/hdac_controller.c +++ b/sound/hda/hdac_controller.c @@ -40,6 +40,8 @@ static void azx_clear_corbrp(struct hdac_bus *bus) */ void snd_hdac_bus_init_cmd_io(struct hdac_bus *bus) { + WARN_ON_ONCE(!bus->rb.area); + spin_lock_irq(&bus->reg_lock); /* CORB set up */ bus->corb.addr = bus->rb.addr; @@ -479,13 +481,15 @@ bool snd_hdac_bus_init_chip(struct hdac_bus *bus, bool full_reset) /* reset controller */ azx_reset(bus, full_reset);

- /* initialize interrupts */ + /* clear interrupts */ azx_int_clear(bus); - azx_int_enable(bus);

/* initialize the codec command I/O */ snd_hdac_bus_init_cmd_io(bus);

+ /* enable interrupts after CORB/RIRB buffers are initialized above */ + azx_int_enable(bus); + /* program the position buffer */ if (bus->use_posbuf && bus->posbuf.addr) { snd_hdac_chip_writel(bus, DPLBASE, (u32)bus->posbuf.addr);