[RFC PATCH] Soundwire: Initialize multi_link with fwnode props
According to the TODO, In sw_bus_master_add, bus->multi_link is to be populated with properties from FW node props. Make this happen by creating a new fwnode_handle flag FWNODE_FLAG_MULTI_LINKED and use the flag to store the multi_link value from intel_link_startup. Use this flag to initialize bus->multi_link.
Signed-off-by: Khalid Masum khalid.masum.92@gmail.com --- I do not think adding a new flag for fwnode_handle is a good idea. So, what would be the best way to initialize bus->multilink with fwnode props?
-- Khalid Masum
drivers/soundwire/bus.c | 4 ++-- drivers/soundwire/intel.c | 1 + include/linux/fwnode.h | 1 + 3 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index a2bfb0434a67..80df1672c60b 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -74,9 +74,9 @@ int sdw_bus_master_add(struct sdw_bus *bus, struct device *parent,
/* * Initialize multi_link flag - * TODO: populate this flag by reading property from FW node */ - bus->multi_link = false; + bus->multi_link = (fwnode->flags & FWNODE_FLAG_MULTI_LINKED) + == FWNODE_FLAG_MULTI_LINKED; if (bus->ops->read_prop) { ret = bus->ops->read_prop(bus); if (ret < 0) { diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c index 505c5ef061e3..034d1c523ddf 100644 --- a/drivers/soundwire/intel.c +++ b/drivers/soundwire/intel.c @@ -1347,6 +1347,7 @@ int intel_link_startup(struct auxiliary_device *auxdev) */ bus->multi_link = true; bus->hw_sync_min_links = 1; + dev->fwnode->flags |= FWNODE_FLAG_MULTI_LINKED; }
/* Initialize shim, controller */ diff --git a/include/linux/fwnode.h b/include/linux/fwnode.h index 9a81c4410b9f..446a52744953 100644 --- a/include/linux/fwnode.h +++ b/include/linux/fwnode.h @@ -32,6 +32,7 @@ struct device; #define FWNODE_FLAG_NOT_DEVICE BIT(1) #define FWNODE_FLAG_INITIALIZED BIT(2) #define FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD BIT(3) +#define FWNODE_FLAG_MULTI_LINKED BIT(4)
struct fwnode_handle { struct fwnode_handle *secondary;
On Sun, Aug 14, 2022 at 02:04:15PM +0600, Khalid Masum wrote:
According to the TODO, In sw_bus_master_add, bus->multi_link is to be populated with properties from FW node props. Make this happen by creating a new fwnode_handle flag FWNODE_FLAG_MULTI_LINKED and use the flag to store the multi_link value from intel_link_startup. Use this flag to initialize bus->multi_link.
Signed-off-by: Khalid Masum khalid.masum.92@gmail.com
I do not think adding a new flag for fwnode_handle is a good idea. So, what would be the best way to initialize bus->multilink with fwnode props?
-- Khalid Masum
drivers/soundwire/bus.c | 4 ++-- drivers/soundwire/intel.c | 1 + include/linux/fwnode.h | 1 + 3 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index a2bfb0434a67..80df1672c60b 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -74,9 +74,9 @@ int sdw_bus_master_add(struct sdw_bus *bus, struct device *parent,
/* * Initialize multi_link flag
* TODO: populate this flag by reading property from FW node- bus->multi_link = false;
- bus->multi_link = (fwnode->flags & FWNODE_FLAG_MULTI_LINKED)
== FWNODE_FLAG_MULTI_LINKED;diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c index 505c5ef061e3..034d1c523ddf 100644 --- a/drivers/soundwire/intel.c +++ b/drivers/soundwire/intel.c @@ -1347,6 +1347,7 @@ int intel_link_startup(struct auxiliary_device *auxdev) */ bus->multi_link = true; bus->hw_sync_min_links = 1;
dev->fwnode->flags |= FWNODE_FLAG_MULTI_LINKED;}
/* Initialize shim, controller */
diff --git a/include/linux/fwnode.h b/include/linux/fwnode.h index 9a81c4410b9f..446a52744953 100644 --- a/include/linux/fwnode.h +++ b/include/linux/fwnode.h @@ -32,6 +32,7 @@ struct device; #define FWNODE_FLAG_NOT_DEVICE BIT(1) #define FWNODE_FLAG_INITIALIZED BIT(2) #define FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD BIT(3) +#define FWNODE_FLAG_MULTI_LINKED BIT(4)
What does this commit actually change?
