Re: [alsa-devel] Issue with creative Xfi PCIe ca0110-IBG
Takashi Iwai <tiwai <at> suse.de> writes:
At Wed, 14 Oct 2009 18:03:15 +0200, Guillem Solà wrote:
Takashi Iwai wrote:
At Tue, 13 Oct 2009 18:59:23 +0200, Guillem Solà wrote:
Takashi Iwai wrote:
At Tue, 13 Oct 2009 17:01:35 +0200, Guillem Solà wrote:
Takashi Iwai wrote:
> At Tue, 13 Oct 2009 16:12:47 +0200, > Guillem Solà wrote: > > > >> Takashi Iwai wrote: >> >> >> >>> At Tue, 13 Oct 2009 14:10:44 +0200, >>> Guillem Solà wrote: >>> >>> >>>> Takashi Iwai wrote: >>>> >>>> >>>> >>>>> It shows the address 1. So, my patch doesn't work, as it
assumes
>>>>> address 0. Replace it with 1, and pass probe_mask=0x02. >>>>> >>>>> >>>>> Takashi >>>>> >>>>> >>>>> >>>> Yeah great, it's working again! >>>> >>>> I did modprobe snd-hda-intel probe_mask=0x03 instead of
mask=0x02 to
>>>> make it work >>>> >>>> and the patch let this way ( I changed both return 1 and
addr=1)
>>>> >>>> >>>> >>>> >>> Now the question is whether probe_mask=0x03 (or 0x02) works
without
>>> this patch. How is it? >>> >>> >>> thanks, >>> >>> >>> >>> >>> >> Hi, >> >> after few tests I can conclude that it could work with and
without the
>> patch. The same happens with modprobe snd-hda-intel
probe_mask=0x03 or
>> 0x02 both can work. >> >> >> > OK, good to hear. > > > > >> So it seems to be fickle because not all the times you
modprobe the
>> intel module it worked. >> >> > Do you mean it's still unstable even with probe_mask option,
or it is
> when without? > > If probe_mask fixes its fickleness (or flirtation :), the
patch below
> should help. It will set the default probe_mask for your device. > Give it a try. > > > Takashi > Hi,
By fickle I mean that when modprobing hda-intel module
sometimes it
works fine and others cannot get audio although the system
seems to
always recognize the card, and yes, I'm always using
probe_mask=0x02 option.
Actually, about one of five times I can successfully load the
module. As
I said the first patch doesn't affect, it has been only the
casualty
that made me believe it did something.
Hm, then it's still puzzling what causes the problem in the recent kernel. Or is it coincidence?
Uff, really don't know what to say, when I thought I saw some
light...
I've been testing with 2.6.31-rc6 and 2.6.31 (final) with and
without
patches and maybe is only the probe_mask option what make it work
sometimes.
Perhaps I did bisect bad and wasn't deadff1665491afce124a8ff83f00f784161f660 first bad commit?
Possible. But, before bisecting, we should be really sure which release was really OK. Did 2.6.30 work without any problems?
Hi,
AFAIK in 2.6.30 ca0110 was not implemented. I see it start working in 2.6.31-rc3 and did a two weeks running test with 2.6.31-rc5.
So I bisected from 2.6.31-rc6 to 2.6.31-rc5
OK. It's possible that a regression occurs at rc6 because of the core HD-audio changes. But, I still wonder why the patch doesn't change anything.
At least, it'd be nice if you can reconfirm that rc5 is really working stably. You can just copy sound/pci/hda/* over any newer kernels.
Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel <at> alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Hi,
I have the same model of sound card and can't make it work. I saw that this conversation has stalled so I'm going to give informations about what I've tested.
First thing, using one of the latest alsa-driver snapshots with a 2.6.31-gentoo-r2 kernel, I got this in dmesg when loading the snd-hda-intel driver : [ 111.287946] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 111.287968] HDA Intel 0000:03:00.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 [ 111.567237] hda-intel: spurious response 0x0:0x0, last cmd=0x000000 [ 112.575093] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x107f0d00 [ 113.583158] hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x107f0d00
And then, when I tried to play a sound a few times : [ 167.997029] hda_codec: rates == 0 (nid=0x12, val=0x0, ovrd=0) [ 173.053323] __ratelimit: 1 callbacks suppressed [ 174.124799] hda_codec: rates == 0 (nid=0x12, val=0x0, ovrd=0) [ 287.496606] hda_codec: rates == 0 (nid=0x12, val=0x0, ovrd=0) [ 287.496934] __ratelimit: 20 callbacks suppressed
I made my tests with aplay and mplayer, they just stall and I don't get any sound.
