[alsa-devel] [PATCH v8 0/4] Add support for es8388 and hdmi audio on the rock2
This set of patches adds a machine driver for rk3288-based boards that have the built-in HDMI audio and a generic analog output. It also adds slave mode to the es8328 driver that currently only supported the master mode. Then, it adds the required DT definitions to link rockchip-i2s to the es8388 analog output and to hdmi audio.
This work is based on the initial work that was done by Sjoerd Simons sjoerd.simons@collabora.co.uk with some improvements, changes and more commits.
Changes in v8: - Fixed unmet direct dependencies for SND_SOC_IMX_ES8328 caused by patch 2/4 Changes in v7: - Added patch 2/4 - No longer select ES8328_I2C for RK3288_HDMI_ANALOG - Fixed DT regulator names in the DT for the Rock2 - Splitted pins for the headphone in the DT for the Rock2 Changes in v6: - Fixed bad error handling for gpio in rk3288_analog_hdmi.c - Removed message duplication in rk_hw_params(), in rk3288_analog_hdmi.c - Removed patch 1/4 (from the previous series), as it has been merged Changes in v5: - Fixed coding style issue in patch 2/4 (the switch case). - Moved the code for the master mode and the slave mode into the switch case for patch 2/4 - Fixed error handling for patch 3/4 Changes in v4: - Add support for multi codecs in the asoc machine driver, so the driver matches the hw architecture (analog and hdmi audio are connected on the same i2s line) - Renamed the driver to rk3288-hdmi-analog.c and changed its documentation - Add built-in support for hdmi audio in this driver - Add support for the property 'rockchip,routing'
Changes in v3: - Cosmetic changes in rockchip_es8388.c - Added missing email to MODULE_AUTHOR in rockchip_es8388.c Changes in v2: - Fixed wrong use of the data structure i2c_device_id - Fixed wrong dependencies for SND_SOC_ROCKCHIP_ES8388
Romain Perier (4): ASoC: es8328: Add support for slave mode ASoC: Allow to select ES8328_I2C and ES8328_SPI directly ASoC: rockchip: Add machine driver for RK3288 boards that use analog/HDMI arm: dts: Add support for ES8388 to the Radxa Rock 2
.../bindings/sound/rockchip,rk3288-hdmi-analog.txt | 36 +++ arch/arm/boot/dts/rk3288-rock2-som.dtsi | 2 +- arch/arm/boot/dts/rk3288-rock2-square.dts | 42 +++ sound/soc/codecs/Kconfig | 8 +- sound/soc/codecs/es8328.c | 20 +- sound/soc/fsl/Kconfig | 2 +- sound/soc/rockchip/Kconfig | 9 + sound/soc/rockchip/Makefile | 2 + sound/soc/rockchip/rk3288_hdmi_analog.c | 299 +++++++++++++++++++++ 9 files changed, 408 insertions(+), 12 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt create mode 100644 sound/soc/rockchip/rk3288_hdmi_analog.c
Currently, the function that changes the DAI format only supports master mode. Trying to use a slave mode exits the function with -EINVAL and leave the codec misconfigured. This commits adds support for enabling the slave mode.
