[alsa-devel] [PATCH] ASoC: fsl_sai: Implement set_bclk_ratio
![](https://secure.gravatar.com/avatar/d75e3142f5cbc42f680d366974fb42b9.jpg?s=120&d=mm&r=g)
From: Viorel Suman viorel.suman@nxp.com
This is to allow machine drivers to set a certain bitclk rate which might not be exactly rate * frame size.
Cc: NXP Linux Team linux-imx@nxp.com Signed-off-by: Viorel Suman viorel.suman@nxp.com Signed-off-by: Daniel Baluta daniel.baluta@nxp.com --- sound/soc/fsl/fsl_sai.c | 21 +++++++++++++++++++-- sound/soc/fsl/fsl_sai.h | 1 + 2 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index fe126029f4e3..e896b577b1f7 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -137,6 +137,16 @@ static int fsl_sai_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, u32 tx_mask, return 0; }
+static int fsl_sai_set_dai_bclk_ratio(struct snd_soc_dai *dai, + unsigned int ratio) +{ + struct fsl_sai *sai = snd_soc_dai_get_drvdata(dai); + + sai->bclk_ratio = ratio; + + return 0; +} + static int fsl_sai_set_dai_sysclk_tr(struct snd_soc_dai *cpu_dai, int clk_id, unsigned int freq, int fsl_dir) { @@ -423,8 +433,14 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream, slot_width = sai->slot_width;
if (!sai->is_slave_mode) { - ret = fsl_sai_set_bclk(cpu_dai, tx, - slots * slot_width * params_rate(params)); + if (sai->bclk_ratio) + ret = fsl_sai_set_bclk(cpu_dai, tx, + sai->bclk_ratio * + params_rate(params)); + else + ret = fsl_sai_set_bclk(cpu_dai, tx, + slots * slot_width * + params_rate(params)); if (ret) return ret;
@@ -640,6 +656,7 @@ static void fsl_sai_shutdown(struct snd_pcm_substream *substream, }
static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = { + .set_bclk_ratio = fsl_sai_set_dai_bclk_ratio, .set_sysclk = fsl_sai_set_dai_sysclk, .set_fmt = fsl_sai_set_dai_fmt, .set_tdm_slot = fsl_sai_set_dai_tdm_slot, diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h index 3a3f6f8e5595..f96f8d97489d 100644 --- a/sound/soc/fsl/fsl_sai.h +++ b/sound/soc/fsl/fsl_sai.h @@ -177,6 +177,7 @@ struct fsl_sai { unsigned int mclk_streams; unsigned int slots; unsigned int slot_width; + unsigned int bclk_ratio;
const struct fsl_sai_soc_data *soc_data; struct snd_dmaengine_dai_dma_data dma_params_rx;
![](https://secure.gravatar.com/avatar/f606eae2e3451996df5c7604a199107c.jpg?s=120&d=mm&r=g)
On Sat, Aug 31, 2019 at 12:59:10AM +0300, Daniel Baluta wrote:
From: Viorel Suman viorel.suman@nxp.com
This is to allow machine drivers to set a certain bitclk rate which might not be exactly rate * frame size.
Just a quick thought of mine: slot_width and slots could be set via set_dai_tdm_slot() actually, while set_bclk_ratio() would override that one with your change. I'm not sure which one could be more important...so would you mind elaborating your use case?
Thanks Nicolin
Cc: NXP Linux Team linux-imx@nxp.com Signed-off-by: Viorel Suman viorel.suman@nxp.com Signed-off-by: Daniel Baluta daniel.baluta@nxp.com
sound/soc/fsl/fsl_sai.c | 21 +++++++++++++++++++-- sound/soc/fsl/fsl_sai.h | 1 + 2 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index fe126029f4e3..e896b577b1f7 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -137,6 +137,16 @@ static int fsl_sai_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, u32 tx_mask, return 0; }
+static int fsl_sai_set_dai_bclk_ratio(struct snd_soc_dai *dai,
unsigned int ratio)
+{
- struct fsl_sai *sai = snd_soc_dai_get_drvdata(dai);
- sai->bclk_ratio = ratio;
- return 0;
+}
static int fsl_sai_set_dai_sysclk_tr(struct snd_soc_dai *cpu_dai, int clk_id, unsigned int freq, int fsl_dir) { @@ -423,8 +433,14 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream, slot_width = sai->slot_width;
if (!sai->is_slave_mode) {
ret = fsl_sai_set_bclk(cpu_dai, tx,
slots * slot_width * params_rate(params));
if (sai->bclk_ratio)
ret = fsl_sai_set_bclk(cpu_dai, tx,
sai->bclk_ratio *
params_rate(params));
else
ret = fsl_sai_set_bclk(cpu_dai, tx,
slots * slot_width *
if (ret) return ret;params_rate(params));
@@ -640,6 +656,7 @@ static void fsl_sai_shutdown(struct snd_pcm_substream *substream, }
static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = {
- .set_bclk_ratio = fsl_sai_set_dai_bclk_ratio, .set_sysclk = fsl_sai_set_dai_sysclk, .set_fmt = fsl_sai_set_dai_fmt, .set_tdm_slot = fsl_sai_set_dai_tdm_slot,
diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h index 3a3f6f8e5595..f96f8d97489d 100644 --- a/sound/soc/fsl/fsl_sai.h +++ b/sound/soc/fsl/fsl_sai.h @@ -177,6 +177,7 @@ struct fsl_sai { unsigned int mclk_streams; unsigned int slots; unsigned int slot_width;
unsigned int bclk_ratio;
const struct fsl_sai_soc_data *soc_data; struct snd_dmaengine_dai_dma_data dma_params_rx;
-- 2.17.1
![](https://secure.gravatar.com/avatar/d930951cb00393ecf9c3db3a56d78fa9.jpg?s=120&d=mm&r=g)
On Thu, Sep 05, 2019 at 06:29:39PM -0700, Nicolin Chen wrote:
On Sat, Aug 31, 2019 at 12:59:10AM +0300, Daniel Baluta wrote:
This is to allow machine drivers to set a certain bitclk rate which might not be exactly rate * frame size.
