From: Ville Syrjälä <ville.syrjala@linux.intel.com> Not calling pm_runtime_enable() means that runtime PM can't be enabled at all via sysfs. So we definitely need to call it from somewhere. Calling it from the driver seems like a bad idea because it would have to be paired with a pm_runtime_disable() at driver unload time, otherwise the core gets upset. Also if there's no LPE audio driver loaded then we couldn't runtime suspend i915 either. So it looks like a better plan is to call it from i915 when we register the platform device. That seems to match how pci generally does things. I cargo culted the pm_runtime_forbid() and pm_runtime_set_active() calls from pci as well. The exposed runtime PM API is massive an thorougly misleading, so I don't actually know if this is how you're supposed to use the API or not. But it seems to work. I can now runtime suspend i915 again with or without the LPE audio driver loaded, and reloading the LPE audio driver also seems to work. Note that powertop won't auto-tune runtime PM for platform devices, which is a little annoying. So I'm not sure that leaving runtime PM in "on" mode by default is the best choice here. But I've left it like that for now at least. Also remove the comment about there not being much benefit from LPE audio runtime PM. Not allowing runtime PM blocks i915 runtime PM, which will also block s0ix, and that could have a measurable impact on power consumption. Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Fixes: 0b6b524f3915 ("ALSA: x86: Don't enable runtime PM as default") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> --- drivers/gpu/drm/i915/intel_lpe_audio.c | 5 +++++ sound/x86/intel_hdmi_audio.c | 4 ---- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_lpe_audio.c b/drivers/gpu/drm/i915/intel_lpe_audio.c index 25d8e76489e4..668f00480d97 100644 --- a/drivers/gpu/drm/i915/intel_lpe_audio.c +++ b/drivers/gpu/drm/i915/intel_lpe_audio.c @@ -63,6 +63,7 @@ #include <linux/acpi.h> #include <linux/device.h> #include <linux/pci.h> +#include <linux/pm_runtime.h> #include "i915_drv.h" #include <linux/delay.h> @@ -121,6 +122,10 @@ lpe_audio_platdev_create(struct drm_i915_private *dev_priv) kfree(rsc); + pm_runtime_forbid(&platdev->dev); + pm_runtime_set_active(&platdev->dev); + pm_runtime_enable(&platdev->dev); + return platdev; err: diff --git a/sound/x86/intel_hdmi_audio.c b/sound/x86/intel_hdmi_audio.c index c505b019e09c..bfac6f21ae5e 100644 --- a/sound/x86/intel_hdmi_audio.c +++ b/sound/x86/intel_hdmi_audio.c @@ -1809,10 +1809,6 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev) pdata->notify_pending = false; spin_unlock_irq(&pdata->lpe_audio_slock); - /* runtime PM isn't enabled as default, since it won't save much on - * BYT/CHT devices; user who want the runtime PM should adjust the - * power/ontrol and power/autosuspend_delay_ms sysfs entries instead - */ pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_mark_last_busy(&pdev->dev); pm_runtime_set_active(&pdev->dev); -- 2.10.2

From: Ville Syrjälä <ville.syrjala@linux.intel.com> Clear the notify function pointer in the platform data before we tear down the driver. Otherwise i915 would end up calling a stale function pointer and possibly explode. Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> --- sound/x86/intel_hdmi_audio.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/x86/intel_hdmi_audio.c b/sound/x86/intel_hdmi_audio.c index bfac6f21ae5e..5b89662493c9 100644 --- a/sound/x86/intel_hdmi_audio.c +++ b/sound/x86/intel_hdmi_audio.c @@ -1665,6 +1665,11 @@ static int __maybe_unused hdmi_lpe_audio_resume(struct device *dev) static void hdmi_lpe_audio_free(struct snd_card *card) { struct snd_intelhad *ctx = card->private_data; + struct intel_hdmi_lpe_audio_pdata *pdata = ctx->dev->platform_data; + + spin_lock_irq(&pdata->lpe_audio_slock); + pdata->notify_audio_lpe = NULL; + spin_unlock_irq(&pdata->lpe_audio_slock); cancel_work_sync(&ctx->hdmi_audio_wq); -- 2.10.2