Signed-off-by: Romain Perier romain.perier@collabora.com ---
Changes in v8: None Changes in v7: None Changes in v6: None Changes in v5: - Fixed coding style issue for the switch case - Moved the code for master mode and slave mode to the switch case
Changes in v4: None Changes in v3: None Changes in v2: None
sound/soc/codecs/es8328.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/sound/soc/codecs/es8328.c b/sound/soc/codecs/es8328.c index 37722194..3f84fbd 100644 --- a/sound/soc/codecs/es8328.c +++ b/sound/soc/codecs/es8328.c @@ -589,9 +589,21 @@ static int es8328_set_dai_fmt(struct snd_soc_dai *codec_dai, u8 dac_mode = 0; u8 adc_mode = 0;
- /* set master/slave audio interface */ - if ((fmt & SND_SOC_DAIFMT_MASTER_MASK) != SND_SOC_DAIFMT_CBM_CFM) + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + /* Master serial port mode, with BCLK generated automatically */ + snd_soc_update_bits(codec, ES8328_MASTERMODE, + ES8328_MASTERMODE_MSC, + ES8328_MASTERMODE_MSC); + break; + case SND_SOC_DAIFMT_CBS_CFS: + /* Slave serial port mode */ + snd_soc_update_bits(codec, ES8328_MASTERMODE, + ES8328_MASTERMODE_MSC, 0); + break; + default: return -EINVAL; + }
/* interface format */ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { @@ -620,10 +632,6 @@ static int es8328_set_dai_fmt(struct snd_soc_dai *codec_dai, snd_soc_update_bits(codec, ES8328_ADCCONTROL4, ES8328_ADCCONTROL4_ADCFORMAT_MASK, adc_mode);
- /* Master serial port mode, with BCLK generated automatically */ - snd_soc_update_bits(codec, ES8328_MASTERMODE, - ES8328_MASTERMODE_MSC, ES8328_MASTERMODE_MSC); - return 0; }
Currently, we have to select these symbols explictly via Kconfig, from another entry. If we plan to use generic audio drivers like simple-audio-card, the user need to be able to enable these symbols directly via the menuconfig.
This commit also fixes unmet dependencies to SND_SOC_IMX_ES8328 caused by these changes.
Signed-off-by: Romain Perier romain.perier@collabora.com ---
Changes in v8: - Fixed unmet direct dependencies reported by kbuilt test robot: "warning: (SND_SOC_IMX_ES8328 && SND_SOC_ALL_CODECS) selects SND_SOC_ES8328_I2C which has unmet direct dependencies (SOUND && !M68K && !UML && SND && SND_SOC && SND_SOC_ES8328) warning: (SND_SOC_IMX_ES8328 && SND_SOC_ALL_CODECS) selects SND_SOC_ES8328_SPI which has unmet direct dependencies (SOUND && !M68K && !UML && SND && SND_SOC && SND_SOC_ES8328) " Changes in v7: - Added this commit
sound/soc/codecs/Kconfig | 8 ++++---- sound/soc/fsl/Kconfig | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 9e1718a..cfa4233 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -528,12 +528,12 @@ config SND_SOC_ES8328 tristate "Everest Semi ES8328 CODEC"
config SND_SOC_ES8328_I2C - tristate - select SND_SOC_ES8328 + depends on SND_SOC_ES8328 + tristate "I2C support for Everest Semi ES8328 CODEC"
config SND_SOC_ES8328_SPI - tristate - select SND_SOC_ES8328 + depends on SND_SOC_ES8328 + tristate "SPI support for Everest Semi ES8328 CODEC"
config SND_SOC_GTM601 tristate 'GTM601 UMTS modem audio codec' diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index 37f9b62..0b914a1 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -244,7 +244,7 @@ config SND_SOC_IMX_WM8962
config SND_SOC_IMX_ES8328 tristate "SoC Audio support for i.MX boards with the ES8328 codec" - depends on OF && (I2C || SPI) + depends on OF && (I2C || SPI) && SND_SOC_ES8328 select SND_SOC_ES8328_I2C if I2C select SND_SOC_ES8328_SPI if SPI_MASTER select SND_SOC_IMX_PCM_DMA
The patch
ASoC: Allow to select ES8328_I2C and ES8328_SPI directly
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From aa00f2c8aff7b85f882b6fd1706fc4241046aba7 Mon Sep 17 00:00:00 2001
From: Romain Perier romain.perier@collabora.com Date: Fri, 3 Feb 2017 15:37:58 +0100 Subject: [PATCH] ASoC: Allow to select ES8328_I2C and ES8328_SPI directly
Currently, we have to select these symbols explictly via Kconfig, from another entry. If we plan to use generic audio drivers like simple-audio-card, the user need to be able to enable these symbols directly via the menuconfig.