Today, after reading this thread I tried making it work with the 2.6.31 kernel from rc3 to rc6 (without gentoo patches), none of them worked. I compiled them with debug and this is the output of dmesg when I load the driver : [ 1778.639675] HDA Intel 0000:03:00.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 [ 1778.639778] ALSA sound/pci/hda/hda_intel.c:2334: chipset global capabilities = 0x3300 [ 1778.663717] ALSA sound/pci/hda/hda_intel.c:823: codec_mask = 0x2 [ 1778.663830] ALSA sound/pci/hda/hda_intel.c:1252: codec #1 probed OK [ 1778.695745] ALSA sound/pci/hda/hda_codec.c:3857: autoconfig: line_outs=4 (0xb/0xd/0xc/0xe/0x0) [ 1778.695753] ALSA sound/pci/hda/hda_codec.c:3861: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 1778.695760] ALSA sound/pci/hda/hda_codec.c:3865: hp_outs=1 (0xf/0x0/0x0/0x0/0x0) [ 1778.695767] ALSA sound/pci/hda/hda_codec.c:3866: mono: mono_out=0x0 [ 1778.695772] ALSA sound/pci/hda/hda_codec.c:3869: dig-out=0x12/0x0 [ 1778.695777] ALSA sound/pci/hda/hda_codec.c:3877: inputs: mic=0x11, fmic=0x0, line=0x10, fline=0x0, cd=0x0, aux=0x0 [ 1778.695785] ALSA sound/pci/hda/hda_codec.c:3879: dig-in=0x13
And when I try to play a sound : [ 1845.100435] ALSA sound/pci/hda/hda_intel.c:1557: azx_pcm_prepare: bufsize=0x8000, format=0x13 [ 1845.100457] ALSA sound/pci/hda/hda_codec.c:1076: hda_codec_cleanup_stream: NID=0x12 [ 1845.100466] ALSA sound/pci/hda/hda_codec.c:1063: hda_codec_setup_stream: NID=0x2, stream=0x4, channel=0, format=0x13 [ 1845.108003] ALSA sound/pci/hda/hda_codec.c:1063: hda_codec_setup_stream: NID=0x6, stream=0x4, channel=0, format=0x13 [ 1845.116000] ALSA sound/pci/hda/hda_codec.c:1063: hda_codec_setup_stream: NID=0x4, stream=0x4, channel=2, format=0x13 [ 1845.124001] ALSA sound/pci/hda/hda_codec.c:1063: hda_codec_setup_stream: NID=0x3, stream=0x4, channel=0, format=0x13 [ 1845.132001] ALSA sound/pci/hda/hda_codec.c:1063: hda_codec_setup_stream: NID=0x5, stream=0x4, channel=0, format=0x13 [ 1851.730678] ALSA sound/pci/hda/hda_codec.c:1076: hda_codec_cleanup_stream: NID=0x2 [ 1851.730691] ALSA sound/pci/hda/hda_codec.c:1076: hda_codec_cleanup_stream: NID=0x4 [ 1851.730705] ALSA sound/pci/hda/hda_codec.c:1076: hda_codec_cleanup_stream: NID=0x3 [ 1851.730717] ALSA sound/pci/hda/hda_codec.c:1076: hda_codec_cleanup_stream: NID=0x5 [ 1851.730724] ALSA sound/pci/hda/hda_codec.c:1076: hda_codec_cleanup_stream: NID=0x6
I tried using your patch Takashi, the driver wouldn't load until I put 1 in the address like Guillem did. But even with that sound doesn't work no matter the probe_mask setting I use.
And a last note, I did my tests on the rc versions without rebooting, just removing the module and modprobing it again, but I don't think it matters.
Here's my lspci -vvnn : 02:00.0 PCI bridge [0604]: Creative Labs Device [1102:7006] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=02, secondary=03, subordinate=03, sec-latency=32 Memory behind bridge: fdf00000-fdffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Count=1/16 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [80] Subsystem: Creative Labs Device [1102:0010] Capabilities: [90] Express (v1) PCI/PCI-X Bridge, MSI 00 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry- MaxPayload 512 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSVoil- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
03:00.0 Audio device [0403]: Creative Labs [SB X-Fi Xtreme Audio] CA0110-IBG [1102:0009] Subsystem: Creative Labs Device [1102:0018] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 5000ns max) Interrupt: pin A routed to IRQ 17 Region 0: Memory at fdffc000 (32-bit, non-prefetchable) [size=16K] Capabilities: [dc] Power Management version 3 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel
Output from alsa-info : http://www.alsa-project.org/db/?f=473df043d8633b85a0a5319d2e7a73c4a13d2761
Hope this gives you some hint to solve our problem.
Regards,
Philippe
participants (1)
-
Philippe