[alsa-devel] [PATCH] ASoC: rl6231: fix range of DMIC clock
The maximum DMIC clock rate is 3.072 MHz for most DMIC. And it will get better performance in higher clock rate. If we set maximum to 3 MHz in driver, we will get a clock rate which is not even close to 3 MHz. For example, if DMIC clock source is 24.576 MHz, the DMIC clock will be about 1.5 MHz in current code. But it will be 3.072 MHz with this patch.
Signed-off-by: John Lin john.lin@realtek.com --- sound/soc/codecs/rl6231.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/rl6231.c b/sound/soc/codecs/rl6231.c index 18b4292..1dc68ab 100644 --- a/sound/soc/codecs/rl6231.c +++ b/sound/soc/codecs/rl6231.c @@ -82,8 +82,8 @@ int rl6231_calc_dmic_clk(int rate) for (i = 0; i < ARRAY_SIZE(div); i++) { if ((div[i] % 3) == 0) continue; - /* find divider that gives DMIC frequency below 3MHz */ - if (3000000 * div[i] >= rate) + /* find divider that gives DMIC frequency below 3.072MHz */ + if (3072000 * div[i] >= rate) return i; }
The patch
ASoC: rl6231: fix range of DMIC clock
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 7336dcefac4d8f94fa205a668138a6462841acc4 Mon Sep 17 00:00:00 2001
From: John Lin john.lin@realtek.com Date: Mon, 16 Nov 2015 14:41:07 +0800 Subject: [PATCH] ASoC: rl6231: fix range of DMIC clock
The maximum DMIC clock rate is 3.072 MHz for most DMIC. And it will get better performance in higher clock rate. If we set maximum to 3 MHz in driver, we will get a clock rate which is not even close to 3 MHz. For example, if DMIC clock source is 24.576 MHz, the DMIC clock will be about 1.5 MHz in current code. But it will be 3.072 MHz with this patch.
Signed-off-by: John Lin john.lin@realtek.com Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/codecs/rl6231.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/rl6231.c b/sound/soc/codecs/rl6231.c index 18b42925314e..1dc68ab08a17 100644 --- a/sound/soc/codecs/rl6231.c +++ b/sound/soc/codecs/rl6231.c @@ -82,8 +82,8 @@ int rl6231_calc_dmic_clk(int rate) for (i = 0; i < ARRAY_SIZE(div); i++) { if ((div[i] % 3) == 0) continue; - /* find divider that gives DMIC frequency below 3MHz */ - if (3000000 * div[i] >= rate) + /* find divider that gives DMIC frequency below 3.072MHz */ + if (3072000 * div[i] >= rate) return i; }
participants (2)
-
John Lin -
Mark Brown