This commit also fixes unmet dependencies to SND_SOC_IMX_ES8328 caused by these changes.
Signed-off-by: Romain Perier romain.perier@collabora.com Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/codecs/Kconfig | 8 ++++---- sound/soc/fsl/Kconfig | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 9e1718a8cb1c..cfa423338963 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -528,12 +528,12 @@ config SND_SOC_ES8328 tristate "Everest Semi ES8328 CODEC"
config SND_SOC_ES8328_I2C - tristate - select SND_SOC_ES8328 + depends on SND_SOC_ES8328 + tristate "I2C support for Everest Semi ES8328 CODEC"
config SND_SOC_ES8328_SPI - tristate - select SND_SOC_ES8328 + depends on SND_SOC_ES8328 + tristate "SPI support for Everest Semi ES8328 CODEC"
config SND_SOC_GTM601 tristate 'GTM601 UMTS modem audio codec' diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index 37f9b6201918..0b914a1ca8d2 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -244,7 +244,7 @@ config SND_SOC_IMX_WM8962
config SND_SOC_IMX_ES8328 tristate "SoC Audio support for i.MX boards with the ES8328 codec" - depends on OF && (I2C || SPI) + depends on OF && (I2C || SPI) && SND_SOC_ES8328 select SND_SOC_ES8328_I2C if I2C select SND_SOC_ES8328_SPI if SPI_MASTER select SND_SOC_IMX_PCM_DMA
The driver is used for Rockchip rk3288-based boards using a configurable analog output (can be an headphone) and the built-in HDMI audio output that is part of the RK3288 SoCs and use the Alsa HDMI codec driver. For some rk3288-based boards the analog output and the hdmi audio are plugged on the same i2s line, so we have to do the same in the driver by using a DAI link CPU to multicodecs. This configuration can be found for example on the Radxa Rock2 or the Firefly-RK3288.
This commit is based on the initial work that was done by Sjoerd Simons sjoerd.simons@collabora.com with some improvements.
Signed-off-by: Romain Perier romain.perier@collabora.com ---
Changes in v8: None Changes in v7: - No longer select SND_SOC_ES8328_I2C from kconfig (as this driver is dynamic and genric for analog outputs) Changes in v6: - Fixed bad error handling for gpios in the probe function - Replaced 'codec clock' by 'cpu clock' for set_sysclk for cpu_dai Changes in v5: - Fixed error handling for gpios in the probe function Changes in v4: - Added support for multi codecs in the asoc machine driver, so the driver matches the hw architecture (analog and hdmi audio are connected on the same i2s line) - Renamed the driver to rk3288-hdmi-analog.c - Changed some variables names due to this renaming - Changed the documentation - Added built-in support for hdmi audio in this driver - Added support for the property 'rockchip,routing'
Changes in v3: - Cosmetic changes - Added missing email to MODULE_AUTHOR Changes in v2: - Fixed wrong dependencies for SND_SOC_ROCKCHIP_ES8388, SND_SOC_ROCKCHIP_I2S was selected with unmet direct dependencies
.../bindings/sound/rockchip,rk3288-hdmi-analog.txt | 36 +++ sound/soc/rockchip/Kconfig | 9 + sound/soc/rockchip/Makefile | 2 + sound/soc/rockchip/rk3288_hdmi_analog.c | 299 +++++++++++++++++++++ 4 files changed, 346 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt create mode 100644 sound/soc/rockchip/rk3288_hdmi_analog.c
diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt b/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt new file mode 100644 index 0000000..2539e1d --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rockchip,rk3288-hdmi-analog.txt @@ -0,0 +1,36 @@ +ROCKCHIP RK3288 with HDMI and analog audio + +Required properties: +- compatible: "rockchip,rk3288-hdmi-analog" +- rockchip,model: The user-visible name of this sound complex +- rockchip,i2s-controller: The phandle of the Rockchip I2S controller that's + connected to the CODEC +- rockchip,audio-codec: The phandle of the analog audio codec. +- rockchip,routing: A list of the connections between audio components. + Each entry is a pair of strings, the first being the + connection's sink, the second being the connection's + source. For this driver the first string should always be + "Analog". + +Optionnal properties: +- rockchip,hp-en-gpios = The phandle of the GPIO that power up/down the + headphone (when the analog output is an headphone). +- rockchip,hp-det-gpios = The phandle of the GPIO that detects the headphone + (when the analog output is an headphone). +- pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt + +Example: + +sound { + compatible = "rockchip,rockchip-audio-es8388"; + rockchip,model = "Analog audio output"; + rockchip,i2s-controller = <&i2s>; + rockchip,audio-codec = <&es8388>; + rockchip,routing = "Analog", "LOUT2", + "Analog", "ROUT2"; + rockchip,hp-en-gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>; + rockchip,hp-det-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&headphone>; +}; + diff --git a/sound/soc/rockchip/Kconfig b/sound/soc/rockchip/Kconfig index c783f9a..e3ca1e9 100644 --- a/sound/soc/rockchip/Kconfig +++ b/sound/soc/rockchip/Kconfig @@ -42,6 +42,15 @@ config SND_SOC_ROCKCHIP_RT5645 Say Y or M here if you want to add support for SoC audio on Rockchip boards using the RT5645/RT5650 codec, such as Veyron.
+config SND_SOC_RK3288_HDMI_ANALOG + tristate "ASoC support multiple codecs for Rockchip RK3288 boards" + depends on SND_SOC_ROCKCHIP && I2C && GPIOLIB && CLKDEV_LOOKUP + select SND_SOC_ROCKCHIP_I2S + select SND_SOC_HDMI_CODEC + help + Say Y or M here if you want to add support for SoC audio on Rockchip + RK3288 boards using an analog output and the built-in HDMI audio. + config SND_SOC_RK3399_GRU_SOUND tristate "ASoC support multiple codecs for Rockchip RK3399 GRU boards" depends on SND_SOC_ROCKCHIP && I2C && GPIOLIB && CLKDEV_LOOKUP && SPI diff --git a/sound/soc/rockchip/Makefile b/sound/soc/rockchip/Makefile index 84e5c7c..991f91b 100644 --- a/sound/soc/rockchip/Makefile +++ b/sound/soc/rockchip/Makefile @@ -7,8 +7,10 @@ obj-$(CONFIG_SND_SOC_ROCKCHIP_SPDIF) += snd-soc-rockchip-spdif.o
snd-soc-rockchip-max98090-objs := rockchip_max98090.o snd-soc-rockchip-rt5645-objs := rockchip_rt5645.o +snd-soc-rk3288-hdmi-analog-objs := rk3288_hdmi_analog.o snd-soc-rk3399-gru-sound-objs := rk3399_gru_sound.o
obj-$(CONFIG_SND_SOC_ROCKCHIP_MAX98090) += snd-soc-rockchip-max98090.o obj-$(CONFIG_SND_SOC_ROCKCHIP_RT5645) += snd-soc-rockchip-rt5645.o +obj-$(CONFIG_SND_SOC_RK3288_HDMI_ANALOG) += snd-soc-rk3288-hdmi-analog.o obj-$(CONFIG_SND_SOC_RK3399_GRU_SOUND) += snd-soc-rk3399-gru-sound.o diff --git a/sound/soc/rockchip/rk3288_hdmi_analog.c b/sound/soc/rockchip/rk3288_hdmi_analog.c new file mode 100644 index 0000000..b60abf3 --- /dev/null +++ b/sound/soc/rockchip/rk3288_hdmi_analog.c @@ -0,0 +1,299 @@ +/* + * Rockchip machine ASoC driver for RK3288 boards that have an HDMI and analog + * audio output + * + * Copyright (c) 2016, Collabora Ltd. + * + * Authors: Sjoerd Simons sjoerd.simons@collabora.com, + * Romain Perier romain.perier@collabora.