From: Ville Syrjälä <ville.syrjala@linux.intel.com> vlv_display_irq_postinstall() enables the LPE audio interrupts regardless of whether the LPE audio irq chip has masked/unmasked them. Also the irqchip masking/unmasking doesn't consider the state of the display power well or the device, and hence just leads to dmesg spew when it tries to access the hardware while it's powered down. If the current way works, then we don't need to do anything in the mask/unmask hooks. If it doesn't work, well, then we'd need to properly track whether the irqchip has masked/unmasked the interrupts when we enable display interrupts. And the mask/unmask hooks would need to check whether display interrupts are even enabled before frobbing with he registers. So let's just assume the current way works and neuter the mask/unmask hooks. Also clean up vlv_display_irq_postinstall() a bit and stop it from trying to unmask/enable the LPE C interrupt on VLV since it doesn't exist. Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> --- drivers/gpu/drm/i915/i915_irq.c | 15 ++++++-------- drivers/gpu/drm/i915/intel_lpe_audio.c | 36 ---------------------------------- 2 files changed, 6 insertions(+), 45 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index fd97fe00cd0d..190f6aa5d15e 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -2953,7 +2953,6 @@ static void vlv_display_irq_postinstall(struct drm_i915_private *dev_priv) u32 pipestat_mask; u32 enable_mask; enum pipe pipe; - u32 val; pipestat_mask = PLANE_FLIP_DONE_INT_STATUS_VLV | PIPE_CRC_DONE_INTERRUPT_STATUS; @@ -2964,18 +2963,16 @@ static void vlv_display_irq_postinstall(struct drm_i915_private *dev_priv) enable_mask = I915_DISPLAY_PORT_INTERRUPT | I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | - I915_DISPLAY_PIPE_B_EVENT_INTERRUPT; + I915_DISPLAY_PIPE_B_EVENT_INTERRUPT | + I915_LPE_PIPE_A_INTERRUPT | + I915_LPE_PIPE_B_INTERRUPT; + if (IS_CHERRYVIEW(dev_priv)) - enable_mask |= I915_DISPLAY_PIPE_C_EVENT_INTERRUPT; + enable_mask |= I915_DISPLAY_PIPE_C_EVENT_INTERRUPT | + I915_LPE_PIPE_C_INTERRUPT; WARN_ON(dev_priv->irq_mask != ~0); - val = (I915_LPE_PIPE_A_INTERRUPT | - I915_LPE_PIPE_B_INTERRUPT | - I915_LPE_PIPE_C_INTERRUPT); - - enable_mask |= val; - dev_priv->irq_mask = ~enable_mask; GEN5_IRQ_INIT(VLV_, dev_priv->irq_mask, enable_mask); diff --git a/drivers/gpu/drm/i915/intel_lpe_audio.c b/drivers/gpu/drm/i915/intel_lpe_audio.c index 668f00480d97..292fedf30b00 100644 --- a/drivers/gpu/drm/i915/intel_lpe_audio.c +++ b/drivers/gpu/drm/i915/intel_lpe_audio.c @@ -149,44 +149,10 @@ static void lpe_audio_platdev_destroy(struct drm_i915_private *dev_priv) static void lpe_audio_irq_unmask(struct irq_data *d) { - struct drm_i915_private *dev_priv = d->chip_data; - unsigned long irqflags; - u32 val = (I915_LPE_PIPE_A_INTERRUPT | - I915_LPE_PIPE_B_INTERRUPT); - - if (IS_CHERRYVIEW(dev_priv)) - val |= I915_LPE_PIPE_C_INTERRUPT; - - spin_lock_irqsave(&dev_priv->irq_lock, irqflags); - - dev_priv->irq_mask &= ~val; - I915_WRITE(VLV_IIR, val); - I915_WRITE(VLV_IIR, val); - I915_WRITE(VLV_IMR, dev_priv->irq_mask); - POSTING_READ(VLV_IMR); - - spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); } static void lpe_audio_irq_mask(struct irq_data *d) { - struct drm_i915_private *dev_priv = d->chip_data; - unsigned long irqflags; - u32 val = (I915_LPE_PIPE_A_INTERRUPT | - I915_LPE_PIPE_B_INTERRUPT); - - if (IS_CHERRYVIEW(dev_priv)) - val |= I915_LPE_PIPE_C_INTERRUPT; - - spin_lock_irqsave(&dev_priv->irq_lock, irqflags); - - dev_priv->irq_mask |= val; - I915_WRITE(VLV_IMR, dev_priv->irq_mask); - I915_WRITE(VLV_IIR, val); - I915_WRITE(VLV_IIR, val); - POSTING_READ(VLV_IIR); - - spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); } static struct irq_chip lpe_audio_irqchip = { @@ -330,8 +296,6 @@ void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv) desc = irq_to_desc(dev_priv->lpe_audio.irq); - lpe_audio_irq_mask(&desc->irq_data); - lpe_audio_platdev_destroy(dev_priv); irq_free_desc(dev_priv->lpe_audio.irq); -- 2.10.2

