[alsa-devel] [PATCH v3 0/5] Stripe control functionality
Background ==========
Azalia Controller fetches command and audio data via DMA and send them to codec through SDO(Serial Data Out) lines. SDO is for outboung and it broadcasts to all codecs. There is atleast one SDO line present, but there can be multiple SDO lines supported for extended bandwidth. This is essential when a platform supports multiple hdmi/dp sinks and there is a requirement for higher resolution audio playback. In such cases simultaneous audio playback data can be striped across multiple SDOs.
Global Capabilities(GCAP) Register indicates the capabilities of the controller. Bits 2:1 of GCAP can be read to know the number of supported SDO lines (below is from HD audio spec) 00: 1 SDO 01: 2 SDO 10: 4 SDO 11: Reserved
Stripe control verb reports and controls the stripe capability of an Audio Output Converter. This verb needs to be implemented only for an audio output converter and only if the stripe bit of the Audio Widget Capabilities parameter is 1. Stripe control: get code(0xf24) and set code(0x724)
Change log ==========
v1-->v2: -------- Patch 1: "ALSA: hda: add verbs for stripe control" * no change
Patch 2: "ALSA: hda: Add api to program stripe control bits" * no change
Patch 3: "ALSA: hda: add register offset for stripe control" * added mask for stripe control programming
Patch 4: "ALSA: hda: program stripe bits for controller" * used stripe control mask instead of hard coded value
Patch 5: "ALSA: hda: program stripe control for codec" * added conditional check to know if striping is supported. If supported, then only stripe verb is implemented.
v2-->v3: -------- Patch 1: "ALSA: hda: add verbs for stripe control" * no change Patch 2: "ALSA: hda: Add api to program stripe control bits" * added braces around stripe value calucation as per spec Patch 3: "ALSA: hda: add register offset for stripe control" * no change Patch 4: "ALSA: hda: program stripe bits for controller" * no change Patch 5: "ALSA: hda: program stripe control for codec" * no change
===========
Sameer Pujar (5): ALSA: hda: add verbs for stripe control ALSA: hda: Add api to program stripe control bits ALSA: hda: add register offset for stripe control ALSA: hda: program stripe bits for controller ALSA: hda: program stripe control for codec
include/sound/hda_register.h | 2 ++ include/sound/hda_verbs.h | 2 ++ include/sound/hdaudio.h | 3 +++ sound/hda/hdac_stream.c | 40 ++++++++++++++++++++++++++++++++++++++++ sound/pci/hda/patch_hdmi.c | 10 +++++++++- 5 files changed, 56 insertions(+), 1 deletion(-)
Controllers can support multiple Serial Data Out(SDO) lines, for extended outbound bandwidth, to pump data to all codecs on the link. Codecs can sample data present on SDO.
Add verbs AC_VERB_GET_STRIPE_CONTROL and AC_VERB_SET_STRIPE_CONTROL These can be used to program usage of SDO lines for codec.
Signed-off-by: Sameer Pujar spujar@nvidia.com Reviewed-by: Mohan Kumar D mkumard@nvidia.com Reviewed-by: Ravindra Lokhande rlokhande@nvidia.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- include/sound/hda_verbs.h | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/include/sound/hda_verbs.h b/include/sound/hda_verbs.h index 2a8573a..e36b775 100644 --- a/include/sound/hda_verbs.h +++ b/include/sound/hda_verbs.h @@ -66,6 +66,7 @@ enum { #define AC_VERB_GET_CONFIG_DEFAULT 0x0f1c /* f20: AFG/MFG */ #define AC_VERB_GET_SUBSYSTEM_ID 0x0f20 +#define AC_VERB_GET_STRIPE_CONTROL 0x0f24 #define AC_VERB_GET_CVT_CHAN_COUNT 0x0f2d #define AC_VERB_GET_HDMI_DIP_SIZE 0x0f2e #define AC_VERB_GET_HDMI_ELDD 0x0f2f @@ -110,6 +111,7 @@ enum { #define AC_VERB_SET_CONFIG_DEFAULT_BYTES_3 0x71f #define AC_VERB_SET_EAPD 0x788 #define AC_VERB_SET_CODEC_RESET 0x7ff +#define AC_VERB_SET_STRIPE_CONTROL 0x724 #define AC_VERB_SET_CVT_CHAN_COUNT 0x72d #define AC_VERB_SET_HDMI_DIP_INDEX 0x730 #define AC_VERB_SET_HDMI_DIP_DATA 0x731
Controllers and codecs can support striping of audio out across multiple SDO lines. The number of supported SDO lines can be specific to chip. GCAP register can be read to know the maximum supported SDO lines.