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see http://www.gnu.org/licenses/. + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/gpio.h> +#include <linux/of_gpio.h> +#include <sound/core.h> +#include <sound/jack.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include "rockchip_i2s.h" + +#define DRV_NAME "rk3288-snd-hdmi-analog" + +struct rk_drvdata { + int gpio_hp_en; + int gpio_hp_det; +}; + +static int rk_hp_power(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, int event) +{ + struct rk_drvdata *machine = snd_soc_card_get_drvdata(w->dapm->card); + + if (!gpio_is_valid(machine->gpio_hp_en)) + return 0; + + gpio_set_value_cansleep(machine->gpio_hp_en, + SND_SOC_DAPM_EVENT_ON(event)); + + return 0; +} + +static struct snd_soc_jack headphone_jack; +static struct snd_soc_jack_pin headphone_jack_pins[] = { + { + .pin = "Analog", + .mask = SND_JACK_HEADPHONE + }, +}; + +static const struct snd_soc_dapm_widget rk_dapm_widgets[] = { + SND_SOC_DAPM_HP("Analog", rk_hp_power), + SND_SOC_DAPM_LINE("HDMI", NULL), +}; + +static const struct snd_kcontrol_new rk_mc_controls[] = { + SOC_DAPM_PIN_SWITCH("Analog"), + SOC_DAPM_PIN_SWITCH("HDMI"), +}; + +static int rk_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + int ret = 0; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + int mclk; + + switch (params_rate(params)) { + case 8000: + case 16000: + case 24000: + case 32000: + case 48000: + case 64000: + case 96000: + mclk = 12288000; + break; + case 11025: + case 22050: + case 44100: + case 88200: + mclk = 11289600; + break; + default: + return -EINVAL; + } + + ret = snd_soc_dai_set_sysclk(cpu_dai, 0, mclk, + SND_SOC_CLOCK_OUT); + + if (ret && ret != -ENOTSUPP) { + dev_err(codec_dai->dev, "Can't set cpu clock %d\n", ret); + return ret; + } + + ret = snd_soc_dai_set_sysclk(codec_dai, 0, mclk, + SND_SOC_CLOCK_IN); + if (ret && ret != -ENOTSUPP) { + dev_err(codec_dai->dev, "Can't set codec clock %d\n", ret); + return ret; + } + + return 0; +} + +static struct snd_soc_jack_gpio rk_hp_jack_gpio = { + .name = "Headphone detection", + .report = SND_JACK_HEADPHONE, + .debounce_time = 150 +}; + +static int rk_init(struct snd_soc_pcm_runtime *runtime) +{ + struct rk_drvdata *machine = snd_soc_card_get_drvdata(runtime->card); + + /* Enable Headset Jack detection */ + if (gpio_is_valid(machine->gpio_hp_det)) { + snd_soc_card_jack_new(runtime->card, "Headphone Jack", + SND_JACK_HEADPHONE, &headphone_jack, + headphone_jack_pins, + ARRAY_SIZE(headphone_jack_pins)); + rk_hp_jack_gpio.gpio = machine->gpio_hp_det; + snd_soc_jack_add_gpios(&headphone_jack, 1, &rk_hp_jack_gpio); + } + + return 0; +} + +static struct snd_soc_ops rk_ops = { + .hw_params = rk_hw_params, +}; + +static struct snd_soc_dai_link_component rk_codecs[] = { + { }, + { + .name = "hdmi-audio-codec.2.auto", + .dai_name = "hdmi-hifi.0", + }, +}; + +static struct snd_soc_dai_link rk_dailink = { + .name = "Codecs", + .stream_name = "Audio", + .init = rk_init, + .ops = &rk_ops, + .codecs = rk_codecs, + .num_codecs = ARRAY_SIZE(rk_codecs), + /* Set codecs as slave */ + .