From: Ville Syrjälä <ville.syrjala@linux.intel.com> There's no need to distinguish between the DP link rate and HDMI TMDS clock for the purposes of the LPE audio. Both are actually the same thing more or less, which is the link symbol clock. So let's just call the thing ls_clock and simplify the code. Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> --- drivers/gpu/drm/i915/i915_drv.h | 4 ++-- drivers/gpu/drm/i915/intel_audio.c | 19 ++++--------------- drivers/gpu/drm/i915/intel_lpe_audio.c | 14 ++++++-------- include/drm/intel_lpe_audio.h | 3 +-- sound/x86/intel_hdmi_audio.c | 11 ++++++++--- 5 files changed, 21 insertions(+), 30 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index d1f7c48e4ae3..8bf72220ee07 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -3721,8 +3721,8 @@ int intel_lpe_audio_init(struct drm_i915_private *dev_priv); void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv); void intel_lpe_audio_irq_handler(struct drm_i915_private *dev_priv); void intel_lpe_audio_notify(struct drm_i915_private *dev_priv, - void *eld, int port, int pipe, int tmds_clk_speed, - bool dp_output, int link_rate); + void *eld, int port, int pipe, int ls_clock, + bool dp_output); /* intel_i2c.c */ extern int intel_setup_gmbus(struct drm_i915_private *dev_priv); diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c index 52c207e81f41..79eeef25321f 100644 --- a/drivers/gpu/drm/i915/intel_audio.c +++ b/drivers/gpu/drm/i915/intel_audio.c @@ -632,20 +632,9 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder, (int) port, (int) pipe); } - switch (intel_encoder->type) { - case INTEL_OUTPUT_HDMI: - intel_lpe_audio_notify(dev_priv, connector->eld, port, pipe, - crtc_state->port_clock, - false, 0); - break; - case INTEL_OUTPUT_DP: - intel_lpe_audio_notify(dev_priv, connector->eld, port, pipe, - adjusted_mode->crtc_clock, - true, crtc_state->port_clock); - break; - default: - break; - } + intel_lpe_audio_notify(dev_priv, connector->eld, port, pipe, + crtc_state->port_clock, + intel_encoder->type == INTEL_OUTPUT_DP); } /** @@ -680,7 +669,7 @@ void intel_audio_codec_disable(struct intel_encoder *intel_encoder) (int) port, (int) pipe); } - intel_lpe_audio_notify(dev_priv, NULL, port, pipe, 0, false, 0); + intel_lpe_audio_notify(dev_priv, NULL, port, pipe, 0, false); } /** diff --git a/drivers/gpu/drm/i915/intel_lpe_audio.c b/drivers/gpu/drm/i915/intel_lpe_audio.c index 79b9dca985ff..5a1a37e963f1 100644 --- a/drivers/gpu/drm/i915/intel_lpe_audio.c +++ b/drivers/gpu/drm/i915/intel_lpe_audio.c @@ -309,13 +309,14 @@ void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv) * @eld : ELD data * @pipe: pipe id * @port: port id - * @tmds_clk_speed: tmds clock frequency in Hz + * @ls_clock: Link symbol clock in kHz + * @dp_output: Driving a DP output? * * Notify lpe audio driver of eld change. */ void intel_lpe_audio_notify(struct drm_i915_private *dev_priv, - void *eld, int port, int pipe, int tmds_clk_speed, - bool dp_output, int link_rate) + void *eld, int port, int pipe, int ls_clock, + bool dp_output) { unsigned long irq_flags; struct intel_hdmi_lpe_audio_pdata *pdata = NULL; @@ -337,12 +338,8 @@ void intel_lpe_audio_notify(struct drm_i915_private *dev_priv, pdata->eld.port_id = port; pdata->eld.pipe_id = pipe; pdata->hdmi_connected = true; - + pdata->ls_clock = ls_clock; pdata->dp_output = dp_output; - if (tmds_clk_speed) - pdata->tmds_clock_speed = tmds_clk_speed; - if (link_rate) - pdata->link_rate = link_rate; /* Unmute the amp for both DP and HDMI */ I915_WRITE(VLV_AUD_PORT_EN_DBG(port), @@ -352,6 +349,7 @@ void intel_lpe_audio_notify(struct drm_i915_private *dev_priv, memset(pdata->eld.eld_data, 