Did you test this on real hardware?
thanks,
greg k-h
On 8/14/22 15:45, Greg KH wrote:
On Sun, Aug 14, 2022 at 02:04:15PM +0600, Khalid Masum wrote:
According to the TODO, In sw_bus_master_add, bus->multi_link is to be populated with properties from FW node props. Make this happen by creating a new fwnode_handle flag FWNODE_FLAG_MULTI_LINKED and use the flag to store the multi_link value from intel_link_startup. Use this flag to initialize bus->multi_link.
Signed-off-by: Khalid Masum khalid.masum.92@gmail.com
I do not think adding a new flag for fwnode_handle is a good idea. So, what would be the best way to initialize bus->multilink with fwnode props?
-- Khalid Masum
drivers/soundwire/bus.c | 4 ++-- drivers/soundwire/intel.c | 1 + include/linux/fwnode.h | 1 + 3 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index a2bfb0434a67..80df1672c60b 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -74,9 +74,9 @@ int sdw_bus_master_add(struct sdw_bus *bus, struct device *parent,
/* * Initialize multi_link flag
* TODO: populate this flag by reading property from FW node- bus->multi_link = false;
- bus->multi_link = (fwnode->flags & FWNODE_FLAG_MULTI_LINKED)
== FWNODE_FLAG_MULTI_LINKED;diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c index 505c5ef061e3..034d1c523ddf 100644 --- a/drivers/soundwire/intel.c +++ b/drivers/soundwire/intel.c @@ -1347,6 +1347,7 @@ int intel_link_startup(struct auxiliary_device *auxdev) */ bus->multi_link = true; bus->hw_sync_min_links = 1;
dev->fwnode->flags |= FWNODE_FLAG_MULTI_LINKED;}
/* Initialize shim, controller */
diff --git a/include/linux/fwnode.h b/include/linux/fwnode.h index 9a81c4410b9f..446a52744953 100644 --- a/include/linux/fwnode.h +++ b/include/linux/fwnode.h @@ -32,6 +32,7 @@ struct device; #define FWNODE_FLAG_NOT_DEVICE BIT(1) #define FWNODE_FLAG_INITIALIZED BIT(2) #define FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD BIT(3) +#define FWNODE_FLAG_MULTI_LINKED BIT(4)
What does this commit actually change?
The new flag will lets us save if the device has multilink in fwnode_handle whenever needed. Then for soundwire/intel, save the multi_link flag into fwnode during startup. Later at master_add, as written in todo, initialize the multilink flag with fwnode's flag property.
Did you test this on real hardware?
I did not test this on real hardware.
thanks,
greg k-h
thanks, -- Khalid Masum
On Mon, Aug 15, 2022 at 10:08:07AM +0600, Khalid Masum wrote:
On 8/14/22 15:45, Greg KH wrote:
On Sun, Aug 14, 2022 at 02:04:15PM +0600, Khalid Masum wrote:
According to the TODO, In sw_bus_master_add, bus->multi_link is to be populated with properties from FW node props. Make this happen by creating a new fwnode_handle flag FWNODE_FLAG_MULTI_LINKED and use the flag to store the multi_link value from intel_link_startup. Use this flag to initialize bus->multi_link.
Signed-off-by: Khalid Masum khalid.masum.92@gmail.com
I do not think adding a new flag for fwnode_handle is a good idea. So, what would be the best way to initialize bus->multilink with fwnode props?
-- Khalid Masum
drivers/soundwire/bus.c | 4 ++-- drivers/soundwire/intel.c | 1 + include/linux/fwnode.h | 1 + 3 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index a2bfb0434a67..80df1672c60b 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -74,9 +74,9 @@ int sdw_bus_master_add(struct sdw_bus *bus, struct device *parent, /* * Initialize multi_link flag
* TODO: populate this flag by reading property from FW node- bus->multi_link = false;
- bus->multi_link = (fwnode->flags & FWNODE_FLAG_MULTI_LINKED)
== FWNODE_FLAG_MULTI_LINKED;
I missed that this was an if statement here, please write this to be more obvious and readable.
if (bus->ops->read_prop) { ret = bus->ops->read_prop(bus); if (ret < 0) { diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c index 505c5ef061e3..034d1c523ddf 100644 --- a/drivers/soundwire/intel.c +++ b/drivers/soundwire/intel.c @@ -1347,6 +1347,7 @@ int intel_link_startup(struct auxiliary_device *auxdev) */ bus->multi_link = true; bus->hw_sync_min_links = 1;
dev->fwnode->flags |= FWNODE_FLAG_MULTI_LINKED;diff --git a/include/linux/fwnode.h b/include/linux/fwnode.h index 9a81c4410b9f..446a52744953 100644 --- a/include/linux/fwnode.h +++ b/include/linux/fwnode.h @@ -32,6 +32,7 @@ struct device; #define FWNODE_FLAG_NOT_DEVICE BIT(1) #define FWNODE_FLAG_INITIALIZED BIT(2) #define FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD BIT(3) +#define FWNODE_FLAG_MULTI_LINKED BIT(4)
What does this commit actually change?