snd_hdac_get_stream_stripe_ctl() is exposed to program stripe bits on controller and codec side. stripe value: 0 for 1SDO, 1 for 2SDO, 2 for 4SDO lines, etc.,
Signed-off-by: Sameer Pujar spujar@nvidia.com Reviewed-by: Mohan Kumar D mkumard@nvidia.com Reviewed-by: Ravindra Lokhande rlokhande@nvidia.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- include/sound/hdaudio.h | 3 +++ sound/hda/hdac_stream.c | 34 ++++++++++++++++++++++++++++++++++ 2 files changed, 37 insertions(+)
diff --git a/include/sound/hdaudio.h b/include/sound/hdaudio.h index b4fa1c7..45f944d 100644 --- a/include/sound/hdaudio.h +++ b/include/sound/hdaudio.h @@ -539,6 +539,9 @@ void snd_hdac_stream_sync(struct hdac_stream *azx_dev, bool start, unsigned int streams); void snd_hdac_stream_timecounter_init(struct hdac_stream *azx_dev, unsigned int streams); +int snd_hdac_get_stream_stripe_ctl(struct hdac_bus *bus, + struct snd_pcm_substream *substream); + /* * macros for easy use */ diff --git a/sound/hda/hdac_stream.c b/sound/hda/hdac_stream.c index ba73a33..820694a 100644 --- a/sound/hda/hdac_stream.c +++ b/sound/hda/hdac_stream.c @@ -13,6 +13,40 @@ #include "trace.h"
/** + * snd_hdac_get_stream_stripe_ctl - get stripe control value + * @bus: HD-audio core bus + * @substream: PCM substream + */ +int snd_hdac_get_stream_stripe_ctl(struct hdac_bus *bus, + struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + unsigned int channels = runtime->channels, + rate = runtime->rate, + bits_per_sample = runtime->sample_bits, + max_sdo_lines, value, sdo_line; + + /* T_AZA_GCAP_NSDO is 1:2 bitfields in GCAP */ + max_sdo_lines = snd_hdac_chip_readl(bus, GCAP) & AZX_GCAP_NSDO; + + /* following is from HD audio spec */ + for (sdo_line = max_sdo_lines; sdo_line > 0; sdo_line >>= 1) { + if (rate > 48000) + value = (channels * bits_per_sample * + (rate / 48000)) / sdo_line; + else + value = (channels * bits_per_sample) / sdo_line; + + if (value >= 8) + break; + } + + /* stripe value: 0 for 1SDO, 1 for 2SDO, 2 for 4SDO lines */ + return sdo_line >> 1; +} +EXPORT_SYMBOL_GPL(snd_hdac_get_stream_stripe_ctl); + +/** * snd_hdac_stream_init - initialize each stream (aka device) * @bus: HD-audio core bus * @azx_dev: HD-audio core stream object to initialize
bits 16:17 in SD_CTL register refer to stripe control. Added an offset register(AZX_REG_SD_CTL_3B) to have exclusive read/write of corresponding register byte. This helps to avoid unnecessary 32-bit read/write of SD_CTL whenever only stripe or other bits of corresponding byte need to be updated. Also HD audio spec defines SD_CTL as 3 byte register.
