[alsa-devel] [PATCH] ALSA: hda - Set TLV_DB_SCALE_MUTE bit for cx5051 vmaster
Conexnat HD-audio driver has a workaround for cx5051 (aka CX20561) chip to add fake mute controls to each amp (commit 3868137e). This implies the minimum-as-mute TLV bit in TLV for each corresponding control. Meanwhile we build the virtual master from these, but the TLV bit is missing, even though the slaves have it.
This patch simply adds the missing TLV_DB_SCALE_MUTE bit for vmaster, as already done in patch_sigmatel.c.
Signed-off-by: Takashi Iwai tiwai@suse.de --- sound/pci/hda/patch_conexant.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 7627a69ca6d7..6f2fa838b635 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -26,6 +26,7 @@ #include <linux/module.h> #include <sound/core.h> #include <sound/jack.h> +#include <sound/tlv.h>
#include "hda_codec.h" #include "hda_local.h" @@ -859,6 +860,11 @@ static int patch_conexant_auto(struct hda_codec *codec) if (err < 0) goto error;
+ if (codec->vendor_id == 0x14f15051) { + /* minimum value is actually mute */ + spec->gen.vmaster_tlv[3] |= TLV_DB_SCALE_MUTE; + } + codec->patch_ops = cx_auto_patch_ops;
/* Some laptops with Conexant chips show stalls in S3 resume,
Conexnat HD-audio driver has a workaround for cx5051 (aka CX20561) chip to add fake mute controls to each amp (commit 3868137e). This implies the minimum-as-mute TLV bit in TLV for each corresponding control. Meanwhile we build the virtual master from these, but the TLV bit is missing, even though the slaves have it.
This patch simply adds the missing TLV_DB_SCALE_MUTE bit for vmaster, as already done in patch_sigmatel.c.
Signed-off-by: Takashi Iwai tiwai@suse.de
sound/pci/hda/patch_conexant.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/sound/pci/hda/patch_conexant.c
b/sound/pci/hda/patch_conexant.c
index 7627a69ca6d7..6f2fa838b635 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -26,6 +26,7 @@ #include <linux/module.h> #include <sound/core.h> #include <sound/jack.h> +#include <sound/tlv.h>
#include "hda_codec.h" #include "hda_local.h" @@ -859,6 +860,11 @@ static int patch_conexant_auto(struct hda_codec
*codec)
if (err < 0) goto error;
if (codec->vendor_id == 0x14f15051) {/* minimum value is actually mute */spec->gen.vmaster_tlv[3] |= TLV_DB_SCALE_MUTE;}codec->patch_ops = cx_auto_patch_ops; /* Some laptops with Conexant chips show stalls in S3 resume,--
Does this mean that when there is no hardware mute switch, the driver create a fake one using mindB of volume as mute ?
But this mean that the volume control and mute are not independent anymore, just like those pulseaudio volume controls, volume always change to zero after mute and unmute
At Sat, 16 Aug 2014 10:34:26 +0800, Raymond Yau wrote:
Conexnat HD-audio driver has a workaround for cx5051 (aka CX20561) chip to add fake mute controls to each amp (commit 3868137e). This implies the minimum-as-mute TLV bit in TLV for each corresponding control. Meanwhile we build the virtual master from these, but the TLV bit is missing, even though the slaves have it.
This patch simply adds the missing TLV_DB_SCALE_MUTE bit for vmaster, as already done in patch_sigmatel.c.
Signed-off-by: Takashi Iwai tiwai@suse.de
sound/pci/hda/patch_conexant.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/sound/pci/hda/patch_conexant.c
b/sound/pci/hda/patch_conexant.c
index 7627a69ca6d7..6f2fa838b635 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -26,6 +26,7 @@ #include <linux/module.h> #include <sound/core.h> #include <sound/jack.h> +#include <sound/tlv.h>
#include "hda_codec.h" #include "hda_local.h" @@ -859,6 +860,11 @@ static int patch_conexant_auto(struct hda_codec
*codec)
if (err < 0) goto error;
if (codec->vendor_id == 0x14f15051) {/* minimum value is actually mute */spec->gen.vmaster_tlv[3] |= TLV_DB_SCALE_MUTE;}codec->patch_ops = cx_auto_patch_ops; /* Some laptops with Conexant chips show stalls in S3 resume,--
Does this mean that when there is no hardware mute switch, the driver create a fake one using mindB of volume as mute ?
The fake mutes are, yes.
But this mean that the volume control and mute are not independent anymore, just like those pulseaudio volume controls, volume always change to zero after mute and unmute
No, the mute controls are handled individually. And, this commit itself isn't about the fake mute implementations. It just give the hint to TLV.
Takashi
Conexnat HD-audio driver has a workaround for cx5051 (aka CX20561) chip to add fake mute controls to each amp (commit 3868137e). This implies the minimum-as-mute TLV bit in TLV for each corresponding control. Meanwhile we build the virtual master from these, but the TLV bit is missing, even though the slaves have it.
This patch simply adds the missing TLV_DB_SCALE_MUTE bit for vmaster, as already done in patch_sigmatel.c.