The new flag will lets us save if the device has multilink in fwnode_handle whenever needed. Then for soundwire/intel, save the multi_link flag into fwnode during startup. Later at master_add, as written in todo, initialize the multilink flag with fwnode's flag property.
And what does that allow to happen? What changes with all of this?
thanks,
greg k-h
On 8/15/22 12:37, Greg KH wrote:
On Mon, Aug 15, 2022 at 10:08:07AM +0600, Khalid Masum wrote:
On 8/14/22 15:45, Greg KH wrote:
On Sun, Aug 14, 2022 at 02:04:15PM +0600, Khalid Masum wrote:
According to the TODO, In sw_bus_master_add, bus->multi_link is to be populated with properties from FW node props. Make this happen by creating a new fwnode_handle flag FWNODE_FLAG_MULTI_LINKED and use the flag to store the multi_link value from intel_link_startup. Use this flag to initialize bus->multi_link.
Signed-off-by: Khalid Masum khalid.masum.92@gmail.com
I do not think adding a new flag for fwnode_handle is a good idea. So, what would be the best way to initialize bus->multilink with fwnode props?
-- Khalid Masumdrivers/soundwire/bus.c | 4 ++-- drivers/soundwire/intel.c | 1 + include/linux/fwnode.h | 1 + 3 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index a2bfb0434a67..80df1672c60b 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -74,9 +74,9 @@ int sdw_bus_master_add(struct sdw_bus *bus, struct device *parent, /* * Initialize multi_link flag
* TODO: populate this flag by reading property from FW node- bus->multi_link = false;
- bus->multi_link = (fwnode->flags & FWNODE_FLAG_MULTI_LINKED)
== FWNODE_FLAG_MULTI_LINKED;I missed that this was an if statement here, please write this to be more obvious and readable.
if (bus->ops->read_prop) { ret = bus->ops->read_prop(bus); if (ret < 0) {diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c index 505c5ef061e3..034d1c523ddf 100644 --- a/drivers/soundwire/intel.c +++ b/drivers/soundwire/intel.c @@ -1347,6 +1347,7 @@ int intel_link_startup(struct auxiliary_device *auxdev) */ bus->multi_link = true; bus->hw_sync_min_links = 1;
dev->fwnode->flags |= FWNODE_FLAG_MULTI_LINKED;diff --git a/include/linux/fwnode.h b/include/linux/fwnode.h index 9a81c4410b9f..446a52744953 100644 --- a/include/linux/fwnode.h +++ b/include/linux/fwnode.h @@ -32,6 +32,7 @@ struct device; #define FWNODE_FLAG_NOT_DEVICE BIT(1) #define FWNODE_FLAG_INITIALIZED BIT(2) #define FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD BIT(3) +#define FWNODE_FLAG_MULTI_LINKED BIT(4)
What does this commit actually change?
The new flag will lets us save if the device has multilink in fwnode_handle whenever needed. Then for soundwire/intel, save the multi_link flag into fwnode during startup. Later at master_add, as written in todo, initialize the multilink flag with fwnode's flag property.
And what does that allow to happen? What changes with all of this?
As suggested by Pierre-Louis Bossart these changes are not necessary and the TODO is to be removed. Earlier my intention was to create a new flag that lets us know whether multi_link is to be read from sdw_bus_master_add just as instructed in TODO.
I shall send another patch, that removes the TODO, as suggested by Pierre-Louis Bossart.
thanks,
greg k-h
thanks, -- Khalid Masum
On Sun, Aug 14, 2022 at 11:31 AM Khalid Masum khalid.masum.92@gmail.com wrote:
According to the TODO, In sw_bus_master_add, bus->multi_link is to be populated with properties from FW node props. Make this happen by creating a new fwnode_handle flag FWNODE_FLAG_MULTI_LINKED and use the flag to store the multi_link value from intel_link_startup. Use this flag to initialize bus->multi_link.
...
/* * Initialize multi_link flag
* TODO: populate this flag by reading property from FW node */bus->multi_link = false;
bus->multi_link = (fwnode->flags & FWNODE_FLAG_MULTI_LINKED)== FWNODE_FLAG_MULTI_LINKED;
NAK (as far as I understood the context of the comment and the change itself).
