New subject: [alsa-devel] [RFC v5]update broken web addresses in the kernel.

28 Sep 2010

diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index bf88f71..aa0e0c5 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -15,8 +15,8 @@

May be copied or modified under the terms of the GNU General Public License
Based in part on the ITE vendor provided SCSI driver.




Documentation available from



http://www.ite.com.tw/pc/IT8212F_V04.pdf





Documentation available from IT8212F_V04.pdf



http://www.ite.com.tw/EN/products_more.aspx?CategoryID=3&ID=5,91
Some other documents are NDA.

The ITE8212 isn't exactly a standard IDE controller. It has two



diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig
index be7461c..31c6010 100644
--- a/drivers/atm/Kconfig
+++ b/drivers/atm/Kconfig
@@ -301,7 +301,7 @@ config ATM_IA
     control memory (128K-1KVC, 512K-4KVC), the size of the packet
     memory (128K, 512K, 1M), and the PHY type (Single/Multi mode OC3,
     UTP155, UTP25, DS3 and E3). Go to:

 	<http://www.iphase.com/products/ClassSheet.cfm?ClassID=ATM>




 	<http://www.iphase.com/>

for more info about the cards. Say Y (or M to compile as a module
   named iphase) here if you have one of these cards.

diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig
index 4b66c69..c8ad619 100644
--- a/drivers/char/agp/Kconfig
+++ b/drivers/char/agp/Kconfig
@@ -34,7 +34,7 @@ config AGP_ALI
     X on the following ALi chipsets.  The supported chipsets
     include M1541, M1621, M1631, M1632, M1641,M1647,and M1651.
     For the ALi-chipset question, ALi suggests you refer to

 <http://www.ali.com.tw/eng/support/index.shtml>.




 <http://www.ali.com.tw/>.


The M1541 chipset can do AGP 1x and 2x, but note that there is an
   acknowledged incompatibility with Matrox G200 cards. Due to


diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c
index e763d33..75b763c 100644
--- a/drivers/char/agp/i460-agp.c
+++ b/drivers/char/agp/i460-agp.c
@@ -1,7 +1,7 @@
 /*

For documentation on the i460 AGP interface, see Chapter 7 (AGP Subsystem) of
the "Intel 460GTX Chipset Software Developer's Manual":



http://developer.intel.com/design/itanium/downloads/24870401s.htm





http://www.intel.com/design/archives/itanium/downloads/248704.htm

*/

/*

460GX support by Chris Ahna christopher.j.ahna@intel.com

diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
index 033e150..0848ca9 100644
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@@ -7,8 +7,8 @@

Intel Corporation, Microsoft Corporation. Advanced Power Management
(APM) BIOS Interface Specification, Revision 1.2, February 1996.




[This document is available from Microsoft at:



http://www.microsoft.com/hwdev/busbios/amp_12.htm]





This document is available from Microsoft at:



http://www.microsoft.com/whdc/archive/amp_12.mspx

*/

#include <linux/module.h>
 #include <linux/poll.h>
diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c
index 7b98c06..3ed20e8 100644
--- a/drivers/char/ipmi/ipmi_bt_sm.c
+++ b/drivers/char/ipmi/ipmi_bt_sm.c
@@ -2,7 +2,7 @@

ipmi_bt_sm.c

The state machine for an Open IPMI BT sub-driver under ipmi_si.c, part



of the driver architecture at http://sourceforge.net/project/openipmi





of the driver architecture at http://sourceforge.net/projects/openipmi

Author:	Rocky Craig first.last@hp.com




diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 7bd7c45..3e94c37 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -1974,8 +1974,7 @@ static int acpi_gpe_irq_setup(struct smi_info *info)
/*

Defined at



http://h21007.www2.hp.com/portal/download/files



/unprot/hpspmi.pdf





http://h21007.www2.hp.com/portal/download/files/unprot/hpspmi.pdf

*/

struct SPMITable {
   s8	Signature[4];
diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c
index a98290d..88dda0c 100644
--- a/drivers/char/n_r3964.c
+++ b/drivers/char/n_r3964.c
@@ -4,7 +4,6 @@

Copyright by
Philips Automation Projects
Kassel (Germany)



http://www.pap-philips.de


This software may be used and distributed according to the terms of
the GNU General Public License, incorporated herein by reference.



diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig
index ffa0efc..6614416 100644
--- a/drivers/char/pcmcia/Kconfig
+++ b/drivers/char/pcmcia/Kconfig
@@ -28,7 +28,7 @@ config CARDMAN_4000
 This kernel driver requires additional userspace support, either
 by the vendor-provided PC/SC ifd_handler (http://www.omnikey.com/),


 or via the cm4000 backend of OpenCT (http://www.opensc.com/).




 or via the cm4000 backend of OpenCT (http://www.opensc-project.org/opensc).




config CARDMAN_4040
   tristate "Omnikey CardMan 4040 support"
@@ -41,7 +41,7 @@ config CARDMAN_4040
     in I/O space.  To use the kernel driver, you will need either the
     PC/SC ifdhandler provided from the Omnikey homepage
     (http://www.omnikey.com/), or a current development version of OpenCT

 (http://www.opensc.org/).




 (http://www.opensc-project.org/opensc).




config IPWIRELESS
   tristate "IPWireless 3G UMTS PCMCIA card support"
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index 4dc338f..f6595ab 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -58,6 +58,6 @@ config TCG_INFINEON
     To compile this driver as a module, choose M here; the module
     will be called tpm_infineon.
     Further information on this driver and the supported hardware

 can be found at http://www.prosec.rub.de/tpm




 can be found at http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/ 




endif # TCG_TPM
diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c
index f584407..76da32e 100644
--- a/drivers/char/tpm/tpm_infineon.c
+++ b/drivers/char/tpm/tpm_infineon.c
@@ -7,7 +7,7 @@

Copyright (C) 2005, Marcel Selhorst m.selhorst@sirrix.com
Sirrix AG - security technologies, http://www.sirrix.com and
Applied Data Security Group, Ruhr-University Bochum, Germany



Project-Homepage: http://www.prosec.rub.de/tpm





Project-Homepage: http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/

This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as



diff --git a/drivers/edac/edac_device_sysfs.c b/drivers/edac/edac_device_sysfs.c
index 0709681..413f0df 100644
--- a/drivers/edac/edac_device_sysfs.c
+++ b/drivers/edac/edac_device_sysfs.c
@@ -1,7 +1,7 @@
 /*

file for managing the edac_device class of devices for EDAC




(C) 2007 SoftwareBitMaker (http://www.softwarebitmaker.com)





(C) 2007 SoftwareBitMaker

This file may be distributed under the terms of the
GNU General Public License.



diff --git a/drivers/edac/i82443bxgx_edac.c b/drivers/edac/i82443bxgx_edac.c
index a2fa1fe..678405a 100644
--- a/drivers/edac/i82443bxgx_edac.c
+++ b/drivers/edac/i82443bxgx_edac.c
@@ -12,7 +12,7 @@

440GX fix by Jason Uhlenkott juhlenko@akamai.com.

Written with reference to 82443BX Host Bridge Datasheet:



http://www.intel.com/design/chipsets/440/documentation.htm





http://download.intel.com/design/chipsets/datashts/29063301.pdf
references to this document given in [].

This module doesn't support the 440LX, but it may be possible to



diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 280c9b5..32e67a1 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -73,8 +73,8 @@ config EFI_PCDP
     on how the driver discovers devices.
 You must also enable the appropriate drivers (serial, VGA, etc.)



 See <http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf>




 See DIG64_HCDPv20_042804.pdf available from


 <http://www.dig64.org/specifications/>




config DELL_RBU
   tristate "BIOS update support for DELL systems via sysfs"
diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
index f287fe7..96c25d9 100644
--- a/drivers/firmware/edd.c
+++ b/drivers/firmware/edd.c
@@ -15,7 +15,7 @@

made in setup.S, copied to safe structures in setup.c,
and presents it in sysfs.




Please see http://linux.dell.com/edd30/results.html for





Please see http://linux.dell.com/edd/results.html for
the list of BIOSs which have been reported to implement EDD.

This program is free software; you can redistribute it and/or modify



diff --git a/drivers/firmware/pcdp.h b/drivers/firmware/pcdp.h
index ce910d6..e098c6e 100644
--- a/drivers/firmware/pcdp.h
+++ b/drivers/firmware/pcdp.h
@@ -1,8 +1,8 @@
 /*

Definitions for PCDP-defined console devices




v1.0a: http://www.dig64.org/specifications/DIG64_HCDPv10a_01.pdf



v2.0:  http://www.dig64.org/specifications/DIG64_PCDPv20.pdf





For DIG64_HCDPv10a_01.pdf and DIG64_PCDPv20.pdf (v10.a and v2.0 resp.),



please see http://www.dig64.org/specifications/

(c) Copyright 2002, 2004 Hewlett-Packard Development Company, L.P.
Khalid Aziz khalid.aziz@hp.com



diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 949326d..58e65f9 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -76,7 +76,7 @@ EXPORT_SYMBOL(drm_mode_debug_printmodeline);

according to the hdisplay, vdisplay, vrefresh.
It is based from the VESA(TM) Coordinated Video Timing Generator by
Graham Loveridge April 9, 2003 available at



http://www.vesa.org/public/CVT/CVTd6r1.xls





http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls

And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt.c.
What I have done is to translate it by using integer calculation.



diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
index 251b631..60befc0 100644
--- a/drivers/hwmon/adm1025.c
+++ b/drivers/hwmon/adm1025.c
@@ -12,7 +12,7 @@

resolution of about 0.5% of the nominal value). Temperature values are
reported with a 1 deg resolution and a 3 deg accuracy. Complete
datasheet can be obtained from Analog's website at:



http://www.analog.com/Analog_Root/productPage/productHome/0,2121,ADM1025,00....





http://www.onsemi.com/PowerSolutions/product.do?id=ADM1025

This driver also supports the ADM1025A, which differs from the ADM1025
only in that it has "open-drain VID inputs while the ADM1025 has



diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index 65335b2..4bf969c 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -6,7 +6,7 @@
 Chip details at:



http://www.analog.com/UploadedFiles/Data_Sheets/779263102ADM1026_a.pdf


http://www.onsemi.com/PowerSolutions/product.do?id=ADM1026
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by


diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
index 9638d58..95cbfb3 100644
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -6,10 +6,10 @@

Datasheets available at:

f75375:



http://www.fintek.com.tw/files/productfiles/2005111152950.pdf





http://www.fintek.com.tw/files/productfiles/F75375_V026P.pdf

f75373:





http://www.fintek.com.tw/files/productfiles/2005111153128.pdf





http://www.fintek.com.tw/files/productfiles/F75373_V025P.pdf

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by



diff --git a/drivers/hwmon/g760a.c b/drivers/hwmon/g760a.c
index 1f63d1a..1d6a6fa 100644
--- a/drivers/hwmon/g760a.c
+++ b/drivers/hwmon/g760a.c
@@ -5,7 +5,7 @@
     Copyright (C) 2007  Herbert Valerio Riedel hvr@gnu.org
 Complete datasheet is available at GMT's website:


 http://www.gmt.com.tw/datasheet/g760a.pdf




 http://www.gmt.com.tw/product/datasheet/EDS-760A.pdf 


This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by


diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
index bf0862a..897702d 100644
--- a/drivers/hwmon/hwmon-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@@ -38,7 +38,7 @@

available at http://developer.intel.com/.

