[alsa-devel] [PATCH] ASoC: rt5514: expose Hotword Model control
This change exposes mixer control 'Hotword Model' for switching hotword model in runtime. This new function requires updated firmware to load hotword model at address 0x4ff80000.
Note that if the rt5514-spi driver is not enabled in kernel, hotword model will not be loaded when "DSP Voice Wake Up" is set to turn on DSP mode, and an error is logged instead.
Signed-off-by: Hsin-Yu Chao hychao@chromium.org --- sound/soc/codecs/rt5514.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/rt5514.h | 3 +++ 2 files changed, 66 insertions(+)
diff --git a/sound/soc/codecs/rt5514.c b/sound/soc/codecs/rt5514.c index a2722177470e..250581082e9d 100644 --- a/sound/soc/codecs/rt5514.c +++ b/sound/soc/codecs/rt5514.c @@ -335,6 +335,39 @@ static int rt5514_dsp_voice_wake_up_put(struct snd_kcontrol *kcontrol, fw = NULL; }
+ if (rt5514->model_buf && rt5514->model_len) { +#if IS_ENABLED(CONFIG_SND_SOC_RT5514_SPI) + int ret; + + ret = rt5514_spi_burst_write(0x4ff80000, + rt5514->model_buf, + ((rt5514->model_len / 8) + 1) * 8); + if (ret) { + dev_err(codec->dev, + "Model load failed %d\n", ret); + return ret; + } +#else + dev_err(codec->dev, + "No SPI driver for loading firmware\n"); +#endif + } else { + request_firmware(&fw, RT5514_FIRMWARE3, + codec->dev); + if (fw) { +#if IS_ENABLED(CONFIG_SND_SOC_RT5514_SPI) + rt5514_spi_burst_write(0x4ff80000, + fw->data, + ((fw->size/8)+1)*8); +#else + dev_err(codec->dev, + "No SPI driver to load fw\n"); +#endif + release_firmware(fw); + fw = NULL; + } + } + /* DSP run */ regmap_write(rt5514->i2c_regmap, 0x18002f00, 0x00055148); @@ -349,6 +382,34 @@ static int rt5514_dsp_voice_wake_up_put(struct snd_kcontrol *kcontrol, return 0; }
+static int rt5514_hotword_model_put(struct snd_kcontrol *kcontrol, + const unsigned int __user *bytes, unsigned int size) +{ + struct snd_soc_component *component = snd_kcontrol_chip(kcontrol); + struct rt5514_priv *rt5514 = snd_soc_component_get_drvdata(component); + struct snd_soc_codec *codec = rt5514->codec; + int ret = 0; + + if (rt5514->model_buf || rt5514->model_len < size) { + if (rt5514->model_buf) + devm_kfree(codec->dev, rt5514->model_buf); + rt5514->model_buf = devm_kmalloc(codec->dev, size, GFP_KERNEL); + if (!rt5514->model_buf) { + ret = -ENOMEM; + goto done; + } + } + + /* Skips the TLV header. */ + bytes += 2; + + if (copy_from_user(rt5514->model_buf, bytes, size)) + ret = -EFAULT; +done: + rt5514->model_len = (ret ? 0 : size); + return ret; +} + static const struct snd_kcontrol_new rt5514_snd_controls[] = { SOC_DOUBLE_TLV("MIC Boost Volume", RT5514_ANA_CTRL_MICBST, RT5514_SEL_BSTL_SFT, RT5514_SEL_BSTR_SFT, 8, 0, bst_tlv), @@ -360,6 +421,8 @@ static const struct snd_kcontrol_new rt5514_snd_controls[] = { adc_vol_tlv), SOC_SINGLE_EXT("DSP Voice Wake Up", SND_SOC_NOPM, 0, 1, 0, rt5514_dsp_voice_wake_up_get, rt5514_dsp_voice_wake_up_put), + SND_SOC_BYTES_TLV("Hotword Model", 0x8504, + NULL, rt5514_hotword_model_put), };
/* ADC Mixer*/ diff --git a/sound/soc/codecs/rt5514.h b/sound/soc/codecs/rt5514.h index 02bc212a86d9..07475a9918d2 100644 --- a/sound/soc/codecs/rt5514.h +++ b/sound/soc/codecs/rt5514.h @@ -236,6 +236,7 @@
#define RT5514_FIRMWARE1 "rt5514_dsp_fw1.bin" #define RT5514_FIRMWARE2 "rt5514_dsp_fw2.bin" +#define RT5514_FIRMWARE3 "rt5514_dsp_fw3.bin"
/* System Clock Source */ enum { @@ -262,6 +263,8 @@ struct rt5514_priv { int pll_in; int pll_out; int dsp_enabled; + u8 *model_buf; + unsigned int model_len; };
#endif /* __RT5514_H__ */
Please ignore this commit. I create this as a re-land of an earlier commit which got reverted on linux-next. And Oder pointed out doing this is incorrect because I need to create commit applying to Mark's branch.