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS, +}; + +static struct snd_soc_card snd_soc_card_rk = { + .name = "ROCKCHIP-I2S", + .dai_link = &rk_dailink, + .num_links = 1, + .num_aux_devs = 0, + .dapm_widgets = rk_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(rk_dapm_widgets), + .controls = rk_mc_controls, + .num_controls = ARRAY_SIZE(rk_mc_controls), +}; + +static int snd_rk_mc_probe(struct platform_device *pdev) +{ + int ret = 0; + struct snd_soc_card *card = &snd_soc_card_rk; + struct device_node *np = pdev->dev.of_node; + struct rk_drvdata *machine; + struct of_phandle_args args; + + machine = devm_kzalloc(&pdev->dev, sizeof(struct rk_drvdata), + GFP_KERNEL); + if (!machine) + return -ENOMEM; + + card->dev = &pdev->dev; + + machine->gpio_hp_det = of_get_named_gpio(np, + "rockchip,hp-det-gpios", 0); + if (!gpio_is_valid(machine->gpio_hp_det) && machine->gpio_hp_det != -ENODEV) + return machine->gpio_hp_det; + + machine->gpio_hp_en = of_get_named_gpio(np, + "rockchip,hp-en-gpios", 0); + if (!gpio_is_valid(machine->gpio_hp_en) && machine->gpio_hp_en != -ENODEV) + return machine->gpio_hp_en; + + if (gpio_is_valid(machine->gpio_hp_en)) { + ret = devm_gpio_request_one(&pdev->dev, machine->gpio_hp_en, + GPIOF_OUT_INIT_LOW, "hp_en"); + if (ret) { + dev_err(card->dev, "cannot get hp_en gpio\n"); + return ret; + } + } + + ret = snd_soc_of_parse_card_name(card, "rockchip,model"); + if (ret) { + dev_err(card->dev, "SoC parse card name failed %d\n", ret); + return ret; + } + + rk_dailink.codecs[0].of_node = of_parse_phandle(np, + "rockchip,audio-codec", + 0); + if (!rk_dailink.codecs[0].of_node) { + dev_err(&pdev->dev, + "Property 'rockchip,audio-codec' missing or invalid\n"); + return -EINVAL; + } + ret = of_parse_phandle_with_fixed_args(np, "rockchip,audio-codec", + 0, 0, &args); + if (ret) { + dev_err(&pdev->dev, + "Unable to parse property 'rockchip,audio-codec'\n"); + return ret; + } + + ret = snd_soc_get_dai_name(&args, &rk_dailink.codecs[0].dai_name); + if (ret) { + dev_err(&pdev->dev, "Unable to get codec_dai_name\n"); + return ret; + } + + rk_dailink.cpu_of_node = of_parse_phandle(np, "rockchip,i2s-controller", + 0); + if (!rk_dailink.cpu_of_node) { + dev_err(&pdev->dev, + "Property 'rockchip,i2s-controller' missing or invalid\n"); + return -EINVAL; + } + + rk_dailink.platform_of_node = rk_dailink.cpu_of_node; + + ret = snd_soc_of_parse_audio_routing(card, "rockchip,routing"); + if (ret) { + dev_err(&pdev->dev, + "Unable to parse 'rockchip,routing' property\n"); + return ret; + } + + snd_soc_card_set_drvdata(card, machine); + + ret = devm_snd_soc_register_card(&pdev->dev, card); + if (ret == -EPROBE_DEFER) + return -EPROBE_DEFER; + if (ret) { + dev_err(&pdev->dev, + "Soc register card failed %d\n", ret); + return ret; + } + + platform_set_drvdata(pdev, card); + + return ret; +} + +static const struct of_device_id rockchip_sound_of_match[] = { + { .compatible = "rockchip,rk3288-hdmi-analog", }, + {}, +}; + +MODULE_DEVICE_TABLE(of, rockchip_sound_of_match); + +static struct platform_driver rockchip_sound_driver = { + .probe = snd_rk_mc_probe, + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + .pm = &snd_soc_pm_ops, + .of_match_table = rockchip_sound_of_match, + }, +}; + +module_platform_driver(rockchip_sound_driver); + +MODULE_AUTHOR("Sjoerd Simons sjoerd.simons@collabora.com"); +MODULE_DESCRIPTION("Rockchip RK3288 machine ASoC driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" DRV_NAME);
This commit adds the DT definition of the es8388 i2c device found at address 0x10. It also adds the definition for connecting the Rockchip I2S to the es8388 analog output.
