Hi, all.

Here is content of LIRC config file lircd.conf with IR-codes for X-Fi Surround 5.1 USB remote control.

All buttons (include volume knob) works fine with Alsa driver 1.0.24 and LIRC 0.9.0.

Wiki-page (http://alsa.opensrc.org/Usb-audio#Creative_USB_X-Fi_Surround_5.1) for this card presents information about button codes only for volume knob on this card. Because of this information may be useful, I think.

Thanks, guys, for your work.

Roman.

----------------------------------------------- ----------------------------------------------- begin remote

name X-F.Surround-5.1.Remote.Control bits 8 gap 300000

begin codes knob-mute 0x0d knob-vol- 0x0f knob-vol+ 0x10 power 0x29 mute 0x2a vol+ 0x2b vol- 0x2c menu-back 0x2d display 0x2e play-pause 0x2f ok 0x30 up 0x31 down 0x32 prev 0x33 next 0x34 cmss3d-on 0x37 cmss3d-off 0x38 cryst-on 0x39 cryst-off 0x3a shuffle 0x3b repeat 0x3c end codes

end remote ----------------------------------------------- -----------------------------------------------