Sorry for the confusion.
Hsin-yu
On Mon, Aug 28, 2017 at 2:36 PM, Hsin-Yu Chao hychao@chromium.org wrote:
This change exposes mixer control 'Hotword Model' for switching hotword model in runtime. This new function requires updated firmware to load hotword model at address 0x4ff80000.
Note that if the rt5514-spi driver is not enabled in kernel, hotword model will not be loaded when "DSP Voice Wake Up" is set to turn on DSP mode, and an error is logged instead.
Signed-off-by: Hsin-Yu Chao hychao@chromium.org
sound/soc/codecs/rt5514.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/rt5514.h | 3 +++ 2 files changed, 66 insertions(+)
diff --git a/sound/soc/codecs/rt5514.c b/sound/soc/codecs/rt5514.c index a2722177470e..250581082e9d 100644 --- a/sound/soc/codecs/rt5514.c +++ b/sound/soc/codecs/rt5514.c @@ -335,6 +335,39 @@ static int rt5514_dsp_voice_wake_up_put(struct snd_kcontrol *kcontrol, fw = NULL; }
if (rt5514->model_buf && rt5514->model_len) {
+#if IS_ENABLED(CONFIG_SND_SOC_RT5514_SPI)
int ret;
ret = rt5514_spi_burst_write(0x4ff80000,
rt5514->model_buf,
((rt5514->model_len / 8) + 1) * 8);
if (ret) {
dev_err(codec->dev,
"Model load failed %d\n", ret);
return ret;
}
+#else
dev_err(codec->dev,
"No SPI driver for loading firmware\n");
+#endif
} else {
request_firmware(&fw, RT5514_FIRMWARE3,
codec->dev);
if (fw) {
+#if IS_ENABLED(CONFIG_SND_SOC_RT5514_SPI)
rt5514_spi_burst_write(0x4ff80000,
fw->data,
((fw->size/8)+1)*8);
+#else
dev_err(codec->dev,
"No SPI driver to load fw\n");
+#endif
release_firmware(fw);
fw = NULL;
}
}
/* DSP run */ regmap_write(rt5514->i2c_regmap, 0x18002f00, 0x00055148);
@@ -349,6 +382,34 @@ static int rt5514_dsp_voice_wake_up_put(struct snd_kcontrol *kcontrol, return 0; }
+static int rt5514_hotword_model_put(struct snd_kcontrol *kcontrol,
const unsigned int __user *bytes, unsigned int size)
+{
struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
struct rt5514_priv *rt5514 = snd_soc_component_get_drvdata(component);
struct snd_soc_codec *codec = rt5514->codec;
int ret = 0;
if (rt5514->model_buf || rt5514->model_len < size) {
if (rt5514->model_buf)
devm_kfree(codec->dev, rt5514->model_buf);
rt5514->model_buf = devm_kmalloc(codec->dev, size, GFP_KERNEL);
if (!rt5514->model_buf) {
ret = -ENOMEM;
goto done;
}
}
/* Skips the TLV header. */
bytes += 2;
if (copy_from_user(rt5514->model_buf, bytes, size))
ret = -EFAULT;
+done:
rt5514->model_len = (ret ? 0 : size);
return ret;
+}
static const struct snd_kcontrol_new rt5514_snd_controls[] = { SOC_DOUBLE_TLV("MIC Boost Volume", RT5514_ANA_CTRL_MICBST, RT5514_SEL_BSTL_SFT, RT5514_SEL_BSTR_SFT, 8, 0, bst_tlv), @@ -360,6 +421,8 @@ static const struct snd_kcontrol_new rt5514_snd_controls[] = { adc_vol_tlv), SOC_SINGLE_EXT("DSP Voice Wake Up", SND_SOC_NOPM, 0, 1, 0, rt5514_dsp_voice_wake_up_get, rt5514_dsp_voice_wake_up_put),
SND_SOC_BYTES_TLV("Hotword Model", 0x8504,
NULL, rt5514_hotword_model_put),
};
/* ADC Mixer*/ diff --git a/sound/soc/codecs/rt5514.h b/sound/soc/codecs/rt5514.h index 02bc212a86d9..07475a9918d2 100644 --- a/sound/soc/codecs/rt5514.h +++ b/sound/soc/codecs/rt5514.h @@ -236,6 +236,7 @@
#define RT5514_FIRMWARE1 "rt5514_dsp_fw1.bin" #define RT5514_FIRMWARE2 "rt5514_dsp_fw2.bin" +#define RT5514_FIRMWARE3 "rt5514_dsp_fw3.bin"
/* System Clock Source */ enum { @@ -262,6 +263,8 @@ struct rt5514_priv { int pll_in; int pll_out; int dsp_enabled;
u8 *model_buf;
unsigned int model_len;
};
#endif /* __RT5514_H__ */
2.12.2
participants (1)
-
Hsin-Yu Chao