Just a quick thought of mine: slot_width and slots could be set via set_dai_tdm_slot() actually, while set_bclk_ratio() would override that one with your change. I'm not sure which one could be more important...so would you mind elaborating your use case?
The reason we have both operations is partly that some hardware can configure the ratio but not do TDM and partly that setting TDM slots forces us to configure the slot size depending on the current stream configuration while just setting the ratio means we can just fix the configuration once. I'd say it's just a user error to try to do both simultaneously.
![](https://secure.gravatar.com/avatar/966ff70f0f521a8f4e5ef9206d2a7912.jpg?s=120&d=mm&r=g)
On Wed, Sep 11, 2019 at 2:01 PM Mark Brown broonie@kernel.org wrote:
On Thu, Sep 05, 2019 at 06:29:39PM -0700, Nicolin Chen wrote:
On Sat, Aug 31, 2019 at 12:59:10AM +0300, Daniel Baluta wrote:
This is to allow machine drivers to set a certain bitclk rate which might not be exactly rate * frame size.
Just a quick thought of mine: slot_width and slots could be set via set_dai_tdm_slot() actually, while set_bclk_ratio() would override that one with your change. I'm not sure which one could be more important...so would you mind elaborating your use case?
The reason we have both operations is partly that some hardware can configure the ratio but not do TDM and partly that setting TDM slots forces us to configure the slot size depending on the current stream configuration while just setting the ratio means we can just fix the configuration once. I'd say it's just a user error to try to do both simultaneously.
Yes, exactly. We wanted to have a better control of bclk freq. Sorry for the late answer, I'm traveling.
![](https://secure.gravatar.com/avatar/f606eae2e3451996df5c7604a199107c.jpg?s=120&d=mm&r=g)
On Wed, Sep 11, 2019 at 04:06:41PM +0300, Daniel Baluta wrote:
On Wed, Sep 11, 2019 at 2:01 PM Mark Brown broonie@kernel.org wrote:
On Thu, Sep 05, 2019 at 06:29:39PM -0700, Nicolin Chen wrote:
On Sat, Aug 31, 2019 at 12:59:10AM +0300, Daniel Baluta wrote:
This is to allow machine drivers to set a certain bitclk rate which might not be exactly rate * frame size.
Just a quick thought of mine: slot_width and slots could be set via set_dai_tdm_slot() actually, while set_bclk_ratio() would override that one with your change. I'm not sure which one could be more important...so would you mind elaborating your use case?
The reason we have both operations is partly that some hardware can configure the ratio but not do TDM and partly that setting TDM slots forces us to configure the slot size depending on the current stream configuration while just setting the ratio means we can just fix the configuration once. I'd say it's just a user error to try to do both simultaneously.
Yes, exactly. We wanted to have a better control of bclk freq. Sorry for the late answer, I'm traveling.
I see. Thanks for the explain. Just acked.
![](https://secure.gravatar.com/avatar/f606eae2e3451996df5c7604a199107c.jpg?s=120&d=mm&r=g)
On Sat, Aug 31, 2019 at 12:59:10AM +0300, Daniel Baluta wrote:
From: Viorel Suman viorel.suman@nxp.com
This is to allow machine drivers to set a certain bitclk rate which might not be exactly rate * frame size.
