All DAPM input and output pins of the wm8750 are either used in the card's DAPM routing table or are marked as not connected.

Set the fully_routed flag of the card instead of manually marking the unused inputs and outputs as not connected. This makes the code a bit shorter and cleaner.

Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/samsung/jive_wm8750.c | 18 +----------------- 1 file changed, 1 insertion(+), 17 deletions(-)

diff --git a/sound/soc/samsung/jive_wm8750.c b/sound/soc/samsung/jive_wm8750.c index 6c3b359..7fcb51f 100644 --- a/sound/soc/samsung/jive_wm8750.c +++ b/sound/soc/samsung/jive_wm8750.c @@ -83,22 +83,6 @@ static struct snd_soc_ops jive_ops = { .hw_params = jive_hw_params, };

-static int jive_wm8750_init(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_soc_codec *codec = rtd->codec; - struct snd_soc_dapm_context *dapm = &codec->dapm; - - /* These endpoints are not being used. */ - snd_soc_dapm_nc_pin(dapm, "LINPUT2"); - snd_soc_dapm_nc_pin(dapm, "RINPUT2"); - snd_soc_dapm_nc_pin(dapm, "LINPUT3"); - snd_soc_dapm_nc_pin(dapm, "RINPUT3"); - snd_soc_dapm_nc_pin(dapm, "OUT3"); - snd_soc_dapm_nc_pin(dapm, "MONO"); - - return 0; -} - static struct snd_soc_dai_link jive_dai = { .name = "wm8750", .stream_name = "WM8750", @@ -106,7 +90,6 @@ static struct snd_soc_dai_link jive_dai = { .codec_dai_name = "wm8750-hifi", .platform_name = "s3c2412-i2s", .codec_name = "wm8750.0-001a", - .init = jive_wm8750_init, .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS, .ops = &jive_ops, @@ -123,6 +106,7 @@ static struct snd_soc_card snd_soc_machine_jive = { .num_dapm_widgets = ARRAY_SIZE(wm8750_dapm_widgets), .dapm_routes = audio_map, .num_dapm_routes = ARRAY_SIZE(audio_map), + .fully_routed = true, };

static struct platform_device *jive_snd_device;