0, HDMI_MAX_ELD_BYTES); pdata->hdmi_connected = false; + pdata->ls_clock = 0; pdata->dp_output = false; /* Mute the amp for both DP and HDMI */ diff --git a/include/drm/intel_lpe_audio.h b/include/drm/intel_lpe_audio.h index c201d39cdfea..8bf804ce8905 100644 --- a/include/drm/intel_lpe_audio.h +++ b/include/drm/intel_lpe_audio.h @@ -38,10 +38,9 @@ struct intel_hdmi_lpe_audio_eld { }; struct intel_hdmi_lpe_audio_pdata { - int tmds_clock_speed; + int ls_clock; bool hdmi_connected; bool dp_output; - int link_rate; struct intel_hdmi_lpe_audio_eld eld; void (*notify_audio_lpe)(struct platform_device *pdev); spinlock_t lpe_audio_slock; diff --git a/sound/x86/intel_hdmi_audio.c b/sound/x86/intel_hdmi_audio.c index cbba4a78afb5..4eaf5de54f61 100644 --- a/sound/x86/intel_hdmi_audio.c +++ b/sound/x86/intel_hdmi_audio.c @@ -1568,7 +1568,7 @@ static void had_audio_wq(struct work_struct *work) struct intel_hdmi_lpe_audio_eld *eld = &pdata->eld; dev_dbg(ctx->dev, "%s: HAD_NOTIFY_ELD : port = %d, tmds = %d\n", - __func__, eld->port_id, pdata->tmds_clock_speed); + __func__, eld->port_id, pdata->ls_clock); switch (eld->pipe_id) { case 0: @@ -1589,8 +1589,13 @@ static void had_audio_wq(struct work_struct *work) memcpy(ctx->eld, eld->eld_data, sizeof(ctx->eld)); ctx->dp_output = pdata->dp_output; - ctx->tmds_clock_speed = pdata->tmds_clock_speed; - ctx->link_rate = pdata->link_rate; + if (ctx->dp_output) { + ctx->tmds_clock_speed = 0; + ctx->link_rate = pdata->ls_clock; + } else { + ctx->tmds_clock_speed = pdata->ls_clock; + ctx->link_rate = 0; + } had_process_hot_plug(ctx); -- 2.10.2

From: Ville Syrjälä <ville.syrjala@linux.intel.com> Shuffle the arguments to intel_lpe_audio_notify() around a bit. Pipe and port being the most important things, so let's put the first, and thre rest can come in as is. Also constify the eld argument. Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> --- drivers/gpu/drm/i915/i915_drv.h | 4 ++-- drivers/gpu/drm/i915/intel_audio.c | 4 ++-- drivers/gpu/drm/i915/intel_lpe_audio.c | 8 ++++---- 3 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 8bf72220ee07..9c528209fba7 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -3721,8 +3721,8 @@ int intel_lpe_audio_init(struct drm_i915_private *dev_priv); void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv); void intel_lpe_audio_irq_handler(struct drm_i915_private *dev_priv); void intel_lpe_audio_notify(struct drm_i915_private *dev_priv, - void *eld, int port, int pipe, int ls_clock, - bool dp_output); + enum pipe pipe, enum port port, + const void *eld, int ls_clock, bool dp_output); /* intel_i2c.c */ extern int intel_setup_gmbus(struct drm_i915_private *dev_priv); diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c index 79eeef25321f..d805b6e6fe71 100644 --- a/drivers/gpu/drm/i915/intel_audio.c +++ b/drivers/gpu/drm/i915/intel_audio.c @@ -632,7 +632,7 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder, (int) port, (int) pipe); } - intel_lpe_audio_notify(dev_priv, connector->eld, port, pipe, + intel_lpe_audio_notify(dev_priv, pipe, port, connector->eld, crtc_state->port_clock, intel_encoder->type == INTEL_OUTPUT_DP); } @@ -669,7 +669,7 @@ void intel_audio_codec_disable(struct intel_encoder *intel_encoder) (int) port, (int) pipe); } - intel_lpe_audio_notify(dev_priv, NULL, port, pipe, 0, false); + intel_lpe_audio_notify(dev_priv, pipe, port, NULL, 0, false); } /** diff --git a/drivers/gpu/drm/i915/intel_lpe_audio.c b/drivers/gpu/drm/i915/intel_lpe_audio.c index 7fd95733eff5..4c770d037f23 100644 --- a/drivers/gpu/drm/i915/intel_lpe_audio.c +++ b/drivers/gpu/drm/i915/intel_lpe_audio.c @@ -307,17 +307,17 @@ void intel_lpe_audio_teardown(struct drm_i915_private *dev_priv) * intel_lpe_audio_notify() - notify lpe audio event * audio driver and i915 * @dev_priv: the i915 drm device private data + * @pipe: pipe + * @port: port * @eld : ELD data - * @pipe: pipe id - * @port: port id * @ls_clock: Link symbol clock in kHz * @dp_output: Driving a DP output? * * Notify lpe audio driver of eld change. */ void intel_lpe_audio_notify(struct drm_i915_private *dev_priv, - void *eld, int port, int pipe, int ls_clock, - bool dp_output) + enum pipe pipe, enum port port, + const void *eld, int ls_clock, bool dp_output) { unsigned long irq_flags; struct intel_hdmi_lpe_audio_pdata *pdata = NULL; -- 2.10.2