These flags are for devlink, we do not mix FW properties with those internal flags anyhow. The comment suggests that this should be a property. Also commit message doesn't explain the relation to devlink.
On 8/15/22 00:46, Andy Shevchenko wrote:
On Sun, Aug 14, 2022 at 11:31 AM Khalid Masum khalid.masum.92@gmail.com wrote:
According to the TODO, In sw_bus_master_add, bus->multi_link is to be populated with properties from FW node props. Make this happen by creating a new fwnode_handle flag FWNODE_FLAG_MULTI_LINKED and use the flag to store the multi_link value from intel_link_startup. Use this flag to initialize bus->multi_link.
...
/* * Initialize multi_link flag
* TODO: populate this flag by reading property from FW node */bus->multi_link = false;
bus->multi_link = (fwnode->flags & FWNODE_FLAG_MULTI_LINKED)== FWNODE_FLAG_MULTI_LINKED;NAK (as far as I understood the context of the comment and the change itself).
These flags are for devlink, we do not mix FW properties with those internal flags anyhow. The comment suggests that this should be az property. Also commit message doesn't explain the relation to devlink.
That is a good information to know. Thanks.
I shall try to find out if I can somehow get multi_link's value from fwnode in any other way and look into devlink in the process.
If you have any suggestions regarding this TODO, please let me know.
Thanks, -- Khalid Masum
On 8/15/22 06:28, Khalid Masum wrote:
On 8/15/22 00:46, Andy Shevchenko wrote:
On Sun, Aug 14, 2022 at 11:31 AM Khalid Masum khalid.masum.92@gmail.com wrote:
According to the TODO, In sw_bus_master_add, bus->multi_link is to be populated with properties from FW node props. Make this happen by creating a new fwnode_handle flag FWNODE_FLAG_MULTI_LINKED and use the flag to store the multi_link value from intel_link_startup. Use this flag to initialize bus->multi_link.
...
/* * Initialize multi_link flag - * TODO: populate this flag by reading property from FW node */ - bus->multi_link = false; + bus->multi_link = (fwnode->flags & FWNODE_FLAG_MULTI_LINKED) + == FWNODE_FLAG_MULTI_LINKED;
NAK (as far as I understood the context of the comment and the change itself).
These flags are for devlink, we do not mix FW properties with those internal flags anyhow. The comment suggests that this should be az property. Also commit message doesn't explain the relation to devlink.
That is a good information to know. Thanks.
I shall try to find out if I can somehow get multi_link's value from fwnode in any other way and look into devlink in the process.
If you have any suggestions regarding this TODO, please let me know.
The suggestion is to remove the TODO and leave the code as is: the capabilities enabled for multi-link are required as part of the programming sequences, even when a stream uses a single link we still use the syncArm/syncGo sequences.
Please don't change this.
On 8/15/22 14:16, Pierre-Louis Bossart wrote:
On 8/15/22 06:28, Khalid Masum wrote:
On 8/15/22 00:46, Andy Shevchenko wrote:
On Sun, Aug 14, 2022 at 11:31 AM Khalid Masum khalid.masum.92@gmail.com wrote:
According to the TODO, In sw_bus_master_add, bus->multi_link is to be populated with properties from FW node props. Make this happen by creating a new fwnode_handle flag FWNODE_FLAG_MULTI_LINKED and use the flag to store the multi_link value from intel_link_startup. Use this flag to initialize bus->multi_link.
...
/* * Initialize multi_link flag - * TODO: populate this flag by reading property from FW node */ - bus->multi_link = false; + bus->multi_link = (fwnode->flags & FWNODE_FLAG_MULTI_LINKED) + == FWNODE_FLAG_MULTI_LINKED;
NAK (as far as I understood the context of the comment and the change itself).
These flags are for devlink, we do not mix FW properties with those internal flags anyhow. The comment suggests that this should be az property. Also commit message doesn't explain the relation to devlink.
That is a good information to know. Thanks.
I shall try to find out if I can somehow get multi_link's value from fwnode in any other way and look into devlink in the process.
If you have any suggestions regarding this TODO, please let me know.
The suggestion is to remove the TODO and leave the code as is: the capabilities enabled for multi-link are required as part of the programming sequences, even when a stream uses a single link we still use the syncArm/syncGo sequences.
Please don't change this.
Thanks for the suggestion! I shall send a patch with the TODO removed, leaving the code as is.
-- Khalid Masum
participants (5)
-
Andy Shevchenko -
Greg KH -
Greg KH -
Khalid Masum -
Pierre-Louis Bossart