Cc: NXP Linux Team linux-imx@nxp.com Signed-off-by: Viorel Suman viorel.suman@nxp.com Signed-off-by: Daniel Baluta daniel.baluta@nxp.com
Acked-by: Nicolin Chen nicoleotsuka@gmail.com
sound/soc/fsl/fsl_sai.c | 21 +++++++++++++++++++-- sound/soc/fsl/fsl_sai.h | 1 + 2 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index fe126029f4e3..e896b577b1f7 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -137,6 +137,16 @@ static int fsl_sai_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, u32 tx_mask, return 0; }
+static int fsl_sai_set_dai_bclk_ratio(struct snd_soc_dai *dai,
unsigned int ratio)
+{
- struct fsl_sai *sai = snd_soc_dai_get_drvdata(dai);
- sai->bclk_ratio = ratio;
- return 0;
+}
static int fsl_sai_set_dai_sysclk_tr(struct snd_soc_dai *cpu_dai, int clk_id, unsigned int freq, int fsl_dir) { @@ -423,8 +433,14 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream, slot_width = sai->slot_width;
if (!sai->is_slave_mode) {
ret = fsl_sai_set_bclk(cpu_dai, tx,
slots * slot_width * params_rate(params));
if (sai->bclk_ratio)
ret = fsl_sai_set_bclk(cpu_dai, tx,
sai->bclk_ratio *
params_rate(params));
else
ret = fsl_sai_set_bclk(cpu_dai, tx,
slots * slot_width *
if (ret) return ret;params_rate(params));
@@ -640,6 +656,7 @@ static void fsl_sai_shutdown(struct snd_pcm_substream *substream, }
static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = {
- .set_bclk_ratio = fsl_sai_set_dai_bclk_ratio, .set_sysclk = fsl_sai_set_dai_sysclk, .set_fmt = fsl_sai_set_dai_fmt, .set_tdm_slot = fsl_sai_set_dai_tdm_slot,
diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h index 3a3f6f8e5595..f96f8d97489d 100644 --- a/sound/soc/fsl/fsl_sai.h +++ b/sound/soc/fsl/fsl_sai.h @@ -177,6 +177,7 @@ struct fsl_sai { unsigned int mclk_streams; unsigned int slots; unsigned int slot_width;
unsigned int bclk_ratio;
const struct fsl_sai_soc_data *soc_data; struct snd_dmaengine_dai_dma_data dma_params_rx;
-- 2.17.1
![](https://secure.gravatar.com/avatar/d930951cb00393ecf9c3db3a56d78fa9.jpg?s=120&d=mm&r=g)
The patch
ASoC: fsl_sai: Implement set_bclk_ratio
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.4
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 63d1a3488ff58e094a7f517cf93c0250f0a3f6be Mon Sep 17 00:00:00 2001
From: Viorel Suman viorel.suman@nxp.com Date: Sat, 31 Aug 2019 00:59:10 +0300 Subject: [PATCH] ASoC: fsl_sai: Implement set_bclk_ratio
This is to allow machine drivers to set a certain bitclk rate which might not be exactly rate * frame size.
Cc: NXP Linux Team linux-imx@nxp.com Signed-off-by: Viorel Suman viorel.suman@nxp.com Signed-off-by: Daniel Baluta daniel.baluta@nxp.com Acked-by: Nicolin Chen nicoleotsuka@gmail.com Link: https://lore.kernel.org/r/20190830215910.31590-1-daniel.baluta@nxp.com Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/fsl/fsl_sai.c | 21 +++++++++++++++++++-- sound/soc/fsl/fsl_sai.h | 1 + 2 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index 728307acab90..ef0b74693093 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -137,6 +137,16 @@ static int fsl_sai_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, u32 tx_mask, return 0; }
+static int fsl_sai_set_dai_bclk_ratio(struct snd_soc_dai *dai, + unsigned int ratio) +{ + struct fsl_sai *sai = snd_soc_dai_get_drvdata(dai); + + sai->bclk_ratio = ratio; + + return 0; +} + static int fsl_sai_set_dai_sysclk_tr(struct snd_soc_dai *cpu_dai, int clk_id, unsigned int freq, int fsl_dir) { @@ -423,8 +433,14 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream, slot_width = sai->slot_width;
if (!sai->is_slave_mode) { - ret = fsl_sai_set_bclk(cpu_dai, tx, - slots * slot_width * params_rate(params)); + if (sai->bclk_ratio) + ret = fsl_sai_set_bclk(cpu_dai, tx, + sai->bclk_ratio * + params_rate(params)); + else + ret = fsl_sai_set_bclk(cpu_dai, tx, + slots * slot_width * + params_rate(params)); if (ret) return ret;
@@ -630,6 +646,7 @@ static void fsl_sai_shutdown(struct snd_pcm_substream *substream, }
static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = { + .set_bclk_ratio = fsl_sai_set_dai_bclk_ratio, .set_sysclk = fsl_sai_set_dai_sysclk, .set_fmt = fsl_sai_set_dai_fmt, .set_tdm_slot = fsl_sai_set_dai_tdm_slot, diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h index b89b0ca26053..b12cb578f6d0 100644 --- a/sound/soc/fsl/fsl_sai.h +++ b/sound/soc/fsl/fsl_sai.h @@ -176,6 +176,7 @@ struct fsl_sai { unsigned int mclk_streams; unsigned int slots; unsigned int slot_width; + unsigned int bclk_ratio;
const struct fsl_sai_soc_data *soc_data; struct snd_dmaengine_dai_dma_data dma_params_rx;
participants (4)
-
Daniel Baluta
-
Daniel Baluta
-
Mark Brown
-
Nicolin Chen