AMD Athlon 64 and AMD Opteron Processors, AMD Publication 26094,



http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/2609...





http://developer.amd.com/documentation/articles/pages/1212200690_2.aspx
Table 74. VID Code Voltages
This corresponds to an arbitrary VRM code of 24 in the functions below.
These CPU models (K8 revision <= E) have 5 VID pins. See also:



diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c
index 4516369..97d98fb 100644
--- a/drivers/ide/hpt366.c
+++ b/drivers/ide/hpt366.c
@@ -12,7 +12,7 @@



HighPoint has its own drivers (open source except for the RAID part)



available from http://www.highpoint-tech.com/BIOS%20+%20Driver/.





available from http://www.highpoint-tech.com/USA_new/service_support.htm
This may be useful to anyone wanting to work on this driver, however  do not
trust  them too much since the code tends to become less and less meaningful
as the time passes... :-/



diff --git a/drivers/ide/ht6560b.c b/drivers/ide/ht6560b.c
index d81e496..808bcdc 100644
--- a/drivers/ide/ht6560b.c
+++ b/drivers/ide/ht6560b.c
@@ -10,7 +10,6 @@

Author:    Mikko Ala-Fossi            maf@iki.fi
        Jan Evert van Grootheest   <j.e.van.grootheest@caiway.nl>






Try:  http://www.maf.iki.fi/~maf/ht6560b/

*/

#define DRV_NAME	"ht6560b"
diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig
index 89d70de..6e35ecc 100644
--- a/drivers/infiniband/Kconfig
+++ b/drivers/infiniband/Kconfig
@@ -16,7 +16,7 @@ config INFINIBAND_USER_MAD
     Userspace InfiniBand Management Datagram (MAD) support.  This
     is the kernel side of the userspace MAD support, which allows
     userspace processes to send and receive MADs. You will also

 need libibumad from <http://www.openib.org>.




 need libibumad from <http://www.openfabrics.org/downloads/management/>.




config INFINIBAND_USER_ACCESS
   tristate "InfiniBand userspace access (verbs and CM)"
@@ -28,7 +28,7 @@ config INFINIBAND_USER_ACCESS
     to set up connections and directly access InfiniBand
     hardware for fast-path operations.  You will also need
     libibverbs, libibcm and a hardware driver library from

 <http://www.openib.org>.




 <http://www.openfabrics.org/git/>.




config INFINIBAND_USER_MEM
   bool
diff --git a/drivers/infiniband/hw/cxgb3/Kconfig b/drivers/infiniband/hw/cxgb3/Kconfig
index 2acec3f..2b6352b 100644
--- a/drivers/infiniband/hw/cxgb3/Kconfig
+++ b/drivers/infiniband/hw/cxgb3/Kconfig
@@ -10,7 +10,7 @@ config INFINIBAND_CXGB3
     our website at http://www.chelsio.com.
 For customer support, please visit our customer support page at


 <http://www.chelsio.com/support.htm>.




 <http://www.chelsio.com/support.html>.


Please send feedback to linux-bugs@chelsio.com.


diff --git a/drivers/infiniband/hw/cxgb4/Kconfig b/drivers/infiniband/hw/cxgb4/Kconfig
index ccb85ea..6b7e6c5 100644
--- a/drivers/infiniband/hw/cxgb4/Kconfig
+++ b/drivers/infiniband/hw/cxgb4/Kconfig
@@ -10,7 +10,7 @@ config INFINIBAND_CXGB4
     our website at http://www.chelsio.com.
 For customer support, please visit our customer support page at


 <http://www.chelsio.com/support.htm>.




 <http://www.chelsio.com/support.html>.


Please send feedback to linux-bugs@chelsio.com.


diff --git a/drivers/infiniband/ulp/iser/Kconfig b/drivers/infiniband/ulp/iser/Kconfig
index b411c51..d00af71 100644
--- a/drivers/infiniband/ulp/iser/Kconfig
+++ b/drivers/infiniband/ulp/iser/Kconfig
@@ -9,4 +9,4 @@ config INFINIBAND_ISER
 The iSER protocol is defined by IETF.
 See <http://www.ietf.org/rfc/rfc5046.txt>


 and <http://www.infinibandta.org/members/spec/Annex_iSER.PDF>




 and <http://members.infinibandta.org/kwspub/spec/Annex_iSER.PDF>



diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c
index 0ffaf2c..e68e497 100644
--- a/drivers/input/joystick/gamecon.c
+++ b/drivers/input/joystick/gamecon.c
@@ -521,9 +521,8 @@ static void gc_multi_process_packet(struct gc *gc)

PSX support

See documentation at:



http://www.dim.com/~mackys/psxmemcard/ps-eng2.txt





http://www.geocities.co.jp/Playtown/2004/psx/ps_eng.txt
http://www.gamesx.com/controldata/psxcont/psxcont.htm





ftp://milano.usal.es/pablo/


*/

diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c
index 2b0eba6..b09c7d1 100644
--- a/drivers/input/misc/cm109.c
+++ b/drivers/input/misc/cm109.c
@@ -259,7 +259,7 @@ static unsigned short keymap_usbph01(int scancode)
/*

Keymap for ATCom AU-100



http://www.atcom.cn/En_products_AU100.html





http://www.atcom.cn/products.html
http://www.packetizer.com/products/au100/
http://www.voip-info.org/wiki/view/AU-100




diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index c714ca2..bf5fd7f 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -30,6 +30,7 @@ config MOUSE_PS2
   	http://w1.894.telia.com/~u89404340/touchpad/index.html
     and a new version of GPM at:
   	http://www.geocities.com/dt_or/gpm/gpm.html

<http://xorg.freedesktop.org/archive/individual/driver/>

to take advantage of the advanced features of the touchpad.
If unsure, say Y.


diff --git a/drivers/input/mouse/touchkit_ps2.c b/drivers/input/mouse/touchkit_ps2.c
index 88121c5..1fd8f5e 100644
--- a/drivers/input/mouse/touchkit_ps2.c
+++ b/drivers/input/mouse/touchkit_ps2.c
@@ -21,8 +21,8 @@


Based upon touchkitusb.c




Vendor documentation is available in support section of:



http://www.egalax.com.tw/





Vendor documentation is available at:



http://home.eeti.com.tw/web20/drivers/Software%20Programming%20Guide_v2.0.pd...

*/

#include <linux/kernel.h>
diff --git a/drivers/input/touchscreen/mk712.c b/drivers/input/touchscreen/mk712.c
index efd3aeb..36e57de 100644
--- a/drivers/input/touchscreen/mk712.c
+++ b/drivers/input/touchscreen/mk712.c
@@ -17,7 +17,7 @@

found in Gateway AOL Connected Touchpad computers.

Documentation for ICS MK712 can be found at:



http://www.icst.com/pdf/mk712.pdf





http://www.idt.com/products/getDoc.cfm?docID=18713923

*/

/*
diff --git a/drivers/isdn/i4l/isdn_audio.c b/drivers/isdn/i4l/isdn_audio.c
index 861bdf3..d501393 100644
--- a/drivers/isdn/i4l/isdn_audio.c
+++ b/drivers/isdn/i4l/isdn_audio.c
@@ -439,7 +439,7 @@ isdn_audio_xlaw2adpcm(adpcm_state * s, int fmt, unsigned char *in,
/*

Goertzel algorithm.



See http://ptolemy.eecs.berkeley.edu/~pino/Ptolemy/papers/96/dtmf_ict/





See http://ptolemy.eecs.berkeley.edu/papers/96/dtmf_ict/
for more info.
Result is stored into an sk_buff and queued up for later
evaluation.



diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index d0d2213..9e3e2c5 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -3,9 +3,9 @@


Copyright (C) 2003, 2004 Colin Leroy, Rasmus Rohde, Benjamin Herrenschmidt




Documentation from



http://www.analog.com/UploadedFiles/Data_Sheets/115254175ADT7467_pra.pdf



http://www.analog.com/UploadedFiles/Data_Sheets/3686221171167ADT7460_b.pdf





Documentation from 115254175ADT7467_pra.pdf and 3686221171167ADT7460_b.pdf



http://www.onsemi.com/PowerSolutions/product.do?id=ADT7467



http://www.onsemi.com/PowerSolutions/product.do?id=ADT7460


*/

diff --git a/drivers/media/IR/keymaps/rc-manli.c b/drivers/media/IR/keymaps/rc-manli.c
index 1e9fbfa..0f590b3 100644
--- a/drivers/media/IR/keymaps/rc-manli.c
+++ b/drivers/media/IR/keymaps/rc-manli.c
@@ -13,7 +13,6 @@
 #include <media/rc-map.h>
/* Michael Tokarev mjt@tls.msk.ru

http://www.corpit.ru/mjt/beholdTV/remote_control.jpg
keytable is used by MANLI MTV00[0x0c] and BeholdTV 40[13] at
least, and probably other cards too.
The "ascii-art picture" below (in comments, first row

diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index a6be529..87279d9 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -26,7 +26,7 @@

