...

seem internal subwoofer only use one channel and don't have any stereo

to

...

mono downmix according to your patch

It is not easy to assign different name to internal 4.1 and external 5.1 speaker when alc888 only has five DAC

Some playback volume control must be shared

If you know what's missing, you could send a few lines of code and I will

test

it, otherwise I'll have to experiment on my own.

https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/patch/sound/pci... c3e837bbcc03e39991da5dd1f791c0 6cde9f7a45

As your patch indicate internal subwoofer use external center speaker channel and your codec does not support L/R swap

You may need to reserve Audio mixer 0x26 for internal subwoofer playback volume by restrict the connection of the internal rear speaker

excluding 0x26 so that last DAC can be assigned to the internal subwoofer similar to alc889_fixup_dac_route

void alc888_fixup_dac_route(struct hda_codec *codec, const struct alc_fixup *fix, int action) { if (action == ALC_FIXUP_ACT_PRE_PROBE) {

hda_nid_t conn1[4] = { 0x0c, 0x0d, 0x0e, 0x0f};

snd_hda_override_conn_list(codec, 0x17, 4, conn1);

} else if (action == ALC_FIXUP_ACT_PROBE) { conn[5] = { 0x0c, 0x0d, 0x0e, 0x0f, 0x26 }; snd_hda_override_conn_list(codec, 0x17, 5, conn);

} }

https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/patch/sound/pci... c3e837bbcc03e39991da5dd1f791c0 6cde9f7a45

...

Do you mean internal subwoofer has low pass filter

I don't know. How to check it?

...

what do you mean when you say 4.1 worked fine ?

External 5.1 speakers working as 4.1 speakers because such profile was

set.

...

The channel map of internal 4.1 speaker are different from external 5.1 speaker

Recently I also made such conclusion.

https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/?id=2d33...

Seem 4.1 is not defined in snd_pcm_std_chmap and you need to define and add your 4.1 chmap similar to 2.1

https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/?id=ee81...