[alsa-devel] [PATCH] ASoC: cs42l51: add multi endpoint support
Support multiple endpoints on cs42L51 codec port when used in of_graph context.
This patch allows to share the codec port between two CPU DAIs.
Example:
STM32MP157C-DK2 board uses CS42L51 audio codec. This codec is connected to two serial audio interfaces, which are configured either as rx or tx.
From AsoC point of view the topolgy is the following:
// 2 CPU DAIs (SAI2A/B), 1 Codec (CS42L51) Playback: CPU-A-DAI(slave) -> (master)CODEC-DAI/port0 Record: CPU-B-DAI(slave) <- (master)CODEC-DAI/port0
In the DT two endpoints have to be associated to the codec port: cs42l51_port: port { cs42l51_tx_endpoint: endpoint@0 { remote-endpoint = <&sai2a_endpoint>; }; cs42l51_rx_endpoint: endpoint@1 { remote-endpoint = <&sai2b_endpoint>; }; };
However, when the audio graph card parses the codec nodes, it expects to find DAI interface indexes matching the endpoints indexes.
The current patch forces the use of DAI id 0 for both endpoints, which allows to share the codec DAI between the two CPU DAIs for playback and capture streams respectively.
Signed-off-by: Olivier Moysan olivier.moysan@st.com --- sound/soc/codecs/cs42l51.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/sound/soc/codecs/cs42l51.c b/sound/soc/codecs/cs42l51.c index fd2bd74024c1..80da3cd73e04 100644 --- a/sound/soc/codecs/cs42l51.c +++ b/sound/soc/codecs/cs42l51.c @@ -464,6 +464,13 @@ static int cs42l51_dai_mute(struct snd_soc_dai *dai, int mute) return snd_soc_component_write(component, CS42L51_DAC_OUT_CTL, reg); }
+static int cs42l51_of_xlate_dai_id(struct snd_soc_component *component, + struct device_node *endpoint) +{ + /* return dai id 0, whatever the endpoint index */ + return 0; +} + static const struct snd_soc_dai_ops cs42l51_dai_ops = { .hw_params = cs42l51_hw_params, .set_sysclk = cs42l51_set_dai_sysclk, @@ -526,6 +533,7 @@ static const struct snd_soc_component_driver soc_component_device_cs42l51 = { .num_dapm_widgets = ARRAY_SIZE(cs42l51_dapm_widgets), .dapm_routes = cs42l51_routes, .num_dapm_routes = ARRAY_SIZE(cs42l51_routes), + .of_xlate_dai_id = cs42l51_of_xlate_dai_id, .idle_bias_on = 1, .use_pmdown_time = 1, .endianness = 1,
The patch
ASoC: cs42l51: add multi endpoint support
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From ad6bb3067c4d7c684488eb9f8f8a32f623b12af3 Mon Sep 17 00:00:00 2001
From: Olivier Moysan olivier.moysan@st.com Date: Fri, 29 Mar 2019 16:37:37 +0100 Subject: [PATCH] ASoC: cs42l51: add multi endpoint support
Support multiple endpoints on cs42L51 codec port when used in of_graph context.
This patch allows to share the codec port between two CPU DAIs.
Example:
STM32MP157C-DK2 board uses CS42L51 audio codec. This codec is connected to two serial audio interfaces, which are configured either as rx or tx.
From AsoC point of view the topolgy is the following:
// 2 CPU DAIs (SAI2A/B), 1 Codec (CS42L51) Playback: CPU-A-DAI(slave) -> (master)CODEC-DAI/port0 Record: CPU-B-DAI(slave) <- (master)CODEC-DAI/port0
In the DT two endpoints have to be associated to the codec port: cs42l51_port: port { cs42l51_tx_endpoint: endpoint@0 { remote-endpoint = <&sai2a_endpoint>; }; cs42l51_rx_endpoint: endpoint@1 { remote-endpoint = <&sai2b_endpoint>; }; };
However, when the audio graph card parses the codec nodes, it expects to find DAI interface indexes matching the endpoints indexes.
The current patch forces the use of DAI id 0 for both endpoints, which allows to share the codec DAI between the two CPU DAIs for playback and capture streams respectively.
Signed-off-by: Olivier Moysan olivier.moysan@st.com Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/codecs/cs42l51.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/sound/soc/codecs/cs42l51.c b/sound/soc/codecs/cs42l51.c index fd2bd74024c1..80da3cd73e04 100644 --- a/sound/soc/codecs/cs42l51.c +++ b/sound/soc/codecs/cs42l51.c @@ -464,6 +464,13 @@ static int cs42l51_dai_mute(struct snd_soc_dai *dai, int mute) return snd_soc_component_write(component, CS42L51_DAC_OUT_CTL, reg); }
+static int cs42l51_of_xlate_dai_id(struct snd_soc_component *component, + struct device_node *endpoint) +{ + /* return dai id 0, whatever the endpoint index */ + return 0; +} + static const struct snd_soc_dai_ops cs42l51_dai_ops = { .hw_params = cs42l51_hw_params, .set_sysclk = cs42l51_set_dai_sysclk, @@ -526,6 +533,7 @@ static const struct snd_soc_component_driver soc_component_device_cs42l51 = { .num_dapm_widgets = ARRAY_SIZE(cs42l51_dapm_widgets), .dapm_routes = cs42l51_routes, .num_dapm_routes = ARRAY_SIZE(cs42l51_routes), + .of_xlate_dai_id = cs42l51_of_xlate_dai_id, .idle_bias_on = 1, .use_pmdown_time = 1, .endianness = 1,
participants (2)
-
Mark Brown -
Olivier Moysan