Or, point your browser to http://www.gnu.org/copyleft/gpl.html





the project's page is at http://www.linuxtv.org/dvb/





the project's page is at http://www.linuxtv.org/

*/

@@ -2290,13 +2290,7 @@ static int frontend_init(struct av7110 *av7110)
 /* Budgetpatch note:

Original hardware design by Roberto Deza:
There is a DVB_Wiki at



http://212.227.36.83/linuxtv/wiki/index.php/Main_Page



where is described this 'DVB TT Budget Patch', on Card Modding:



http://212.227.36.83/linuxtv/wiki/index.php/DVB_TT_Budget_Patch



On the short description there is also a link to a external file,



with more details:



http://perso.wanadoo.es/jesussolano/Ttf_tsc1.zip









http://www.linuxtv.org/
New software triggering design by Emard that works on
original Roberto Deza's hardware:




diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c
index 13efba9..878da6a 100644
--- a/drivers/media/dvb/ttpci/av7110_av.c
+++ b/drivers/media/dvb/ttpci/av7110_av.c
@@ -25,7 +25,7 @@

Or, point your browser to http://www.gnu.org/copyleft/gpl.html





the project's page is at http://www.linuxtv.org/dvb/





the project's page is at http://www.linuxtv.org/

*/

#include <linux/types.h>
diff --git a/drivers/media/dvb/ttpci/av7110_ca.c b/drivers/media/dvb/ttpci/av7110_ca.c
index 4eba35a..7564c26 100644
--- a/drivers/media/dvb/ttpci/av7110_ca.c
+++ b/drivers/media/dvb/ttpci/av7110_ca.c
@@ -25,7 +25,7 @@

Or, point your browser to http://www.gnu.org/copyleft/gpl.html





the project's page is at http://www.linuxtv.org/dvb/





the project's page is at http://www.linuxtv.org/

*/

#include <linux/kernel.h>
diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c
index e162691..f1cbfe5 100644
--- a/drivers/media/dvb/ttpci/av7110_hw.c
+++ b/drivers/media/dvb/ttpci/av7110_hw.c
@@ -22,7 +22,7 @@

Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
Or, point your browser to http://www.gnu.org/copyleft/gpl.html




the project's page is at http://www.linuxtv.org/dvb/





the project's page is at http://www.linuxtv.org/

*/

/* for debugging ARM communication: */
diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c
index 8986d96..ac20c5b 100644
--- a/drivers/media/dvb/ttpci/av7110_v4l.c
+++ b/drivers/media/dvb/ttpci/av7110_v4l.c
@@ -22,7 +22,7 @@

Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
Or, point your browser to http://www.gnu.org/copyleft/gpl.html




the project's page is at http://www.linuxtv.org/dvb/





the project's page is at http://www.linuxtv.org/

*/

#include <linux/kernel.h>
diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
index 983672a..97afc01 100644
--- a/drivers/media/dvb/ttpci/budget-av.c
+++ b/drivers/media/dvb/ttpci/budget-av.c
@@ -30,7 +30,7 @@

Or, point your browser to http://www.gnu.org/copyleft/gpl.html





the project's page is at http://www.linuxtv.org/dvb/





the project's page is at http://www.linuxtv.org/

*/

#include "budget.h"
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 13ac9e3..a9c2c32 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -26,7 +26,7 @@

Or, point your browser to http://www.gnu.org/copyleft/gpl.html





the project's page is at http://www.linuxtv.org/dvb/





the project's page is at http://www.linuxtv.org/

*/

#include <linux/module.h>
diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/ttpci/budget-core.c
index ba18e56..0546613 100644
--- a/drivers/media/dvb/ttpci/budget-core.c
+++ b/drivers/media/dvb/ttpci/budget-core.c
@@ -31,7 +31,7 @@

Or, point your browser to http://www.gnu.org/copyleft/gpl.html





the project's page is at http://www.linuxtv.org/dvb/





the project's page is at http://www.linuxtv.org/

*/

diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
index 9c92f9d..5798355 100644
--- a/drivers/media/dvb/ttpci/budget-patch.c
+++ b/drivers/media/dvb/ttpci/budget-patch.c
@@ -27,7 +27,7 @@

Or, point your browser to http://www.gnu.org/copyleft/gpl.html





the project's page is at http://www.linuxtv.org/dvb/





the project's page is at http://www.linuxtv.org/

*/

#include "av7110.h"
diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c
index 874a10a..d238fb9 100644
--- a/drivers/media/dvb/ttpci/budget.c
+++ b/drivers/media/dvb/ttpci/budget.c
@@ -31,7 +31,7 @@

Or, point your browser to http://www.gnu.org/copyleft/gpl.html





the project's page is at http://www.linuxtv.org/dvb/





the project's page is at http://www.linuxtv.org/

*/

#include "budget.h"
diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c
index 4349213..255d40d 100644
--- a/drivers/media/radio/radio-maxiradio.c
+++ b/drivers/media/radio/radio-maxiradio.c
@@ -13,7 +13,7 @@

anybody does please mail me.

For the pdf file see:



http://www.semiconductors.philips.com/pip/TEA5757H/V1





http://www.nxp.com/acrobat_download2/expired_datasheets/TEA5757_5759_3.pdf


CHANGES:



diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c
index 0343928..a5363ed 100644
--- a/drivers/media/radio/radio-typhoon.c
+++ b/drivers/media/radio/radio-typhoon.c
@@ -1,8 +1,6 @@
 /* Typhoon Radio Card driver for radio support

(c) 1999 Dr. Henrik Seidel Henrik.Seidel@gmx.de




Card manufacturer:



http://194.18.155.92/idc/prod2.idc?nr=50753&lang=e

Notes on the hardware




diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index f6e4d04..d000522 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -978,7 +978,7 @@ config USB_STKWEBCAM
     Supported devices are typically found in some Asus laptops,
     with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
     may be supported by the stk11xx driver, from which this is

 derived, see http://stk11xx.sourceforge.net




 derived, see <http://sourceforge.net/projects/syntekdriver/> 


To compile this driver as a module, choose M here: the
   module will be called stkwebcam.


diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index be35e69..9536f1a 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -4,7 +4,7 @@

sensor.

The data sheet for this device can be found at:



http://www.marvell.com/products/pcconn/88ALP01.jsp





http://www.marvell.com/products/pc_connectivity/88alp01/

Copyright 2006 One Laptop Per Child Association, Inc.
Copyright 2006-7 Jonathan Corbet corbet@lwn.net



diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index 6b805af..fe10909 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -39,7 +39,7 @@ static struct cx18_card_tuner_i2c cx18_i2c_std = {
   .tv    = { 0x61, 0x60, I2C_CLIENT_END },
 };
-/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii
+/* Please add new PCI IDs to: http://pci-ids.ucw.cz/ 
    This keeps the PCI ID database up to date. Note that the entries
    must be added under vendor 0x4444 (Conexant) as subsystem IDs.
    New vendor IDs should still be added to the vendor ID list. */
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
index abd64e8..53a6782 100644
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@@ -7,7 +7,7 @@

(c) 2008 Steven Toth stoth@linuxtv.org
 - CX23885/7/8 support






Includes parts from the ivtv driver( http://ivtv.sourceforge.net/),





Includes parts from the ivtv driver http://sourceforge.net/projects/ivtv/

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by



diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index e46e1ce..660b2a9 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -9,7 +9,7 @@

(c) 2005-2006 Mauro Carvalho Chehab mchehab@infradead.org
   - video_ioctl2 conversion






Includes parts from the ivtv driver( http://ivtv.sourceforge.net/),





Includes parts from the ivtv driver http://sourceforge.net/projects/ivtv/

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by



diff --git a/drivers/media/video/ivtv/ivtv-cards.c b/drivers/media/video/ivtv/ivtv-cards.c
index ca1fd32..87afbbe 100644
--- a/drivers/media/video/ivtv/ivtv-cards.c
+++ b/drivers/media/video/ivtv/ivtv-cards.c
@@ -65,7 +65,7 @@ static struct ivtv_card_tuner_i2c ivtv_i2c_tda8290 = {
/********************** card configuration *******************************/
-/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii
+/* Please add new PCI IDs to: http://pci-ids.ucw.cz/ 
    This keeps the PCI ID database up to date. Note that the entries
    must be added under vendor 0x4444 (Conexant) as subsystem IDs.
    New vendor IDs should still be added to the vendor ID list. */
diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c
index ef0c817..b1dbcf1 100644
--- a/drivers/media/video/mxb.c
+++ b/drivers/media/video/mxb.c
@@ -3,7 +3,7 @@
 Copyright (C) 1998-2006 Michael Hunold <michael@mihu.de>



Visit http://www.mihu.de/linux/saa7146/mxb/


Visit http://www.themm.net/~mihu/linux/saa7146/mxb.html 
for further details about this card.
This program is free software; you can redistribute it and/or modify


diff --git a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
index 2782f94..2e86fdc 100644
--- a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
+++ b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
@@ -4,7 +4,6 @@

                                                                    *


Copyright (C) 2004 by Carlos Eduardo Medaglia Dyonisio                  *
                  <medaglia@undl.org.br>                            *





                  http://cadu.homelinux.com:8080/                   *


                                                                    *


Support for SN9C103, DAC Magnitude, exposure and green gain controls    *
added by Luca Risolia luca.risolia@studio.unibo.it                    *



diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index b743312..3b28933 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -112,8 +112,8 @@ config IBM_ASM
 WARNING: This software may not be supported or function
 correctly on your IBM server. Please consult the IBM ServerProven


 website <http://www.pc.ibm.com/ww/eserver/xseries/serverproven> for


 information on the specific driver level and support statement




 website <http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/>


 for information on the specific driver level and support statement

for your IBM server.

config PHANTOM
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 3e6c47b..ba29d2f 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -418,8 +418,8 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
	/*
	 * Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3, 1.4


	 * see: http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf, page 19


	 *      http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_100_20011201.pdf




	 * see: http://cs.ozerki.net/zap/pub/axim-x5/docs/cfi_r20.pdf, page 19 


	 *      http://www.spansion.com/Support/AppNotes/cfi_100_20011201.pdf
 *      http://www.spansion.com/Support/Datasheets/s29ws-p_00_a12_e.pdf
 */
if (extp->MajorVersion != '1' ||



diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
index f4359fe..caf6041 100644
--- a/drivers/mtd/devices/lart.c
+++ b/drivers/mtd/devices/lart.c
@@ -17,7 +17,7 @@

      - January 2000



[2] MTD internal API documentation



      - http://www.linux-mtd.infradead.org/tech/







      - http://www.linux-mtd.infradead.org/ 



Limitations:




diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c
index 4d6a64c..037b399 100644
--- a/drivers/mtd/ftl.c
+++ b/drivers/mtd/ftl.c
@@ -51,7 +51,7 @@
 Use of the FTL format for non-PCMCIA applications may be an
 infringement of these patents.  For additional information,


contact M-Systems (http://www.m-sys.com) directly.


contact M-Systems directly. M-Systems since acquired by Sandisk.