SD_CTL_STRIPE_MASK(0x3) can be used for stripe control programming and when updating AZX_REG_SD_CTL_3B.
Signed-off-by: Sameer Pujar spujar@nvidia.com Reviewed-by: Mohan Kumar D mkumard@nvidia.com Reviewed-by: Ravindra Lokhande rlokhande@nvidia.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- include/sound/hda_register.h | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/include/sound/hda_register.h b/include/sound/hda_register.h index 2ab39fb..0fd3929 100644 --- a/include/sound/hda_register.h +++ b/include/sound/hda_register.h @@ -79,6 +79,7 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
/* stream register offsets from stream base */ #define AZX_REG_SD_CTL 0x00 +#define AZX_REG_SD_CTL_3B 0x02 /* 3rd byte of SD_CTL register */ #define AZX_REG_SD_STS 0x03 #define AZX_REG_SD_LPIB 0x04 #define AZX_REG_SD_CBL 0x08 @@ -165,6 +166,7 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 }; #define SD_INT_COMPLETE 0x04 /* completion interrupt */ #define SD_INT_MASK (SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\ SD_INT_COMPLETE) +#define SD_CTL_STRIPE_MASK 0x3 /* stripe control mask */
/* SD_STS */ #define SD_STS_FIFO_READY 0x20 /* FIFO ready */
Platforms having multiple SORs and hdmi/dp sinks require higher bandwidth to support simultaneous playbacks of higher resolution. If hda controller supports multiple SDO lines, STRIPE can be used to indicate how many of the SDO lines the stream should be striped across.
During stream start stripe control bits are programmed to use given number of sdo lines and the same is cleared during stream stop.
Signed-off-by: Sameer Pujar spujar@nvidia.com Reviewed-by: Mohan Kumar D mkumard@nvidia.com Reviewed-by: Ravindra Lokhande rlokhande@nvidia.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- sound/hda/hdac_stream.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/sound/hda/hdac_stream.c b/sound/hda/hdac_stream.c index 820694a..f5dd288 100644 --- a/sound/hda/hdac_stream.c +++ b/sound/hda/hdac_stream.c @@ -82,6 +82,7 @@ EXPORT_SYMBOL_GPL(snd_hdac_stream_init); void snd_hdac_stream_start(struct hdac_stream *azx_dev, bool fresh_start) { struct hdac_bus *bus = azx_dev->bus; + int stripe_ctl;
trace_snd_hdac_stream_start(bus, azx_dev);
@@ -93,6 +94,10 @@ void snd_hdac_stream_start(struct hdac_stream *azx_dev, bool fresh_start) snd_hdac_chip_updatel(bus, INTCTL, 1 << azx_dev->index, 1 << azx_dev->index); + /* set stripe control */ + stripe_ctl = snd_hdac_get_stream_stripe_ctl(bus, azx_dev->substream); + snd_hdac_stream_updateb(azx_dev, SD_CTL_3B, SD_CTL_STRIPE_MASK, + stripe_ctl); /* set DMA start and interrupt mask */ snd_hdac_stream_updateb(azx_dev, SD_CTL, 0, SD_CTL_DMA_START | SD_INT_MASK); @@ -109,6 +114,7 @@ void snd_hdac_stream_clear(struct hdac_stream *azx_dev) snd_hdac_stream_updateb(azx_dev, SD_CTL, SD_CTL_DMA_START | SD_INT_MASK, 0); snd_hdac_stream_writeb(azx_dev, SD_STS, SD_INT_MASK); /* to be sure */ + snd_hdac_stream_updateb(azx_dev, SD_CTL_3B, SD_CTL_STRIPE_MASK, 0); azx_dev->running = false; } EXPORT_SYMBOL_GPL(snd_hdac_stream_clear);
Program codec stripe through AC_VERB_SET_STRIPE_CONTROL to use multiple sdo lines if supported. Audio needs to be striped across number of sdo lines for simultaneous playbacks of higher resolutions to work. This needs to be implemented only for an Audio Output Converter and only if the stripe bit(AC_WCAP_STRIPE) of Audio Widget Capabilities parameter is 1.