This commit is based on the initial work that was done by Sjoerd Simons sjoerd.simons@collabora.com with some improvements.
Signed-off-by: Romain Perier romain.perier@collabora.com ---
Changes in v8: None Changes in v7: - Added a new label for vccio_codec - Use vccio_codec instead of vcca_codec - Splitted headphone pins into hp_det and phone_ctl Changes in v6: None Changes in v5: None Changes in v4: - Updated to the new DT binding - Added the property 'rockchip,routing' - Renamed the node sound_es8388 to sound_i2s Changes in v3: None Changes in v2: None
arch/arm/boot/dts/rk3288-rock2-som.dtsi | 2 +- arch/arm/boot/dts/rk3288-rock2-square.dts | 42 +++++++++++++++++++++++++++++++ 2 files changed, 43 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index b25ba80..c4d320c 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -136,7 +136,7 @@ regulator-always-on; };
- vcc_io: REG2 { + vcc_io: vccio_codec: REG2 { regulator-name = "VCC_IO"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index dd3ad2e..f693c39 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -86,6 +86,19 @@ #sound-dai-cells = <0>; };
+ sound_i2s { + compatible = "rockchip,rk3288-hdmi-analog"; + rockchip,model = "I2S"; + rockchip,i2s-controller = <&i2s>; + rockchip,audio-codec = <&es8388>; + rockchip,routing = "Analog", "LOUT2", + "Analog", "ROUT2"; + rockchip,hp-en-gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>; + rockchip,hp-det-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&phone_ctl>, <&hp_det>; + }; + sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&hym8563>; @@ -173,10 +186,29 @@ }; };
+&i2c2 { + status = "okay"; + + es8388: es8388@10 { + compatible = "everest,es8388", "everest,es8328"; + reg = <0x10>; + AVDD-supply = <&vccio_codec>; + DVDD-supply = <&vccio_codec>; + HPVDD-supply = <&vccio_codec>; + PVDD-supply = <&vccio_codec>; + clocks = <&cru SCLK_I2S0_OUT>; + clock-names = "i2s_clk_out"; + }; +}; + &i2c5 { status = "okay"; };
+&i2s { + status = "okay"; +}; + &pinctrl { ir { ir_int: ir-int { @@ -190,6 +222,16 @@ }; };
+ headphone { + hp_det: hp-det { + rockchip,pins = <7 7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + phone_ctl: phone-ctl { + rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + usb { host_vbus_drv: host-vbus-drv { rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
Hi Romain,
Am Freitag, 3. Februar 2017, 15:38:00 CET schrieb Romain Perier:
This commit adds the DT definition of the es8388 i2c device found at address 0x10. It also adds the definition for connecting the Rockchip I2S to the es8388 analog output.
This commit is based on the initial work that was done by Sjoerd Simons sjoerd.simons@collabora.com with some improvements.
Signed-off-by: Romain Perier romain.perier@collabora.com
applied for 4.12, with the following changes:
- subject: ARM: dts: rockchip: ... (ARM upper case + "rockchip:") - sound-i2s (dash instead of underscore, better alphabetical ordering) - es8388: dropped clock-names property, the driver only ever grabs the first clock and clock-names is not part of the binding
Heiko
participants (3)
-
Heiko Stuebner
-
Mark Brown
-
Romain Perier