======================================================================*/
 #include <linux/mtd/blktrans.h>
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 701d942..9622126 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -172,7 +172,7 @@ config MTD_OCTAGON
     This provides a 'mapping' driver which supports the way in which
     the flash chips are connected in the Octagon-5066 Single Board
     Computer. More information on the board is available at

 <http://www.octagonsystems.com/CPUpages/5066.html>.




 <http://www.octagonsystems.com/products/5066.aspx>.




config MTD_VMAX
   tristate "JEDEC Flash device mapped on Tempustech VMAX SBC301"
@@ -284,7 +284,7 @@ config MTD_TQM8XXL
     chips, currently uses AMD one. This 'mapping' driver supports
     that arrangement, allowing the CFI probe and command set driver
     code to communicate with the chips on the TQM8xxL board. More at

 <http://www.denx.de/embedded-ppc-en.html>.




 <http://www.denx.de/wiki/PPCEmbedded/>.




config MTD_RPXLITE
   tristate "CFI Flash device mapped on RPX Lite or CLLF"
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index db1dfc5..e06c898 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -2,7 +2,7 @@

Driver for One Laptop Per Child ‘CAFÉ’ controller, aka Marvell 88ALP01

The data sheet for this device can be found at:



http://www.marvell.com/products/pcconn/88ALP01.jsp





http://wiki.laptop.org/go/Datasheets

Copyright © 2006 Red Hat, Inc.
Copyright © 2006 David Woodhouse dwmw2@infradead.org



diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 2cc81a5..5b66842 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -921,7 +921,7 @@ config SMC91X
     including the SMC91C94 and the SMC91C111. Say Y if you want it
     compiled into the kernel, and read the file
     file:Documentation/networking/smc9.txt  and the Ethernet-HOWTO,

 available from  <http://www.linuxdoc.org/docs.html#howto>.




 available from  <http://www.tldp.org/docs.html#howto>.


This driver is also available as a module ( = code which can be
   inserted in and removed from the running kernel whenever you want).


@@ -1031,7 +1031,7 @@ config SMC911X
     including the new LAN9115, LAN9116, LAN9117, and LAN9118.
     Say Y if you want it compiled into the kernel, 
     and read the Ethernet-HOWTO, available from

 <http://www.linuxdoc.org/docs.html#howto>.




 <http://www.tldp.org/docs.html#howto>.


This driver is also available as a module. The module will be 
   called smc911x.  If you want to compile it as a module, say M


@@ -1513,7 +1513,7 @@ config E100
 For the latest Intel PRO/100 network driver for Linux, see:



 <http://appsr.intel.com/scripts-df/support_intel.asp>




 <http://www.intel.com/p/en_US/support/highlights/network/pro100plus>


More specific information on configuring the driver is in 
   file:Documentation/networking/e100.txt.


@@ -1539,9 +1539,8 @@ config FEALNX
   select CRC32
   select MII
   help

 Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet


 cards. Specifications and data at


 <http://www.myson.com.hk/mtd/datasheet/>.




 Say Y here to support the Myson MTD-800 family of PCI-based Ethernet 


 cards. <http://www.myson.com.tw/>




config NATSEMI
   tristate "National Semiconductor DP8381x series PCI Ethernet support"
@@ -1715,7 +1714,7 @@ config SMSC9420
     This is a driver for SMSC's LAN9420 PCI ethernet adapter.
     Say Y if you want it compiled into the kernel,
     and read the Ethernet-HOWTO, available from

 <http://www.linuxdoc.org/docs.html#howto>.




 <http://www.tldp.org/docs.html#howto>.


This driver is also available as a module. The module will be
   called smsc9420.  If you want to compile it as a module, say M


@@ -2550,7 +2549,7 @@ config CHELSIO_T1
           our website at http://www.chelsio.com.
       For customer support, please visit our customer support page at


     <http://www.chelsio.com/support.htm>.




     <http://www.chelsio.com/support.html>.

     Please send feedback to <linux-bugs@chelsio.com>.




@@ -2582,7 +2581,7 @@ config CHELSIO_T3
     our website at http://www.chelsio.com.
 For customer support, please visit our customer support page at


 <http://www.chelsio.com/support.htm>.




 <http://www.chelsio.com/support.html>.


Please send feedback to linux-bugs@chelsio.com.


@@ -2607,7 +2606,7 @@ config CHELSIO_T4
     our website at http://www.chelsio.com.
 For customer support, please visit our customer support page at


 <http://www.chelsio.com/support.htm>.




 <http://www.chelsio.com/support.html>.


Please send feedback to linux-bugs@chelsio.com.


@@ -2630,7 +2629,7 @@ config CHELSIO_T4VF
     our website at http://www.chelsio.com.
 For customer support, please visit our customer support page at


 <http://www.chelsio.com/support.htm>.




 <http://www.chelsio.com/support.html>.


Please send feedback to linux-bugs@chelsio.com.


diff --git a/drivers/net/appletalk/Kconfig b/drivers/net/appletalk/Kconfig
index 0a0e0cd..f5a8916 100644
--- a/drivers/net/appletalk/Kconfig
+++ b/drivers/net/appletalk/Kconfig
@@ -18,7 +18,7 @@ config ATALK
 General information about how to connect Linux, Windows machines and
 Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.  The


 NET-3-HOWTO, available from




 NET3-4-HOWTO, available from

http://www.tldp.org/docs.html#howto, contains valuable
   information as well.

diff --git a/drivers/net/atp.c b/drivers/net/atp.c
index bd2f9d3..0eee044 100644
--- a/drivers/net/atp.c
+++ b/drivers/net/atp.c
@@ -68,7 +68,7 @@ static int xcvr[NUM_UNITS]; 			/* The data transfer mode. */
In 1997 Realtek made available the documentation for the second generation
   RTL8012 chip, which has lead to several driver improvements.

 http://www.realtek.com.tw/cn/cn.html




 http://www.realtek.com.tw/

		Theory of Operation




diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
index 57c8ac0..c6e2571 100644
--- a/drivers/net/epic100.c
+++ b/drivers/net/epic100.c
@@ -131,8 +131,8 @@ IIIa. Ring buffers
IVb. References
-http://www.smsc.com/main/tools/discontinued/83c171.pdf
-http://www.smsc.com/main/tools/discontinued/83c175.pdf
+http://www.smsc.com/media/Downloads_Public/discontinued/83c171.pdf
+http://www.smsc.com/media/Downloads_Public/discontinued/83c175.pdf
 http://scyld.com/expert/NWay.html
 http://www.national.com/pf/DP/DP83840A.html
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
index 62d5d5c..95dbcfd 100644
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -73,7 +73,7 @@ config DMASCC
     certain parameters, such as channel access timing, clock mode, and
     DMA channel. This is accomplished with a small utility program,
     dmascc_cfg, available at

 <http://cacofonix.nt.tuwien.ac.at/~oe1kib/Linux/>. Please be sure to




 <http://www.linux-ax25.org/wiki/Ax25-tools>. Please be sure to

get at least version 1.27 of dmascc_cfg, as older versions will not
   work with the current driver.

diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c
index 294ccfb..8de3273 100644
--- a/drivers/net/ibmlana.c
+++ b/drivers/net/ibmlana.c
@@ -23,7 +23,7 @@ paper sources:
   'LAN Technical Reference Ethernet Adapter Interface Version 1 Release 1.0
    Document Number SC30-3661-00' by IBM for info on the adapter itself

Also see http://www.natsemi.com/


Also see http://www.national.com/analog

special acknowledgements to:

Bob Eager for helping me out with documentation from IBM

diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h
index 36c3060..4dc39e5 100644
--- a/drivers/net/irda/donauboe.h
+++ b/drivers/net/irda/donauboe.h
@@ -54,7 +54,7 @@
 /* anyone who has. HOWEVER the chip bears a striking resemblence */
 /* to the IrDA controller in the Toshiba RISC TMPR3922 chip      */
 /* the documentation for this is freely available at             */
-/* http://www.toshiba.com/taec/components/Generic/TMPR3922.shtml */
+/* http://www.madingley.org/james/resources/toshoboe/TMPR3922.pdf */
 /* The mapping between the registers in that document and the    */
 /* Registers in the 701 oboe chip are as follows    */
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index 56f3fc4..627b619 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -78,7 +78,7 @@ that almost all frames will need to be copied to an alignment buffer.
IVb. References
-http://www.realtek.com.tw/cn/cn.html
+http://www.realtek.com.tw/
 http://www.scyld.com/expert/NWay.html
IVc. Errata
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index c683f77..e092679 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -62,7 +62,7 @@ invalid ramWidth is Very Bad.
 V. References
http://www.scyld.com/expert/NWay.html
-http://www.national.com/pf/DP/DP83840.html
+http://www.national.com/opf/DP/DP83840A.html
Thanks to Terry Murphy of 3Com for providing development information for
 earlier 3Com products.
diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
index 8c4067a..12fb560 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@@ -15,7 +15,7 @@

Rewritten for 2.6 by Cesar Eduardo Barros

A datasheet for this chip can be found at



http://www.silan.com.cn/english/products/pdf/SC92031AY.pdf





http://www.silan.com.cn/english/product/pdf/SC92031AY.pdf

*/

/* Note about set_mac_address: I don't know how to change the hardware
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index ccee3ed..ef000b2 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -78,7 +78,7 @@

	     - Updated tlan.txt accordingly.


	     - Adjusted minimum/maximum frame length.