Signed-off-by: Sameer Pujar spujar@nvidia.com Reviewed-by: Mohan Kumar D mkumard@nvidia.com Reviewed-by: Ravindra Lokhande rlokhande@nvidia.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- sound/pci/hda/patch_hdmi.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 46f88dc..73d7042f 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1865,7 +1865,7 @@ static int generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo, hda_nid_t pin_nid; struct snd_pcm_runtime *runtime = substream->runtime; bool non_pcm; - int pinctl; + int pinctl, stripe; int err = 0;
mutex_lock(&spec->pcm_lock); @@ -1909,6 +1909,14 @@ static int generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo, per_pin->channels = substream->runtime->channels; per_pin->setup = true;
+ if (get_wcaps(codec, cvt_nid) & AC_WCAP_STRIPE) { + stripe = snd_hdac_get_stream_stripe_ctl(&codec->bus->core, + substream); + snd_hda_codec_write(codec, cvt_nid, 0, + AC_VERB_SET_STRIPE_CONTROL, + stripe); + } + hdmi_setup_audio_infoframe(codec, per_pin, non_pcm); mutex_unlock(&per_pin->lock); if (spec->dyn_pin_out) {
On Mon, 14 Jan 2019 19:21:07 +0100, Sameer Pujar wrote:
Background
Azalia Controller fetches command and audio data via DMA and send them to codec through SDO(Serial Data Out) lines. SDO is for outboung and it broadcasts to all codecs. There is atleast one SDO line present, but there can be multiple SDO lines supported for extended bandwidth. This is essential when a platform supports multiple hdmi/dp sinks and there is a requirement for higher resolution audio playback. In such cases simultaneous audio playback data can be striped across multiple SDOs.
Global Capabilities(GCAP) Register indicates the capabilities of the controller. Bits 2:1 of GCAP can be read to know the number of supported SDO lines (below is from HD audio spec) 00: 1 SDO 01: 2 SDO 10: 4 SDO 11: Reserved
Stripe control verb reports and controls the stripe capability of an Audio Output Converter. This verb needs to be implemented only for an audio output converter and only if the stripe bit of the Audio Widget Capabilities parameter is 1. Stripe control: get code(0xf24) and set code(0x724)
Change log
v1-->v2:
Patch 1: "ALSA: hda: add verbs for stripe control" * no change
Patch 2: "ALSA: hda: Add api to program stripe control bits" * no change
Patch 3: "ALSA: hda: add register offset for stripe control" * added mask for stripe control programming
Patch 4: "ALSA: hda: program stripe bits for controller" * used stripe control mask instead of hard coded value
Patch 5: "ALSA: hda: program stripe control for codec" * added conditional check to know if striping is supported. If supported, then only stripe verb is implemented.
v2-->v3:
Patch 1: "ALSA: hda: add verbs for stripe control" * no change Patch 2: "ALSA: hda: Add api to program stripe control bits" * added braces around stripe value calucation as per spec Patch 3: "ALSA: hda: add register offset for stripe control" * no change Patch 4: "ALSA: hda: program stripe bits for controller" * no change Patch 5: "ALSA: hda: program stripe control for codec" * no change
===========
Sameer Pujar (5): ALSA: hda: add verbs for stripe control ALSA: hda: Add api to program stripe control bits ALSA: hda: add register offset for stripe control ALSA: hda: program stripe bits for controller ALSA: hda: program stripe control for codec
Applied all five patches now. Thanks.
Takashi
participants (2)
-
Sameer Pujar
-
Takashi Iwai