Signed-off-by: Takashi Iwai tiwai@suse.de
sound/pci/hda/patch_conexant.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/sound/pci/hda/patch_conexant.c
b/sound/pci/hda/patch_conexant.c
index 7627a69ca6d7..6f2fa838b635 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -26,6 +26,7 @@ #include <linux/module.h> #include <sound/core.h> #include <sound/jack.h> +#include <sound/tlv.h>
#include "hda_codec.h" #include "hda_local.h" @@ -859,6 +860,11 @@ static int patch_conexant_auto(struct hda_codec
*codec)
if (err < 0) goto error;
if (codec->vendor_id == 0x14f15051) {/* minimum value is actually mute */spec->gen.vmaster_tlv[3] |= TLV_DB_SCALE_MUTE;}codec->patch_ops = cx_auto_patch_ops; /* Some laptops with Conexant chips show stalls in S3 resume,--
Does this mean that when there is no hardware mute switch, the driver create a fake one using mindB of volume as mute ?
The fake mutes are, yes.
But this mean that the volume control and mute are not independent
anymore,
just like those pulseaudio volume controls, volume always change to
zero
after mute and unmute
No, the mute controls are handled individually. And, this commit itself isn't about the fake mute implementations. It just give the hint to TLV.
If the codec support mute in default amp out caps of afg node, should the driver still use min as mute for the virtual master since all slaves have real mute switch
Why the driver add fake mute switch when the hardware real mute switches ?
https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/?id=3868...
https://launchpadlibrarian.net/182545365/AlsaInfo.txt
Codec: IDT 92HD73C1X5 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x111d7675 Subsystem Id: 0x102802eb Revision Id: 0x100103 No Modem Function Group found Default PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
Node 0x15 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L Control: name="PCM Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="PCM Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="92HD73C1X5 Analog", type="Audio", device=0 Amp-Out caps: N/A Amp-Out vals: [0x80 0x80] Converter: stream=8, channel=0 Power states: Power: setting=D0, actual=D0 Delay: 13 samples Node 0x16 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: N/A Amp-Out vals: [0xab 0xab] Converter: stream=8, channel=0 Power states: Power: setting=D0, actual=D0 Delay: 13 samples Node 0x17 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: N/A Amp-Out vals: [0xab 0xab] Converter: stream=8, channel=0 Power states: Power: setting=D0, actual=D0 Delay: 13 samples
control.1 { iface MIXER name 'PCM Playback Volume' value.0 55 value.1 55 comment { access 'read write' type INTEGER count 2 range '0 - 127' dbmin -9525 dbmax 0 dbvalue.0 -5400 dbvalue.1 -5400 } } control.2 { iface MIXER name 'PCM Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.3 { iface MIXER name 'Headphone Playback Volume' value.0 127 value.1 127 comment { access 'read write' type INTEGER count 2 range '0 - 127' dbmin -9525 dbmax 0 dbvalue.0 0 dbvalue.1 0 } } control.4 { iface MIXER name 'Headphone Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.5 { iface MIXER name 'Speaker Playback Volume' value.0 127 value.1 127 comment { access 'read write' type INTEGER count 2 range '0 - 127' dbmin -9525 dbmax 0 dbvalue.0 0 dbvalue.1 0 } } control.6 { iface MIXER name 'Speaker Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } }
control.17 { iface MIXER name 'Master Playback Volume' value 43 comment { access 'read write' type INTEGER count 1 range '0 - 127' dbmin -9999999 dbmax 0 dbvalue.0 -6300 } }
At Tue, 19 Aug 2014 13:16:47 +0800, Raymond Yau wrote:
Conexnat HD-audio driver has a workaround for cx5051 (aka CX20561) chip to add fake mute controls to each amp (commit 3868137e). This implies the minimum-as-mute TLV bit in TLV for each corresponding control. Meanwhile we build the virtual master from these, but the TLV bit is missing, even though the slaves have it.
This patch simply adds the missing TLV_DB_SCALE_MUTE bit for vmaster, as already done in patch_sigmatel.c.
Signed-off-by: Takashi Iwai tiwai@suse.de
sound/pci/hda/patch_conexant.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/sound/pci/hda/patch_conexant.c
b/sound/pci/hda/patch_conexant.c
index 7627a69ca6d7..6f2fa838b635 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -26,6 +26,7 @@ #include <linux/module.h> #include <sound/core.h> #include <sound/jack.h> +#include <sound/tlv.h>
#include "hda_codec.h" #include "hda_local.h" @@ -859,6 +860,11 @@ static int patch_conexant_auto(struct hda_codec
*codec)
if (err < 0) goto error;
if (codec->vendor_id == 0x14f15051) {/* minimum value is actually mute */spec->gen.vmaster_tlv[3] |= TLV_DB_SCALE_MUTE;}codec->patch_ops = cx_auto_patch_ops; /* Some laptops with Conexant chips show stalls in S3 resume,--
Does this mean that when there is no hardware mute switch, the driver create a fake one using mindB of volume as mute ?
The fake mutes are, yes.
But this mean that the volume control and mute are not independent
anymore,
just like those pulseaudio volume controls, volume always change to
zero
after mute and unmute
No, the mute controls are handled individually. And, this commit itself isn't about the fake mute implementations. It just give the hint to TLV.
If the codec support mute in default amp out caps of afg node, should the driver still use min as mute for the virtual master since all slaves have real mute switch
Why the driver add fake mute switch when the hardware real mute switches ?
https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/?id=3868...
https://launchpadlibrarian.net/182545365/AlsaInfo.txt
Codec: IDT 92HD73C1X5
You're looking at a codec that is irrelevant with the patch.
Again, TLV bit just informs that the minimum volume is actually mute for the corresponding volume. This itself has nothing to do with the fake mute. The fake mute is cx5051-specific implementation.
Takashi
participants (2)
-
Raymond Yau -
Takashi Iwai