	     - There is now a TLAN website up at





	       http://tlan.kernel.dk







	       http://hp.sourceforge.net/ 



v1.7 April 07, 2000  - Started to implement custom ioctls. Driver now
	       reports PHY information when used with Donald





diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
index 435ef7d..ccc16d6 100644
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c
@@ -5,7 +5,7 @@

Originally sktr.c: Written 1997 by Christoph Goos

A fine result of the Linux Systems Network Architecture Project.



http://www.linux-sna.org





http://www.vanheusden.com/sna/

This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.



diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig
index 516713f..14c02e1 100644
--- a/drivers/net/tulip/Kconfig
+++ b/drivers/net/tulip/Kconfig
@@ -151,7 +151,7 @@ config ULI526X
   select CRC32
   ---help---
     This driver is for ULi M5261/M5263 10/100M Ethernet Controller

 (<http://www.uli.com.tw/>).




 (<http://www.nvidia.com/page/uli_drivers.html>).


To compile this driver as a module, choose M here. The module will
   be called uli526x.


diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c
index 08555f8..08ad269 100644
--- a/drivers/net/usb/plusb.c
+++ b/drivers/net/usb/plusb.c
@@ -32,7 +32,7 @@
/*


Prolific PL-2301/PL-2302 driver ... http://www.prolifictech.com





Prolific PL-2301/PL-2302 driver ... http://www.prolific.com.tw/

The protocol and handshaking used here should be bug-compatible
with the Linux 2.2 "plusb" driver, by Deti Fliegl.



diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index d08ce6a..423eb26 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -409,7 +409,7 @@ config CYCLADES_SYNC
   tristate "Cyclom 2X(tm) cards (EXPERIMENTAL)"
   depends on WAN_ROUTER_DRIVERS && (PCI || ISA)
   ---help---

 Cyclom 2X from Cyclades Corporation <http://www.cyclades.com/> is an




 Cyclom 2X from Cyclades Corporation <http://www.avocent.com/> is an

intelligent multiprotocol WAN adapter with data transfer rates up to
   512 Kbps. These cards support the X.25 and SNA related protocols.

diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index ea6362a..97659a0 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -351,7 +351,7 @@ struct ath5k_srev_name {
 /*

Some of this information is based on Documentation from:




http://madwifi.org/wiki/ChipsetFeatures/SuperAG





http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG

Modulation for Atheros' eXtended Range - range enhancing extension that is
supposed to double the distance an Atheros client device can keep a



diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index 55b4ac6..69a9b34 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -26,7 +26,6 @@

Atheros presentations and papers like these:

5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf



   http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf



5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf




diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig
index b0342a5..8e82379 100644
--- a/drivers/net/wireless/p54/Kconfig
+++ b/drivers/net/wireless/p54/Kconfig
@@ -8,7 +8,7 @@ config P54_COMMON
     also need to be enabled in order to support any devices.
 These devices require softmac firmware which can be found at


 http://prism54.org/




 <http://wireless.kernel.org/en/users/Drivers/p54>


If you choose to build a module, it'll be called p54common.


@@ -20,7 +20,7 @@ config P54_USB
     This driver is for USB isl38xx based wireless cards.
 These devices require softmac firmware which can be found at


 http://prism54.org/




 <http://wireless.kernel.org/en/users/Drivers/p54>


If you choose to build a module, it'll be called p54usb.


@@ -34,7 +34,7 @@ config P54_PCI
     supported by the fullmac driver/firmware.
 This driver requires softmac firmware which can be found at


 http://prism54.org/




 <http://wireless.kernel.org/en/users/Drivers/p54>


If you choose to build a module, it'll be called p54pci.


diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c
index dc14420..b5e64d7 100644
--- a/drivers/net/wireless/prism54/islpci_hotplug.c
+++ b/drivers/net/wireless/prism54/islpci_hotplug.c
@@ -38,7 +38,7 @@ module_param(init_pcitm, int, 0);
 /* In this order: vendor, device, subvendor, subdevice, class, class_mask,

driver_data
If you have an update for this please contact prism54-devel@prism54.org



The latest list can be found at http://prism54.org/supported_cards.php */





The latest list can be found at http://wireless.kernel.org/en/users/Drivers/p54 */



static DEFINE_PCI_DEVICE_TABLE(prism54_id_tbl) = {
   /* Intersil PRISM Duette/Prism GT Wireless LAN adapter */
   {
diff --git a/drivers/parisc/README.dino b/drivers/parisc/README.dino
index 097324f..1627426 100644
--- a/drivers/parisc/README.dino
+++ b/drivers/parisc/README.dino
@@ -10,8 +10,7 @@
 ** PCI bus. HP-supplied graphics cards that utilize the PCI bus are
 ** not affected."
 **
-** REVISIT: "go/pci_defect" link below is stale.
-**	HP Internal can use http://hpfcdma.fc.hp.com:80/Dino/
+** http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?locale=en_US&p...
 **
 **	Product		First Good Serial Number
 **  C200/C240 (US)	US67350000
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 89ed181..dcc333f 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -206,6 +206,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 	PCI_DEVICE_ID_INTEL_82439TX, 	quir

VIA Apollo KT133 needs PCI latency patch
Made according to a windows driver based patch by George E. Breese
see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm



and http://www.georgebreese.com/net/software/#PCI
 Also see http://www.au-ja.org/review-kt133a-1-en.phtml for


 the info on which Mr Breese based his work.






@@ -996,7 +997,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA,	0x605,	quirk_transparent_bridge)
 /*

Common misconfiguration of the MediaGX/Geode PCI master that will
reduce PCI bandwidth from 70MB/s to 25MB/s.  See the GXM/GXLV/GX1



datasheets found at http://www.national.com/ds/GX for info on what





datasheets found at http://www.national.com/analog for info on what
these bits do.  christer@weinigel.se

*/

static void quirk_mediagx_master(struct pci_dev *dev)
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 414d9a6..91a7225 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -1073,7 +1073,7 @@ static void yenta_config_init(struct yenta_socket *socket)

invisible during PCI scans because of a misconfigured subordinate number
of the parent brige - some BIOSes seem to be too lazy to set it right.
Does the fixup carefully by checking how far it can go without conflicts.



See http://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information.





See http://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information.

*/

static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge)
 {
diff --git a/drivers/pnp/pnpbios/proc.c b/drivers/pnp/pnpbios/proc.c
index 2d8ac43..bc89f39 100644
--- a/drivers/pnp/pnpbios/proc.c
+++ b/drivers/pnp/pnpbios/proc.c
@@ -11,7 +11,6 @@


The .../escd file is utilized by the lsescd utility written by
Gunther Mayer.



http://home.t-online.de/home/gunther.mayer/lsescd



The .../legacy_device_resources file is not used yet.




diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index bbf91ae..03453d4 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -116,7 +116,7 @@ config CHR_DEV_OSST
     http://www.tldp.org/docs.html#howto  and
     file:Documentation/scsi/osst.txt  in the kernel source.
     More info on the OnStream driver may be found on

 <http://linux1.onstream.nl/test/>




 <http://sourceforge.net/projects/osst/>

Please also have a look at the standard st docu, as most of it
   applies to osst as well.

@@ -156,9 +156,9 @@ config CHR_DEV_SG
     directly, so you need some additional software which knows how to
     talk to these devices using the SCSI protocol:

 For scanners, look at SANE (<http://www.mostang.com/sane/>). For CD




 For scanners, look at SANE (<http://www.sane-project.org/>). For CD

writer software look at Cdrtools


 (<http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html>)




 (<http://cdrecord.berlios.de/private/cdrecord.html>)

and for burning a "disk at once": CDRDAO
   (http://cdrdao.sourceforge.net/). Cdparanoia is a high
   quality digital reader of audio CDs (http://www.xiph.org/paranoia/).

@@ -950,6 +950,7 @@ config SCSI_IPS
   ---help---
     This is support for the IBM ServeRAID hardware RAID controllers.
     See http://www.developer.ibm.com/welcome/netfinity/serveraid.html

 and <http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=SERV-RAID>

for more information.  If this driver does not work correctly
   without modification please contact the author by email at
   ipslinux@adaptec.com.

@@ -1609,7 +1610,7 @@ config SCSI_DEBUG
     host adapter with one dummy SCSI disk. Each dummy disk uses kernel
     RAM as storage (i.e. it is a ramdisk). To save space when multiple
     dummy disks are simulated, they share the same kernel RAM for

 their storage. See <http://www.torque.net/sg/sdebug.html> for more




 their storage. See <http://sg.danny.cz/sg/sdebug26.html> for more

information. This driver is primarily of use to those testing the
   SCSI and block subsystems. If unsure, say N.

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 24110f6..131c95f 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -924,7 +924,7 @@ static int broken_efr(struct uart_8250_port *up)
   /*
    * Exar ST16C2550 "A2" devices incorrectly detect as
    * having an EFR, and report an ID of 0x0201.  See

* http://www.exar.com/info.php?pdf=dan180_oct2004.pdf




* http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html 

*/
 if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16)
  return 1;

diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index 5318dd3..feb62a8 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -10,7 +10,7 @@
/*

This driver and the hardware supported are in term of EE-191 of ADI.



http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf





http://www.analog.com/static/imported-files/application_notes/EE191.pdf
This application note describe how to implement a UART on a Sharc DSP,
but this driver is implemented on Blackfin Processor.
Transmit Frame Sync is not used by this driver to transfer data out.



diff --git a/drivers/serial/bfin_sport_uart.h b/drivers/serial/bfin_sport_uart.h
index 9ce253e..6d06ce1 100644
--- a/drivers/serial/bfin_sport_uart.h
+++ b/drivers/serial/bfin_sport_uart.h
@@ -10,7 +10,7 @@
/*

This driver and the hardware supported are in term of EE-191 of ADI.



http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf





http://www.analog.com/static/imported-files/application_notes/EE191.pdf
This application note describe how to implement a UART on a Sharc DSP,
but this driver is implemented on Blackfin Processor.
Transmit Frame Sync is not used by this driver to transfer data out.



diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index 9b03d7b..3fa2e16 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -44,7 +44,7 @@ MODULE_DEVICE_TABLE(of, ulite_of_match);

Register definitions

For register details see datasheet:



http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf





http://www.xilinx.com/support/documentation/ip_documentation/opb_uartlite.pd...