From: Ville Syrjälä <ville.syrjala@linux.intel.com> In preparation for register a PCM device for each pipe adjust link up the ctl elements with the corresponding PCM device. Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> --- sound/x86/intel_hdmi_audio.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) diff --git a/sound/x86/intel_hdmi_audio.c b/sound/x86/intel_hdmi_audio.c index c2b78621852e..69e10845633a 100644 --- a/sound/x86/intel_hdmi_audio.c +++ b/sound/x86/intel_hdmi_audio.c @@ -1609,11 +1609,16 @@ static void had_audio_wq(struct work_struct *work) /* * Jack interface */ -static int had_create_jack(struct snd_intelhad *ctx) +static int had_create_jack(struct snd_intelhad *ctx, + struct snd_pcm *pcm) { + char hdmi_str[32]; int err; - err = snd_jack_new(ctx->card, "HDMI/DP", SND_JACK_AVOUT, &ctx->jack, + snprintf(hdmi_str, sizeof(hdmi_str), + "HDMI/DP,pcm=%d", pcm->device); + + err = snd_jack_new(ctx->card, hdmi_str, SND_JACK_AVOUT, &ctx->jack, true, false); if (err < 0) return err; @@ -1793,7 +1798,17 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev) /* create controls */ for (i = 0; i < ARRAY_SIZE(had_controls); i++) { - ret = snd_ctl_add(card, snd_ctl_new1(&had_controls[i], ctx)); + struct snd_kcontrol *kctl; + + kctl = snd_ctl_new1(&had_controls[i], ctx); + if (!kctl) { + ret = -ENOMEM; + goto err; + } + + kctl->id.device = pcm->device; + + ret = snd_ctl_add(card, kctl); if (ret < 0) goto err; } @@ -1805,7 +1820,7 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev) if (ret < 0) goto err; - ret = had_create_jack(ctx); + ret = had_create_jack(ctx, pcm); if (ret < 0) goto err; -- 2.10.2

From: Ville Syrjälä <ville.syrjala@linux.intel.com> Now that everything is in place let's register a PCM device for each port of the display engine. This will make it possible to actually output audio to multiple displays at the same time. And it avoids modesets on unrelated displays from clobbering up the ELD and whatnot for the display currently doing the playback. v2: Add a PCM per port instead of per pipe Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> --- drivers/gpu/drm/i915/intel_lpe_audio.c | 19 ++--- include/drm/intel_lpe_audio.h | 6 +- sound/x86/intel_hdmi_audio.c | 126 +++++++++++++++++++-------------- sound/x86/intel_hdmi_audio.h | 7 +- 4 files changed, 92 insertions(+), 66 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_lpe_audio.c b/drivers/gpu/drm/i915/intel_lpe_audio.c index bdbc235141b5..fa728ed21d1f 100644 --- a/drivers/gpu/drm/i915/intel_lpe_audio.c +++ b/drivers/gpu/drm/i915/intel_lpe_audio.c @@ -111,7 +111,11 @@ lpe_audio_platdev_create(struct drm_i915_private *dev_priv) pinfo.size_data = sizeof(*pdata); pinfo.dma_mask = DMA_BIT_MASK(32); - pdata->port.pipe = -1; + pdata->num_pipes = INTEL_INFO(dev_priv)->num_pipes; + pdata->num_ports = IS_CHERRYVIEW(dev_priv) ? 