[alsa-devel] [PATCH v2] ASoC: fsl_sai: Fix one bug for hardware limitation.
This is maybe one bug or a limitation of the hardware that the {T,R}CR2's Synchronous Mode bits must be set as late as possible, or the SAI device maybe hanged up, and there has not any explaination about this limitation in the SAI Data Sheet.
And the {T,R}CR2's Synchronous Mode bits must be set at the same time whether for Tx or Rx stream.
Signed-off-by: Xiubo Li Li.Xiubo@freescale.com --- sound/soc/fsl/fsl_sai.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index af80246..2ece147 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -145,7 +145,6 @@ static int fsl_sai_set_dai_fmt_tr(struct snd_soc_dai *cpu_dai, switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_I2S: val_cr4 |= FSL_SAI_CR4_FSE; - val_cr4 |= FSL_SAI_CR4_FSP; break; default: return -EINVAL; @@ -185,9 +184,6 @@ static int fsl_sai_set_dai_fmt_tr(struct snd_soc_dai *cpu_dai, return -EINVAL; }
- if (fsl_dir == FSL_FMT_RECEIVER) - val_cr2 |= FSL_SAI_CR2_SYNC; - sai_writel(sai, val_cr2, sai->base + reg_cr2); sai_writel(sai, val_cr4, sai->base + reg_cr4);
@@ -253,6 +249,7 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream, val_cr5 |= FSL_SAI_CR5_WNW(word_width); val_cr5 |= FSL_SAI_CR5_W0W(word_width);
+ val_cr5 &= ~FSL_SAI_CR5_FBT_MASK; if (sai->big_endian_data) val_cr5 |= FSL_SAI_CR5_FBT(word_width - 1); else @@ -272,7 +269,15 @@ static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd, struct snd_soc_dai *cpu_dai) { struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai); - u32 tcsr, rcsr, val_cr3, reg_cr3; + u32 tcsr, rcsr, val_cr2, val_cr3, reg_cr3; + + val_cr2 = sai_readl(sai, sai->base + FSL_SAI_TCR2); + val_cr2 &= ~FSL_SAI_CR2_SYNC; + sai_writel(sai, val_cr2, sai->base + FSL_SAI_TCR2); + + val_cr2 = sai_readl(sai, sai->base + FSL_SAI_RCR2); + val_cr2 |= FSL_SAI_CR2_SYNC; + sai_writel(sai, val_cr2, sai->base + FSL_SAI_RCR2);
tcsr = sai_readl(sai, sai->base + FSL_SAI_TCSR); rcsr = sai_readl(sai, sai->base + FSL_SAI_RCSR);
Revert the SAI's endianess for fifo data to/from DMA engine.
Signed-off-by: Xiubo Li Li.Xiubo@freescale.com --- sound/soc/fsl/fsl_sai.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index 2ece147..5d38a67 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -138,9 +138,9 @@ static int fsl_sai_set_dai_fmt_tr(struct snd_soc_dai *cpu_dai, val_cr4 = sai_readl(sai, sai->base + reg_cr4);
if (sai->big_endian_data) - val_cr4 |= FSL_SAI_CR4_MF; - else val_cr4 &= ~FSL_SAI_CR4_MF; + else + val_cr4 |= FSL_SAI_CR4_MF;
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_I2S: @@ -251,9 +251,9 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
val_cr5 &= ~FSL_SAI_CR5_FBT_MASK; if (sai->big_endian_data) - val_cr5 |= FSL_SAI_CR5_FBT(word_width - 1); - else val_cr5 |= FSL_SAI_CR5_FBT(0); + else + val_cr5 |= FSL_SAI_CR5_FBT(word_width - 1);
val_cr4 |= FSL_SAI_CR4_FRSZ(channels); val_mr = ~0UL - ((1 << channels) - 1);
On Tue, Dec 31, 2013 at 03:33:21PM +0800, Xiubo Li wrote:
This is maybe one bug or a limitation of the hardware that the {T,R}CR2's Synchronous Mode bits must be set as late as possible, or the SAI device maybe hanged up, and there has not any explaination about this limitation in the SAI Data Sheet.
Applied, thanks.
participants (2)
-
Mark Brown
-
Xiubo Li