*/

#define ULITE_RX		0x00
diff --git a/drivers/staging/asus_oled/README b/drivers/staging/asus_oled/README
index 96b9717..0d82a6d 100644
--- a/drivers/staging/asus_oled/README
+++ b/drivers/staging/asus_oled/README
@@ -2,7 +2,7 @@
     Driver for Asus OLED display present in some Asus laptops.
 The code of this driver is based on 'asusoled' program taken from


https://launchpad.net/asusoled/. I just wanted to have a simple


http://lapsus.berlios.de/asus_oled.html. I just wanted to have a simple
kernel driver for controlling this device, but I didn't know how
to do that. Now I know ;) Also, that program can not be used
with usbhid loaded, which means no USB mouse/keyboard while

diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c
index 5b279fb..8c95d8c 100644
--- a/drivers/staging/asus_oled/asus_oled.c
+++ b/drivers/staging/asus_oled/asus_oled.c
@@ -24,7 +24,7 @@



Asus OLED support is based on asusoled program taken from



https://launchpad.net/asusoled/.





http://lapsus.berlios.de/asus_oled.html.



*/

diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c
index ced346a..78b1410 100644
--- a/drivers/staging/comedi/drivers/cb_pcimdas.c
+++ b/drivers/staging/comedi/drivers/cb_pcimdas.c
@@ -37,7 +37,7 @@ Configuration Options:
 Developed from cb_pcidas and skel by Richard Bytheway (mocelet@sucs.org).
 Only supports DIO, AO and simple AI in it's present form.
 No interrupts, multi channel or FIFO AI, although the card looks like it could support this.
-See http://www.measurementcomputing.com/PDFManuals/pcim-das1602_16.pdf for more details.
+See http://www.mccdaq.com/PDFs/Manuals/pcim-das1602-16.pdf for more details.
 */
#include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c
index 6af6c83..82be77d 100644
--- a/drivers/staging/comedi/drivers/daqboard2000.c
+++ b/drivers/staging/comedi/drivers/daqboard2000.c
@@ -50,8 +50,8 @@ Configuration options:
    With some help from our swedish distributor, we got the Windows sourcecode
    for the card, and here are the findings so far.


A good document that describes the PCI interface chip is found at:


 http://plx.plxtech.com/download/9080/databook/9080db-106.pdf





A good document that describes the PCI interface chip is 9080db-106.pdf


 available from http://www.plxtech.com/products/io/pci9080 



The initialization done so far is:
  a. program the FPGA (windows code sans a lot of error messages)



diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 3acf7e6..1411dd8 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -37,7 +37,7 @@ boards has not
 yet been added to the driver, mainly due to the fact that
 I don't know the device id numbers.  If you have one
 of these boards,
-please file a bug report at https://bugs.comedi.org/
+please file a bug report at http://comedi.org/ 
 so I can get the necessary information from you.
The 1200 series boards have onboard calibration dacs for correcting
diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
index bd16f91..986ef67 100644
--- a/drivers/staging/comedi/drivers/ni_mio_common.c
+++ b/drivers/staging/comedi/drivers/ni_mio_common.c
@@ -34,7 +34,7 @@
      340747b.pdf  AT-MIO E series Register Level Programmer Manual
      341079b.pdf  PCI E Series RLPM
      340934b.pdf  DAQ-STC reference manual

67xx and 611x registers (from http://www.ni.com/pdf/daq/us)


67xx and 611x registers (from ftp://ftp.ni.com/support/daq/mhddk/documentation/)
release_ni611x.pdf
release_ni67xx.pdf
Other possibly relevant info:

diff --git a/drivers/staging/comedi/drivers/plx9080.h b/drivers/staging/comedi/drivers/plx9080.h
index 485d63f..0d254a1 100644
--- a/drivers/staging/comedi/drivers/plx9080.h
+++ b/drivers/staging/comedi/drivers/plx9080.h
@@ -13,7 +13,7 @@









Copyright (C) 1999 RG Studio s.c., http://www.rgstudio.com.pl/





Copyright (C) 1999 RG Studio s.c.
Written by Krzysztof Halasa khc@rgstudio.com.pl

Portions (C) SBE Inc., used by permission.



diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index 0367d2b..a49a7c5 100644
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -59,7 +59,7 @@ Configuration options:
     Data sheet: http://www.rtdusa.com/pdf/dm7520.pdf
     Example source: http://www.rtdusa.com/examples/dm/dm7520.zip
     Call them and ask for the register level manual.

PCI chip: http://www.plxtech.com/products/toolbox/9080.htm


PCI chip: http://www.plxtech.com/products/io/pci9080
Notes:
This board is memory mapped.  There is some IO stuff, but it isn't needed.


diff --git a/drivers/staging/quickstart/quickstart.c b/drivers/staging/quickstart/quickstart.c
index 6612247..ba8f670 100644
--- a/drivers/staging/quickstart/quickstart.c
+++ b/drivers/staging/quickstart/quickstart.c
@@ -5,8 +5,7 @@

Copyright (C) 2007-2010 Angelo Arrifano miknix@gmail.com

Information gathered from disassebled dsdt and from here:



"http://download.microsoft.com/download/9/c/5/



9c5b2167-8017-4bae-9fde-d599bac8184a/DirAppLaunch_Vista.doc"





http://www.microsoft.com/whdc/system/platform/firmware/DirAppLaunch.mspx

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by



diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
index 1da73ec..bb44079 100644
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -17,9 +17,9 @@ config UIO_CIF
   depends on PCI
   help
     Driver for Hilscher CIF DeviceNet and Profibus cards.  This

 driver requires a userspace component that handles all of the


 heavy lifting and can be found at:


 	http://www.osadl.org/projects/downloads/UIO/user/cif-*




 driver requires a userspace component called cif that handles


 all of the heavy lifting and can be found at:


       <http://www.osadl.org/projects/downloads/UIO/user/>


To compile this driver as a module, choose M here: the module
   will be called uio_cif.


diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 916b2b6..b71e309 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -176,7 +176,7 @@ config USB_SERIAL_VISOR
   help
     Say Y here if you want to connect to your HandSpring Visor, Palm
     m500 or m505 through its USB docking station. See

 <http://usbvisor.sourceforge.net/> for more information on using this




 <http://usbvisor.sourceforge.net/index.php3> for more information on using this

driver.
To compile this driver as a module, choose M here: the


@@ -289,7 +289,7 @@ config USB_SERIAL_KEYSPAN
     and was developed with their support.  You must also include
     firmware to support your particular device(s).

 See <http://misc.nu/hugh/keyspan.html> for more information.




 See <http://blemings.org/hugh/keyspan.html> for more information.


To compile this driver as a module, choose M here: the
   module will be called keyspan.


diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 15a4583..28c640d 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -46,7 +46,7 @@
 #define FTDI_USINT_RS232_PID	0xb812	/* Navigator RS232 and CONFIG lines */
/* OOCDlink by Joern Kaipf joernk@web.de


(http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */





(http://www.joernonline.de/) */



#define FTDI_OOCDLINK_PID	0xbaf8	/* Amontec JTAGkey */
/* Luminary Micro Stellaris Boards, VID = FTDI_VID */
@@ -335,7 +335,7 @@
 #define FTDI_PIEGROUP_PID	0xF208	/* Product Id */
/* ACT Solutions HomePro ZWave interface

(http://www.act-solutions.com/HomePro.htm) */


(http://www.act-solutions.com/HomePro-Product-Matrix.html) */

#define FTDI_ACTZWAVE_PID	0xF2D0
/*
@@ -366,7 +366,7 @@
 #define FTDI_SUUNTO_SPORTS_PID	0xF680	/* Suunto Sports instrument */
/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
-/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
+/* http://www.usbuirt.com/ */
 #define FTDI_USB_UIRT_PID	0xF850	/* Product Id */
/* CCS Inc. ICDU/ICDU40 product ID -
@@ -395,7 +395,7 @@
  */
 #define FTDI_HE_TIRA1_PID	0xFA78	/* Tira-1 IR transceiver */
-/* Inside Accesso contactless reader (http://www.insidefr.com) */
+/* Inside Accesso contactless reader (http://www.insidecontactless.com/) */
 #define INSIDE_ACCESSO		0xFAD0
/*
@@ -634,14 +634,14 @@
/*

JETI SPECTROMETER SPECBOS 1201



http://www.jeti.com/products/sys/scb/scb1201.php





http://www.jeti.com/cms/index.php/instruments/other-instruments/specbos-2101

*/

#define JETI_VID		0x0c6c
 #define JETI_SPC1201_PID	0x04b2
/*

FTDI USB UART chips used in construction projects from the



Elektor Electronics magazine (http://elektor-electronics.co.uk)





Elektor Electronics magazine (http://www.elektor.com/)

*/

#define ELEKTOR_VID		0x0C7D
 #define ELEKTOR_FT323R_PID	0x0005	/* RFID-Reader, issue 09-2006 */
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 297163c..0791778 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -9,7 +9,7 @@
   the Free Software Foundation; either version 2 of the License, or
   (at your option) any later version.

See http://misc.nu/hugh/keyspan.html for more information.


See http://blemings.org/hugh/keyspan.html for more information.
Code in this driver inspired by and in a number of places taken
from Brian Warner's original Keyspan-PDA driver.


diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index bf3297d..2d8baf6 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -9,7 +9,7 @@
   the Free Software Foundation; either version 2 of the License, or
   (at your option) any later version.

See http://misc.nu/hugh/keyspan.html for more information.


See http://blemings.org/hugh/keyspan.html for more information.
Code in this driver inspired by and in a number of places taken
from Brian Warner's original Keyspan-PDA driver.


diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h
index 3a3f5e6..d325bb8 100644
--- a/drivers/usb/serial/mct_u232.h
+++ b/drivers/usb/serial/mct_u232.h
@@ -10,10 +10,9 @@


This driver is for the device MCT USB-RS232 Converter (25 pin, Model No.
U232-P25) from Magic Control Technology Corp. (there is also a 9 pin



Model No. U232-P9). See http://www.mct.com.tw/p_u232.html for further



information. The properties of this device are listed at the end of this



file. This device is available from various distributors. I know Hana,



http://www.hana.de and D-Link, http://www.dlink.com/products/usb/dsbs25.





Model No. U232-P9). See http://www.mct.com.tw/products/product_us232.html



for further information. The properties of this device are listed at the end



of this file. This device was used in the Dlink DSB-S25.