3 : 2; /* B,C,D or B,C */ + pdata->port[0].pipe = -1; + pdata->port[1].pipe = -1; + pdata->port[2].pipe = -1; spin_lock_init(&pdata->lpe_audio_slock); platdev = platform_device_register_full(&pinfo); @@ -319,7 +323,7 @@ void intel_lpe_audio_notify(struct drm_i915_private *dev_priv, enum pipe pipe, enum port port, const void *eld, int ls_clock, bool dp_output) { - unsigned long irq_flags; + unsigned long irqflags; struct intel_hdmi_lpe_audio_pdata *pdata; struct intel_hdmi_lpe_audio_port_pdata *ppdata; u32 audio_enable; @@ -328,14 +332,12 @@ void intel_lpe_audio_notify(struct drm_i915_private *dev_priv, return; pdata = dev_get_platdata(&dev_priv->lpe_audio.platdev->dev); - ppdata = &pdata->port; + ppdata = &pdata->port[port]; - spin_lock_irqsave(&pdata->lpe_audio_slock, irq_flags); + spin_lock_irqsave(&pdata->lpe_audio_slock, irqflags); audio_enable = I915_READ(VLV_AUD_PORT_EN_DBG(port)); - ppdata->port = port; - if (eld != NULL) { memcpy(ppdata->eld, eld, HDMI_MAX_ELD_BYTES); ppdata->pipe = pipe; @@ -357,8 +359,7 @@ void intel_lpe_audio_notify(struct drm_i915_private *dev_priv, } if (pdata->notify_audio_lpe) - pdata->notify_audio_lpe(dev_priv->lpe_audio.platdev); + pdata->notify_audio_lpe(dev_priv->lpe_audio.platdev, port); - spin_unlock_irqrestore(&pdata->lpe_audio_slock, - irq_flags); + spin_unlock_irqrestore(&pdata->lpe_audio_slock, irqflags); } diff --git a/include/drm/intel_lpe_audio.h b/include/drm/intel_lpe_audio.h index 211f1cd61153..a911530c012e 100644 --- a/include/drm/intel_lpe_audio.h +++ b/include/drm/intel_lpe_audio.h @@ -40,9 +40,11 @@ struct intel_hdmi_lpe_audio_port_pdata { }; struct intel_hdmi_lpe_audio_pdata { - struct intel_hdmi_lpe_audio_port_pdata port; + struct intel_hdmi_lpe_audio_port_pdata port[3]; /* ports B,C,D */ + int num_ports; + int num_pipes; - void (*notify_audio_lpe)(struct platform_device *pdev); + void (*notify_audio_lpe)(struct platform_device *pdev, int pipe); spinlock_t lpe_audio_slock; }; diff --git a/sound/x86/intel_hdmi_audio.c b/sound/x86/intel_hdmi_audio.c index 12fae26e70bb..909391d5270c 100644 --- a/sound/x86/intel_hdmi_audio.c +++ b/sound/x86/intel_hdmi_audio.c @@ -42,6 +42,8 @@ #include <drm/intel_lpe_audio.h> #include "intel_hdmi_audio.h" +#define for_each_pipe(card_ctx, pipe) \ + for ((pipe) = 0; (pipe) < (card_ctx)->num_pipes; (pipe)++) #define for_each_port(card_ctx, port) \ for ((port) = 0; (port) < (card_ctx)->num_ports; (port)++) @@ -192,15 +194,30 @@ static void had_substream_put(struct snd_intelhad *intelhaddata) spin_unlock_irqrestore(&intelhaddata->had_spinlock, flags); } +static u32 had_config_offset(int pipe) +{ + switch (pipe) { + default: + case 0: + return AUDIO_HDMI_CONFIG_A; + case 1: + return AUDIO_HDMI_CONFIG_B; + case 2: + return AUDIO_HDMI_CONFIG_C; + } +} + /* Register access functions */ -static u32 had_read_register_raw(struct snd_intelhad *ctx, u32 reg) +static u32 had_read_register_raw(struct snd_intelhad_card *card_ctx, + int pipe, u32 reg) { - return ioread32(ctx->card_ctx->mmio_start + ctx->had_config_offset + reg); + return ioread32(card_ctx->mmio_start + had_config_offset(pipe) + reg); } -static void had_write_register_raw(struct snd_intelhad *ctx, u32 reg, u32 val) +static void had_write_register_raw(struct snd_intelhad_card *card_ctx, + int pipe, u32 reg, u32 val) { - iowrite32(val, ctx->card_ctx->mmio_start + ctx->had_config_offset + reg); + iowrite32(val, card_ctx->mmio_start + had_config_offset(pipe) + reg); } static void had_read_register(struct snd_intelhad *ctx, u32 reg, u32 *val) @@ -208,13 +225,13 @@ static void had_read_register(struct snd_intelhad *ctx, u32 reg, u32 *val) if (!ctx->connected) *val = 0; else - *val = had_read_register_raw(ctx, reg); + *val = had_read_register_raw(ctx->card_ctx, ctx->pipe, reg); } static void had_write_register(struct snd_intelhad *ctx, u32 reg, u32 val) { if (ctx->connected) - had_write_register_raw(ctx, reg, val); + had_write_register_raw(ctx->card_ctx, ctx->pipe, reg, val); } /* @@ -1361,6 +1378,9 @@ static void had_process_hot_plug(struct snd_intelhad *intelhaddata) return; } + /* Disable Audio */ + had_enable_audio(intelhaddata, false); + intelhaddata->connected = true; dev_dbg(intelhaddata->dev, "%s @ %d:DEBUG PLUG/UNPLUG : HAD_DRV_CONNECTED\n", @@ -1523,26 +1543,31 @@ static const struct snd_kcontrol_new had_controls[] = { static irqreturn_t display_pipe_interrupt_handler(int irq, void *dev_id) { struct snd_intelhad_card *card_ctx = dev_id; - int port; + u32 