[alsa-devel] [PATCH v3 1/2] ASoC: Add devicetree support for CS42L52

This patch adds device tree support for the CS42L52 Codec
v3 Adds better descriptors for platform data. Change mic differential setting to boolean Change chgfreq to chgfreq-divisor Add vendor cirrus to of properties
Signed-off-by: Brian Austin brian.austin@cirrus.com --- sound/soc/codecs/cs42l52.c | 45 ++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 42 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c index e68450e..ed3c20f 100644 --- a/sound/soc/codecs/cs42l52.c +++ b/sound/soc/codecs/cs42l52.c @@ -17,7 +17,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> -#include <linux/gpio.h> +#include <linux/of_gpio.h> #include <linux/pm.h> #include <linux/i2c.h> #include <linux/input.h> @@ -1193,6 +1193,7 @@ static int cs42l52_i2c_probe(struct i2c_client *i2c_client, int ret; unsigned int devid = 0; unsigned int reg; + u32 val32;
cs42l52 = devm_kzalloc(&i2c_client->dev, sizeof(struct cs42l52_private), GFP_KERNEL); @@ -1206,9 +1207,39 @@ static int cs42l52_i2c_probe(struct i2c_client *i2c_client, dev_err(&i2c_client->dev, "regmap_init() failed: %d\n", ret); return ret; } - - if (pdata) + if (pdata) { + cs42l52->pdata = *pdata; + } else { + pdata = devm_kzalloc(&i2c_client->dev, + sizeof(struct cs42l52_platform_data), + GFP_KERNEL); + if (!pdata) { + dev_err(&i2c_client->dev, "could not allocate pdata\n"); + return -ENOMEM; + } + if (i2c_client->dev.of_node) { + if (of_property_read_bool(i2c_client->dev.of_node, + "cirrus,mica-differential-cfg")) + pdata->mica_diff_cfg = true; + + if (of_property_read_bool(i2c_client->dev.of_node, + "cirrus,micb-differential-cfg")) + pdata->micb_diff_cfg = true; + + if (of_property_read_u32(i2c_client->dev.of_node, + "cirrus,micbias-lvl", &val32) >= 0) + pdata->micbias_lvl = val32; + + if (of_property_read_u32(i2c_client->dev.of_node, + "cirrus,chgfreq-divisor", &val32) >= 0) + pdata->chgfreq_divisor = val32; + + pdata->reset_gpio = + of_get_named_gpio(i2c_client->dev.of_node, + "cirrus,reset-gpio", 0); + } cs42l52->pdata = *pdata; + }
if (cs42l52->pdata.reset_gpio) { ret = gpio_request_one(cs42l52->pdata.reset_gpio, @@ -1280,6 +1311,13 @@ static int cs42l52_i2c_remove(struct i2c_client *client) return 0; }
+static const struct of_device_id cs42l52_of_match[] = { + { .compatible = "cirrus,cs42l52", }, + {}, +}; +MODULE_DEVICE_TABLE(of, cs42l52_of_match); + + static const struct i2c_device_id cs42l52_id[] = { { "cs42l52", 0 }, { } @@ -1290,6 +1328,7 @@ static struct i2c_driver cs42l52_i2c_driver = { .driver = { .name = "cs42l52", .owner = THIS_MODULE, + .of_match_table = cs42l52_of_match, }, .id_table = cs42l52_id, .probe = cs42l52_i2c_probe,

v3 Adds better descriptors for platform data. Change mic differential setting to boolean Change chgfreq to chgfreq-divisor Add vendor cirrus to properties Chgfreq values in decimal
Signed-off-by: Brian Austin brian.austin@cirrus.com --- .../devicetree/bindings/sound/cs42l52.txt | 46 ++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/cs42l52.txt
diff --git a/Documentation/devicetree/bindings/sound/cs42l52.txt b/Documentation/devicetree/bindings/sound/cs42l52.txt new file mode 100644 index 0000000..66ed1be --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cs42l52.txt @@ -0,0 +1,46 @@ +CS42L52 audio CODEC + +Required properties: + + - compatible : "cirrus,cs42l52" + + - reg : the I2C address of the device for I2C + +Optional properties: + + - cirrus,reset-gpio : GPIO controller's phandle and the number + of the GPIO used to reset the codec. + + - cirrus,chgfreq-divisor : Values used to set the Charge Pump Frequency. + Allowable values of 0x00 through 0x0F. These are raw values written to the + register, not the actual frequency. The frequency is determined by the following. + Frequency = (64xFs)/(N+2) + N = chgfreq_val + Fs = Sample Rate (variable) + + - cirrus,mica-differential-cfg : boolean, If present, then the MICA input is configured + as a differential input. If not present then the MICA input is configured as + Single-ended input. Single-ended mode allows for MIC1 or MIC2 muxing for input. + + - cirrus,micb-differential-cfg : boolean, If present, then the MICB input is configured + as a differential input. If not present then the MICB input is configured as + Single-ended input. Single-ended mode allows for MIC1 or MIC2 muxing for input. + + - cirrus,micbias-lvl: Set the output voltage level on the MICBIAS Pin + 0 = 0.5 x VA + 1 = 0.6 x VA + 2 = 0.7 x VA + 3 = 0.8 x VA + 4 = 0.83 x VA + 5 = 0.91 x VA + +Example: + +codec: codec@4a { + compatible = "cirrus,cs42l52"; + reg = <0x4a>; + reset-gpio = <&gpio 10 0>; + cirrus,chgfreq-divisor = <0x05>; + cirrus.mica-differential-cfg; + cirrus,micbias-lvl = <5>; +};
participants (2)
-
Brian Austin
-
Mark Brown