All of the information about the device was acquired by using SniffUSB
on Windows98. The technical details of the reverse engineering are



@@ -458,7 +457,7 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial,

embedded UART.  Exhaustive documentation for these is available at:

http://www.semiconductors.philips.com/pip/p87c52ubaa



http://www.semiconductors.philips.com/pip/pdiusbd12





http://www.nxp.com/acrobat_download/various/PDIUSBD12_PROGRAMMING_GUIDE.pdf

Thanks to Julian Highfield for the pointer to the Philips database.




diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 8a372ba..b356e15 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -36,7 +36,7 @@ config USB_STORAGE_DATAFAB
   depends on USB_STORAGE
   help
     Support for certain Datafab CompactFlash readers.

 Datafab has a web page at <http://www.datafabusa.com/>.




 Datafab has a web page at <http://www.datafab.com/>.


If this driver is compiled as a module, it will be named ums-datafab.


diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 8b31fdf..dc06ff1 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -49,7 +49,7 @@ menuconfig FB
     You need an utility program called fbset to make full use of frame
     buffer devices. Please read file:Documentation/fb/framebuffer.txt
     and the Framebuffer-HOWTO at

 <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html> for more




 <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more

information.
Say Y here and to the driver for your graphics board below if you


@@ -955,7 +955,7 @@ config FB_EPSON1355
     Build in support for the SED1355 Epson Research Embedded RAMDAC
     LCD/CRT Controller (since redesignated as the S1D13505) as a
     framebuffer.  Product specs at

 <http://www.erd.epson.com/vdc/html/products.htm>.




 <http://vdc.epson.com/>.




config FB_S1D13XXX
   tristate "Epson S1D13XXX framebuffer support"
@@ -966,7 +966,7 @@ config FB_S1D13XXX
   help
     Support for S1D13XXX framebuffer device family (currently only
     working with S1D13806). Product specs at

 <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>




 <http://vdc.epson.com/>




config FB_ATMEL
   tristate "AT91/AT32 LCD Controller support"
@@ -1323,7 +1323,7 @@ config FB_RADEON
     don't need to choose this to run the Radeon in plain VGA mode.
 There is a product page at


 http://apps.ati.com/ATIcompare/




 http://products.amd.com/en-us/GraphicCardResult.aspx




config FB_RADEON_I2C
   bool "DDC/I2C for ATI Radeon support"
@@ -1395,7 +1395,7 @@ config FB_ATY_CT
     Say Y here to support use of ATI's 64-bit Rage boards (or other
     boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
     framebuffer device.  The ATI product support page for these boards

 is at <http://support.ati.com/products/pc/mach64/>.




 is at <http://support.ati.com/products/pc/mach64/mach64.html>.




config FB_ATY_GENERIC_LCD
   bool "Mach64 generic LCD support (EXPERIMENTAL)"
diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c
index f3d7440..3ec4923 100644
--- a/drivers/video/arcfb.c
+++ b/drivers/video/arcfb.c
@@ -2,7 +2,6 @@

linux/drivers/video/arcfb.c -- FB driver for Arc monochrome LCD board

Copyright (C) 2005, Jaya Kumar jayalk@intworks.biz



http://www.intworks.biz/arclcd

This file is subject to the terms and conditions of the GNU General Public
License. See the file COPYING in the main directory of this archive for



diff --git a/drivers/video/epson1355fb.c b/drivers/video/epson1355fb.c
index db9713b..a268cbf 100644
--- a/drivers/video/epson1355fb.c
+++ b/drivers/video/epson1355fb.c
@@ -4,7 +4,7 @@

Epson Research S1D13505 Embedded RAMDAC LCD/CRT Controller
(previously known as SED1355)




Cf. http://www.erd.epson.com/vdc/html/S1D13505.html





Cf. http://vdc.epson.com/


Copyright (C) Hewlett-Packard Company.  All rights reserved.



diff --git a/drivers/video/fbcvt.c b/drivers/video/fbcvt.c
index 7293eac..7cb715d 100644
--- a/drivers/video/fbcvt.c
+++ b/drivers/video/fbcvt.c
@@ -5,7 +5,7 @@


 Based from the VESA(TM) Coordinated Video Timing Generator by


 Graham Loveridge April 9, 2003 available at





 http://www.vesa.org/public/CVT/CVTd6r1.xls







 http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls



This file is subject to the terms and conditions of the GNU General Public
License.  See the file COPYING in the main directory of this archive



diff --git a/drivers/video/hecubafb.c b/drivers/video/hecubafb.c
index c77bcc6..e225c00 100644
--- a/drivers/video/hecubafb.c
+++ b/drivers/video/hecubafb.c
@@ -10,7 +10,7 @@


Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
This work was possible because of apollo display code from E-Ink's website



http://support.eink.com/community





http://eink.com/
All information used to write this code is from public material made
available by E-Ink on its support site. Some commands such as 0xA4
were found by looping through cmd=0x00 thru 0xFF and supplying random



diff --git a/drivers/video/metronomefb.c b/drivers/video/metronomefb.c
index 9b3d6e4..63ed3b7 100644
--- a/drivers/video/metronomefb.c
+++ b/drivers/video/metronomefb.c
@@ -10,7 +10,7 @@

Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.

This work was made possible by help and equipment support from E-Ink



Corporation. http://support.eink.com/community





Corporation. http://www.eink.com/

This driver is written to be used with the Metronome display controller.
It is intended to be architecture independent. A board specific driver



diff --git a/firmware/keyspan_pda/keyspan_pda.S b/firmware/keyspan_pda/keyspan_pda.S
index 418fe69..f3acc19 100644
--- a/firmware/keyspan_pda/keyspan_pda.S
+++ b/firmware/keyspan_pda/keyspan_pda.S
@@ -74,7 +74,7 @@

recognizes the new device ID and glues it to the real serial driver code.

USEFUL DOCS:



EzUSB Technical Reference Manual: http://www.anchorchips.com





EzUSB Technical Reference Manual: http://www.cypress.com/
8051 manuals: everywhere, but try www.dalsemi.com because the EzUSB is
basically the Dallas enhanced 8051 code. Remember that the EzUSB IO ports
use totally different registers!



diff --git a/firmware/keyspan_pda/xircom_pgs.S b/firmware/keyspan_pda/xircom_pgs.S
index 05d99dd..0b79bbf 100644
--- a/firmware/keyspan_pda/xircom_pgs.S
+++ b/firmware/keyspan_pda/xircom_pgs.S
@@ -74,7 +74,7 @@

recognizes the new device ID and glues it to the real serial driver code.

USEFUL DOCS:



EzUSB Technical Reference Manual: http://www.anchorchips.com





EzUSB Technical Reference Manual: http://www.cypress.com/
8051 manuals: everywhere, but try www.dalsemi.com because the EzUSB is
basically the Dallas enhanced 8051 code. Remember that the EzUSB IO ports
use totally different registers!



diff --git a/fs/hostfs/hostfs.h b/fs/hostfs/hostfs.h
index 6bbd75c..7c232c1 100644
--- a/fs/hostfs/hostfs.h
+++ b/fs/hostfs/hostfs.h
@@ -28,12 +28,7 @@

#define ATTR_KILL_SUID	2048
#define ATTR_KILL_SGID	4096




and this is because they were added in 2.5 development in this patch:







http://linux.bkbits.net:8080/linux-2.5/



cset@3caf4a12k4XgDzK7wyK-TGpSZ9u2Ww?nav=index.html



|src/.|src/include|src/include/linux|related/include/linux/fs.h









and this is because they were added in 2.5 development.
Actually, they are not needed by most ->setattr() methods - they are set by
callers of notify_change() to notify that the setuid/setgid bits must be
dropped.



diff --git a/fs/partitions/ldm.c b/fs/partitions/ldm.c
index 5bf8a04..789c625 100644
--- a/fs/partitions/ldm.c
+++ b/fs/partitions/ldm.c
@@ -5,7 +5,7 @@

Copyright (c) 2001-2007 Anton Altaparmakov
Copyright (C) 2001,2002 Jakob Kemi jakob.kemi@telia.com




Documentation is available at http://www.linux-ntfs.org/content/view/19/37/





Documentation is available at http://www.linux-ntfs.org/doku.php?id=downloads

This program is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free Software



diff --git a/fs/partitions/ldm.h b/fs/partitions/ldm.h
index d1fb50b..374242c 100644
--- a/fs/partitions/ldm.h
+++ b/fs/partitions/ldm.h
@@ -5,7 +5,7 @@

Copyright (c) 2001-2007 Anton Altaparmakov
Copyright (C) 2001,2002 Jakob Kemi jakob.kemi@telia.com




Documentation is available at http://www.linux-ntfs.org/content/view/19/37/





Documentation is available at http://www.linux-ntfs.org/doku.php?id=downloads

This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free



diff --git a/fs/reiserfs/Kconfig b/fs/reiserfs/Kconfig
index 513f431..7cd4666 100644
--- a/fs/reiserfs/Kconfig
+++ b/fs/reiserfs/Kconfig
@@ -10,7 +10,8 @@ config REISERFS_FS
 In general, ReiserFS is as fast as ext2, but is very efficient with
 large directories and small files.  Additional patches are needed


 for NFS and quotas, please see <http://www.namesys.com/> for links.




 for NFS and quotas, please see 


 <https://reiser4.wiki.kernel.org/index.php/Main_Page> for links.


It is more easily extended to have features currently found in
   database and keyword search systems than block allocation based file


@@ -18,7 +19,8 @@ config REISERFS_FS
     plugins consistent with our motto ``It takes more than a license to
     make source code open.''

 Read <http://www.namesys.com/> to learn more about reiserfs.




 Read <https://reiser4.wiki.kernel.org/index.php/Main_Page> 


 to learn more about reiserfs.


Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.


diff --git a/fs/reiserfs/README b/fs/reiserfs/README
index 14e8c9d..e2f7a26 100644
--- a/fs/reiserfs/README
+++ b/fs/reiserfs/README
@@ -43,7 +43,7 @@ to address the fair crediting issue in the next GPL version.)
 [END LICENSING]
Reiserfs is a file system based on balanced tree algorithms, which is
-described at http://devlinux.com/namesys.
+described at https://reiser4.wiki.kernel.org/index.php/Main_Page
Stop reading here.  Go there, then return.
diff --git a/include/crypto/gf128mul.h b/include/crypto/gf128mul.h
index 4086b8e..da2530e 100644
--- a/include/crypto/gf128mul.h
+++ b/include/crypto/gf128mul.h
@@ -54,8 +54,8 @@
/* Comment by Rik:





For some background on GF(2^128) see for example: http://-



csrc.nist.gov/CryptoToolkit/modes/proposedmodes/gcm/gcm-revised-spec.pdf





For some background on GF(2^128) see for example:



http://csrc.nist.gov/groups/ST/toolkit/BCM/documents/proposedmodes/gcm/gcm-r...