audio_stat[3] = {}; + int pipe, port; + + for_each_pipe(card_ctx, pipe) { + /* use raw register access to ack IRQs even while disconnected */ + audio_stat[pipe] = had_read_register_raw(card_ctx, pipe, + AUD_HDMI_STATUS) & + (HDMI_AUDIO_UNDERRUN | HDMI_AUDIO_BUFFER_DONE); + + if (audio_stat[pipe]) + had_write_register_raw(card_ctx, pipe, + AUD_HDMI_STATUS, audio_stat[pipe]); + } for_each_port(card_ctx, port) { struct snd_intelhad *ctx = &card_ctx->pcm_ctx[port]; - u32 audio_stat; + int pipe = ctx->pipe; - /* use raw register access to ack IRQs even while disconnected */ - audio_stat = had_read_register_raw(ctx, AUD_HDMI_STATUS); - - if (audio_stat & HDMI_AUDIO_UNDERRUN) { - had_write_register_raw(ctx, AUD_HDMI_STATUS, - HDMI_AUDIO_UNDERRUN); - had_process_buffer_underrun(ctx); - } + if (pipe < 0) + continue; - if (audio_stat & HDMI_AUDIO_BUFFER_DONE) { - had_write_register_raw(ctx, AUD_HDMI_STATUS, - HDMI_AUDIO_BUFFER_DONE); + if (audio_stat[pipe] & HDMI_AUDIO_BUFFER_DONE) had_process_buffer_done(ctx); - } + if (audio_stat[pipe] & HDMI_AUDIO_UNDERRUN) + had_process_buffer_underrun(ctx); } return IRQ_HANDLED; @@ -1551,16 +1576,12 @@ static irqreturn_t display_pipe_interrupt_handler(int irq, void *dev_id) /* * monitor plug/unplug notification from i915; just kick off the work */ -static void notify_audio_lpe(struct platform_device *pdev) +static void notify_audio_lpe(struct platform_device *pdev, int port) { struct snd_intelhad_card *card_ctx = platform_get_drvdata(pdev); - int port; + struct snd_intelhad *ctx = &card_ctx->pcm_ctx[port]; - for_each_port(card_ctx, port) { - struct snd_intelhad *ctx = &card_ctx->pcm_ctx[port]; - - schedule_work(&ctx->hdmi_audio_wq); - } + schedule_work(&ctx->hdmi_audio_wq); } /* the work to handle monitor hot plug/unplug */ @@ -1569,34 +1590,27 @@ static void had_audio_wq(struct work_struct *work) struct snd_intelhad *ctx = container_of(work, struct snd_intelhad, hdmi_audio_wq); struct intel_hdmi_lpe_audio_pdata *pdata = ctx->dev->platform_data; - struct intel_hdmi_lpe_audio_port_pdata *ppdata = &pdata->port; + struct intel_hdmi_lpe_audio_port_pdata *ppdata = &pdata->port[ctx->port]; pm_runtime_get_sync(ctx->dev); mutex_lock(&ctx->mutex); if (ppdata->pipe < 0) { - dev_dbg(ctx->dev, "%s: Event: HAD_NOTIFY_HOT_UNPLUG\n", - __func__); + dev_dbg(ctx->dev, "%s: Event: HAD_NOTIFY_HOT_UNPLUG : port = %d\n", + __func__, ctx->port); + memset(ctx->eld, 0, sizeof(ctx->eld)); /* clear the old ELD */ + + ctx->dp_output = false; + ctx->tmds_clock_speed = 0; + ctx->link_rate = 0; + + /* Shut down the stream */ had_process_hot_unplug(ctx); + + ctx->pipe = -1; } else { dev_dbg(ctx->dev, "%s: HAD_NOTIFY_ELD : port = %d, tmds = %d\n", - __func__, ppdata->port, ppdata->ls_clock); - - switch (ppdata->pipe) { - case 0: - ctx->had_config_offset = AUDIO_HDMI_CONFIG_A; - break; - case 1: - ctx->had_config_offset = AUDIO_HDMI_CONFIG_B; - break; - case 2: - ctx->had_config_offset = AUDIO_HDMI_CONFIG_C; - break; - default: - dev_dbg(ctx->dev, "Invalid pipe %d\n", - ppdata->pipe); - break; - } + __func__, ctx->port, ppdata->ls_clock); memcpy(ctx->eld, ppdata->eld, sizeof(ctx->eld)); @@ -1609,11 +1623,18 @@ static void had_audio_wq(struct work_struct *work) ctx->link_rate = 0; } + /* + * Shut down the stream before we change + * the pipe assignment for this pcm device + */ had_process_hot_plug(ctx); - /* Process mode change if stream is active */ + ctx->pipe = ppdata->pipe; + + /* Restart the stream if necessary */ had_process_mode_change(ctx); } + mutex_unlock(&ctx->mutex); pm_runtime_mark_last_busy(ctx->dev); pm_runtime_put_autosuspend(ctx->dev); @@ -1794,7 +1815,8 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev) init_channel_allocations(); - card_ctx->num_ports = 1; + card_ctx->num_pipes = pdata->num_pipes; + card_ctx->num_ports = pdata->num_ports; for_each_port(card_ctx, port) { struct snd_intelhad *ctx = &card_ctx->pcm_ctx[port]; @@ -1802,12 +1824,12 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev) ctx->card_ctx = card_ctx; ctx->dev = card_ctx->dev; + ctx->port = port; + ctx->pipe = -1; INIT_WORK(&ctx->hdmi_audio_wq, had_audio_wq); - ctx->had_config_offset = AUDIO_HDMI_CONFIG_A; - - ret = snd_pcm_new(card, INTEL_HAD, PCM_INDEX, MAX_PB_STREAMS, + ret = snd_pcm_new(card, INTEL_HAD, port, MAX_PB_STREAMS, MAX_CAP_STREAMS, &pcm); if (ret) goto err; diff --git a/sound/x86/intel_hdmi_audio.h b/sound/x86/intel_hdmi_audio.h index 2725964ebc46..0d91bb5dbab7 100644 --- a/sound/x86/intel_hdmi_audio.h +++ b/sound/x86/intel_hdmi_audio.h @@ -32,7 +32,6 @@ #include "intel_hdmi_lpe_audio.h" -#define PCM_INDEX 0 #define MAX_PB_STREAMS 1 #define MAX_CAP_STREAMS 0 #define BYTES_PER_WORD 0x4 @@ -112,6 +111,8 @@ struct snd_intelhad { struct snd_pcm_chmap *chmap; int tmds_clock_speed; int link_rate; + int port; /* fixed */ + int pipe; /* can change dynamically */ /* ring buffer (BD) position index */ unsigned int bd_head; @@ -123,7 +124,6 @@ struct snd_intelhad { unsigned int period_bytes; /* PCM period size in bytes */ /* internal stuff */ - unsigned int had_config_offset; union aud_cfg aud_config; /* AUD_CONFIG reg value cache */ struct work_struct hdmi_audio_wq; struct mutex mutex; /* for protecting chmap and eld */ @@ -138,8 +138,9 @@ struct snd_intelhad_card { /* internal stuff */ int irq; void __iomem *mmio_start; + int num_pipes; int num_ports; - struct snd_intelhad pcm_ctx[3]; + struct snd_intelhad pcm_ctx[3]; /* one for each port */ }; #endif /* _INTEL_HDMI_AUDIO_ */ -- 2.10.2

From: Ville Syrjälä <ville.syrjala@linux.intel.com> Now that the kernel driver exposes several pcm devices, update the hdmi pcm definitions to match. Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> --- src/conf/cards/HdmiLpeAudio.conf | 74 ++++++++++++++++++++++++++++++++++++++-- 1 file changed, 72 insertions(+), 2 deletions(-) diff --git a/src/conf/cards/HdmiLpeAudio.conf b/src/conf/cards/HdmiLpeAudio.conf index 61bdfeae2917..ad174b8ac450 100644 --- a/src/conf/cards/HdmiLpeAudio.conf +++ b/src/conf/cards/HdmiLpeAudio.conf @@ -51,11 +51,14 @@ HdmiLpeAudio.pcm.default { <confdir:pcm/hdmi.conf> -HdmiLpeAudio.pcm.hdmi.0 { - @args [ CARD AES0 AES1 AES2 AES3 ] +HdmiLpeAudio.pcm.hdmi.common { + @args [ CARD DEVICE AES0 AES1 AES2 AES3 ] @args.CARD { type string } + @args.DEVICE { + type integer + } @args.AES0 { type integer } @@ -72,6 +75,7 @@ HdmiLpeAudio.pcm.hdmi.0 { slave.pcm { type hw card $CARD + device $DEVICE } hooks.0 { type ctl_elems @@ -86,3 +90,69 @@ HdmiLpeAudio.pcm.hdmi.0 { ] } } + +HdmiLpeAudio.pcm.hdmi.0 { + @args [ CARD AES0 AES1 AES2 AES3 ] + @args.CARD { type string } + @args.AES0 { type integer } + @args.AES1 { type integer } + @args.AES2 { type integer } + @args.AES3 { type integer } + @func refer + name { + @func concat + strings [ + "cards.HdmiLpeAudio.pcm.hdmi.common:" + "CARD=" $CARD "," + "DEVICE=0," + "AES0=" $AES0 "," + "AES1=" $AES1 "," + "AES2=" $AES2 "," + "AES3=" $AES3 + ] + } +} + +HdmiLpeAudio.pcm.hdmi.1 { + @args [ CARD AES0 AES1 AES2 AES3 ] + @args.CARD { type string } + @args.AES0 { type integer } + @args.AES1 { type integer } + @args.AES2 { type integer } + @args.AES3 { type integer } + @func refer + name { + @func concat + strings [ + "cards.HdmiLpeAudio.pcm.hdmi.common:" + "CARD=" $CARD "," + "DEVICE=1," + "AES0=" $AES0 "," + "AES1=" $AES1 "," + "AES2=" $AES2 "," + "AES3=" $AES3 + ] + } +} + +HdmiLpeAudio.pcm.hdmi.2 { + @args [ CARD AES0 AES1 AES2 AES3 ] + @args.CARD { type string } + @args.AES0 { type integer } + @args.AES1 { type integer } + @args.AES2 { type integer } + @args.AES3 { type integer } + @func refer + name { + @func concat + strings [ + "cards.HdmiLpeAudio.pcm.hdmi.common:" + "CARD=" $CARD "," + "DEVICE=2," + "AES0=" $AES0 "," + "AES1=" $AES1 "," + "AES2=" $AES2 "," + "AES3=" $AES3 + ] + } +} -- 2.10.2