[alsa-devel] [PATCH] ALSA: dice: ensure transmission speed for transmitted packets
As of kernel 4.10, ALSA dice driver is expected to be used in default speed. In most cases, it's S400. While, IEEE 1394 specification describes the other speed such as S800.
According to 'TCD30XX User Guide', its link layer controller supports several transmission speed up to S800[0]. In Dice software interface, transmission speed in output direction can be configured by asynchronous transaction to 'TX_SPEED' offset in its address space. S800 may be available.
This commit improves configuration of transmission unit before starting packet streaming for this purpose. The value of 'max_speed' in 'fw_device' data structure has available maximum speed decided in bus arbitration, thus it's within capacity of the unit.
[0] TCD3xx User Guide - TCAT 1394 LLC, Revision 0.9.0-41360 (TC Applied Technologies, May 6 2015) http://www.tctechnologies.tc/index.php/support/support-hardware/dice-iii-det...
Signed-off-by: Takashi Sakamoto o-takashi@sakamocchi.jp --- sound/firewire/dice/dice-interface.h | 1 + sound/firewire/dice/dice-stream.c | 12 +++++++++++- 2 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/sound/firewire/dice/dice-interface.h b/sound/firewire/dice/dice-interface.h index 27b044f..47f2c0a 100644 --- a/sound/firewire/dice/dice-interface.h +++ b/sound/firewire/dice/dice-interface.h @@ -251,6 +251,7 @@
/* * The speed at which the packets are sent, SCODE_100-_400; read/write. + * SCODE_800 is only available in Dice III. */ #define TX_SPEED 0x014
diff --git a/sound/firewire/dice/dice-stream.c b/sound/firewire/dice/dice-stream.c index ec4db3a..8573289 100644 --- a/sound/firewire/dice/dice-stream.c +++ b/sound/firewire/dice/dice-stream.c @@ -195,6 +195,7 @@ static int start_streams(struct snd_dice *dice, enum amdtp_stream_direction dir, unsigned int i, pcm_chs, midi_ports; struct amdtp_stream *streams; struct fw_iso_resources *resources; + struct fw_device *fw_dev = fw_parent_device(dice->unit); int err = 0;
if (dir == AMDTP_IN_STREAM) { @@ -237,8 +238,17 @@ static int start_streams(struct snd_dice *dice, enum amdtp_stream_direction dir, if (err < 0) return err;
+ if (dir == AMDTP_IN_STREAM) { + reg[0] = cpu_to_be32(fw_dev->max_speed); + err = snd_dice_transaction_write_tx(dice, + params->size * i + TX_SPEED, + reg, sizeof(reg[0])); + if (err < 0) + return err; + } + err = amdtp_stream_start(&streams[i], resources[i].channel, - fw_parent_device(dice->unit)->max_speed); + fw_dev->max_speed); if (err < 0) return err; }
On Tue, 03 Jan 2017 04:44:43 +0100, Takashi Sakamoto wrote:
As of kernel 4.10, ALSA dice driver is expected to be used in default speed. In most cases, it's S400. While, IEEE 1394 specification describes the other speed such as S800.
According to 'TCD30XX User Guide', its link layer controller supports several transmission speed up to S800[0]. In Dice software interface, transmission speed in output direction can be configured by asynchronous transaction to 'TX_SPEED' offset in its address space. S800 may be available.
This commit improves configuration of transmission unit before starting packet streaming for this purpose. The value of 'max_speed' in 'fw_device' data structure has available maximum speed decided in bus arbitration, thus it's within capacity of the unit.
[0] TCD3xx User Guide - TCAT 1394 LLC, Revision 0.9.0-41360 (TC Applied Technologies, May 6 2015) http://www.tctechnologies.tc/index.php/support/support-hardware/dice-iii-det...
Signed-off-by: Takashi Sakamoto o-takashi@sakamocchi.jp
Thanks, applied now.
Takashi
participants (2)
-
Takashi Iwai
-
Takashi Sakamoto