The elements of GF(2^128) := GF(2)[X]/(X^128-X^7-X^2-X^1-1) can
be mapped to computer memory in a variety of ways. Let's examine



diff --git a/include/linux/fdreg.h b/include/linux/fdreg.h
index c2eeb63..61ce641 100644
--- a/include/linux/fdreg.h
+++ b/include/linux/fdreg.h
@@ -89,7 +89,7 @@
 /* the following commands are new in the 82078. They are not used in the

floppy driver, except the first three. These commands may be useful for apps
which use the FDRAWCMD interface. For doc, get the 82078 spec sheets at



http://www-techdoc.intel.com/docs/periph/fd_contr/datasheets/ */





http://www.intel.com/design/archives/periphrl/docs/29046803.htm */



#define FD_PARTID		0x18	/* part id ("extended" version cmd) */
 #define FD_SAVE			0x2e	/* save fdc regs for later restore */
diff --git a/include/linux/if_infiniband.h b/include/linux/if_infiniband.h
index 3e659ec..7d95847 100644
--- a/include/linux/if_infiniband.h
+++ b/include/linux/if_infiniband.h
@@ -5,7 +5,7 @@

http://www.fsf.org/copyleft/gpl.html, or the OpenIB.org BSD
license, available in the LICENSE.TXT file accompanying this
software.  These details are also available at



http://openib.org/license.html.





http://www.openfabrics.org/software_license.htm.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF



diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h
index de24af7..54b8e0d 100644
--- a/include/linux/n_r3964.h
+++ b/include/linux/n_r3964.h
@@ -4,7 +4,6 @@

Copyright by
Philips Automation Projects
Kassel (Germany)



http://www.pap-philips.de


This software may be used and distributed according to the terms of
the GNU General Public License, incorporated herein by reference.



diff --git a/net/ax25/Kconfig b/net/ax25/Kconfig
index 2a72aa9..705e53e 100644
--- a/net/ax25/Kconfig
+++ b/net/ax25/Kconfig
@@ -7,7 +7,7 @@ menuconfig HAMRADIO
   bool "Amateur Radio support"
   help
     If you want to connect your Linux box to an amateur radio, answer Y

 here. You want to read <http://www.tapr.org/tapr/html/pkthome.html>




 here. You want to read <http://www.tapr.org/>

and more specifically about AX.25 on Linux
   http://www.linux-ax25.org/.

@@ -42,7 +42,7 @@ config AX25
     check out the file file:Documentation/networking/ax25.txt in the
     kernel source. More information about digital amateur radio in
     general is on the WWW at

 <http://www.tapr.org/tapr/html/pkthome.html>.




 <http://www.tapr.org/>.


To compile this driver as a module, choose M here: the
   module will be called ax25.


@@ -89,7 +89,7 @@ config NETROM
     http://www.linux-ax25.org. You also might want to check out the
     file file:Documentation/networking/ax25.txt. More information about
     digital amateur radio in general is on the WWW at

 <http://www.tapr.org/tapr/html/pkthome.html>.




 <http://www.tapr.org/>.


To compile this driver as a module, choose M here: the
   module will be called netrom.


@@ -108,7 +108,7 @@ config ROSE
     http://www.linux-ax25.org.  You also might want to check out the
     file file:Documentation/networking/ax25.txt. More information about
     digital amateur radio in general is on the WWW at

 <http://www.tapr.org/tapr/html/pkthome.html>.




 <http://www.tapr.org/>.


To compile this driver as a module, choose M here: the
   module will be called rose.


diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index 571f895..4123d5b 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -84,7 +84,7 @@ config IP_FIB_TRIE
 An experimental study of compression methods for dynamic tries
 Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002.


 http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/




 <http://www.csc.kth.se/~snilsson/software/dyntrie2/>




endchoice
@@ -555,7 +555,7 @@ config TCP_CONG_VENO
   distinguishing to circumvent the difficult judgment of the packet loss
   type. TCP Veno cuts down less congestion window in response to random
   loss packets.

See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf


See http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=1177186

config TCP_CONG_YEAH
   tristate "YeAH TCP"
diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c
index 3a92a76..094e150 100644
--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -9,7 +9,7 @@


The CIPSO draft specification can be found in the kernel's Documentation
directory as well as the following URL:



http://netlabel.sourceforge.net/files/draft-ietf-cipso-ipsecurity-01.txt





http://tools.ietf.org/id/draft-ietf-cipso-ipsecurity-01.txt
The FIPS-188 specification can be found at the following URL:
http://www.itl.nist.gov/fipspubs/fip188.htm




diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index 4a8e370..d9818c5 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -16,7 +16,7 @@


An experimental study of compression methods for dynamic tries
Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002.



http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/





http://www.csc.kth.se/~snilsson/software/dyntrie2/


IP-address lookup using LC-tries. Stefan Nilsson and Gunnar Karlsson



diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig
index 1833bdb..d048275 100644
--- a/net/ipv4/netfilter/Kconfig
+++ b/net/ipv4/netfilter/Kconfig
@@ -147,7 +147,7 @@ config IP_NF_TARGET_ULOG
     which can only be viewed through syslog.
 The appropriate userspace logging daemon (ulogd) may be obtained from


 <http://www.gnumonks.org/projects/ulogd/>




 <http://www.netfilter.org/projects/ulogd/index.html>


To compile it as a module, choose M here.  If unsure, say N.


diff --git a/net/ipv4/tcp_illinois.c b/net/ipv4/tcp_illinois.c
index 1eba160..00ca688 100644
--- a/net/ipv4/tcp_illinois.c
+++ b/net/ipv4/tcp_illinois.c
@@ -6,7 +6,7 @@

The algorithm is described in:
"TCP-Illinois: A Loss and Delay-Based Congestion Control Algorithm
for High-Speed Networks"



http://www.ews.uiuc.edu/~shaoliu/papersandslides/liubassri06perf.pdf





http://www.ifp.illinois.edu/~srikant/Papers/liubassri06perf.pdf

Implemented from description in paper and ns-2 simulation.
Copyright (C) 2007 Stephen Hemminger shemminger@linux-foundation.org



diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index e663b78..bccce34 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -428,10 +428,10 @@ EXPORT_SYMBOL(tcp_initialize_rcv_mss);


The algorithm for RTT estimation w/o timestamps is based on
Dynamic Right-Sizing (DRS) by Wu Feng and Mike Fisk of LANL.



http://www.lanl.gov/radiant/website/pubs/drs/lacsi2001.ps





http://public.lanl.gov/radiant/pubs.html#DRS

More detail on this code can be found at





http://www.psc.edu/~jheffner/senior_thesis.ps,





http://staff.psc.edu/jheffner/,
though this reference is out of date.  A new paper
is pending.

*/

diff --git a/net/ipv4/tcp_veno.c b/net/ipv4/tcp_veno.c
index b612acf..38bc0b5 100644
--- a/net/ipv4/tcp_veno.c
+++ b/net/ipv4/tcp_veno.c
@@ -6,7 +6,7 @@

"TCP Veno: TCP Enhancement for Transmission over Wireless Access Networks."
IEEE Journal on Selected Areas in Communication,
Feb. 2003.



See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf





See http://www.ie.cuhk.edu.hk/fileadmin/staff_upload/soung/Journal/J3.pdf

*/

#include <linux/mm.h>
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index c4c885d..3fb2b73 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -329,8 +329,8 @@ static unsigned int get_conntrack_index(const struct tcphdr *tcph)
 /* TCP connection tracking based on 'Real Stateful TCP Packet Filtering
    in IP Filter' by Guido van Rooij.

http://www.nluug.nl/events/sane2000/papers.html
http://www.iae.nl/users/guido/papers/tcp_filtering.ps.gz


http://www.sane.nl/events/sane2000/papers.html

http://www.darkart.com/mirrors/www.obfuscation.org/ipf/
The boundaries and the conditions are changed according to RFC793:
the packet must intersect the window (i.e. segments may be


diff --git a/sound/oss/ac97_codec.c b/sound/oss/ac97_codec.c
index 456a1b4..854c303 100644
--- a/sound/oss/ac97_codec.c
+++ b/sound/oss/ac97_codec.c
@@ -21,11 +21,8 @@









The Intel Audio Codec '97 specification is available at the Intel



audio homepage: http://developer.intel.com/ial/scalableplatforms/audio/







The specification itself is currently available at:



ftp://download.intel.com/ial/scalableplatforms/ac97r22.pdf





The Intel Audio Codec '97 specification is available at:



http://download.intel.com/support/motherboards/desktop/sb/ac97_r23.pdf








diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
index c7fba53..537cfba 100644
--- a/sound/pci/ens1370.c
+++ b/sound/pci/ens1370.c
@@ -22,7 +22,7 @@
 /* Power-Management-Code ( CONFIG_PM )

for ens1371 only ( FIXME )
derived from cs4281.c, atiixp.c and via82xx.c



using http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c1540.htm





using http://www.alsa-project.org/~tiwai/writing-an-alsa-driver/
by Kurt J. Bosch

*/

diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 4677492..400f9eb 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -716,7 +716,7 @@ static void snd_intel8x0_setup_periods(struct intel8x0 *chip, struct ichdev *ich

Intel 82443MX running a 100MHz processor system bus has a hardware bug,
which aborts PCI busmaster for audio transfer.  A workaround is to set
the pages as non-cached.  For details, see the errata in



http://www.intel.com/design/chipsets/specupdt/245051.htm





http://download.intel.com/design/chipsets/specupdt/24505108.pdf

*/

static void fill_nocache(void *buf, int size, int nocache)
 {

    

Re: [alsa-devel] [RFC v5]update broken web addresses in the kernel.

Finn Thain

Justin P. Mattock

Finn Thain

Justin P. Mattock

tags (0)

participants (2)