Complete the DTS for tas2781

Signed-off-by: Kevin Lu luminlong@139.com --- .../devicetree/bindings/sound/ti,tas2781.yaml | 122 ++++++++++++++++++ 1 file changed, 122 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ti,tas2781.yaml

diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml new file mode 100644 index 0000000..7d73f46 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,tas2781.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TAS2781 Smart PA + +maintainers: + - Shenghao Ding shenghao-ding@ti.com + - Kevin Lu kevin-lu@ti.com + +description: | + The TAS2781 is a mono, digital input Class-D audio amplifier + optimized for efficiently driving high peak power into small + loudspeakers. Integrated an on-chip DSP supports Texas Instruments + Smart Amp speaker protection algorithm. The integrated speaker + voltage and current sense provides for real time + monitoring of loudspeaker behavior. + +properties: + compatible: + enum: + - ti,tas2781 + + reg: + maxItems: 1 + description: | + I2C address of the device can be in range from 0x38 to 0x40. + + ti,audio-slots: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + description: | + This item is used to store the i2c address of the device + for deifferent audio slots. It is not required for Mono case. + + ti,global-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + This item is used to store the generic i2c address of + all the tas2781 devices for I2C broadcast during the multi-device + writes, useless in mono case. + + ti,reset-gpios: + minItems: 1 + maxItems: 4 + description: GPIO specifier for the reset pin. + + ti,irq-gpio: + maxItems: 1 + description: GPIO used to interrupts the device. + + '#sound-dai-cells': + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + /* example with mono support */ + #address-cells = <1>; + #size-cells = <0>; + mono: codec@38 { + compatible = "ti,tas2781"; + reg = <0x38>; + #sound-dai-cells = <1>; + ti,reset-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + ti,irq-gpio = <&gpio1 15 0>; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + /* Stereo without irq-gpio and global-addr */ + #address-cells = <1>; + #size-cells = <0>; + stereo: codec@38 { + compatible = "ti,tas2781"; + reg = <0x38>; + #sound-dai-cells = <1>; + ti,audio-slots = < 0x38 /* left-channel */ + 0x39 /* right-channel */ + >; + ti,reset-gpios = < &gpio1 10 GPIO_ACTIVE_HIGH + &gpio1 11 GPIO_ACTIVE_HIGH + >; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + /* example with quad support, such as tablet or pad device */ + #address-cells = <1>; + #size-cells = <0>; + quad: codec@38 { + compatible = "ti,tas2781"; + reg = <0x38>; + #sound-dai-cells = <1>; + ti,audio-slots = < 0x38 /* topleft-channel */ + 0x39 /* topright-channel */ + 0x3a /* bottomleft-channel */ + 0x3b /* bottomright-channel */ + >; + ti,global-addr = <0x40>; + ti,reset-gpios = < &gpio1 10 GPIO_ACTIVE_HIGH + &gpio1 11 GPIO_ACTIVE_HIGH + &gpio1 12 GPIO_ACTIVE_HIGH + &gpio1 13 GPIO_ACTIVE_HIGH + >; + ti,irq-gpio = <&gpio1 15 0>; + }; + }; +...